English dropdown-ico

Manual VDO Dayton CD 2200

18 pages Not applicable
Download

Go to site of 18

Summary
  • VDO Dayton CD 2200 - page 1

    2 * Depending on version • Blue lead A5 (Electronic/Motor Aerial) : This radio can provide a 12V signal for the control of an automatic motor aerial or the supply of an electronic aerial by connection. Do not use this connection for the supply lead of the aerial motor! • Orange lead A6 (Pilot light) : Connect to the dashboard illumination wirin ...

  • VDO Dayton CD 2200 - page 2

    3 * Depending on version OTHERS CONNECTIONS (fig.2) Line-output * • Y ou can connect a pow er amplifier (with 2 additional loudspeaker) to this set with the RCA cable. – Connect Red socket to Right channel and white socket to Left channel. – Connect Blue wire to Amplifier Remote on/off. Wired Remote Control Y ou can connect a wired remote con ...

  • VDO Dayton CD 2200 - page 3

    4 * Depending on version LEGEND Briefly press the key . Press and hold the ke y . Press the key until you hear a confirmation beep. T urn the rotar y knob. Useful tips ENVIRONMENT This booklet is printed on low-chlorine recyclable paper that can be used for recycling. CHECK BEFORE REQUESTING SER VICE There may be times when you suspect that your ca ...

  • VDO Dayton CD 2200 - page 4

    5 * Depending on version SECURITY For theft protection this set is provided with the following security features : DET ACHABLE FRONT T ake the detachab le front with you when leaving the car . K eep it in its protective cov er . Alwa ys replace the detachable front before starting to drive. REMO VING THE FRONT • Open the front (1). • Push the b ...

  • VDO Dayton CD 2200 - page 5

    6 * Depending on version INITIAL SETTINGS It is possible to modify many of the set's initial settings according to your preferences. • Enter the Initial Settings menu. • Select one of the option you want to modify • Alter the Choice. • Leave the Initial Settings menu : The set automatically leaves the Initialisation mode about 1 minute ...

  • VDO Dayton CD 2200 - page 6

    7 * Depending on version SCAN [5, 10, 15] Select the scan time (station or track). TIME * [24H, 12H] Select desired clock f or mat. (See 'SETTING THE CLOCK'). CLK * [MAN, A UTO] Select 'A UTO' to activ ate RDS clock or 'MAN' to set cloc k manually . (See 'SETTING THE CLOCK'). T A [0, +1, +2, +3, +4] V olume l ...

  • VDO Dayton CD 2200 - page 7

    8 * Depending on version CLOCK * This set has a clock that can either be manually set by you or can be automatically updated via the RDS signal. SETTING THE CLOCK (MANU ALL Y) • Enter the Initial Settings menu. • Select option 'CLK'. • Alter the Choice to 'MAN'. , – Display shows e.g. '00:00' (24 hour format) o ...

  • VDO Dayton CD 2200 - page 8

    9 * Depending on version STORE A SPEED Ensure in 'INITIAL SETTINGS' option 'SPD' is set either to 'KM/H' or 'MPH'. 1. Drive at the desired speed. 2. T o record the speed e.g. 80KM/H (50MPH) : Display briefly shows '80 KM/H' and flag ' ' turn on. When the recorded speed is exceeded, display ...

  • VDO Dayton CD 2200 - page 9

    10 * Depending on version A UDIO ADJUSTMENT ON/OFF • Switch the set on or off : Y ou can use the set ev en when the car ignition is switched off . See 'INST ALLA TION'. V OLUME Please make sure you can still hear the traffic (horns, sirens........) • Adjust the volume : SOUND • Select one of the pre-defined sound styles: – BASS-TR ...

  • VDO Dayton CD 2200 - page 10

    11 * Depending on version RADIO W A VEBAND • Select the desired waveband : The display shows : FM1 or FM2, MW1, or MW2, or L W (when Choice is 'EUROPE' under 'RADIO' option; see INITIAL SETTINGS). FM1, FM2, AM1, or AM2 (when Choice is 'AMERICA' or 'ASIA' under 'RADIO' option; see INITIAL SETTINGS) ...

