English dropdown-ico

Manual Siemens IPC427C

170 pages 4.16 mb
Download

Go to site of 170

Summary
  • Siemens IPC427C - page 1

    SIMATIC Industrial PC SIMATIC IPC427C _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ Introduc ...

  • Siemens IPC427C - page 2

    Legal information Legal information Warning notice system This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property. The notices r eferring to your perso nal safe ty are highlighted in the manual by a sa fety alert symbol, notices referring only to property damage have no ...

  • Siemens IPC427C - page 3

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 3 Table of contents 1 Introduct ion ................................................. ............................................................... ................................ 7 1.1 Preface .................................................... ................................... ...

  • Siemens IPC427C - page 4

    Table of contents SIMATIC IPC427C 4 Operating Instructions, 04/2009, A5E02414743 -01 7 Commiss ioning ................................................ ............................................................... ......................... 37 7.1 Note before commissioning.................................. .......................................... ...

  • Siemens IPC427C - page 5

    Table of contents SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 5 11.2.2.2 Restoring the Software to Factory State Using the Rest ore DVD ............................................... 77 11.2.2.3 Setting up the operating system via the Recovery CD/DV D ....................................................... 79 11.3 Partitioni n ...

  • Siemens IPC427C - page 6

    Table of contents SIMATIC IPC427C 6 Operating Instructions, 04/2009, A5E02414743 -01 16.1.4.2 Compact Flash card interface .......................... ............................................................... .......... 111 16.1.4.3 PCI-104 or PC/104-P lus interface (PCI part) ........... ....................................................... ...

  • Siemens IPC427C - page 7

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 7 Introduction 1 1.1 Preface Objective of this documentation These operating instructions con tain all the information you n e ed for commissioning and operation of the SIMATIC IPC427C. It is intended both for programming and testing personnel who c ommission the device and connect it ...

  • Siemens IPC427C - page 8

    Introduction 1.2 Guideline to the Operating Instru ctions SIMATIC IPC427C 8 Operating Instructions, 04/2009, A5E02414743 -01 1.2 Guideline to the Operating Instructions Contents format T able of Contents Contents Organization of the doc umentation, including the index of pages and chapters Introduction Purpose, layout and description of the import ...

  • Siemens IPC427C - page 9

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 9 Safety Instructions 2 2.1 General safety instructions CAUTION Please observe the safety instr uctions on the back of the cover sheet of this documentation. You should not expand your de vice unless you have read the relevant safety instructions. This device is compliant with the rel ...

  • Siemens IPC427C - page 10

    Safety Instructions 2.1 General safety instructions SIMATIC IPC427C 10 Operating Instructions, 04/2009, A5E02414743-01 Battery This device is equipped with a Lithium battery. Batteri es may o nly be replaced by qualified personnel. CAUTION There is the risk of an explosio n if the battery is not replace d as directed. Replace the battery only with ...

  • Siemens IPC427C - page 11

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 11 Description 3 3.1 Overview The SIMATIC IPC427C provides high -level industrial p erformance. ● Compact design ● Maintenance-free operation ● High degree of ruggedne ss Figure 3-1 SIMATIC IPC427C ...

  • Siemens IPC427C - page 12

    Description 3.2 Applications SIMATIC IPC427C 12 Operating Instructions, 04/2009, A5E02414743-01 3.2 Applications The device provides industrial PC systems for hig h-performance and space-saving applications in particular in the field of machine, syste ms and switchgear cabinet engineering: ● Measuring and controlling of pro cess and machi ne data ...

  • Siemens IPC427C - page 13

    Description 3.3 Features SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 13 3.3 Features Basic data Installation / mounting • Installation on a DIN rail • Wall mounting • Vertical mountin • Hanging assembly Processor • Intel Celeron M 1.2 GHz , 800 MHz FSB, 1 MB SLC or • Intel Pentium Core 2 Solo 1.2 GHz, 800 MHz FSB, 3 ...

  • Siemens IPC427C - page 14

    Description 3.3 Features SIMATIC IPC427C 14 Operating Instructions, 04/2009, A5E02414743-01 Basic data Ports Serial COM1 (RS232) COM2 (RS232); optional Graphics DVI-I: combined DVI and VGA USB 4 x USB 2.0 high current Ethernet 2 x RJ 45 ( 10/100/1000 Mbps) PROFIBUS DP 12 Mbps (isolated potential, compatible to CP 5611), optiona l CAN interface Opti ...

  • Siemens IPC427C - page 15

    Description 3.4 Windows Embedded Standard 20 09 SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 15 3.4 Windows Embedded Standard 2009 The supplied Windows Embedd ed St andard has the product versi on 2009. The overview shows the basic devi ce functions under Windows Embedded Standar d 2009: Function Hard disk / SSD version Compact ...

  • Siemens IPC427C - page 16

    Description 3.4 Windows Embedded Standard 20 09 SIMATIC IPC427C 16 Operating Instructions, 04/2009, A5E02414743-01 Function Hard disk / SSD version Compact Flash card vers ion CoDevice Installer Available Available Windows Movie Maker Available V 2.1 Not available Media Player Available, V11.0 Available, V11.0 Windows Media Player Tour Available No ...

  • Siemens IPC427C - page 17

    Description 3.5 Design SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 17 3.5 Design 3.5.1 External Design Device components Pos Description ① Cover plate for Compact Flash modu le ② Connection elements    ③ Status displays ...

  • Siemens IPC427C - page 18

    Description 3.5 Design SIMATIC IPC427C 18 Operating Instructions, 04/2009, A5E02414743-01 3.5.2 Connection components Ports and power supply Location of connection elements (v ersion with PROFIBUS or CAN)          Pos Name Descriptio n ① 24 VDC Connection for a 24 V DC pow er supply ② DVI/VGA DVI/VGA connection for CR ...

  • Siemens IPC427C - page 19

    Description 3.5 Design SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 19 3.5.3 Operator controls On/Off switch CAUTION The On/Off switch does not di sconnect the devi ce from the suppl y voltage. Position of on/off swi tch Pos Description  ① The on/off switch turns o ff the output voltages of the power supply but not disconne ...

  • Siemens IPC427C - page 20

    Description 3.5 Design SIMATIC IPC427C 20 Operating Instructions, 04/2009, A5E02414743-01 3.5.4 Status displays Status displays LED Meaning LE D Description PWR Power supply OFF GREEN Standby mode Supply voltage available WD Watchdog status display OFF GREEN RED Watchdog disabled Watchdog enabled, monitoring time not expired Watchdog enabled, monit ...

