English dropdown-ico

Manual Runco XP-50

82 pages 4.72 mb
Download

Go to site of 82

Summary
  • Runco XP-50 - page 1

    XP-50 XP-65 High Definition, 1080p Flat Panel Plasma Displays with I NSTALLATION /O PERATION M ANUAL ...

  • Runco XP-50 - page 2

    ...

  • Runco XP-50 - page 3

    CinemaWall XP-50/XP-65 Insta llation/Operation Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This RuncoCare St andard Limite d Warranty is provi ded free o ...

  • Runco XP-50 - page 4

    iv Cine maWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco deale r or Runco Technical Suppo rt via E-mail at support@runc o.com or via phone at (toll fr ee) 800-23RUNCO (80 0-237-8626). If ...

  • Runco XP-50 - page 5

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual v PRE L IMINAR Y j Failure to follow mainten ance procedu res as outline d in the pro duct’s user g uide where a schedule is spec ified for regular cleaning of th e product k Opening the pro duct and/or tam pering with intern al circuitr y l Products lost, stolen or discarded m Any damage or ...

  • Runco XP-50 - page 6

    vi CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LI MITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. 1. RUNC O SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF ...

  • Runco XP-50 - page 7

    CinemaWall XP-50/XP-65 Inst a llation/Operati on Manual vii PRE L IMINAR Y Thank you for your purchas e of this quality Run co product! For best perfor mance, please read this ma nual carefully a s it is you r guide throug h the men us and oper ation. 1. Read these instruction s. 2. Keep these instructions . 3. Heed all warnings. 4. Follow all inst ...

  • Runco XP-50 - page 8

    viii CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, LLC Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declare s that the p roducts Mode l Numbers: XP-50 and XP-65 conform with th e provisions of: Council Directive 2004/108/EC on Electromagnet ...

  • Runco XP-50 - page 9

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This ...

  • Runco XP-50 - page 10

    x CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 11

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................... ................. ....... iii Important S afety In s truction s .......................... ............. ................ ................ ................ vii Compliance Inform ...

  • Runco XP-50 - page 12

    xii Cine maWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y 4. Operation .......... ................ ................ ................ ................ ................ ............. .......... 21 Turning on t he Power ... ................. ................ ................ ................ ................ ............. 2 1 Changing ...

  • Runco XP-50 - page 13

    CinemaWall XP-50/XP-65 Installa tion/Operation Manual xiii 1 Li s t of Figure s PRE L IMINAR Y 2-1. CinemaWall X P-50 Front-Pan el Controls and Ind icators .......................... ................ ..... 5 2-2. CinemaWall X P-65 Front-Pan el Controls and Ind icators .......................... ................ ..... 5 2-3. CinemaWall Re ar Panel . ...

  • Runco XP-50 - page 14

    List of Figures xiv CinemaWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 15

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual d escribes how to install, set up and operate a Runco CinemaWall XP-50/XP-65 Flat-Panel Plasma Di splay Monitor. Throughout th is manual, the Run co CinemaWall XP-50/XP-6 5 Flat-Panel Pla sma Display Monitor ar e referred to colle cti ...

  • Runco XP-50 - page 16

    Introduc tion 2 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic in ...

  • Runco XP-50 - page 17

    Introd uction CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The CinemaWall XP -50/XP-65 Flat-Pan el Plasma Display Monit or takes picture quality to a whole new le vel, boasting o ur brightest pict ure, best co ntrast ratio, dee pest black le vels and most spo t-on high definit ion co ...

  • Runco XP-50 - page 18

    Introduc tion 4 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y Parts List Your CinemaWall is shipped with the following items. If any items are missing or damaged , please contact y our Runco de aler or Runco C ustomer Service at (8 00) 23-RUNCO. • CinemaWall XP-50/ XP-65 Flat-Panel Plasma Disp lay Monitor • AC Power Cord ...

  • Runco XP-50 - page 19

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 5 PRE L IMINAR Y 2.1 CinemaWall at a Glance Controls and Indicators Figure 2-1 and Figure 2-2 sh ow the Cinema Wall front-panel con trols and indicato rs. Figure 2-1. CinemaWall XP-50 Front-Pane l Control s and Indicator s Figure 2-2. CinemaWall XP-65 Front-Pane l Control s and Indicator s 2. C ...

