Manual Crestron Battery Pack TPS-6X-BTP

20 pages 5.19 mb
Download

Go to site of 20

Summary
  • Crestron Battery Pack TPS-6X-BTP - page 1

    Crestron TPS-6X-BTP Battery Pack for TPS-6X Installation Guide ...

  • Crestron Battery Pack TPS-6X-BTP - page 2

    This document was prepared and written by th e Technical Documentation departm ent at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Industry C ompliance As of the date of manufacture, the TPS-6X-BTP has bee n tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunica tions ...

  • Crestron Battery Pack TPS-6X-BTP - page 3

    Crestron TPS-6X-BTP Battery Pack for TPS-6X Contents Battery Pack for TPS-6X: TPS-6X-BTP 1 Introduc tion ................................................................................................................... ............ 1 Features and Functions ........................................................................................... ...

  • Crestron Battery Pack TPS-6X-BTP - page 4

    ...

  • Crestron Battery Pack TPS-6X-BTP - page 5

    Crestron TPS-6X-BTP Battery Pack for TPS-6X Battery Pack for TPS-6X: TPS-6X-BTP Introduction The Crestron ® TPS-6X-BTP is a replacement NiMH rechargeable battery pack for the TPS-6X Wireless Touchpa nel. One TPS-6X-BTP is included with each TPS-6X. Installation of th e TPS-6X-BTP battery pack requires tools and should be performed by a qualified t ...

  • Crestron Battery Pack TPS-6X-BTP - page 6

    Battery Pack for TPS-6X Crestron TPS-6X-BTP Specifications Specifications for the TPS-6X-BTP are listed in the following table. TPS-6X-BTP Specifications SPECIFICATION DETAILS Output Voltage 4.8 Volts DC Capacity 2000 mAh Composition Nickel Metal Hydride (NiMH) Usage Per Charge ~2 hours continuous, ~24 hours under normal use (10% active duty cycle ...

  • Crestron Battery Pack TPS-6X-BTP - page 7

    Crestron TPS-6X-BTP Battery Pack for TPS-6X Physical Description The TPS-6X-BTP consists of two battery cells, along with the integrated wiring. It has a multi-pin connector for attachment inside the TPS-6X. TPS-6X-BTP Physical View Installation Guide – DOC. 6740C Battery Pack for TPS-6X: TPS-6X-BTP • 3 ...

  • Crestron Battery Pack TPS-6X-BTP - page 8

    Battery Pack for TPS-6X Crestron TPS-6X-BTP Setup Removal NOTE: The TPS-6X Wireless Touchpanel contains ESD (electrostatic discharge) sensitive devices. To avoid damaging the unit, perform the following procedure while wearing a grounding strap that is properly grounded or on a grounded workstation. NOTE: To prevent damage to the multi-pin connecto ...

  • Crestron Battery Pack TPS-6X-BTP - page 9

    Crestron TPS-6X-BTP Battery Pack for TPS-6X 2. Remove the four screws that secure the front bezel to the touchpanel and return the unit to its normal, face-up position. (Use care and hold the bezel to the rest of the touchpanel. If the bezel separates from the rest of the t ouchpanel while rotating the unit to its normal position, the internal part ...

  • Crestron Battery Pack TPS-6X-BTP - page 10

    Battery Pack for TPS-6X Crestron TPS-6X-BTP 5. Remove the orange tape securing the battery pack wires to the circuit board and the two pieces of clear tape on each battery cell. (Refer to illustration below.) TPS-6X Assembly (Removed from Enclosure) 6 • Battery Pack for TPS-6X: TPS-6X-BTP Installation Guide – DOC. 6740C ...

  • Crestron Battery Pack TPS-6X-BTP - page 11

    Crestron TPS-6X-BTP Battery Pack for TPS-6X 6. Using the flat end of a small slot head screwdriver, gently separate the multi-pin connector from the corresponding connector on the circuit board of the TPS-6X. (Refer to illustration below.) TPS-6X-BTP Connector on TPS-6X 7. Remove battery cells with th e connecting wires attached, from either side o ...

  • Crestron Battery Pack TPS-6X-BTP - page 12

    Battery Pack for TPS-6X Crestron TPS-6X-BTP Installation NOTE: The TPS-6X Wireless Touchpanel contains ESD (electrostatic discharge) sensitive devices. To avoid damaging the unit, perform the following procedure while wearing a grounding strap that is properly grounded or on a grounded workstation. After completing removal of the old TPS-6X-BTP fro ...