  • Siemens IPC427C - page 21

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 21 Application planning 4 4.1 Transport Despite the device' s rugged design, its internal com ponents are sensitive to severe vibrations or shock. You must t herefore protect the device from severe mechani cal stress when transporting it. You should always use the original packag ...

  • Siemens IPC427C - page 22

    Application planning 4.2 Unpacking and checking the deli very unit SIMATIC IPC427C 22 Operating Instructions, 04/2009, A5E02414743-01 4.2 Unpacking and checking the delivery unit Unpacking the device Note the following when unpacking the unit: ● It is advisable not to dispose of t he original pack ing material . Keep it in case you have to transp ...

  • Siemens IPC427C - page 23

    Application planning 4.2 Unpacking and checking the deli very unit SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 23 ● Ethernet address: The Ethernet address of the device is availab le in your BIOS Setup (F2 function key) under Main > Hardw are Options > Ethernet 1 Address or Ethernet 2 Address . ● Microsoft Windows &qu ...

  • Siemens IPC427C - page 24

    Application planning 4.3 Ambient and Environmental Condi tions SIMATIC IPC427C 24 Operating Instructions, 04/2009, A5E02414743-01 4.3 Ambient and Environmental Conditions When you plan your project, you should make allowances for: ● The climatic and mecha nical environmental conditions spe cified in the specifications given in your operating in s ...

  • Siemens IPC427C - page 25

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 25 Installing/mounting 5 5.1 Permitted mounting positions NOTICE The device is approved for operation in closed rooms only. Ensure that there is a minimum cleara nce to the other component s or the walls of a housing: • Below at least 100 mm • Above at least 50 mm Horizontal (pr e ...

  • Siemens IPC427C - page 26

    Installing/mounting 5.1 Permitted mounting positions SIMATIC IPC427C 26 Operating Instructions, 04/2009, A5E02414743-01 Suspended Operation with CompactFlash card and/or SSD drive and without expansion modules: 0 to +40°C Note : Mounting brackets are required if the device is suspended. Upright mounting P ermitted temperatures Operation wit h hard ...

  • Siemens IPC427C - page 27

    Installing/mounting 5.2 Mounting information SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 27 5.2 Mounting information Before you install the device, r ead the following mounting inst ructions. NOTICE Adhere to the SIMATIC assembly guidelines and the relevant DIN/ VDE requirements or the country-specific regul ations when mountin ...

  • Siemens IPC427C - page 28

    Installing/mounting 5.4 Mounting on DIN rails SIMATIC IPC427C 28 Operating Instructions, 04/2009, A5E02414743-01 5.4 Mounting on DIN rails Mounting the device on DIN rails Note Use of Siemens 35 mm standard mounting rail is re commended. Steps for mounti ng on DIN rails 1. Set the device inclined on the upper DIN rail. 2. Swing the device fully ont ...

  • Siemens IPC427C - page 29

    Installing/mounting 5.4 Mounting on DIN rails SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 29 NOTICE The rails are secured to a wall or cabine t similar to mounting with mounting brackets. Ensure that the wall or ceiling ca n hold four time s the total w eight of the device (including the rails and additional expansi on mod ules ...

  • Siemens IPC427C - page 30

    Installing/mounting 5.5 Mounting with mounting brackets SIMATIC IPC427C 30 Operating Instructions, 04/2009, A5E02414743-01 5.5 Mounting with mounting brackets Removing mounting clamps from the device Two mounting clamps are factory installed on the device for DIN rail mounting. These need to be removed before mounting the mou nting brackets. Steps ...

  • Siemens IPC427C - page 31

    Installing/mounting 5.5 Mounting with mounting brackets SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 31 Mounting/demounting the device The dimensions of the devi ce with mounting brackets are liste d under Dimension d rawings of the device with mounting brackets (Page 99). Mounting exam ples Material Bore diameter Mounting Concr ...

  • Siemens IPC427C - page 32

    Installing/mounting 5.6 Upright mounting SIMATIC IPC427C 32 Operating Instructions, 04/2009, A5E02414743-01 5.6 Upright mounting With the available optional vertical mounting kit you h ave the possibility to implement a place saving installation. Mounting the vertical mounting bracket onto the device     ① Device ② Screws ③ Vertic ...

  • Siemens IPC427C - page 33

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 33 Connecting 6 6.1 Connecting peripheral equipment NOTICE Connect only perip heral devices approved for industri al applica tions conforming to EN 61000-6-2 / IEC 61000-6-2. Note Hot-plug peripherals (USB) may be connected whil e the PC is in operation. CAUTION Peripheral devices tha ...

  • Siemens IPC427C - page 34

    Connectin g 6.2 Connecting the 24 V DC power supply SIMATIC IPC427C 34 Operating Instructions, 04/2009, A5E02414743-01 6.2 Connecting the 24 V DC power supply To be noted before you connect the device Note the following in order to operate th e device safely and ac cording to regulation: WARNING The device should only be conn ecte d to a 24V DC pow ...

  • Siemens IPC427C - page 35

    Connectin g 6.3 Protective ground co nnection SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 35 6.3 Protective ground connection The PE terminal (M4 thread) on t he device (large surface, large -area co ntact) must be connected to the PE conductor on the cabinet or system in which the PC is to be installed. The conductor cross-sec ...

  • Siemens IPC427C - page 36

    Connectin g 6.4 USB strain-relief SIMATIC IPC427C 36 Operating Instructions, 04/2009, A5E02414743-01 6.4 USB strain-relief The USB strain-relief provided as an accessory is u sed to preve nt accidental loosening of the USB cable from the device. A cable binder (not includ ed in the package) is neede d to use this accessory . To fix the USB strain r ...

  • Siemens IPC427C - page 37

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 37 Commissioning 7 7.1 Note before commissioning Factory state The SIMATIC IPC427C is availabl e in the followi ng versions: ● With the Windows Embedded Standard 2009 operati ng system (pre-i nstalled on CompactFlash card, SSD d rive or the hard disk) ● With the Windows XP Profess ...

  • Siemens IPC427C - page 38

    Commissioning 7.2 Commissioning - Wind ows Embed ded Standard 2009 SIMATIC IPC427C 38 Operating Instructions, 04/2009, A5E02414743-01 7.2 Commissioning - Windows Embedded Standard 2009 7.2.1 Basic commissioning - initial startup Requirements ● The device is connected to the 24 VDC power supply. ● Equipotential bonding is connected. ● The cabl ...