  • Runco XP-50 - page 20

    Controls and Functions 6 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y 1. DI S PLA Y S TA N D Optional accessory for table-top installations. 2. POWER BUTTON Connects or disc onnects the d isplay panel f rom the AC po wer source. 3. S T A NDBY/ON INDICA TOR - Lights solid gre en to indicate normal operat ion; - Flashes green ...

  • Runco XP-50 - page 21

    Controls and Functi ons CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 7 PRE L IMINAR Y Connectors Figure 2-3 show s the rear-panel connector loc ations on the Ci nemaWall. Figure 2-3. CinemaWall Rear Panel 1. S LOT 1 (Dual HDMI input) Two, HDCP -complia nt digital video inp uts. 2. S LOT 2 (Dual HDMI input) Two, HDCP -complia nt digital vi ...

  • Runco XP-50 - page 22

    Controls and Functions 8 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y 3. S LOT 3 (COMPONENT/RGB input) Video/audio inp ut (3 x BNC, 2 x RCA) fo r connecting eith er RGB (with sync o n green) or component hig h-definition t elevision signals. 4. PC IN Provides a 15-pi n VGA connection and a 3.5-mm, stereo audio connect ion t ...

  • Runco XP-50 - page 23

    Controls and Functi ons CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 9 PRE L IMINAR Y 2.2 CinemaWall Remote Control Figure 2-4 shows the Cinema Wall remote control an d describes its functiona lity. Figure 2-4. CinemaWall Remote Contro l RESET RETURN 30 60 0 90 OFF TIMER 90 1 2 3 4 PC 4:3 10:00 1 2 3 4 ON SURROUND S URROUND button Press t ...

  • Runco XP-50 - page 24

    Controls and Functions 10 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 25

    CinemaWall XP-50/XP-65 Inst allation/Operation Manual 11 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press on the tab on the batte ry compartmen t cover and lift t he cover in th e direction of the arrow . 2. Insert the incl uded batteries. Ensure that t he polarities c orrectly m atch the and markings inside t ...

  • Runco XP-50 - page 26

    Installation 12 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qui ck overview of the Cinema Wall installation process. The sections following this one provid e detailed instructions. Installation sh ould be performed by a qualified custom video installation specialist. Table 3-1. In s tallati ...

  • Runco XP-50 - page 27

    Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 13 PRE L IMINAR Y 3.3 Installation Considerations Proper installa tion of your Cinema Wall will ensure the highest pos sible picture quality. Whether you are installing the CinemaWall temporarily or perm anently, you s hould take the following int o account to ensure that it perform ...

  • Runco XP-50 - page 28

    Installation 14 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • As it lies flat with th e screen face down. Place the pr otective sheet, which was wrappe d around the plasma monito r when it was packaged, b etween the scr een and your work surfac e to avoid scratching o r otherwise damagi ng the screen su rface. Ambien t Li ...

  • Runco XP-50 - page 29

    Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 15 PRE L IMINAR Y Other Considerations Here are some other co nsiderations and tips that can help improve your inst allation, avoid damage and prolo ng operating life: • Keep the amb ient temperatu re constant and belo w 35°C (95°F). Keep the display away from heating an d/or ai ...

  • Runco XP-50 - page 30

    Installation 16 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 3.4 Connections to the CinemaWall Proceed as follows to connect the Cinem aWall to your video sou rces, external contr oller(s) – if present – and AC power. When connec ting your equipm ent: • Turn off all eq uipment before making any c onnections. • Use th ...

  • Runco XP-50 - page 31

    Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 17 PRE L IMINAR Y RGB and Component Video Connection s : See Figure 3-3 . Figure 3-3. RGB and Component Video Connection s 1. Change th e “COMPONENT/RG B-IN SELECT” setting in the SET UP menu to “COMPONENT” or “RGB” accord ing to the co lor space used b y the source. 2. ...

  • Runco XP-50 - page 32

    Installation 18 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Analog (Computer) RGB Connec tion s : The CinemaWall has an RGB input and a stereo audio in put for conn ecting a pers onal computer; see Figure 3-4 . Figure 3-4. Analog RGB Connection s 1. Refer to Supported Timings on pa ge 62 for a list o f computer signals comp ...

  • Runco XP-50 - page 33

    Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 19 PRE L IMINAR Y RS-232 Controller Connection Use a straight-th rough RS-232 c able with a 9- pin male connec tor to conn ect a PC or home theate r control/au tomation syste m (if present) t o the RS-232 por t on the CinemaWall; see Figure 3-5 . For more in formation abou t using t ...

