English dropdown-ico

Manual AMX MXT-1000-NC

42 pages Not applicable
Download

Go to site of 42

Summary
  • AMX MXT-1000-NC - page 1

    Operation/Reference Guide Touch Panels MXT/D-1000 10.1" ModeroX Series® Tabletop Touch Panel 10.1" Modero X Series® Wa ll/Flush Mount Touch Panel Last Updated: 10/24/201 2 ...

  • AMX MXT-1000-NC - page 2

    AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity . AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) ye a ...

  • AMX MXT-1000-NC - page 3

    AMX Software License and Warranty Agreement • LICENSE GRANT . AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, no t sold. This license does not grant Licensee the right to create derivative wor ks of t he AMX Software. The AMX Software consists of general ...

  • AMX MXT-1000-NC - page 4

    ...

  • AMX MXT-1000-NC - page 5

    Table of Contents i MXD/T-1000 10.1" Modero® X Series Touch Panels Table of Contents Modero X Series® Touch Panels ........................................................................ 1 Overview .............................. ......................... ................... .................... .................... 1 Features .............. ...

  • AMX MXT-1000-NC - page 6

    ii MXD/T-1000 10.1" Modero® X Series Touch Panels Table of Contents Upgrading Firmware ........................... ............................................... ............... 25 Overview ........... .................... ......................... ................... .................... ................. 25 Upgrading Firmware via USB Flash ...

  • AMX MXT-1000-NC - page 7

    Modero X Series® Touch Panels 1 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Modero X Series® Touch Panels Overview See more and do more with the most ele gant interf ace designed sp ecific ally for dedicated room control. The Modero X Series ® T ouch Panels provide se veral industry f irsts, including a beautiful, panoramic capacitiv e ...

  • AMX MXT-1000-NC - page 8

    Modero X Series® Touch Panels 2 MXD/T-1000 10.1" Modero X Series® Touch Panels MXT-1000 The MXT -1000 ( FG5968-03 ) (FIG. 1) is ideal for boardrooms, conf erence rooms, or auditoriums where a panoramic contro l surface is needed to pro vide access to multiple funct ions simultaneously while remaining elegantly unobtrusi ve. In residences, it ...

  • AMX MXT-1000-NC - page 9

    Modero X Series® Touch Panels 3 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels MXT-1000 Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 3 Power Consumption: • Full-On: 8W maximum • Standby: 3.2 W • Shutdown: 1 W F ront Panel Components: NFC T ransceiver: Antenna and transceiver for N ear Field Communica ti ...

  • AMX MXT-1000-NC - page 10

    Modero X Series® Touch Panels 4 MXD/T-1000 10.1" Modero X Series® Touch Panels Connector Locations W ith the unit facing you, the tw o USB ports for peripherals are located on the rear right corner of the device (FIG. 3). The RJ45 connector for PoE, as well as a 5-pin Micro-USB port, is also located on the back of the de vice. In addition to ...

  • AMX MXT-1000-NC - page 11

    Modero X Series® Touch Panels 5 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Memory The MXT -1000 comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded. A maximum of 2.4 GB is a vailable to the u ser for projects. Basic Operation The MXT -1000 is operated using its inte gral touchscreen, as well as the Sle ...

  • AMX MXT-1000-NC - page 12

    Modero X Series® Touch Panels 6 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD-1000 The MXD-1000 10.1” Modero X Series Panoramic W all T ouch Panels ( P ortrait W all Mount: FG5968-07 ; Landscape W all Mount: FG5968-13 ) are ideal for boar drooms, conferen ce rooms, or auditoriums where a panoramic contro l surface is needed to pro vid ...

  • AMX MXT-1000-NC - page 13

    Modero X Series® Touch Panels 7 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels MXD-1000 Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 3 Power Consumption: • Full-On: 8W maximum • St andby: 3.2 W • Shutdown: 1 W F ront Panel Components: NFC T ransceiver: Antenna and transceiver for N ear Field Communica t ...

  • AMX MXT-1000-NC - page 14

    Modero X Series® Touch Panels 8 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD-1000 Specific ations (Cont.) Communications (Cont.): Bluetooth: HID Profile v1.1, Keyboard/ Mouse Support, requires MXA-BT Bluetooth Adaptor . Video: S treaming/File Formats: MPEG-TS for MPEG2; HTTP for MJPEG Video Conferencing (Landscape Only): External appli ...

  • AMX MXT-1000-NC - page 15

    Modero X Series® Touch Panels 9 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Memory The MXD-1000 comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded. A maximum of 2.4 GB is a vailable to the u ser for projects. Basic Operation The MXD-1000 is operated using its inte gral touchscreen, as well as the Sleep ...