  • Siemens IPC427C - page 39

    Commissioning 7.2 Commissioning - Wind ows Embedded Standard 2009 SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 39 Switch off the device When you work with W indows Embedded Standar d , always shut down the PC with the command Start > Shut Down . Note The Enhanced Write Filter shoul d be enabled followin g the insta llation of ...

  • Siemens IPC427C - page 40

    Commissioning 7.3 Commissioning - Wi nd ows XP Professional SIMATIC IPC427C 40 Operating Instructions, 04/2009, A5E02414743-01 7.3 Commissioning - Windows XP Professional 7.3.1 Basic commissioning - initial startup Requirements ● The device is connected to the 24 VDC power supply. ● Equipotential bonding is connected. ● The cables are correct ...

  • Siemens IPC427C - page 41

    Commissioning 7.3 Commissioning - Wind ows XP Professional SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 41 Switch off the device When you w ork with W indows XP Pr ofessional, always shut down th e PC with the command Start > Shut Down . You can then switch off the device with the power switch or b y disconnecting the power s ...

  • Siemens IPC427C - page 42

    Commissioning 7.4 Commissioning - ot her operating systems SIMATIC IPC427C 42 Operating Instructions, 04/2009, A5E02414743-01 7.4 Commissioning - other operating systems 7.4.1 Commissioning - guide The desired operating system c an be installed on the hard disk, CompactFlash card or SSD drive. A variety of USB devices ( hard disk, external floppy o ...

  • Siemens IPC427C - page 43

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 43 Integration into an Automation System 8 8.1 Overview Options of integration in existing or planned system environm en ts/networks: Ethernet The integrated Ethernet port (10/ 100/1000 Mbps) can also be use d for communication a nd for data exchange with aut omation devices such a s ...

  • Siemens IPC427C - page 44

    Integration into an Automation System 8.1 Overview SIMATIC IPC427C 44 Operating Instructions, 04/2009, A5E02414743-01 ...

  • Siemens IPC427C - page 45

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 45 Functions 9 9.1 Monitoring Functions 9.1.1 Introduction Even in its basic version, the device com es with optional monit oring functions. When used in combination with the appropriate software, the following functi ons for dis playing, monitoring and controlling are availabl e: ● ...

  • Siemens IPC427C - page 46

    Functions 9.1 Monitoring Functions SIMATIC IPC427C 46 Operating Instructions, 04/2009, A5E02414743-01 9.1.2 Temperature monitoring/display Temperature monitoring The temperature is recorded by means of three thermocouples. Th e sensors monitor the processor temperatur e, the temperature near the RAM module and the motherboard around the DVI/VGA soc ...

  • Siemens IPC427C - page 47

    Functions 9.1 Monitoring Functions SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 47 9.1.3 Watchdog (WD) Function If the user program does not res pond to the watchdog within the predetermined monitoring time, the watchdog monitors the program pro cess and informs the user about various reactions. After POWER ON of the device or a ...

  • Siemens IPC427C - page 48

    Functions 9.2 Enhanced Write Filter (EWF) SIMATIC IPC427C 48 Operating Instructions, 04/2009, A5E02414743-01 9.2 Enhanced Write Filter (EWF) Purpose and function The EWF (Enhanced Write Filter) is a function that is only avai lable with Windows Embedded operatin g systems. It provides write protection that c an be configured by the user. The Enhanc ...

  • Siemens IPC427C - page 49

    Functions 9.2 Enhanced Write Filter (EWF) SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 49 Special features for the use of Enhanced Write Filters (EWF) ● In the event of a power failure , if the EWF is enabled changes made after the boot sequence on drive C: are lost. To prevent data loss in the ev ent of a power failure, the u ...

  • Siemens IPC427C - page 50

    Functions 9.3 File Based Write Filter (FBWF) SIMATIC IPC427C 50 Operating Instructions, 04/2009, A5E02414743-01 9.3 File Based Write Filter (FBWF) Purpose and function With the Feature Pack 2007 for Windows XP Embedded, Microsoft i ntroduced a second write filter, File Based Write Filter (FBWF). In contrast to EWF, which protect s partitions based ...

  • Siemens IPC427C - page 51

    Functions 9.3 File Based Write Filter (FBWF) SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 51 Function Command Display the current FBWF status fbwfmgr /displayconfig Enable FBWF after the next startup fbwfmgr /enable Write to protected files fbwfmgr /commit c: Test.txt Adding/removing elements in the exception list: • Add file ...

  • Siemens IPC427C - page 52

    Functions 9.4 SRAM buffer memory SIMATIC IPC427C 52 Operating Instructions, 04/2009, A5E02414743-01 9.4 SRAM buffer memory For applications to be able to s tore data following a power fai lure, the motherboard features a battery-buffered CMOS-RAM. If t he supply voltage fails longer than 5 ms, this is indicated by the DC FAIL signal. Enough time is ...

  • Siemens IPC427C - page 53

    Functions 9.5 Battery monitoring SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 53 9.5 Battery monitoring The installed buffer battery has a service life of at least 5 y ears. The status can be checked with two-tier battery monitoring . The information can be read f rom an I/O register and evaluated. When the first warning level i ...

  • Siemens IPC427C - page 54

    Functions 9.6 Operation without monitor and keyboard SIMATIC IPC427C 54 Operating Instructions, 04/2009, A5E02414743-01 9.6 Operation without monitor and keyboard The device can be operated withou t a monitor and keyboard. The device startup is guaranteed without these peripherals. A USB keyboard and mouse and an analog CRT monitor can be later con ...

  • Siemens IPC427C - page 55

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 55 Expansions and Configurations 10 10.1 Open the device (front panel) CAUTION Work on the open devi ce may onl y be carried out by authori zed a nd qualified personnel. Within the warranty time, you are only allowed to install expan sions for memory and expansion card mod ules. CAUTI ...

  • Siemens IPC427C - page 56

    Expansions and Configurations 10.1 Open the device (fron t panel) SIMATIC IPC427C 56 Operating Instructions, 04/2009, A5E02414743-01 Open the device Steps in openi ng the device (front panel) 1 Remove the six screws. 2 Remove the front panel. ...

  • Siemens IPC427C - page 57

    Expansions and Co nfigurations 10.2 Memory expan sion SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 57 10.2 Memory expansion 10.2.1 Installing the memory module Memory expansion options The motherboard is equipped with one slot for an SO-DIMM DDR3 m emory module. This lets you expand the memory capaci ty of your device to a maxim ...

  • Siemens IPC427C - page 58

    Expansions and Configurations 10.2 Memory expan sion SIMATIC IPC427C 58 Operating Instructions, 04/2009, A5E02414743-01 Installing a memory module How to install a memory module 1 Set the memory module in the mount tilting forward. 2 Carefully push the memory modu le back into the heat sink until it fully engages. 3 Close the device. Display of the ...