  • Runco XP-50 - page 34

    Installation 20 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Connecting AC Power Plug the female end of the p ower cord into the AC recep tacle on the rear of the CinemaWall. Conn ect the othe r end to you r AC power source. Figure 3-7. AC Power Connection ➤ XP-50 XP-65 ...

  • Runco XP-50 - page 35

    CinemaWall XP-50/XP-65 Inst allation/Operation Manual 21 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your sour ce compone nts. 2. Press the main power swit ch on the CinemaWall (see Figur e 2-1 or Figur e 2-2 ). The standby/on indica tor lights green. 3. After a brief warm-up period (approximately fi ve seconds), the CinemaWall will display ...

  • Runco XP-50 - page 36

    Operation 22 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 4.4 Setting the Computer Display Propert ies To maximize imag e quality when using the CinemaWall with a persona l computer, you may need to adjust the display properties of your compu ter’s video card . To do this on a Microsoft® Win dows®-based PC: 1. Choose Set ...

  • Runco XP-50 - page 37

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 23 PRE L IMINAR Y 4.5 Selecting an Input Source To select an in put source, press the INPUT b utton on the remote co ntrol repeat edly. 4.6 Changing the Aspect Ratio To change the aspect ratio (s ize and shape) of the displayed image, press the A S PECT ( ) but ton repeated ly on the r ...

  • Runco XP-50 - page 38

    Operation 24 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio S etting (Note) Input Image -> Di s played Image De s cription All A s pect = ON All A s pect = OFF 16:9 16:9 16:9 linearly scales the source active image hori- zontally and vertically to fill a 16:9 screen. With ...

  • Runco XP-50 - page 39

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 25 PRE L IMINAR Y 4:3(1) 4:3 4:3 (4:3(1)) linearly scales the source imag e horizon - tally and vertically to fill a 4:3 screen. Side panels are dis - played at the left and right edges of the screen. 4:3(2) – 4:3(2) displays a 16:9 source image in its original aspect ratio and masks ...

  • Runco XP-50 - page 40

    Operation 26 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 4.7 Using Picture-In-Picture (PIP) Use PIP to display a n image from two sources at th e same time in a variety of ways. For more inform ation on setting up PIP and ho w it works, refer to MULTI PIP SETUP on page 43 . Activating PI P To activate PIP, press the MUL TI ...

  • Runco XP-50 - page 41

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 27 PRE L IMINAR Y Selecting a PIP Target Screen or Inpu t Source Press S ELECT ( ) to choose a target screen (main or su b) for PIP operations . The audio sign al associated w ith the target screen is heard thr ough the speaker s. Press INPUT ( ) to select an input to display on the ta ...

  • Runco XP-50 - page 42

    Operation 28 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • The OSD menu closes after 60 seconds of inactivity. The CinemaWall O SD menus are a rranged hierarch ically, as shown in Fig ure 4-1. Depending on the selected input source and signal characte ristics, some menu options may not be available. Figure 4-1. O S D Menu ...

  • Runco XP-50 - page 43

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 29 PRE L IMINAR Y Figur e 4-1. O S D Menu S tructure for Cine maWa ll (conti nued) S ET UP (2/2) MULTI DISPLAY SETUP ( Note: Must se t MULTI PIP SETUP -> DISPLAY MODE to “-” (normal) MULTI DISPLAY SETUP ON/OFF HORIZONTAL SCALE x2, x3, x4 or x5 VERTICAL SCALE x1, x2, x3, x4 or x5 ...

  • Runco XP-50 - page 44

    Operation 30 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y PICTURE Use the c ontrols in the PICTURE menu to calibra te your Cinema Wall for optimum picture quality. The CinemaWall has been designed to incorporate se tup and calibrati on standards established b y the Imaging Science Foundat ion (ISF). The ISF has developed c a ...

  • Runco XP-50 - page 45

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 31 PRE L IMINAR Y PICTURE MENU: The Cinema Wall provides four p icture memorie s per input fo r storing and recalling image quality settings. To stor e settings in a pictur e memory, highlight PICTURE MENU in the PICTURE menu and select STANDARD, ISF DAY, ISF NIGHT or MONITOR. The Cine ...

