English dropdown-ico

Manual Whirlpool 20TM-L4

19 pages Not applicable
Download

Go to site of 19

Summary
  • Whirlpool 20TM-L4 - page 1

    3 INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE SAFEGU ARDING THE ENVIRONMENT PRECA UTIONS AND GENERAL RECOMMEND A TIONS IF THE APPLIANCE IS NOT GOING TO BE USED MAINTENANCE AND CLEANING STORING, FREEZING AND THA WING FOOD DESCRIPTION OF THE APPLIANCE “MUL TIFL OW ” AIR DISTRIBUTION GUIDE TO THE INSIDE P ARTS USING THE APPLIANCE USING THE ICE ...

  • Whirlpool 20TM-L4 - page 2

    4 BEFORE USING THE APPLIANCE Y our new appliance is designed exclusively for domestic use. After unpacking the appliance, make sure it is not damaged and that the door closes properly . Any damage must be reported to the dealer within 24 hours of delivery of the appliance. W ait at least two hours before switching the appliance on, to ensure that t ...

  • Whirlpool 20TM-L4 - page 3

    5 INST ALLA TION • The appliance must be handled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sure the appliance does not damage the power cable. • Make sure the appliance is not near a heat source. • T o guarantee adequate ventilation, le ...

  • Whirlpool 20TM-L4 - page 4

    6 In case of power failures of up to 24 hours Keep the doors of the appliance closed. In this way the stored food will stay cold as long as possible. For further information see chapter “Using the appliance”, section “Black-out alarm”. If the appliance is not going to be used - Disconnect the appliance from the power supply . - Remove all t ...

  • Whirlpool 20TM-L4 - page 5

    7 INTRODUCTION W rap food so that no water , moisture or condensate can enter; this will prevent odours or aromas going from one part to another in the refrigerator , ensuring better preservation of frozen foods. Use plastic containers with hermetic lids, aluminium trays, aluminium foil, plastic film and waterproof plastic wraps. NOTE: Never place ...

  • Whirlpool 20TM-L4 - page 6

    8 DESCRIPTION OF THE APPLIANCE                      REFRIGERA TOR COMP ARTMENT A. Inside light B. Inside light C. Adjustable shelf D. Shelf - drawer lid E Crisper F . Crisper adjustment G. Meat / vegetable drawer H. Meat / vegetable drawer adjustment I. Dairy products compartment J. ...

  • Whirlpool 20TM-L4 - page 7

    9 Removing and repositioning the refrigerator compartment and freezer shelves. The shelves can be positioned as required. The glass shelves are strong enough to hold bottles, milk cartons and heavy food, however , take care not to bang products on the shelves. T o remove the shelves: pull the shelf out as far as it goes, then lift and remove it. Re ...

  • Whirlpool 20TM-L4 - page 8

    10 FIRST USE Connect the appliance to the water system and power supply (refer to the Installation manual). When connecting the appliance to the power supply , the display will show the temperatures preset by the manufacturer . Note: Reaching the preset temperatures requires a variable amount of time. This time depends on several factors (times the ...

  • Whirlpool 20TM-L4 - page 9

    11 11 GUIDE TO SELECTING FUNCTIONS Menu This button is used to select the different options shown in the control panel. Each time the button is pressed, a different option is highlighted. OK The OK button is used to confirm the selected function and to deactivate the acoustic signal. Stand-by This function turns off the refrigerator and freezer com ...

  • Whirlpool 20TM-L4 - page 10

    12 ALARMS The alarm icon is connected with the acoustic signal. Important: T o disable the acoustic signal, press the OK button. Black-out alarm The alarm black-out activates when a prolonged interruption of the power supply has caused an increase in temperature in the freezer compartment. The freezer display will flash, showing the maximum tempera ...