  • Siemens IPC427C - page 59

    Expansions and Co nfigurations 10.3 Installing PCI-10 4 / PC/104 Plus modules SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 59 10.3 Installing PCI-104 / PC/104 Plus modules 10.3.1 Notes on the modules Notes on module specifications The device is designed for use with modules conforming to spe ci fications of the PC/104 Consortium ...

  • Siemens IPC427C - page 60

    Expansions and Configurations 10.3 Installing PCI-10 4 / PC/104 Plus modules SIMATIC IPC427C 60 Operating Instructions, 04/2009, A5E02414743-01 10.3.2 Mounting PCI-104 or PC/104 Plus modules Tools Use hexagon head screws (5 mm) to mount the spacing bolts of th e PCI-104- or PC/104- Plus module. If this is the only PCI-104 or PC/104- Plus module you ...

  • Siemens IPC427C - page 61

    Expansions and Co nfigurations 10.3 Installing -104 / PC/104 Plus modules SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 61 Steps for mountin g an expan sion module 3 Secure the module with four screws or spacing bolts. 4 Mount the expansion frame ② and secure it with six spacing bolts. Mount the slot plates ③.    5 M ...

  • Siemens IPC427C - page 62

    Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 62 Operating Instructions, 04/2009, A5E02414743-01 10.4 Installing/Removing Compact Flash Cards 10.4.1 Installation options fo r Compact Flash cards Memory expansion options The device features an accessib le slot for Compact Flash cards (types I / II). As an ...

  • Siemens IPC427C - page 63

    Expansions and Co nfigurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 63 10.4.2 Installing/removing an accessible Compact Flash card Preparation Disconnect the device from the power supply. CAUTION The electronic component s on the PCBs are highly sensitive to electrostatic disc ...

  • Siemens IPC427C - page 64

    Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 64 Operating Instructions, 04/2009, A5E02414743-01 Installing the Compact Flash card Steps for installing a Compact Flash card 1 Open the module receptacle. 2 Insert the CompactFlash card with the connector facing in until it locks into place ①.  3 Close ...

  • Siemens IPC427C - page 65

    Expansions and Co nfigurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 65 Removing the Compact Flash card Steps for removing a Com pact Flash card 1 Open the module receptacle. 2 Press the eject button ① and remove the CompactFlash card.  3 Close the module receptacle again. ...

  • Siemens IPC427C - page 66

    Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 66 Operating Instructions, 04/2009, A5E02414743-01 10.4.3 Installing/removing a built-in Compact Flash card Steps for removing a built-i n Compact Flash card 1 Remove the four screws of the cover plate and remove it 2 Press the eject button ① and carefully ...

  • Siemens IPC427C - page 67

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 67 Maintenance and Service 11 11.1 Removing and Installing Hardware Components 11.1.1 Repairs Carrying out repairs Only authorized personnel are permitted to repair the device. WARNING Unauthorized opening and improper re pairs on the device may res ult in substan tial damage to equip ...

  • Siemens IPC427C - page 68

    Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 68 Operating Instructions, 04/2009, A5E02414743-01 Tools ● Torx T8 (cover and upper sheet metal cover) ● Torx T10 (hard disk mounting) ● Torx T20 (Protective earth terminal) ● Hexagon head 5mm (spa cing bolts PC/104) 11.1.2 Preventive maintenance To ma ...

  • Siemens IPC427C - page 69

    Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 69 11.1.3 Replacing hard di sk or SSD drive CAUTION Drives may only be replaced by a uthorized qualified personnel. Tools You will need size TORX T8 and T10 screwdrivers to mount the ha rd disk and a 5mm Allen w ...

  • Siemens IPC427C - page 70

    Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 70 Operating Instructions, 04/2009, A5E02414743-01 How to remove a drive 2 Remove the four screws holding the drive to the back of the enclosure. 3 Carefully remove the drive from the enclosure. 4 Take the drive out of the holder. Installing a drive Carry out ...

  • Siemens IPC427C - page 71

    Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 71 11.1.4 Replace the backup battery To be noted before you replace the battery Note The service life of a backup batte ry is approximately 5 - 8 ye a rs, depending on the operating conditions. CAUTION Risk of d ...

  • Siemens IPC427C - page 72

    Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 72 Operating Instructions, 04/2009, A5E02414743-01 Replacing the battery Proceed as follows: Steps for replacing the battery 1 Open the battery compartment. 2 Remove the battery holder. 3 Pull out the battery plug ①.  4 Take the old battery out of the hol ...

  • Siemens IPC427C - page 73

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 73 11.2 Reinstalling the operating system 11.2.1 Windows Embedded Standard 2009 11.2.1.1 General installation procedure If your software becomes corrup t for any reason, you c an reinst all it from the Restore CD/ DVD. Th ...

  • Siemens IPC427C - page 74

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 74 Operating Instructions, 04/2009, A5E02414743-01 11.2.1.2 Restoring the software to factory state using the Restore DVD You can restore the origin al fact ory software using the Restore CD/DVD. The CD/DVD contains the necessary im ages and tools for transferring the f ...

  • Siemens IPC427C - page 75

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 75 4. Close the BIOS setup with the "Exit Saving Changes" entry. 5. Follow the on-screen instruction s. CAUTION All existing data, programs, user settings and authorizations or license keys will be deleted from ...

  • Siemens IPC427C - page 76

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 76 Operating Instructions, 04/2009, A5E02414743-01 11.2.2 Windows XP Professional 11.2.2.1 General installation procedure If your software becomes corrupt fo r any reason, y ou have two p ossibilities: ● Restoring the factory state of the software by means of the Res ...

  • Siemens IPC427C - page 77

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 77 11.2.2.2 Restoring the Software to Factory State Using the Restore DVD You can reinstall the original factory software (included in th e Windows XP Professional product package) using the Restor e DV D. The DVD contain ...

  • Siemens IPC427C - page 78

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 78 Operating Instructions, 04/2009, A5E02414743-01 Setting up the language selection for Windows XP Professional / Embedded Standard The M ultilanguage U se r I nterface (MUI) allows you to set up the Wi ndows XP Professional / Embedded Standard menus and dialog s for a ...

  • Siemens IPC427C - page 79

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 79 11.2.2.3 Setting up the operating system via the Recovery CD/DVD Use the supplied Reco very CD/ DV D to install Windows to suit you r particular requirements. You also need the included Docume ntation and Drivers CD. N ...