  • Runco XP-50 - page 46

    Operation 32 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y BRIGHTNE SS : On y our external test p attern source, s elect a PLUGE pattern. (PLUGE is an acronym for “Picture Line-Up Ge neration Equip ment.”) Fig ure 4-3 shows a typical PLUGE pattern. Figure 4-3 . Typical PLUG E Pattern for Adju s ting Brightne ss PLUGE patt ...

  • Runco XP-50 - page 47

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 33 PRE L IMINAR Y COLOR: On your e xternal test pattern source , select a color bar pattern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select COLOR fro m the PICTURE me nu. While look ing at the c olor bar pa tter ...

  • Runco XP-50 - page 48

    Operation 34 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y S HARPNE SS : “Sharp ness” is the amount of high-frequen cy detail in the im age. To adjust sharpness, select SHARPNESS from the PICTURE menu. On your externa l test pattern source, sele ct a pattern like the one sh own in Figure 4-5 . Adjust as needed, lo oking f ...

  • Runco XP-50 - page 49

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 35 PRE L IMINAR Y • GAMMA: The default ga mma setting ( 2.2 ) is corr ect for almo st all signals and conditions. If excess amb ient light washes out the image an d it becomes diffic ult or impossible to see d etails in dark a reas, lower th e gamma setting to compensat e. This will ...

  • Runco XP-50 - page 50

    Operation 36 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y AUTO S ETUP (PC INPUT only): To automatica lly adjust the p osition, size, clock and phase of incoming computer signals for op timum picture qu ality, press or repeatedly to highlight AUTO SETUP in the menu, then press th e ACTION ( ) butto n. H-PO S /V-PO S : Select ...

  • Runco XP-50 - page 51

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 37 PRE L IMINAR Y SOUND Use the controls in the SOUND m enu to adjust the CinemaWall audio settings. To return al l SOUND menu se ttings to their fac tory-default values, press RE S ET on the remote con trol unit with the m enu on-scree n. Or, press or repeatedly to high light RESET in ...

  • Runco XP-50 - page 52

    Operation 38 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y SET UP Use the contro ls in the SET UP menu to perform a dvanced imag e quality adjustme nts and access various ot her CinemaW all features. S IGNAL: Select SIGNAL from the SET UP m enu to display info rmation about th e current signal and to adjust the following sett ...

  • Runco XP-50 - page 53

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 39 PRE L IMINAR Y • XGA MODE (INPUT3/PC INPUT only): You can force the Cine maWall to use a specific output re solution with RGB PC sources. To do this select XGA MODE from the SIGNAL menu and set it to 1024x76 8, 1280x768 or 1366x76 8. • NOI S E REDUCTION: To apply noise reduction ...

  • Runco XP-50 - page 54

    Operation 40 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • S TART TIME/ S HOW DURATION: Wh en the screen saver MODE is TIME OF DAY, set START TIME to the time of da y that yo u want the screen saver to a ctivate. When the screen sa ver MODE is INTERVAL, set SHOW DURATION to the “normal presentatio n” interval (no sc r ...

  • Runco XP-50 - page 55

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 41 PRE L IMINAR Y POWER S AVE: Select POWER SAVE from the SET UP menu and set it to ON to reduce the overall image intensity by a sm all amount, there by reducing po wer consumption. S TANDBY S AVE: Select STANDBY SAVE from the SET UP menu and set it to ON to minimize powe r consumptio ...

  • Runco XP-50 - page 56

    Operation 42 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • S EAM HIDE S VIDEO: Select SEAM HIDES VIDEO from the MULTI DISPLAY SETUP menu and set it to ON when d isplaying moving im ages on a video wall. SEAM HIDES VIDEO joins the ed ges of adjac ent displays in a v ideo wall together in such a way as to compen sate for th ...

  • Runco XP-50 - page 57

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 43 PRE L IMINAR Y MULTI PIP S ETUP: The CinemaW all can display an image fro m two sources at th e same time in a variety of ways. T o set up this featur e, select MULTI PIP SETUP from the SET UP menu and pre ss the ACTION ( ) button. • MULTI PIP: Select one of th e following to def ...

  • Runco XP-50 - page 58

    Operation 44 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • TRAN S PARENCY / TRAN S PARENCY LEVEL: If you are using the Blend PIP fe ature, you can make the overlay (sub) image t ransparent so tha t the main (backgrou nd) image shows through. To do this, select TRANSPARE NCY from the MULTI PIP SETU P menu and set it to ON. ...