  • AMX MXT-1000-NC - page 16

    Modero X Series® Touch Panels 10 MXD/T-1000 10.1" Modero X Series® Touch Panels MXD/T-1000 Features Picture View By connecting a USB driv e via one of the de vice’ s USB ports (FIG. 3), Picture V iew allo ws the MXT -1000 to access JPEG images on that dri ve an d display them on the touchscreen (FIG. 7). I ndividual images may be accessed ...

  • AMX MXT-1000-NC - page 17

    Modero X Series® Touch Panels 11 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 3. On the leftmost amber button, select between Rand (images display at random) and A-Z (images display in alphabetical order based on the name of the file ). 4. The four grey b uttons allo w scrolling thr ough sav ed images and the rate of display:  The P ...

  • AMX MXT-1000-NC - page 18

    Modero X Series® Touch Panels 12 MXD/T-1000 10.1" Modero X Series® Touch Panels Picture View Send Co mmand The ^PIC Send Command stops either mode of Picture V iew , or starts Pre vie w Mode. For more information, please refer to the Moder o X Series Pro gramming Guide , available at www .amx.com . Configuration The MXT -1000 and MXD-1000 ar ...

  • AMX MXT-1000-NC - page 19

    Installation 13 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Installation MXT-1000 Installation Any USB peripherals (mouse, ke yboard, et c.) may be connected to one of th e two USB ports on the rear of the dev ice (FIG. 9). Updates to the de vice’ s firmwa re are also made via the USB ports. The 5-pin Micro-USB port is used exclusi vely ...

  • AMX MXT-1000-NC - page 20

    Installation 14 MXD/T-1000 10.1" Modero X Series® Touch Panels T o disconnect and reconnect the MXT -1000’ s Ethernet cable to allo w use of a hole smaller than 1.00” in diameter: 1. On a soft surface, turn the MXT - 1000 face-do wn to access the bottom of the device. 2. Remov e the clamp holding the Ethernet cable (F IG. 11) until the Et ...

  • AMX MXT-1000-NC - page 21

    Installation 15 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Installing the MX D-1000 into a wall The MXD-1000 comes with a clear plastic backbox ( desi gned to attach the panel to most standard wall materials. This backbox has four locking tabs (two on top an d two on bottom) to help lock the backbox to the wall. These locking tabs are on ...

  • AMX MXT-1000-NC - page 22

    Installation 16 MXD/T-1000 10.1" Modero X Series® Touch Panels T o install the back box: 1. Prepare the area by removing any scre ws or nails fro m the drywall before begi nning the cutout process. 2. For best resu lts, use the MXD-1000 Installation T emplate ( 68-5968-03 ) to ensure proper placement (FIG. 15). The templa te is marked on one ...

  • AMX MXT-1000-NC - page 23

    Installation 17 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 4. Thread the incoming Et hernet and Micro-USB wiri ng (if Micro-USB access is desired) from their terminal locations through the surface opening (FIG. 16 ). Leave enough slack in the wiring to accommodate any r e-pos itioning of the panel. 5. Remov e the back box knockouts (FIG. ...

  • AMX MXT-1000-NC - page 24

    Installation 18 MXD/T-1000 10.1" Modero X Series® Touch Panels 11 . T est the incoming wiring by attaching the panel conne ctions to their terminal locations and applying power . V erify that the panel is rece iv ing po wer a nd functioning properly to pre vent r epetition of the installation. 12. Latch the panel onto the top hooks on the bac ...

  • AMX MXT-1000-NC - page 25

    Installation 19 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 13. Reconnect the terminal Ethe rnet and USB to their respecti ve loca tions on either the Ethernet port or NetLinx Master . Uninstalling the MXD-1000 The MXD-1000 is held in place to the back box via latch hooks and clips on the back box (FIG. 19), securing it to the mounting su ...

  • AMX MXT-1000-NC - page 26

    Installation 20 MXD/T-1000 10.1" Modero X Series® Touch Panels 2. W ith a stout, strong point (a push pi n or straightened paperclip, for e xample), carefully press into the access holes in either end of the molding (FI G. 21) until the snap is disconne cted. T o facilitate the disconnection, grasp the botto m of the panel (Landscape) or righ ...

  • AMX MXT-1000-NC - page 27

    Installation 21 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels ...

  • AMX MXT-1000-NC - page 28

    Installation 22 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXT-1000-NC - page 29

    Configuration and Programming 23 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Configuration and Programming Modero X Series Programming Guide Information on Settings pages, panel configur ation, a nd programming is included in the Moder o X Series Pr ogramming Guide , av ailable at www .amx.com . Programming the MXT -1 000 and MXD-1 000 re ...

