-
Sanyo DSR-3506P - page 1
e00_l8hbe_xe_nw _7.book Page 1 Mon day, April 26, 2004 10:40 A M ...
-
Sanyo DSR-3506P - page 2
English 1 CONTENTS 1 NETWORK CONTROL FUNCTIO N .............. 2 Operations possible with PC control ............ .. 2 Network settings .......................... ............. ..... 2 2 PREPARING FOR NETWORK CONTROL ... 5 Controlling from a PC . ................ ................ .... 5 Controlling from the unit ............................. .... 7 ...
-
Sanyo DSR-3506P - page 3
2 English NETWORK CONTROL 1 NETWORK CONTROL FUNCTION PC control (i.e., remote control) will be possibl e when this unit is connected to a network. z Menu settings, recording, playback, an d other similar operations will be possible from the PC screen. z Up to a maximum of four PCs can be simultaneously connected to a single DVR (Digital Video Recor ...
-
Sanyo DSR-3506P - page 4
NETWORK CONTROL FUNCTION 1 English 3 (1) Double-c lick the DVR View er’s “Setup .exe” icon in order to launch the inst aller. After several moments, the “InstallShield Wizard” window will be displayed and insta llation will start. When installation has ended , the “Maintenance Complete” window will be d isplayed. (2) Click [Finish]. T ...
-
Sanyo DSR-3506P - page 5
NETWORK CONTROL FUNCTION 1 4 English NETWORK CONTROL Computer: PC/AT compatible machine Operating system: Window s 98/98SE/Me/NT4.0/2000/XP Browser: Internet Explor er Ver. 5.0 or later Video: 65,000 colors, resolution 800 x 600 dpi or higher Recommended specification s CPU: Pentium® III (500 MHz) or better RAM: 256 MB minimum OS: Windows 2000, XP ...
-
Sanyo DSR-3506P - page 6
English 5 2 PREPARING FOR NETWORK CONTROL 1 Launch the PC’s web browser. Internet Explorer versions 5.0 and later are supported. In terms of OS, Windows 98, 9 8SE, Me, NT4.0, 2000, an d XP are supported. z If the Java Script run-time error message is displayed while Internet Explorer is being used, modify th at application’ s settings as follow ...
-
Sanyo DSR-3506P - page 7
PREPARING FOR NETWORK CONTROL 2 6 English NETWORK CONTROL 4 Entering the operation screen (1) The following screen will be disp layed when password verification has been completed successfully. (2) Select the language and click [OK]. The opera tion screen will be displaye d and computer control wi ll now be possible. z Connection will not be p ossi ...
-
Sanyo DSR-3506P - page 8
PREPARING FOR NE TWORK CONTROL 2 English 7 Whenever the button on th e PC’s operation screen is clicked, access will be cancelled and control rights will switch back to the unit. z To forcibly cancel PC acce ss from the unit, press and hold the [EXIT] button for at least 2 seconds. z Access from the PC will not be permitted fo r a period of 10 se ...
-
Sanyo DSR-3506P - page 9
8 English NETWORK CONTROL 3 OPERATION PANEL FUNCTIONS AND RESTRICTIONS Operation panel 1. Channel nu mber Displays the channel number selected usin g “2. Channel selection” below. 2. Channel selection (ID1/2/3) Used to select a camera chan nel when displaying video on a single screen. 3. [MULTI VIEW ] (ID1/2/3) Used to display video in six spli ...
-
Sanyo DSR-3506P - page 10
English 9 1 SETTINGS Before using the unit, settings should be made for recording conditions, installation environmen t, and other similar factors. The corresponding menu items are displayed in a two-level structure comprising main menus and sub-menus. For more details regarding setting methods, see “2. MENU-SPECIFIC SETTINGS” ( J P. 11). 1 Cli ...
-
Sanyo DSR-3506P - page 11
SETTINGS 1 10 English NETWORK SETTINGS * indicates t he displa y of information only. z Pull-down menus When a pull-down menu is clicked, the list of available selections will be displayed. Select the required val ue. Menu structure Main menu Sub menu Reference page Recording conditions 1. CLOCK SET z CLOCK SET 11 2. SUMMER TIME SET/ EXT. C LOCK SE ...
-
Sanyo DSR-3506P - page 12
English 11 2 MENU-SPECIFIC SETTINGS Set the unit’s time and date as described be low. Be sure that the date and time are set correctly at this time. 1 Select the “Day/Month/Year/Hou r/ Minutes” field from the pull-down menu on the screen. The day of the week will be set automatically based on the date. 2 Click [SET]. The current time is set. ...