  • Siemens IPC427C - page 80

    Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 80 Operating Instructions, 04/2009, A5E02414743-01 Installation of the operating system Follow the on-screen instructions when the "Windows XP Professi onal Setup" window appears. Note Note that there must still be free space on the drive after the selected re ...

  • Siemens IPC427C - page 81

    Maintenance and Service 11.3 Partitioning data media SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 81 11.3 Partitioning data media 11.3.1 Setting up the partitions under W indows Embedded Standard 2009 You need to set up the partitions on the CompactFlash card afte r installing a new drive, to repair corrupt partitions or to chan ...

  • Siemens IPC427C - page 82

    Maintenance and Service 11.3 Partitioning data media SIMATIC IPC427C 82 Operating Instructions, 04/2009, A5E02414743-01 11.3.2 Setting up the partitions un der Windows XP Pr ofessional You need to set up the partitions on the CompactFlash card afte r installing a new drive, to repair corrupt partitions or to change the partitioning. Partitioning th ...

  • Siemens IPC427C - page 83

    Maintenance and Service 11.4 Installing drivers and software SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 83 11.4 Installing drivers and software 11.4.1 Driver installation under Win dows Embedded Standard 2009 The driver installation under Windows Embedd ed Standard 2009 is conducted in the same way as under Windows XP Professi ...

  • Siemens IPC427C - page 84

    Maintenance and Service 11.5 Installing updates SIMATIC IPC427C 84 Operating Instructions, 04/2009, A5E02414743-01 11.5 Installing updates 11.5.1 Updating the operating system Windows The latest updates for the Window s operating system are availab le on the Internet at Microsoft Side Guide ( http://www.microsoft.com ). NOTICE Before you install ne ...

  • Siemens IPC427C - page 85

    Maintenance and Service 11.5 Installing updates SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 85 11.5.3 Performing a BIOS update Download from BIOS update Check regularly if updates are available for download to your d evice. You can find the downloads in the Intern et ( http://www.s iemens.com/asis ) in the "Support" t ...

  • Siemens IPC427C - page 86

    Maintenance and Service 11.6 Data backup SIMATIC IPC427C 86 Operating Instructions, 04/2009, A5E02414743-01 11.6 Data backup 11.6.1 Creating an image Data backup under Windows Embedded Standard 2009 / Windows XP P rofessional To back up data unde r Windows Embedded Standard 2009 / Windows XP Professional, we recommend the software tool SIMATIC PC/P ...

  • Siemens IPC427C - page 87

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 87 Alarm, error and system messages 12 12.1 Boot error messages During startup (the boot process ), the BIOS first performs a P ower O n S elf T est (POST) and checks whether certain functional units of the PC are operating error-free. The boot sequence is immediatel y interr upted if ...

  • Siemens IPC427C - page 88

    Alarm, error and system messages 12.1 Boot error messages SIMATIC IPC427C 88 Operating Instructions, 04/2009, A5E02414743-01 ...

  • Siemens IPC427C - page 89

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 89 Troubleshooting/FAQs 13 13.1 General problems This chapter provide s you with ti ps on how to locate and troubl eshoot common probl ems. Problem Possible cause To correct or avoid error The device is not operational. There is no power supply to the device. Check if the power s witc ...

  • Siemens IPC427C - page 90

    Troubleshooting/FAQs 13.2 Problems when using modules of third-party manufacturers SIMATIC IPC427C 90 Operating Instructions, 04/2009, A5E02414743-01 13.2 Problems when using modules of third-party manufacturers Problem Possible cause To correct or avoid error Check your computer configuration: • If the computer configur ation corresponds wit h f ...

  • Siemens IPC427C - page 91

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 91 Technical specifications 14 14.1 General specifications General specifications Order numbers see the order documents Dimensions 262x142x47 ( WxHxD in mm) Weight Approximately 2 kg Supply voltage (DC) 24 VDC 1 (19.2 to 28.8 V) Brief power failure according to Namur min. 15 ms (at 20 ...

  • Siemens IPC427C - page 92

    Technical specifications 14.1 General specifications SIMATIC IPC427C 92 Operating Instructions, 04/2009, A5E02414743-01 General specifications Climatic Conditi ons Temperature Tested a ccording to IEC 60068 -2-1, IEC 60068-2-2, IEC 60068-2-14 - Operation Horizontal mo unting positio n: Operation wit h hard d isk: • with up to 3 expansion modul es ...

  • Siemens IPC427C - page 93

    Technical specifications 14.1 General specifications SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 93 General specifications Mech. Ambient conditions Vibration Tested to DIN IEC 60068-2-6 - Operation with CompactFlash c ard 5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s2 with hard disk and wall i nstalla tion: 10 to 58 Hz: 0.0375 mm; 5 ...

  • Siemens IPC427C - page 94

    Technical specifications 14.1 General specifications SIMATIC IPC427C 94 Operating Instructions, 04/2009, A5E02414743-01 General specifications Ports COM1; COM2 (optional) RS232 , max. 115 Kbps., 9-pin Cannon, ma le VGA/DVI VGA integrated in the DVI-I Keyboard USB support Mouse USB support USB 4x USB 2.0 high-s peed / high current PROFIBUS / MPI int ...

  • Siemens IPC427C - page 95

    Technical specifications 14.2 Power requireme nts of the components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 95 14.2 Power requirements of the components Maximum power consumption of the auxiliary components Auxiliary components Maximum permitted power consumption Max. total power +5 V +3.3 V +12 V -12 V USB device High curr ...

  • Siemens IPC427C - page 96

    Technical specifications 14.3 Integrated DC power sup ply SIMATIC IPC427C 96 Operating Instructions, 04/2009, A5E02414743-01 14.3 Integrated DC power supply Technical specifications Input voltage 24 VDC (1 9.2 to 28.8 VDC) Power consumption 1) max. 72 W Power failure buffering Hold-up time > 15 ms (after > 5 ms DC_FAIL becomes active) Maximum ...

  • Siemens IPC427C - page 97

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 97 Dimension drawings 15 15.1 Overview of the dimensional drawings This section contains the following dimension dra wings: ● Dimension drawings of the device (Page 98) ● Dimension drawings of the device with mounting brackets (Page 99) ● Dimensional drawing s of the device with ...

  • Siemens IPC427C - page 98

    Dimension drawings 15.2 Dimension drawings of the device SIMATIC IPC427C 98 Operating Instructions, 04/2009, A5E02414743-01 15.2 Dimension drawings of the device     Figure 15-1 Dimensio nal drawing of the device: Front view          ? ...