  • AMX MXT-1000-NC - page 30

    Configuration and Programming 24 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXT-1000-NC - page 31

    Upgrading Firmware 25 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Upgrading Firmware Overview The latest f irmware (*.kit) f ile for eac h panel is a v ailable to do wnload from www .amx.com. T o download firmw are files, go to the catalog page for your panel t ype, and click the link under " Fi rmware Files " on the right side ...

  • AMX MXT-1000-NC - page 32

    Upgrading Firmware 26 MXD/T-1000 10.1" Modero X Series® Touch Panels 4. Eject or unmount the flash dri ve from the PC. Transfer the Fi rmware File From th e Flash Drive to the Tou ch Panel 1. Connect the USB Flash Driv e to one of the USB T ype A ports on th e panel. 2. Go to the Install Firmwar e setup page ( Configur ation->Admin->Ins ...

  • AMX MXT-1000-NC - page 33

    Upgrading Firmware 27 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Upgrading from Previous Firmware The MXT -1000 and MXD-1000 allow the optio n to rev ert the de vice to the pre vious f irmware run before an upgrade. T o upgrade the device from pre viously loaded firmw a re: 1. From the Settings page, select the Configur ation page. 2. Fr ...

  • AMX MXT-1000-NC - page 34

    Upgrading Firmware 28 MXD/T-1000 10.1" Modero X Series® Touch Panels Upgrading Firmware Via NetLinx Studio The MXT -1000 and MXD-1000 use an Ethe rnet connection for programming, firmw are updates, and touch panel file transfer via NetLinx Stu dio. If you ha ve access to the panel’ s netw ork, you may transfer f iles directly to the panel t ...

  • AMX MXT-1000-NC - page 35

    Upgrading Firmware 29 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 5. Click the Edit Settings b utton on the Communications Settings dialog to open the V irtual NetLinx Master Settings dialog (FIG. 28). 6. W ithin this dialog, enter the Master System number . The default is 1 . 7. In the A vailable Connections section, click on the IP addr ...

  • AMX MXT-1000-NC - page 36

    Upgrading Firmware 30 MXD/T-1000 10.1" Modero X Series® Touch Panels Viewing devices on the Virtual System 1. After the Communication V erification dialog windo w ve rifies acti ve communication between the V irtual Master and the panel, click the OnLine T ree tab in the W orkspace windo w (FIG. 29) to view the de vices on the V irtual System ...

  • AMX MXT-1000-NC - page 37

    Upgrading Firmware 31 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels 4. Select the appropri ate Kit f ile from withi n the Br owse for F older window (FIG. 31). 5. Select the panel ’ s Kit file from the Files sectio n. 6. Enter the Device v al ue associated with the panel and the System number associat ed with the Master ( listed in the On ...

  • AMX MXT-1000-NC - page 38

    Upgrading Firmware 32 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXT-1000-NC - page 39

    Appendix: Troubleshooting 33 MXD/T-1000 10.1" Modero X Ser ies® Touch Panels Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero X touch panel. Panel Doesn’t Respond To Touche s Symptom: The de vice either does not respond to to ...

  • AMX MXT-1000-NC - page 40

    Appendix: Troubleshooting 34 MXD/T-1000 10.1" Modero X Series® Touch Panels ...

  • AMX MXT-1000-NC - page 41

    Appendix - Troubleshooting 35 MXD/T-1000 10.1" Modero X Series ® Touch Panels ...

  • AMX MXT-1000-NC - page 42

    10/2012 © 2012 AMX. All rights reserved. AMX and the AMX logo are register ed trademarks of AMX. AMX rese rves the right to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support ? ...

Manufacturer AMX Category Monitor

Documents that we receive from a manufacturer of a AMX MXT-1000-NC can be divided into several groups. They are, among others:
- AMX technical drawings
- MXT-1000-NC manuals
- AMX product data sheets
- information booklets
- or energy labels AMX MXT-1000-NC
All of them are important, but the most important information from the point of view of use of the device are in the user manual AMX MXT-1000-NC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AMX MXT-1000-NC, service manual, brief instructions and user manuals AMX MXT-1000-NC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AMX MXT-1000-NC.

Similar manuals

A complete manual for the device AMX MXT-1000-NC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AMX MXT-1000-NC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AMX MXT-1000-NC.

A complete AMX manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AMX MXT-1000-NC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AMX MXT-1000-NC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AMX MXT-1000-NC, that we can find in the current document
3. Tips how to use the basic functions of the device AMX MXT-1000-NC - which should help us in our first steps of using AMX MXT-1000-NC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AMX MXT-1000-NC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AMX MXT-1000-NC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AMX MXT-1000-NC?

Use the form below

If you did not solve your problem by using a manual AMX MXT-1000-NC, ask a question using the form below. If a user had a similar problem with AMX MXT-1000-NC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)