English dropdown-ico

Manual Patton electronic 1004

10 pages 0.07 mb
Download

Go to site of 10

Summary
  • Patton electronic 1004 - page 1

    USER MANU AL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 Part# 07M1004-C Doc# 04701 1UC Revised 8/10/95 MODEL 1004 and 1004S High Speed, Multipoint Short Range Modem ...

  • Patton electronic 1004 - page 2

    1.0 WARRANTY INFORMA TION Patton Electronics warrants all Model 1004 components to be free from defects, and will—at our option—repair or replace the prod- uct should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1004 - page 3

    3.0 CONFIGURA TION The Model 1004 is configured using six PC board mounted switch- es. Figure 1 shows the switch locations, along with the location of the terminal blocks and optional surge protectors: 3.1 SETTING THE DCE/DTE SWITCH For your convenience, the Model 1004 has an externally accessi- ble DCE/DTE switch (Figure 2). If the device connecte ...

  • Patton electronic 1004 - page 4

    3.2.1 SWITCH SETTINGS All possible settings for the Model 1004’s configuration switches are presented in the summary table below . If you have additional questions, contact T echnical Support at (301) 975-1000. SW 1-1: RTS/CTS Delay The setting for Switch SW1-1 determines the amount of delay between the time the Model 1004 “sees” RTS and when ...

  • Patton electronic 1004 - page 5

    4.0 INST ALLA TION Once the Model 1004 is properly configured, it is ready to connect to your system. This section tells you how to properly connect the Model 1004 to the twisted pair and RS-232 interfaces, and how to operate the Model 1004. 4.1 TWISTED P AIR CONNECTION The Model 1004 supports data-only communication between two RS-232 devices at d ...

  • Patton electronic 1004 - page 6

    8. When you finish connecting the wires to the terminal block, the assembly should resemble the diagram below: 9. Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightly . Slide the assem- bly so that it is about 2 inches from the terminal posts and press together firmly . If your cable ...

  • Patton electronic 1004 - page 7

    RJ-45 Cable (4-Wire) SIGNAL PIN# PIN# SIGNAL GND † 2 -----------------------7 GND † RCV- 3 -----------------------5 XMT- XMT+ 4 -----------------------6 RCV+ XMT- 5 -----------------------3 RCV- RCV+ 6 -----------------------4 XMT+ GND † 7 -----------------------2 GND † RJ-1 1 Cable (2-Wire) SIGNAL PIN# PIN# SIGNAL XMT+ 3 ------------------ ...

  • Patton electronic 1004 - page 8

    Figure 4 shows how to wire the two-pair cables properly for a Model 1004 star topology . Note that the ground connection is not needed. 4.2.2 DAISY CHAIN TOPOLOGY Using a daisy chain topology , you may connect several Model 1004s together in a master/slave arrangement. Maximum distance between the units will vary based upon the number of drops, dat ...

  • Patton electronic 1004 - page 9

    APPENDIX A SPECIFICA TIONS T ransmission Format: Asynchronous Data Rate: Up to 1 15,200 bps T ransmit Line: 2, 4 wire unconditioned twisted pair T ransmit Mode: Full or half duplex T ransmit Level: 0 dBm Range: Up to 9 miles Control Signals: In DCE mode, DSR turns “ON” immediately after the terminal raises DTR; DCD turns “ON” after recogniz ...

  • Patton electronic 1004 - page 10

    APPENDIX C BLOCK DIAGRAM 17 ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic 1004 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1004 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1004
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1004.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1004, service manual, brief instructions and user manuals Patton electronic 1004. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1004.

Similar manuals

A complete manual for the device Patton electronic 1004, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1004 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1004.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1004 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1004, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1004, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1004 - which should help us in our first steps of using Patton electronic 1004
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1004
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1004 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1004?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1004, ask a question using the form below. If a user had a similar problem with Patton electronic 1004 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)