-
Sanyo DSR-3506P - page 13
MENU-SPECIFIC SETTINGS 2 12 English NETWORK SETTINGS Set specific days as holidays using the procedure described bel ow. When a day is specified as a holiday, timer recording for that day will be carried out as if it were a Sunday. Dates such as na tional holidays a nd company off days should be set as holidays when you want th ose dates to have th ...
-
Sanyo DSR-3506P - page 14
MENU-SPECIFIC SETTINGS 2 English 13 The unit’s hard disk is separated into three independent reco rding areas. Furthermore, five diffe rent recording modes can be used for these th ree areas. The memory capacity for each area is alloca ted as a percentage. (Setting units: 1%) 1 Total capacity display This section displays the total capacity of th ...
-
Sanyo DSR-3506P - page 15
MENU-SPECIFIC SETTINGS 2 14 English NETWORK SETTINGS Set the permission for overwriting to recording areas or th e remaining-space warning level as described below. When the normal recording area has be en filled with data, this setting dictates whether recording will be stoppe d or continued by overwriting the recorded image s currently stored on ...
-
Sanyo DSR-3506P - page 16
MENU-SPECIFIC SETTINGS 2 English 15 Set conditions for normal record ing and timer recording as described below. Set the picture quality for recording to the normal recording area as follows. 1 Select “PICTURE QUALITY” from the pull-down menu on the screen. [Settings] ( indicates default setting.) Audio can be recorded together with images ...
-
Sanyo DSR-3506P - page 17
MENU-SPECIFIC SETTINGS 2 16 English NETWORK SETTINGS When monitoring a numb er of cameras connected to this digital video recorder, a separa te recording rate can be set for each camera. In addition, video recorded from each camera and the corresponding recording ra tes can b e set in programs with up to four pa tterns, thus facilitating the simple ...
-
Sanyo DSR-3506P - page 18
MENU-SPECIFIC SETTINGS 2 English 17 Set timer operation duration and ti mer recording co n ditions on a day-specific basis as shown below. 1 Setting timer recording conditions for different days of the week. (1) WEEK These fields specify the da ys of the week for timer recording. By using multiple setting rows, it is possible to setup timer recordi ...
-
Sanyo DSR-3506P - page 19
MENU-SPECIFIC SETTINGS 2 18 English NETWORK SETTINGS Set the recording conditio ns for alarm recording as follows. In order to carry out alarm record ing, it will be necessary to set operation patterns and recording conditions. 1 Select a mode using “ALARM RECORDING” from the pull-down menu on the screen. [Settings] ( indicates default sett ...
-
Sanyo DSR-3506P - page 20
MENU-SPECIFIC SETTINGS 2 English 19 5 Select “REC RATE” from the pull-down menu on the screen. (Default setting: A15 FPS) The letter “A” will be displayed in fron t of recording rates that can be set for au dio recordin g. 6 Set the duration for alarm recording using “DURATION” from the pull-down menu on the screen. 5 SEC, 10 SEC, 20 SE ...
-
Sanyo DSR-3506P - page 21
MENU-SPECIFIC SETTINGS 2 20 English NETWORK SETTINGS Set the alarm triggers (i.e., laun ch signals) that constitute operation conditions for alarm recording as follows. 10 Select a launch signal for al arm recording using “ALARM TRIGGER” from the pull-down menu on the screen. [Settings] ( indicates default setting.) z External alarm detecti ...
-
Sanyo DSR-3506P - page 22
MENU-SPECIFIC SETTINGS 2 English 21 Set a warning buzzer to sound for a larms or when the hard disk space reaches zero as described below. 1 Select “ON” or “OFF” for the alarm buzzer. 2 Click [SAVE]. The new settings are saved. z These settin gs apply to the digita l video recorder’s buzzer. To sound a buzzer on the PC, refer to NOTE. To ...
-
Sanyo DSR-3506P - page 23
MENU-SPECIFIC SETTINGS 2 22 English NETWORK SETTINGS This screen provides information regarding the hard di sk. (1) Hard disk capacity This item displays the total capacity of the hard disk. If hard disk expansion is carried out, a value will be displayed for each disk. (2) MIRRORING This item displays settings r elevant to mirroring-type recording ...
-
Sanyo DSR-3506P - page 24
MENU-SPECIFIC SETTINGS 2 English 23 z If a value other than “80” is set a s the default va lue for the port, when specifying the URL , enter a co lon (:) and then the port number af ter the IP address. For example, if the port number was set as “81”, you should enter http://192.168.0.1:81 / z If settings are change d dur ing network control ...