  • Runco XP-50 - page 59

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 45 PRE L IMINAR Y PORTRAIT S ETUP: You can create a video wall consisting of three (3x1) Cin emaWall displays in “portrait” mode and display an en larged image across all of them. To do this, select PORTRAIT SETUP from the SET UP menu and press the ACTION ( ) button. The n, configu ...

  • Runco XP-50 - page 60

    Operation 46 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y OPTIONS Use the controls in the OPTIONS menu to set up the Weekly Co mmand Timer and perform oth er advan ced, install ation-relat ed tasks. To access the OPTION S menu: 1. Press S ET UP . 2. Press or repeatedly until OSD LANGUAGE is highlighted. 3. Press and hold the ...

  • Runco XP-50 - page 61

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 47 PRE L IMINAR Y Weekly Command Timer: You can program the Cine maWall to perfo rm a series of actions at spe cific times of the day and days o f the week. To do this, you cr eate command sequ ences or “p rograms” consisting of a series of up to 64 individu al commands. You can cr ...

  • Runco XP-50 - page 62

    Operation 48 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • Program Edit: To edit the seven timer program s, press or repeatedly t o highli ght Program Edit an d press the ACTION ( ) button. Then, proce ed as follows: a Program: Press or to select a program to edi t. b To define the first comma nd in the program, pre ss to ...

  • Runco XP-50 - page 63

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 49 PRE L IMINAR Y Initial VOL level: Select Initial VOL level from the OPTIONS menu to s et the desired sound volume leve l upon power-up . Press or to set it to On, then use the VOL- or VOL+ ( ) button to set the desired initial volume level. W hen you do, the volume chang es so you c ...

  • Runco XP-50 - page 64

    Operation 50 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Initial Power Mode: Select Init ial Power Mode fr om the OPTION S menu to contr ol how the CinemaWall re covers from a po wer interruption (res ulting either from a power failure o r from being u nplugged, t hen plugged back in): • Normal: The CinemaWall returns to ...

  • Runco XP-50 - page 65

    Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 51 PRE L IMINAR Y Power On S creen Delay: In a large video wall in stallation, it may be advisab le to turn the displays on one at a time rathe r than all at o nce, so as not to overload th e power source . To make this easier, y ou can set the CinemaWall to wait up to 30 seconds after ...

  • Runco XP-50 - page 66

    Operation 52 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 67

    CinemaWall XP-50/XP-65 Inst allation/Operation Manual 53 PRE L IMINAR Y 5.1 Cleaning Regular cleaning w ill extend the life and perfo rmance of the CinemaWall. Befo re cleaning, be sure to u nplug the po wer cord fro m the powe r outlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumstanc es use solvents s uch as ben ze ...

  • Runco XP-50 - page 68

    Maintenance and Troublesh ooting 54 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for troubleshooting pr oblems you may encounter with the CinemaWall. If the suggested solutions fail to resolve th e problem or if you encounter an issue not d escribed here, p ...

  • Runco XP-50 - page 69

    CinemaWall XP-50/XP-65 Inst allation/Operation Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the CinemaWall with a home th eater automation/control system or a PC running terminal emulation soft ware, connect it to your control system or PC as shown in Figure 3-5 . U s e a s traight-thr ough cable . Configure th ...

  • Runco XP-50 - page 70

    Serial Communications 56 CinemaWall XP-50/XP-65 Inst allation/Operation Manual P RELI M INARY Table 6-1 lists th e CinemaWall serial command set. Table 6-1. S erial Command s A S CII Hex De s cription AAC:MENCLR 41 41 43 3A 4D 45 4E 43 4C 52 Audio Menu (Clear) AAC:MENDYN 41 41 43 3A 4D 45 4E 44 59 4E Audio Menu (Dynamic) AAC:MENSTD 41 41 43 3A 4D 4 ...

  • Runco XP-50 - page 71

    Serial Communications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 57 PRE L IMINAR Y DWA:OVLON 44 57 4 1 3A 4F 56 4C 4F 4E Advan ced PIP mode (ON) DWA:PIN 0 44 57 41 3A 50 49 4E 30 The location of th e sub picture (lower right) DWA:PIN 1 44 57 41 3A 50 49 4E 31 The location of th e sub picture (lower left) DWA:PIN 2 44 57 41 3A 50 49 4E 32 ...

