-
NETGEAR DS508 - page 1
...
-
NETGEAR DS508 - page 2
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide The NETGEAR Model DS508, Model DS516, and Model DS524 Dual Speed Stackable Hubs are network hubs that enable users to mix and match 10 and 100 meg abit per second (Mbps) devices on the same network. This mix of devices eliminates the high cost and comple xity of separate network eq ...
-
NETGEAR DS508 - page 3
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide V erify that the package contains the following items: • Model DS508, Model DS516, or Model DS524 hub • Rack mount kit • Cascade cable • Rubber footpads for tabletop installation • W arranty & Owner Re gistration Card • Power cord Caution: Use the appropriate power ...
-
NETGEAR DS508 - page 4
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide The Model DS508, Model DS516, and Model DS524 hubs can be used for connecting users to shared network resources such as servers, printers, and routers. All models allo w for easy migration from 10 Mbps to 100 Mbps operation. Users connected at 10 Mbps can coexist with power users c ...
-
NETGEAR DS508 - page 5
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Front Panel of the Model DS508 Hub Front Panel of the Model DS516 Hub Front Panel of the Model DS524 Hub Normal/Uplink 8 7 6 5 100 10 4 3 2 1 100M 10M On=Link, Blinking=Receive On=Link, Blinking=Receive Power 1 10 20 >40 10 Mbps 100 Mbps Utilization% Collision Dual Speed Stackab ...
-
NETGEAR DS508 - page 6
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Front-P anel LEDs The Model DS508, DS516, and DS524 hubs provide front-panel LEDs for monitoring indi vidual ports and hub status. The follo wing table describes the front-panel LEDs and their functions. Vista RJ-45 Network P orts with Built-In LEDs The front panel of the Model DS5 ...
-
NETGEAR DS508 - page 7
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Rear P anel The rear panel of a Model DS508, Model DS516, and Model DS524 hub has two LEDs, one labeled T erminator and one labeled 10/100 Mbps Bridge. The T erminator LED indicates whether or not the built-in terminator in that hub is acti v e (the b uilt-in terminator eliminates ...
-
NETGEAR DS508 - page 8
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Rack requirements Standard 19-inch (48.26 cm) EIA equipment rack, with supplied mounting brack et hardware; 1.0 EIA rac k-mount spaces needed for each hub . Wiring hardware Wir ing hardware, such as punchdo wn blocks or patch panels, should be complete before installing the hub . ...
-
NETGEAR DS508 - page 9
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Install the Hub on a Flat Surface If installing the hub on a fl at surface such as a tabletop, make sure the bottom of the chassis is clean and dry and allow at least 2 inches of space on all sides of the hub to ensure proper ventilation. 1. Install the self-adhesive f ootpads on ...
-
NETGEAR DS508 - page 10
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Cascade up to Eight Hubs to Build a Larger Netw ork As many as eight Model DS508, Model DS516, or Model DS524 hubs can be cascaded for up to a maximum of 192 ports in a single repeater (or collision) domain. Any de vice connected to one of the 192 ports at either 10 or 100 Mbps can ...
-
NETGEAR DS508 - page 11
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Set Normal/Uplink Push Button The Normal/Uplink push button on the front panel of the hub allo ws you to select the Uplink (MDI) or Normal (MDI-X) position for port 8 on the Model DS508 hub, port 16 on the Model DS516 hub, and port 24 on the Model DS524 hub . All other ports are wi ...
-
NETGEAR DS508 - page 12
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide T wisted P air Cables For two de vices to communicate, the transmitter of each device must be connected to the recei ver of the other device. The crossover function is usually implemented internally as part of the circuitry in the device. Most repeaters and switch ports are media-d ...
-
NETGEAR DS508 - page 13
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide RJ-45 Connector Pin Assignment Normal Assignment on P orts 1–8, 1–16, or 1–24 Uplink Assignment on P ort 8, 16, or 24 1 Input Receive Data + Output T r ansmit Data + 2 Input Receive Data - Output T r ansmit Data - 3 Output T r ansmit Data + Input Receive Data + 6 Output T r a ...
-
NETGEAR DS508 - page 14
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide Specification Model DS508 Model DS516 Model DS524 RJ-45 Network P or ts 8 P or ts 16 Ports 24 P or ts Dimensions Width: Height: Depth: 13.0 in. (330 mm) 1.7 in. (43 mm) 8 in. (202 mm) W eight 4.7 lb (2.1 kg) 4.9 lb (2.2 kg) 5.1 lb (2.3 kg) AC Pow e r 0.5 Amps maximum Input V oltag ...
-
NETGEAR DS508 - page 15
Model DS508/DS516/DS524 Dual Speed Stackable Hub Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. T rademarks NETGEAR ™ is a trademark of NETGEAR, Inc. W indows ® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of their respectiv e holders. Information is s ...
-
NETGEAR DS508 - page 16
Customer Support Phone Australia: 1800-787-638 Austria: 00800-06384327 (00800-0-NETGEAR) Denmark: 808-82179 Canada: 1-888-NETGEAR Finland: 0800-111-036 France: 0800-77-17-53 Germany: 00800-06384327 (00800-0-NETGEAR) Hong K ong: 001-800-1233-4566 Japan: 0120-66-5402 Internet/W orld Wide W eb The NETGEAR W eb page is at http://www .NETGEAR.com . Defe ...
Do you have a question concerning NETGEAR DS508?
Use the form below
If you did not solve your problem by using a manual NETGEAR DS508, ask a question using the form below. If a user had a similar problem with NETGEAR DS508 it is likely that he will want to share the way to solve it.