  • Siemens IPC427C - page 99

    Dimension drawings 15.3 Dimension drawings of the device with mounting brackets SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 99 15.3 Dimension drawings of the device with mounting brackets                       ? ...

  • Siemens IPC427C - page 100

    Dimension drawings 15.3 Dimension drawings of the device with mounting brackets SIMATIC IPC427C 100 Operating Instructions, 04/2009, A5E02414743-01      Figure 15-4 Dimensio nal drawing o f the de vice with mounting brack ets Side view ...

  • Siemens IPC427C - page 101

    Dimension drawings 15.4 Dimensional drawings of t he device with vertical mounting angles SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 101 15.4 Dimensional drawings of the device with vertical mounting angle s           ...

  • Siemens IPC427C - page 102

    Dimension drawings 15.5 Dimensional drawings of the device with expansion frames SIMATIC IPC427C 102 Operating Instructions, 04/2009, A5E02414743-01 15.5 Dimensional drawings of the device with expansion frames                ? ...

  • Siemens IPC427C - page 103

    Dimension drawings 15.6 Dimension drawing of the blanki ng plate SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 103 15.6 Dimension drawing of the blanking plate                       ...

  • Siemens IPC427C - page 104

    Dimension drawings 15.6 Dimension drawing of the blanki ng plate SIMATIC IPC427C 104 Operating Instructions, 04/2009, A5E02414743-01 ...

  • Siemens IPC427C - page 105

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 105 Detailed descriptions 16 16.1 Internal components 16.1.1 Overview of internal components The basic com ponents of the device are ● the motherboard with processor, chipset, one slot for a RAM mod ule, internal and external ports, ● a DC/DC converter for the power suppl y of the ...

  • Siemens IPC427C - page 106

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C 106 Operating Instructions, 04/2009, A5E02414743-01 16.1.2 Technical features of the motherboard Component / port Description Param eters Chipset Intel GM45+ICH-9m BIOS Insyde H20... CPU Intel Celeron M Inter Pentium Core 2 Solo Intel Pentium Core 2 Duo 1.2 GHz, 1 MB SLC 1.2 GHz, 3 MB S ...

  • Siemens IPC427C - page 107

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 107 16.1.3 External ports 16.1.3.1 Overview Port Position De scription COM1; COM2 (optional) externa l 9-pin male V24 USB external Four USB channels 4 x high current USB 1.1 USB 2.0 PROFIBUS /MPI /DP12(optional ) external 9 -pin female CA ...

  • Siemens IPC427C - page 108

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C 108 Operating Instructions, 04/2009, A5E02414743-01 16.1.3.3 DVI-I DV-I port, standard socket Pin no. Short description Descrip tion 1 TMDS Data2- DVI data channel (O) 2 TMDS Data2+ DVI data cha nnel (O) 3 TMDS Data2/4 shield Cable shield 4 NC* 5 NC 6 DDC clock (SCL) Display data channe ...

  • Siemens IPC427C - page 109

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 109 16.1.3.4 Ethernet Ethernet RJ45 connection   /(' /(' Pin no. Short description Descriptio n Input / output 1 BI_DA+ Bi-directional data A+ Input/output 2 BI_DA- Bi-directional data A- Input/output 3 BI_DB+ ...

  • Siemens IPC427C - page 110

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C 110 Operating Instructions, 04/2009, A5E02414743-01 16.1.3.6 PROFIBUS PROFIBUS interface , 9-pin (socket) Pin no. Short description Descrip tion 1-2 NC Not connected 3 LTG_B Data line (I/O) 4 RTS_AS Turn on PLC transmitter (O) 5 GND Ground isolat ed 6 P5V_dp_fused +5 V (fused) isolated ...

  • Siemens IPC427C - page 111

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 111 16.1.4 Internal ports 16.1.4.1 Overview Port Po sition Connector Description Compact Flash card (True IDE mode) Internal X3 50-pin CF socket, types I / II PCI -104 Internal PCI interface 16.1.4.2 Compact Flash card interface Compact F ...

  • Siemens IPC427C - page 112

    Detailed descriptions 16.1 Internal components SIMATIC IPC427C 112 Operating Instructions, 04/2009, A5E02414743-01 16.1.4.3 PCI-104 or PC/104-Plus interface (PCI part) PCI-104 or PCI part of the PC /104-Plus interface, X7 Pin no. O B C D 1 GND Reserv ed +5 AD00 2 VI/O 5V AD02 AD01 +5V 3 AD05 GND AD04 AD03 4 C/BE0# AD07 GND AD06 5 GND AD09 AD08 GND ...

  • Siemens IPC427C - page 113

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 113 16.2 BIOS Setup 16.2.1 Overview BIOS Setup program BIOS Setup program is stored in ROM BIOS. System configuration data are stored in battery-backed RAM of the device. SETUP can be used to define the hardware configuration (for exa mple, the ha ...

  • Siemens IPC427C - page 114

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 114 Operating Instructions, 04/2009, A5E02414743-01 16.2.2 Starting BIOS Setup Starting BIOS Setup Start the setup program as follows: 1. Reset the device (warm or cold restart). In the figures shown, the default settings differ based on the device versions. With the default setting of your devi ...

  • Siemens IPC427C - page 115

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 115 16.2.3 BIOS Setup menus The various menu s and submenus a re listed on the next pages. Yo u can obtain information on the selected SETUP item from t he "Item-specific help" part o f the respective menu.      Figure 16- ...

  • Siemens IPC427C - page 116

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 116 Operating Instructions, 04/2009, A5E02414743-01 Menu layout The screen is divided into four s ections. In the top section ②, you can select the subm enus [Main] [Advanced] [Security] [Boot] [Version] [Exit]. Yo u can s elect various settings or submenus in the left middle secti on ③. Sho ...

  • Siemens IPC427C - page 117

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 117 16.2.4 Main menu Figure 16-3 Main menu Settings in the main menu In the main menu, you can move up and down to select the follow ing system configuration boxes by means of the [↑] up and [↓] down cursor keys: Field Meaning System Time For ...

  • Siemens IPC427C - page 118

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 118 Operating Instructions, 04/2009, A5E02414743-01 System time and date System Time and System Date indi cate the current va lues. Once y ou have selected the appropriate option, you ca n use the [+] and [-] k eys to modify the time setting Hour: Minute: Second and for the date Month/Day/Year . ...

  • Siemens IPC427C - page 119

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 119 "Boot Options" submenu Figure 16-5 "Boo t Options" submenu Quick Boot Mode Some hardware tests are skipped to speed up the bo ot sequence. The boot sequence is stopped if an error is det ected duri ng boo ting; you must pre ...