  • Whirlpool 20TM-L4 - page 11

    13 OPERA TION SYMBOLS 6th Sense * Function The icon on indicates that the appliances is in the process of reaching the optimum preservation conditions This function will activate automatically when: • A particularly high quantity of food to be cooled and/or frozen has been placed inside the appliance. • The refrigerator and/or freezer door has ...

  • Whirlpool 20TM-L4 - page 12

    14 OPTIONAL FUNCTIONS P arty mode This function is activated by pressing the menu button until the party mode symbol appears. With the symbol flashing, press OK to confirm your selection. This function enables to use the freezer compartment to cool drinks. When the function is selected, the icon is animated. 30 minutes after activation (the time ne ...

  • Whirlpool 20TM-L4 - page 13

    15 First use When the ice and water dispenser is used for the first time, the first ice cubes and water coming out of the dispenser may have an unpleasant taste and should therefore be discarded. Ice Mode The function is activated when the symbol is lit. Press the ice mode button to select the symbol corresponding to the type of ice required (cubes ...

  • Whirlpool 20TM-L4 - page 14

    16 After switching on the refrigerator , it usually takes overnight for the first ice cubes to form. When selecting crushed ice, the cubes are crushed just before being dispensed, therefore the crushed ice may come out with a slight delay . Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed ice to i ...

  • Whirlpool 20TM-L4 - page 15

    17 1. Locate the water filter cartridge cap below the freezer compartment door . Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille. Note: Since there is water in the cartridge, some spilling may occur . 2. Remove the cartridge cap by sliding it off the end of the old cartridge. ...

  • Whirlpool 20TM-L4 - page 16

    18 Before contacting the After-sales Service... Operation problems are often due to minor causes that can be found and fixed without using any tools. Noises from the appliance are normal, since the fans and compressors for controlling its operation switch on and off automatically . Some noises can be reduced by: • levelling the appliance and inst ...

  • Whirlpool 20TM-L4 - page 17

    19 The appliance does not work: • Is the power cable plugged into a socket powered with the right voltage? • Have you checked the protection devices and fuses of your home’s electrical system? The motor seems to run too much: • Is the condenser free of dust and fluff? • Are the doors properly closed? • Are the door seals intact? • On ...

  • Whirlpool 20TM-L4 - page 18

    20 If the ice dispenser stops working: • Are the ice cubes stuck because the ice dispenser has not been used for some time? Shake the ice bucket to separate the cubes and increase the holding capacity . It is advisable to throw away the old ice cubes and make new ice. • Has the ice dispenser lever been pressed for too long? W ait about 3 minute ...

  • Whirlpool 20TM-L4 - page 19

    21 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover ( A ) and fuse ( B ). 2. Fit replacement 13A fuse into fuse cover . 3. Ref ...

Manufacturer Whirlpool Category Refrigerator

Documents that we receive from a manufacturer of a Whirlpool 20TM-L4 can be divided into several groups. They are, among others:
- Whirlpool technical drawings
- 20TM-L4 manuals
- Whirlpool product data sheets
- information booklets
- or energy labels Whirlpool 20TM-L4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Whirlpool 20TM-L4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Whirlpool 20TM-L4, service manual, brief instructions and user manuals Whirlpool 20TM-L4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Whirlpool 20TM-L4.

Similar manuals

A complete manual for the device Whirlpool 20TM-L4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Whirlpool 20TM-L4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Whirlpool 20TM-L4.

A complete Whirlpool manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Whirlpool 20TM-L4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Whirlpool 20TM-L4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Whirlpool 20TM-L4, that we can find in the current document
3. Tips how to use the basic functions of the device Whirlpool 20TM-L4 - which should help us in our first steps of using Whirlpool 20TM-L4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Whirlpool 20TM-L4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Whirlpool 20TM-L4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Whirlpool 20TM-L4?

Use the form below

If you did not solve your problem by using a manual Whirlpool 20TM-L4, ask a question using the form below. If a user had a similar problem with Whirlpool 20TM-L4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)