  • Crestron Battery Pack TPS-6X-BTP - page 13

    Crestron TPS-6X-BTP Battery Pack for TPS-6X 4. Dress the cables of the TPS-6X-BTP as shown in the illustration below and apply the 2-inch (50 mm) piece of orange tape that came with the TPS-6X-BTP to hold the wires in place. 5. Apply the two 1 inch (25 mm) pieces of orange tape that came with the TPS-6X-BTP to each battery cell, extending the tape ...

  • Crestron Battery Pack TPS-6X-BTP - page 14

    Battery Pack for TPS-6X Crestron TPS-6X-BTP 6. Carefully turn the assembly over, returning it to its normal, face-up position. Then place the assembly into the rear half of the TPS-6X enclosure, hinging it so the top of the assembly is in place first (as shown in the illustration below). Then settle the bottom of the assembly into place and with yo ...

  • Crestron Battery Pack TPS-6X-BTP - page 15

    Crestron TPS-6X-BTP Battery Pack for TPS-6X 10. Re-connect power, slide the batte ry switch on the rear to the ON (up) position. Charging NOTE: A Nickel Metal Hydride (NiMH) battery typically provides 500 charge/discharge cycles. To charge the TPS-6X-BTP, install the TPS-6X-BTP in a TPS-6X touchpanel and mount the touchpane l on a powered TPS-6X-DS ...

  • Crestron Battery Pack TPS-6X-BTP - page 16

    Battery Pack for TPS-6X Crestron TPS-6X-BTP • If the batteries are cycled (charg ed and discharged), the storage capability will be restored up to 95% of its initial rated capacity after the second or third cycle. To prolong the life and maintain the performance of your NiMH batteries, Crestron recommends you follow these steps: • Practice FIFO ...

  • Crestron Battery Pack TPS-6X-BTP - page 17

    Crestron TPS-6X-BTP Battery Pack for TPS-6X Resources Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Cres ...

  • Crestron Battery Pack TPS-6X-BTP - page 18

    Battery Pack for TPS-6X Crestron TPS-6X-BTP Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for credit, exchange or service without prior authorization from CRESTR ON. To obtain warranty service for CRESTR ON products, contact an authorized CRESTRON dealer. On ly authorized CRESTRON deal ers may ...

  • Crestron Battery Pack TPS-6X-BTP - page 19

    Crestron TPS-6X-BTP Battery Pack for TPS-6X This page is intention ally left blank. Installation Guide – DOC. 6740C Battery Pack for TPS-6X: TPS-6X-BTP • 15 ...

  • Crestron Battery Pack TPS-6X-BTP - page 20

    Crestron Electronics, Inc. Inst allation Guide – DOC. 6740C 15 Volvo Drive Rockleigh, NJ 07647 (2022218) Tel: 888.CRESTRON 02.10 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice. ...

Manufacturer Crestron Category Battery Charger

Documents that we receive from a manufacturer of a Crestron Battery Pack TPS-6X-BTP can be divided into several groups. They are, among others:
- Crestron technical drawings
- Battery Pack TPS-6X-BTP manuals
- Crestron product data sheets
- information booklets
- or energy labels Crestron Battery Pack TPS-6X-BTP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Crestron Battery Pack TPS-6X-BTP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Crestron Battery Pack TPS-6X-BTP, service manual, brief instructions and user manuals Crestron Battery Pack TPS-6X-BTP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Crestron Battery Pack TPS-6X-BTP.

A complete manual for the device Crestron Battery Pack TPS-6X-BTP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Crestron Battery Pack TPS-6X-BTP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Crestron Battery Pack TPS-6X-BTP.

A complete Crestron manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Crestron Battery Pack TPS-6X-BTP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Crestron Battery Pack TPS-6X-BTP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Crestron Battery Pack TPS-6X-BTP, that we can find in the current document
3. Tips how to use the basic functions of the device Crestron Battery Pack TPS-6X-BTP - which should help us in our first steps of using Crestron Battery Pack TPS-6X-BTP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Crestron Battery Pack TPS-6X-BTP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Crestron Battery Pack TPS-6X-BTP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Crestron Battery Pack TPS-6X-BTP?

Use the form below

If you did not solve your problem by using a manual Crestron Battery Pack TPS-6X-BTP, ask a question using the form below. If a user had a similar problem with Crestron Battery Pack TPS-6X-BTP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)