  • Siemens IPC427C - page 120

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 120 Operating Instructions, 04/2009, A5E02414743-01 "Keyboard Features" submenu Figure 16-6 "Keyboard Fea tures" submenu On Numlock Off Switches Numlock on or o ff following power on. ...

  • Siemens IPC427C - page 121

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 121 "Hardware Options" submenu Figure 16-7 "Hardware Options" fiel d The parameters of the interfaces p resent on the motherboard are set here. Entry Meaning Enabled Sharing the MPI/DP interf ace. The resources are managed by t ...

  • Siemens IPC427C - page 122

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 122 Operating Instructions, 04/2009, A5E02414743-01 16.2.5 Advanced Menu Menu layout Figure 16-8 Advanced Me nu Settings in the Advanced Menu Disabled High Precision Event Timer is disable d HPET - HPET support Enabled High Precision Event T imer is enabled Disabled Disables Legacy Universal Ser ...

  • Siemens IPC427C - page 123

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 123 "IO Device Configuration" submenu Figure 16-9 "IO Device Co nfiguration" submenu Disabled COM 1 or COM 2 is always disable d. Auto BIOS switches on the CO M. Resources are a ssigned in the OS per reconfiguration. Internal C ...

  • Siemens IPC427C - page 124

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 124 Operating Instructions, 04/2009, A5E02414743-01 "SATA Configuration" submenu Figure 16-10 "SATA Configuration" submen u SATA Controller [Enabled] [Disabled] Disables or enables t he SATA controller [Enhanced] Serial ATA Por ts 0/1 work in Legacy Mode. Serial ATA Ports 4/5 ...

  • Siemens IPC427C - page 125

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 125 16.2.6 Security menu You can only edit the fields enc losed in square brackets. Two p asswords can be assi gned to protect your PC from unauthori z ed use. The Supervisor password can be used to restrict access to the hard disks. Figure 16-11 ...

  • Siemens IPC427C - page 126

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 126 Operating Instructions, 04/2009, A5E02414743-01 16.2.7 Boot menu This menu allows you to assign a priority for the boot devices. Figure 16-12 "Boot" menu ...

  • Siemens IPC427C - page 127

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 127 Legacy Specifies the boot sequence for boot devices with Leg acy operat ing system s. Figure 16-13 "Legacy" submenu ...

  • Siemens IPC427C - page 128

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 128 Operating Instructions, 04/2009, A5E02414743-01 Figure 16-14 "Boot Type Order" field This screen shows all possibl e legacy boot ty pes. The boot type with highest boot priority is shown at the top. To change the sequen ce: Select the boot source with the ↑↓ keys, move to the d ...

  • Siemens IPC427C - page 129

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 129 Note You can open the Boot menu and select the boot volume by pressi ng the ESC key during system st artup. ...

  • Siemens IPC427C - page 130

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 130 Operating Instructions, 04/2009, A5E02414743-01 16.2.8 Version menu Keep this information at hand i f customer support has t echnical questions about your system. Figure 16-15 Version menu (example) ...

  • Siemens IPC427C - page 131

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 131 16.2.9 Exit Menu You always exit BIOS Setup in this menu. Figure 16-16 Exit menu Exit Saving Changes All cha nges a re saved and the system is res tarted with the new parameters. Exit Discarding Changes All cha nges are discarded an d the syst ...

  • Siemens IPC427C - page 132

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 132 Operating Instructions, 04/2009, A5E02414743-01 16.2.10 Default BIOS Setup entries Documenting your device configuration If you have changed any default settings in Setup, you can ente r them in the following table. You can then refer to these entri es for any future hardware mod ifications. ...

  • Siemens IPC427C - page 133

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 133 Hardware Options On-board Ethernet 2 Enabled Ethernet 2 Address 00.0E.8C.xxxxxx Ethernet 2 Remote Boot Disabled Dual view DVI/CRT Disabled 1) Only for models with PROFIBUS 2) Only with models with CAN bus Advanced HPET - HPET support Enabled L ...

  • Siemens IPC427C - page 134

    Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 134 Operating Instructions, 04/2009, A5E02414743-01 Version SIMATIC PC IPC427C PROFIBUS BIOS Version V12.01.xx BIOS Number A5E02316088-ES0xx InsideH20 Version Mont evina.03.56.37.20xx MPI / DP Firmware ID xx FPGA Revision ID xx Processor Type Intel® Core™2 Duo CPU U9300 @ 1.20GHz CPU ID 00676 ...

  • Siemens IPC427C - page 135

    Detailed descriptions 16.3 System resources SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 135 16.3 System resources 16.3.1 Currently allocated system resources All system re sources (ha rdware addre sses, memo ry configurat ion, allocation of interrupts, DMA channels) a re assigned dynamic ally by the Wind ows OS, depen ding on t ...

  • Siemens IPC427C - page 136

    Detailed descriptions 16.3 System resources SIMATIC IPC427C 136 Operating Instructions, 04/2009, A5E02414743-01 16.3.2 System resources used by the BIOS/DOS The following tables and picture s describe the system resources for the factory state of the device. 16.3.2.1 PCI Interrupt Lines The interrupts are assigne d to devices by BIOS. Exclusive non ...

  • Siemens IPC427C - page 137

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 137 16.4 I/O Address Areas 16.4.1 Overview of the internal module registers Overview of the internal module registers The following addresse s are used for the internal registers: Addresses Input/output unit I/O 062h Watchdog enable registe ...

  • Siemens IPC427C - page 138

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 138 Operating Instructions, 04/2009, A5E02414743-01 16.4.2 Watchdog enable regis ter / 066h select register (read/write, ad dress 062h) Meaning of the bits Watchdog enable register / 066h select reg ister (r/w address 06 2h) Bit Meaning of the bits 7 6 5 4 3 2 1 0 Watchdog enable bit (WDE ...

  • Siemens IPC427C - page 139

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 139 16.4.4 CAN base address register ( write only, address 066h) A 512 byte window is created in the I/O area for the CAN controller (Philips SJA1000). The block itself only needs 32 or 128 bytes of this dependi ng on the operating mode. Th ...

  • Siemens IPC427C - page 140

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 140 Operating Instructions, 04/2009, A5E02414743-01 16.4.5 Output register LED 1 / 2 (read/write, address 404Eh) Meaning of the bits Output register LED 1 / 2 (read/ write addr ess 404E h) Bits 15 14 13 - 8 7 6 5 - 0 1 1 LED L1 / SF dark (default) 1 0 LED L1 / SF lights yellow 0 1 LED L1 ...

