Manual AEG F88709W0P

20 pages Not applicable
Download

Go to site of 20

Summary
  • AEG F88709W0P - page 1

    EN User Manual Dishwasher FAVORIT 88709M0P FAVORIT 88709W0P ...

  • AEG F88709W0P - page 2

    CONTENTS 1. SAFETY INFORMATION................................................................................................. 3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION............................................................................. ...

  • AEG F88709W0P - page 3

    1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 General Safety • This appliance is intended to be used in ...

  • AEG F88709W0P - page 4

    1.2 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. ? ...

  • AEG F88709W0P - page 5

    WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. ? ...

  • AEG F88709W0P - page 6

    5 Rating plate 6 Salt container 7 Air vent 8 Rinse aid dispenser 9 Detergent dispenser 10 Lower basket 11 Upper basket 12 Cutlery drawer 4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program touchpad 3 Programme indicators 4 Display 5 Delay touchpad 6 Option touchpad 7 Indicators 8 Start touchpad 4.1 Indicators Indicator Description Washing ph ...

  • AEG F88709W0P - page 7

    Indicator Description TimeSaver indicator. Delay indicator. ExtraHygiene indicator. 5. PROGRAMMES Programme Degree of soil Type of load Programme phases Options 1) • Normal soil • Crockery and cut- lery • Prewash • Wash 50 °C • Rinses • Dry • ExtraHygiene • TimeSaver • Multitab 2) • All • Crockery, cutlery, pots and pans • ...

  • AEG F88709W0P - page 8

    Programme Degree of soil Type of load Programme phases Options 6) • Normal soil • Crockery and cut- lery • Prewash • Wash 50 °C • Rinses • Dry • Multitab 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes ...

  • AEG F88709W0P - page 9

    6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. In user mode, the following settings can be changed: • The level of the water softener according to the water hardness. • The deactivation of the rinse aid dispenser when you want ...

  • AEG F88709W0P - page 10

    How to set the water softener level The appliance must be in programme selection mode. 1. To enter the user mode, press and hold simultaneously Delay and Option until the indicators , and start to flash and the display is blank. 2. Press Program . • The indicators and go off. • The indicator continues to flash. • The display shows the current ...

  • AEG F88709W0P - page 11

    7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of ...

  • AEG F88709W0P - page 12

    inside the appliance. Do not use detergent and do not load the baskets. When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. The washing phase starts only after this procedure is completed. The procedure will be repeated periodically. 8.1 The salt ...

  • AEG F88709W0P - page 13

    9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in user mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. If you use multi- tablets, activate the optio ...

  • AEG F88709W0P - page 14

    the running phase comes on. The delay indicator goes off. Opening the door while the appliance operates If you open the door while a programme is running, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countdown operates When you cancel the delay start you h ...

  • AEG F88709W0P - page 15

    • Multi-tablets are usually suitable in areas with a water hardness up to 21 °dH. In areas exceeding this limit, rinse aid and salt must be used in addition to the multi-tablets. However, in areas with hard and very hard water we recommend to use solo-detergent (powder, gel, tablets without additional functions), rinse aid and salt separately fo ...

  • AEG F88709W0P - page 16

    11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spay arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made of 3 parts. C B A 1. Turn the filter ( B ) counter ...

  • AEG F88709W0P - page 17

    7. Reassemble the filters ( B ) and ( C ). 8. Put back the filter ( B ) in the flat filter ( A ). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove rem ...

  • AEG F88709W0P - page 18

    Problem and alarm code Possible solution The programme does not start. • Make sure that the appliance door is closed. • Press Start . • If the delay start is set, cancel the setting or wait for the end of the countdown. • The appliance has started the procedure to recharge the resin inside the water softener. The duration of the procedure i ...

  • AEG F88709W0P - page 19

    13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 850 / 610 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 15 Power consumption Left-on mode (W) 0.99 Power consumption Off ...

  • AEG F88709W0P - page 20

    www.aeg.com/shop 117904880-B-152014 ...

Manufacturer AEG Category Dishwasher

Documents that we receive from a manufacturer of a AEG F88709W0P can be divided into several groups. They are, among others:
- AEG technical drawings
- F88709W0P manuals
- AEG product data sheets
- information booklets
- or energy labels AEG F88709W0P
All of them are important, but the most important information from the point of view of use of the device are in the user manual AEG F88709W0P.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AEG F88709W0P, service manual, brief instructions and user manuals AEG F88709W0P. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AEG F88709W0P.

Similar manuals

A complete manual for the device AEG F88709W0P, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AEG F88709W0P by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AEG F88709W0P.

A complete AEG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AEG F88709W0P - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AEG F88709W0P, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AEG F88709W0P, that we can find in the current document
3. Tips how to use the basic functions of the device AEG F88709W0P - which should help us in our first steps of using AEG F88709W0P
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AEG F88709W0P
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AEG F88709W0P in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AEG F88709W0P?

Use the form below

If you did not solve your problem by using a manual AEG F88709W0P, ask a question using the form below. If a user had a similar problem with AEG F88709W0P it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)