English dropdown-ico

Manual Whirlwind MD-1

4 pages 0.06 mb
Download

Go to site of 4

Summary
  • Whirlwind MD-1 - page 1

    www.whirlwindusa.com MD - 1 MIC TO LINE DRIVER / HEADPHONE MONITOR The Whirlwind MD - 1 is the culmination of many years of joint product development between our engi neers and suggestions from professionals such as you. This compact portable unit combines a high quality microphone preamp - line driver with a headphone amplifier designed to monitor ...

  • Whirlwind MD-1 - page 2

    DRIVER position, the output male XLR connector receives the amplified balanced output of the MD - 1 circuitry. With the switch in LOOP position the output XL R is connected directly to the female input XLR. This allows the MD - 1 to monitor a signal looping through the unit without altering it. In the LOOP mode the MIC/LINE switch and GAIN control ...

  • Whirlwind MD-1 - page 3

    GAIN control adjusts the amount of level provided at the rear mounted output male XLR jack. Nominal gain is 40dB in mic mode, with the control set at #6. Headphone jack accepts 30 Ω to 600 Ω headphones for monitoring signa ls applied to the headphone amplifier. PWR button turns the unit on and off. BATT OK LED illuminates when the unit is turne ...

  • Whirlwind MD-1 - page 4

    Maximum Output Level +12 dBm into a 2k Ω load +24 dBm into a 10 k Ω load +36 dBm into 100k Ω load Output Imped ance 600 Ω Rise Time 7uS C.M.R. (Common Mode >80dBm at 60Hz Rejection) of input >60dBm at 60Hz Line THD+ n (Total Harmonic Distortion + Noise) Using <.1% 100Hz to 20kHz 200 ohm Input impedance .4% 20Hz mic mode 2 k ohm out ...

Manufacturer Whirlwind Category Headphones

Documents that we receive from a manufacturer of a Whirlwind MD-1 can be divided into several groups. They are, among others:
- Whirlwind technical drawings
- MD-1 manuals
- Whirlwind product data sheets
- information booklets
- or energy labels Whirlwind MD-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Whirlwind MD-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Whirlwind MD-1, service manual, brief instructions and user manuals Whirlwind MD-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Whirlwind MD-1.

Similar manuals

A complete manual for the device Whirlwind MD-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Whirlwind MD-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Whirlwind MD-1.

A complete Whirlwind manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Whirlwind MD-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Whirlwind MD-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Whirlwind MD-1, that we can find in the current document
3. Tips how to use the basic functions of the device Whirlwind MD-1 - which should help us in our first steps of using Whirlwind MD-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Whirlwind MD-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Whirlwind MD-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Whirlwind MD-1?

Use the form below

If you did not solve your problem by using a manual Whirlwind MD-1, ask a question using the form below. If a user had a similar problem with Whirlwind MD-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)