-
Sanyo DSR-3506P - page 25
MENU-SPECIFIC SETTINGS 2 24 English NETWORK SETTINGS Use the following procedure to set video from individual cameras to be masked by a gray pattern when it is not needed on a monitor screen. 1 Set the following functions as require d. 2 Click [SAVE]. The setting is saved. z Network mask settings are valid only for the user connecting to the networ ...
-
Sanyo DSR-3506P - page 26
English 25 1 RECORDING IMAGES This section will describe the way in which monitored images and alarm images can be stored on the unit’s internal hard disk. Before any of these operati ons can be carried out, i t will be necessary to make me nu settings to match the installati on environment . ( J P. 10) Monitored images can be reco rded to the no ...
-
Sanyo DSR-3506P - page 27
RECORDING IMAGES 1 26 English NETWORK OPERATION (1) READ INTERVAL (Default setting: 1) This item allows you to select one of five image display speeds. Larger setting numbers correspond to higher speed s; however, the actual speed will de pend on the speed of your network connection. * When “(4) AUDIO” is set to “ON”, “READ INTERVAL” ca ...
-
Sanyo DSR-3506P - page 28
RECORDING IMAGES 1 English 27 (8) NORMAL RECORDING MODE This item displays the cu rrent conditio n for normal recording. z STOP z RECORDING z TIMER STANDBY z TIMER RECORDING z AREA FULL (in normal recordin g area) (9) ALARM RECORDING MODE This item disp lays the current cond ition for alarm recording. z STOP z PRE ALARM RECORDING z ALARM RECORDING ...
-
Sanyo DSR-3506P - page 29
28 English NETWORK OPERATION 2 WATCHING IMAGES Monitored live images and recorded images can be viewed freely and whenever so require d. Note that switching to live or playback images, modi fying the screen display, and other similar opera tions have absolutely no effect on time r recording and alarm recording. Click the (Playback stop ) button on ...
-
Sanyo DSR-3506P - page 30
WATCHING IMAGES 2 English 29 When a number of came ras are connected to the digital video recorder, it is possible to monitor video fro m several of these in multi-scree n format. Use the following procedures to specify the channel numbers for the cameras to be displayed and the number of screens. Click a [CHANNEL]. Click the button for the camera ...
-
Sanyo DSR-3506P - page 31
WATCHING IMAGES 2 30 English NETWORK OPERATION The images displayed on screen can be adjuste d in a number of ways. To make an adjustment, select the adju stment value from the menu and then click [SET] from the pull-down menu on the screen. (1) READ INTERVAL (Default setting: 1) This item allows you to select one of five image display speeds. Larg ...
-
Sanyo DSR-3506P - page 32
WATCHING IMAGES 2 English 31 (6) Image mode LIVE: Live mode PLAY: Play mode (7) Time Live mode: Displays the current time Play mode: Displays the recording time (8) NORMAL RECORDING MODE This item displays the cu rrent conditio n for normal recording. z STOP z RECORDING z TIMER STANDBY z TIMER RECORDING z AREA FULL (in normal recordin g area) (9) A ...
-
Sanyo DSR-3506P - page 33
WATCHING IMAGES 2 32 English NETWORK OPERATION 3 Set “DURATION”. The duration for images to be saved to the PC should be set in units of one minute. 4 Click [BROWSE]. A dialog box for selecting save location wi ll be displaye d, and a suitable location should be se t. z It is also acce ptable to input a l ocation for saving directly into “D E ...
-
Sanyo DSR-3506P - page 34
English 33 3 SEARCH MODE Images stored in the recording areas can be searched and play ed back in search mode. Furthe rmore, five different search methods are available for doing so. 1 In live mode (When playback is stopped), click the button on the operation panel. The SEARCH screen is displayed. 2 Select and click the desired search mode from the ...
-
Sanyo DSR-3506P - page 35
34 English NETWORK OPERATION 4 OPERATIONS IN SEARCH MODES In alarm search mode, images recorded in the alarm recording area are presented as a list of alarm numbers. Accordingly, alarm images from the recording list can be searched and played back. (1) NO: Alarm number (2) DATE/TIME: Recording date and time (3) CH: Displays the channel on which ala ...
-
Sanyo DSR-3506P - page 36
OPERATIONS IN SEARCH MODES 4 English 35 In date/time search mode , images from the normal recording area or the alarm recording area can be played back by specifying the corresponding date and time. (1) RECORDING TOP: Displays the date and time of the oldest recording (2) RECORDING END: Displays the date and time of the newest recording (3) CHANNEL ...
