English dropdown-ico

Manual dbx Pro Vacuum Tube Microphone PreAmp

12 pages 0.14 mb
Download

Go to site of 12

Summary
  • dbx Pro Vacuum Tube Microphone PreAmp - page 1

    ® Mini-Pre User Manual V acuum T ube Microphone PreAmp mini comp manual 8/16/01 1:48 PM Page 1 ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 2

    WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING: KEEP THESE INSTRUCTIONS HEED ALL W ARNINGS FOLLOW ALL INSTRUCTIONS CLEAN ONL Y WITH A DAMP CLOTH. DO NOT BLOCK ANY OF THE VENTILA TION OPENINGS. INST ALL IN ACCORDANCE WITH THE MANUF ACTURERS INSTRUCTIONS. DO NOT I NST ALL NEAR ANY HEA T SOURCES SUCH AS RADI - A T ORS, HEA T REGISTERS, STOVES; ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 3

    U.K. MAINS PLUG W ARNING A molded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable disposal facility. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use the mains plug with- out the fuse cover in place. Replacement fuse covers can be obtain ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 4

    If you require technical support, contact dbx Customer Service. Be prepared to accurately describe the problem. Know the serial number of your unit - this is printed on a sticker attached to the bottom of the unit. If you have not already taken the time to fill out your warranty registration card and send it in, please do so now. Before you return ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 5

    This warranty is valid only for the original purchaser and only in the United States. 1. The warranty registration card that accompanies this product must be mailed within 30 days after purchase date to validate this warranty. Proof-of-purchase is considered to be the burden of the consumer . 2. dbx warrants this product, when bought and used solel ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 6

    Congratulations on your purchase of the dbx Mini-Pre! For 30 years, dbx has been the industry leader in dynamics processing. With the introduction of the MINI-PRE, we are now able to offer our superior dynamics processing technology in a compact and affordable product design. This manual will be your guide to understanding the full functionality of ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 7

    Po w er Supply Connector Connect the included PS 0913 power supply at this point. Po w er Supply Cord Strain Relief To prevent any untimely power supply interruptions, it is recommend that the power supply cable be looped over the hook of the power supply cord strain relief. XLR Output Connector The XLR output of the Mini-Pre is balanced. The XLR o ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 8

    1/4” Balanced TRS Input Connector The 1/4” input connector of the Mini-Pre is unbalanced TS. The 1/4” input is ideal for running instrument cables directly into the Mini-Pre. Input Gain Control +24 to +60dB Use the Input gain control to set the overall amount of input gain being fed into the Min-Pre. Turning the Gain control clock wise will i ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 9

    +48volt Switch The +48 volt switch (pushed in) is used to supply power to any microphone that requires +48volt phantom power . +20dB Pad Switch The +20dB Pad switch is used to select the desired gain range of the Mini-Pre. When the switch is not depressed, the Mini-Pre is in normal +26 to 60dB mode. When the +20dB Pad switch is pressed, the gain ra ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 10

    Mini T ube Pre Applications In addition to being designed specifically for portable desktop tube microphone preamp applications, the Mini Tube Pre is also ideal to be used in numerous other applications. These applications include the following: Live Applications The Mini-Pre is perfect for live vocal microphones and instruments. This is ideal to u ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 11

    Microphone Input Connector: Female XLR Pin 2 Hot Type: Electronically balanced/unbalanced Impedance: 2k Ω Maximum Input Level: -10 dBu or +10 dBu with 20 dB pad engaged CMRR: Typically >80dB at 1kHz Equivalent Input Noise: Typically -125 typical dBu with a 150 Ω source load “A-weighted” Line Input Connector: TS 1/4" Jack Type: Elect ...

  • dbx Pro Vacuum Tube Microphone PreAmp - page 12

    8760 South Sandy Parkway Sandy, Utah 84070 Phone: (801) 568-7660 Fax (801) 568-7662 Int’l Fax: (801) 568-7583 E-mail us at: customer@dbxpro.com or visit our W orld Wide W eb home page at: www.dbxpro.com A Harman International Company ® 18-1304 mini comp manual 8/16/01 1:48 PM Page 12 ...

Manufacturer dbx Pro Category Stereo Amplifier

Documents that we receive from a manufacturer of a dbx Pro Vacuum Tube Microphone PreAmp can be divided into several groups. They are, among others:
- dbx Pro technical drawings
- Vacuum Tube Microphone PreAmp manuals
- dbx Pro product data sheets
- information booklets
- or energy labels dbx Pro Vacuum Tube Microphone PreAmp
All of them are important, but the most important information from the point of view of use of the device are in the user manual dbx Pro Vacuum Tube Microphone PreAmp.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals dbx Pro Vacuum Tube Microphone PreAmp, service manual, brief instructions and user manuals dbx Pro Vacuum Tube Microphone PreAmp. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product dbx Pro Vacuum Tube Microphone PreAmp.

Similar manuals

A complete manual for the device dbx Pro Vacuum Tube Microphone PreAmp, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use dbx Pro Vacuum Tube Microphone PreAmp by users. Manuals are usually written by a technical writer, but in a language understandable to all users of dbx Pro Vacuum Tube Microphone PreAmp.

A complete dbx Pro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual dbx Pro Vacuum Tube Microphone PreAmp - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the dbx Pro Vacuum Tube Microphone PreAmp, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the dbx Pro Vacuum Tube Microphone PreAmp, that we can find in the current document
3. Tips how to use the basic functions of the device dbx Pro Vacuum Tube Microphone PreAmp - which should help us in our first steps of using dbx Pro Vacuum Tube Microphone PreAmp
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with dbx Pro Vacuum Tube Microphone PreAmp
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of dbx Pro Vacuum Tube Microphone PreAmp in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning dbx Pro Vacuum Tube Microphone PreAmp?

Use the form below

If you did not solve your problem by using a manual dbx Pro Vacuum Tube Microphone PreAmp, ask a question using the form below. If a user had a similar problem with dbx Pro Vacuum Tube Microphone PreAmp it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)