-
Zanussi ZWF 1241 W - page 1
W ASHING MACHINE ZWF 1241 W ZWF 1441 W 900 700 500 Delicates 60°C 50°C 95°C 40°C Prewash 30°C Wool On/Off Cottons Synthetics Temp. Spin Skip Start/ Pause Rinse Hold Reset ZWF 1241 W Prewash Wash Rinse Rinse Hold Spin Drain Filter End 1200 Half Load 40° AA HYDROSYSTEM 6 kg 1200 INSTRUCTION BOOKLET 132984770 GB Quick Installation Guide: visit o ...
-
Zanussi ZWF 1241 W - page 2
2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...
-
Zanussi ZWF 1241 W - page 3
3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child safety feature 5 The Control Panel 6-8 T urning the acoustic signal of f 6 Operating Sequence 9-1 1 Load the laundry 9 Measure out the detergent 9 Measure out the fabric softener 9 Switch the machin ...
-
Zanussi ZWF 1241 W - page 4
4 Y our New W ashing Machine Y our new washing machine meets all modern requirements for ef fective tr eatment of laundry with low water , energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric. ● The possibility of selec ...
-
Zanussi ZWF 1241 W - page 5
5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Drain pump 5 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener Child safety f eatur e This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. T o activat ...
-
Zanussi ZWF 1241 W - page 6
1 “On/Off ” button Press this button to switch the washing machine on. Press the On/Off button again to switch the machine off. 2 MAINS-ON light This light is connected to the “ On/Off ” button. It lights up when you press the button, and goes out when you press it again. 3 F ABRICS button Press this button repeatedly to select the programm ...
-
Zanussi ZWF 1241 W - page 7
7 T o complete the cycle, press “ Skip Reset ” button once , all the leds are off, then choose one of the following options: • Drain only: press F ABRIC button in order to select the desired programme and press the “ Skip Reset ” button until the only led “ Drain ” illuminates. Depress “ S tart/Pause” button • Drain and Spin: pr ...
-
Zanussi ZWF 1241 W - page 8
The “ Skip ” button is then used to cancel or advance the programme to the required phase. The “ Skip ” button can only operate during the selection of the programmes or when the programme is in pause. A normal wash cycle consists of the following phases, W ash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s. ...
-
Zanussi ZWF 1241 W - page 9
9 Operating Sequence Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the ...
-
Zanussi ZWF 1241 W - page 10
10 7. Select the spin speed or the Rinse Hold option Press the “ Spin ” button repeatedly , in order to select the desired spin speed or the “Rinse Hold” option. The relevant light will light up. If you select the Rinse Hold option, the machine will stop at the end of the programme with the water still in the tub. ZWF 1241 W ZWF 1441 W 8. S ...
-
Zanussi ZWF 1241 W - page 11
11 12. Ho w to open the door during the cycle of a pr ogr amme Y ou can open the door , after having set the washing machine to Pause, provided the following conditions exist: • the washing machine is not in the heating phase beyond 55°C; • the level of the water is not high; • the drum is not turning. If these requirements are met, when you ...
-
Zanussi ZWF 1241 W - page 12
12 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2 ...
-
Zanussi ZWF 1241 W - page 13
13 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR ...
-
Zanussi ZWF 1241 W - page 14
14 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING ...
-
Zanussi ZWF 1241 W - page 15
15 W ashing pr ogrammes * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. ** Only at the temperature of 40°C or higher . *** The “ C ...
-
Zanussi ZWF 1241 W - page 16
16 16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening ...
-
Zanussi ZWF 1241 W - page 17
17 • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover . • Remove any objects from the pump impeller by rotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump cover fully in. • Clos ...
-
Zanussi ZWF 1241 W - page 18
18 The door will not open ● The water level is above the bottom edge of the door . ● The machine is heating the water . ● The drum is turning. Something Not W orking Certain problems ar e due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service For ce Ce ...
-
Zanussi ZWF 1241 W - page 19
Symptom Possible causes 19 19 Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume ...
-
Zanussi ZWF 1241 W - page 20
20 20 Guarantee Conditions Standar d guar antee conditions W e, Zanussi Electrolux, undertake that if, within 12 months of the date of the purchase, this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF ANY CHARGE f ...
-
Zanussi ZWF 1241 W - page 21
21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
Zanussi ZWF 1241 W - page 22
22 22 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses ...
-
Zanussi ZWF 1241 W - page 23
23 W ater inlet Connect the hose to a tap with a 3/4” thread. Do not use already employed hoses. Always use the hose supplied with the appliance to connect to the water supply . Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply . A minimum water p ...
-
Zanussi ZWF 1241 W - page 24
24 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine. The drain hose may be extended to ...
-
Zanussi ZWF 1241 W - page 25
25 25 If you require any further advice please contact your local water authority . Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be ob ...
-
Zanussi ZWF 1241 W - page 26
© Electrolux plc 2005 From the Electr olux Group. The world’ s No. 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sol ...
Do you have a question concerning Zanussi ZWF 1241 W?
Use the form below
If you did not solve your problem by using a manual Zanussi ZWF 1241 W, ask a question using the form below. If a user had a similar problem with Zanussi ZWF 1241 W it is likely that he will want to share the way to solve it.