  • Runco XP-50 - page 72

    Serial Communications 58 CinemaWall XP-50/XP-65 Inst allation/Operation Manual P RELI M INARY OSP:SCR0 4F 53 50 3A 53 43 52 30 Screen Saver SCROLLING BAR ONLY (OFF) OSP:SCR1 4F 53 50 3A 53 43 52 31 Screen Saver SCROLLING BAR ONLY (ON) POF 50 4F 46 Power OFF PON 50 4F 4E Power ON SSC:FNC0 53 53 43 3A 46 4E 43 30 Screen Saver func ti on (SCROLLING BA ...

  • Runco XP-50 - page 73

    CinemaWall XP-50/XP-65 Inst allation/Operation Manual 59 PRE L IMINAR Y 7.1 CinemaWall Specifications Table 7-1 lists the CinemaW all specificat ions. 7. S pecification s Table 7-1. CinemaWall S pecification s Native Re s olution: 1920 x 1080 S creen S ize: XP-50: 43.50 in. W x 24.50 in. H (1106.0 x 622.0 mm) 50 in. (1270.0 mm) diagonal XP-65: 56.5 ...

  • Runco XP-50 - page 74

    Specifications 60 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 7.2 CinemaWall Dimensions Figure 7-1 and Figure 7-2 sho w the CinemaWall dimensio ns (all dimensions are in inches). Figure 7-1. CinemaWall Model XP-50 Dimen s ion s (with Optional Table S tand) 50.26 29.98 15.50 5.07 4.06 6.88 0 1.75 1.17 8.48 21.08 29.57 25.98 ...

  • Runco XP-50 - page 75

    Specifications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 61 PRE L IMINAR Y Figure 7-2. CinemaWall Model XP-65 Dimen s ion s (with Optional Table S tand) 0 7.81 12.31 1.98 2.35 3.69 62.45 54.64 50.14 0 2.83 37.69 1.34 IR RECEIVER & LED INDICA TOR 1.26 2.49 all around 66.13 17.00 0 .55 61.90 62.45 10.09 2.07 4.07 6.02 0 2.83 33.86 37. ...

  • Runco XP-50 - page 76

    Specifications 62 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types supported by each input on the Cinema Wall. Table 7-2. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) S upported? ( √ = Ye s , ...

  • Runco XP-50 - page 77

    Specifications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 63 PRE L IMINAR Y 480/60i 720x487 59.94 15.734 13.500 √ – √ 480/60p 720x483 59.94 31.469 27.00 0 √ √ √ 576/50i 720x576 50.00 15.625 14.750 √ – √ 576/50p 720x576 50.00 31.250 29.00 0 √ √ √ 720/50p 1280x 720 50.00 37.500 75.250 √ √ √ 720/60p 1280x 720 6 ...

  • Runco XP-50 - page 78

    Specifications 64 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 79

    CinemaWall XP-50/XP-65 Inst a llation/Operation Manual A-1 PRE L IMINAR Y Table A-1 lists th e CinemaWall fact ory-default imag e settings. All of t hese setting s are in the PICTURE menu except for 1:1 PIXEL MODE , which is in the POS./SIZE men u. Appendix A. Default S etting s Table A-1. Runco Factory Default S etting s for CinemaWall Menu S etti ...

  • Runco XP-50 - page 80

    Default Settings A-2 CinemaWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50 - page 81

    ...

  • Runco XP-50 - page 82

    Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com SERIAL NUMBER 020-0970- 00 Rev. B March 2009 ...

Manufacturer Runco Category Flat Panel Television

Documents that we receive from a manufacturer of a Runco XP-50 can be divided into several groups. They are, among others:
- Runco technical drawings
- XP-50 manuals
- Runco product data sheets
- information booklets
- or energy labels Runco XP-50
All of them are important, but the most important information from the point of view of use of the device are in the user manual Runco XP-50.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Runco XP-50, service manual, brief instructions and user manuals Runco XP-50. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Runco XP-50.

Similar manuals

A complete manual for the device Runco XP-50, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Runco XP-50 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Runco XP-50.

A complete Runco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Runco XP-50 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Runco XP-50, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Runco XP-50, that we can find in the current document
3. Tips how to use the basic functions of the device Runco XP-50 - which should help us in our first steps of using Runco XP-50
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Runco XP-50
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Runco XP-50 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Runco XP-50?

Use the form below

If you did not solve your problem by using a manual Runco XP-50, ask a question using the form below. If a user had a similar problem with Runco XP-50 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)