-
Sanyo DSR-3506P - page 37
OPERATIONS IN SEARCH MODES 4 36 English NETWORK OPERATION By setting images recorded in the hard disk’s normal recording area or alarm re cording area to the motion sensor, variations from these images as a result of the presence of an intruder or t he like can be detected, and the corresponding imag es can be played back. (1) SEARCH FROM The rec ...
-
Sanyo DSR-3506P - page 38
English 37 5 SAVING RECORDED IMAGES You can use th e procedures described b elow to copy recorded images to the hard disk’s archive area or to download images to a PC or the like. These functions should b e used to backup impo rtant images from the normal recording area and the al arm recording ar ea. z Copied data is stored o ne image at a time. ...
-
Sanyo DSR-3506P - page 39
SAVING RECORDED IMAGES 5 38 English NETWORK OPERATION Use the following pro cedure to download reco rded images to a PC. (1) Recording date/time: T he recording da te and ti me for the image currently being played ba ck (2) PLAYBACK AREA: The area in which the image currently be ing played back is recorded z NORMAL z ALARM z ARCHIVE (3) HOW MANY: S ...
-
Sanyo DSR-3506P - page 40
SAVING RECORDED IMAGES 5 English 39 * Image viewer screen This screen allows you to check images that have been download ed. (1) [TOP] Displays the first image. (2) [PREV.] Moves to the previous image. (3) [R.PLAY] Starts reverse playback. Whe n the first image is reached, reverse playback will automatically conti nue from the last image. (4) [STOP ...
-
Sanyo DSR-3506P - page 41
40 English DVR VIEWER 1 DVR VIEWER The DVR Viewer is a program designed specifically fo r DVRs. It can be used to play back image and sound data that has been copied onto media such as computer hard disk drives, CompactFlash cards. The DVR Viewer can be downloaded from the Sanyo website at the URL g iven below. Sanyo website URL: http://www.sanyose ...
-
Sanyo DSR-3506P - page 42
DVR VIEWER 1 English 41 From the Start menu, select [Programs] → [DVR Viewer] → [DVR Viewer] in the sequence to start the program. When DVR Viewer starts up, the following default window appears. z If you create a shortcut icon for DVR Viewer on the desktop, you can open DVR Viewer quickly by double - clicking the shortcut icon. To create a sho ...
-
Sanyo DSR-3506P - page 43
DVR VIEW ER 1 42 English DVR VIEWER This contains commands that are most often used. (1) Corresponds to the [Open (O)] command in the [File (F)] menu. (2) Corresponds to the [Print (P)] command in the [File (F)] menu. (3) Corresponds to the [Help (H)] command. When DVR Viewer i s opened, you can open files to be played back by the following pr oced ...
-
Sanyo DSR-3506P - page 44
DVR VIEW ER 1 English 43 When image files are opened , the images t hat have be en loaded appear. The displa y window consists of a main window and a thumbnail windo w, and you can use various o perations in these windows such as a slideshow. (1) Main window When you double-click a thumbna il image, the image appears larger in the main window. When ...
-
Sanyo DSR-3506P - page 45
DVR VIEW ER 1 44 English DVR VIEWER (3) Control panel This is used for playback operations in the main window and to adjust the images. (1) [TOP] Moves to the start of a slideshow. (2) [PREV] Moves to the previous image in a slideshow regardless of the setting for “(8) SKIP”. (3) [RPLAY] Reverses back of the slideshow by skipping through the nu ...
-
Sanyo DSR-3506P - page 46
DVR VIEWER 1 English 45 Specified images can be printe d as full screens together with date and time information. 1 To print the image in the main win dow Select [Print (P)] from the [ F ile (F)] menu, or click the icon on the toolbar. T he Windows print dia log box appears. Make any settings that are required such as selectin g the printer and the ...
-
Sanyo DSR-3506P - page 47
e00_l8hbe_xe_nw_7.b ook Page 46 Monday, Ap ril 26, 2004 10:40 AM ...
-
Sanyo DSR-3506P - page 48
e00_l8hbe_xe_nw_7.b ook Page 47 Monday, Ap ril 26, 2004 10:40 AM ...
Do you have a question concerning Sanyo DSR-3506P?
Use the form below
If you did not solve your problem by using a manual Sanyo DSR-3506P, ask a question using the form below. If a user had a similar problem with Sanyo DSR-3506P it is likely that he will want to share the way to solve it.