  • VDO Dayton CD 2200 - page 11

    12 * Depending on version MANU AL TUNING (if y ou know the frequency of the required station) • T o s witch to manual tuning : • T une to the desired frequency : After about 1 minute with a beep the radio automatically switches back to search tuning MANU ALL Y STORING ST A TIONS IN A PRESET Y ou can manually store 20 FM stations (on the FM1 ban ...

  • VDO Dayton CD 2200 - page 12

    13 * Depending on version RADIO D A T A SYSTEM (RDS) ON FM Many FM stations broadcast RDS information. This set uses the RDS information to offer you many advantages including : DISPLA Y OF ST A TION-NAME The set displays the name of the station instead of its frequency . Useful tips Display shows frequency (not station name). • Set is tuned to n ...

  • VDO Dayton CD 2200 - page 13

    14 * Depending on version Useful tips Display sho ws 'NO T A', and set beeps at inter vals. • The tuned station becomes too weak to enable the reception of T raffic Announcements. Use search tuning to find another station. • If the T A mode is switched on, search tuning only selects stations which enable the reception of T raffic Anno ...

  • VDO Dayton CD 2200 - page 14

    15 * Depending on version CASSETTE PLA YER (CR2100/ CR2200) PLA YBA CK 1 Open the front. 2 Slide the cassette, with the open side to the right into the cassette opening. 3 Close the front. The display briefly shows 'T APE CR' if a metal or chromium cassette is inserted. Playback starts. • If a cassette is already inserted : Select casse ...

  • VDO Dayton CD 2200 - page 15

    16 * Depending on version PREVIOUS / NEXT TRACK Select the desired track. • Previous tracks : • Next tracks : – Playback resumes with the chosen track. F AST B A CKW ARD / FORW ARD T o quickly mov e through the disc • Backwards : • Forward : – Normal playback resumes when you release the ke y . SCAN TRAC K The scan function enables you ...

  • VDO Dayton CD 2200 - page 16

    17 * Depending on version Useful tips Display shows 'CD ERROR' and set beeps. • Check that the discs have been inserted the correct way and that you have not inserted a damaged or dirty disc. Distorted sound during playback. • Player unable to read disc. CD damaged or dirty . Display shows 'NO CD'. • Check that the CD mech ...

  • VDO Dayton CD 2200 - page 17

    18 * Depending on version A wired remote control can be connected to this set. See your dealer f or more information. The remote control allows you to carry out some of the main functions of the set, without the need to take y our ey es off the road while driving. This increases your saf ety . A UDIO • V olume : Adjust the volume b y tur ning the ...

  • VDO Dayton CD 2200 - page 18

    19 * Depending on version Choose what the display shows : In Radio mode : Station name. Programme type (If available and (if available) RDS is active). Frequency Clock * T emperature (if sensor connected and activated) In Cassette mode (CR2100 / CR2200) : Depending on Clock * T emperature (if current operation. sensor connected and activated) In CD ...

Manufacturer VDO Dayton Category Car Radio

Documents that we receive from a manufacturer of a VDO Dayton CD 2200 can be divided into several groups. They are, among others:
- VDO Dayton technical drawings
- CD 2200 manuals
- VDO Dayton product data sheets
- information booklets
- or energy labels VDO Dayton CD 2200
All of them are important, but the most important information from the point of view of use of the device are in the user manual VDO Dayton CD 2200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals VDO Dayton CD 2200, service manual, brief instructions and user manuals VDO Dayton CD 2200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product VDO Dayton CD 2200.

Similar manuals

A complete manual for the device VDO Dayton CD 2200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use VDO Dayton CD 2200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of VDO Dayton CD 2200.

A complete VDO Dayton manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual VDO Dayton CD 2200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the VDO Dayton CD 2200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the VDO Dayton CD 2200, that we can find in the current document
3. Tips how to use the basic functions of the device VDO Dayton CD 2200 - which should help us in our first steps of using VDO Dayton CD 2200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with VDO Dayton CD 2200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of VDO Dayton CD 2200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning VDO Dayton CD 2200?

Use the form below

If you did not solve your problem by using a manual VDO Dayton CD 2200, ask a question using the form below. If a user had a similar problem with VDO Dayton CD 2200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)