  • Siemens IPC427C - page 141

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 141 16.4.6 Battery status tab (r ead-only, address 50Fh) The status of the CMOS battery i s monitored; the status (two-tier) can be read from the battery status register. Meaning of the bits Battery status register (read-only, address 50Fh) ...

  • Siemens IPC427C - page 142

    Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 142 Operating Instructions, 04/2009, A5E02414743-01 16.4.7 SRAM address register The battery-buffered SRAM uses a 2 MB memory ad dress area, whic h can be read via the PCI register. Meaning of the bits SRAM add ress register PCI register address: SRAM base address register PCI register co ...

  • Siemens IPC427C - page 143

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 143 Appendix A A.1 Guidelines and declarations Notes on the CE Label The following applies to the SI MATIC product described in this documentation: EMC directive The devices meet the requirements for the EC directive "2004/108/EEC Electromagnetic Compatibility," and the foll ...

  • Siemens IPC427C - page 144

    Appendix A.2 Certificates and appro vals SIMATIC IPC427C 144 Operating Instructions, 04/2009, A5E02414743-01 A.2 Certificates and approvals DIN ISO 9001 certificate The Siemens quality management system for all prod uction proces ses (development, production and sales) meet s DIN ISO 9001:2000 requireme nts. This has been certified by DQS ( the Ger ...

  • Siemens IPC427C - page 145

    Appendix A.2 Certificates and appro vals SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 145 CANADA Canadian Notice T his Class A digi tal apparatus complies with Ca nadian ICES-003. Avis Canadian Cet appareil numérique de la classe B est conform e à la n orme NMB-003 du Canada. AUSTR ALIA This product meets the requir ements of ...

  • Siemens IPC427C - page 146

    Appendix A.3 Service and support SIMATIC IPC427C 146 Operating Instructions, 04/2009, A5E02414743-01 A.3 Service and support Local information Contain your S iemens representative ( http://www.siemens. com/automation/partner ) if you have questions about the product s described here. Technical documentation for SIMATIC products You can find additio ...

  • Siemens IPC427C - page 147

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 147 ESD guidelines B B.1 ESD Guidelines Definition of ESD All electronic modules are equipped with large-scale integrated ICs or components. Due to their design, these electronic elements are highly sensitive to overvoltage, and thus to any electrostatic discharge. The electrostatic s ...

  • Siemens IPC427C - page 148

    ESD guidelines B.1 ESD Guidelines SIMATIC IPC427C 148 Operating Instructions, 04/2009, A5E02414743-01 Electrostatic charging Anyone who is not connected to t he electrical potential of thei r surroundings can be electrostatically charg ed. The figure below shows the maximum el ectrostatic voltage which may build up on a person coming into contact w ...

  • Siemens IPC427C - page 149

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 149 List of abbreviations C C.1 Abbreviations Abbreviation Term M eaning AC Alternating current Alternating current ACPI Advanced Con figuration and Power Interface PLC Programmable controller AGP Accelerated Graphics Po rt High spee d bus system AHCI Advanced H ost Controller In terf ...

  • Siemens IPC427C - page 150

    List of abbreviations C.1 Abbreviations SIMATIC IPC427C 150 Operating Instructions, 04/2009, A5E02414743-01 Abbreviation Term M eaning CPU Central Proces sing Unit CPU CRT Cathode Ray Tube CSA Canadian Standards Association Canadian organization for te sts and certifications according to own or binational standar ds (with UL / USA) standards CTS Cl ...

  • Siemens IPC427C - page 151

    List of abbreviations C.1 Abbreviations SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 151 Abbreviation Term M eaning HD Hard disk Hard disk HDA High Defin ition Audio HDD Hard Disk Driv e HDD HU Height unit HMI Human Machine Interface User interface HORM Hibernate Once - Resume Many HT Hyper-Threading HTML Hyper Text Markup Lang ...

  • Siemens IPC427C - page 152

    List of abbreviations C.1 Abbreviations SIMATIC IPC427C 152 Operating Instructions, 04/2009, A5E02414743-01 Abbreviation Term M eaning NC Not Connected Not connected NCQ Native Command Queuing Automa tic re-sorting of the file and disk acc ess, for increased performance NEMA National Electrical Manufacturers Association Syndicate of manufacturers o ...

  • Siemens IPC427C - page 153

    List of abbreviations C.1 Abbreviations SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 153 Abbreviation Term M eaning SO-DIMM Small Outline Dual Inline Memory Modu le SOM SafeCard on Motherboard (SOM) SPP Standard Parallel Port Synonym for parallel port SSD Solid State Drive SVGA Super Video Graphics Array Enhanced VGA standard wi ...

  • Siemens IPC427C - page 154

    List of abbreviations C.1 Abbreviations SIMATIC IPC427C 154 Operating Instructions, 04/2009, A5E02414743-01 ...

  • Siemens IPC427C - page 155

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 155 Glossary AHCI mode AHCI is a standardized method to address the SATA controller. A HCI describes a struc ture in the RAM, which contains a general area for control and statu s, as well as a command list. APIC mode Advanced peripheral interrupt cont roller. 24 interrupt lines ar e ...

  • Siemens IPC427C - page 156

    Glossary SIMATIC IPC427C 156 Operating Instructions, 04/2009, A5E02414743-01 CE marking C ommunauté E uropéene The CE mark c onfirms compliance of the product with corresponding EC Directives, for example, with the EMC Directiv e. Chipset Located on the motherboard, connec ts the processor with the RAM, the graphi cs controller, the PCI bus, and ...

  • Siemens IPC427C - page 157

    Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 157 Device configuration The configuration of a PC or pro grammin g device contains info rm ation on hardware and device options, such as memory configuration, d rive types, moni tor, network address, etc. The data are stored in a configuration file and enable the oper ating ...

  • Siemens IPC427C - page 158

    Glossary SIMATIC IPC427C 158 Operating Instructions, 04/2009, A5E02414743-01 ESD directive Directive for using ele ctros tatic sensitive components. Ethernet Local network (bus structure) fo r text an d data communication w ith a transfer rate of 10/100/1000 Mbps. File Based Write Filter (EWF) Configurable write filter to protect individual files f ...

  • Siemens IPC427C - page 159

    Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 159 IGD Integrated Graphics Device. Graph ics interface integrated in th e chipset. Image This refers to the image, for exam ple, of hard disk partitions saved to a file in order to restore them when necessary. Intel VT The Intel Virtualization Technology (IVT) is the impl em ...

  • Siemens IPC427C - page 160

    Glossary SIMATIC IPC427C 160 Operating Instructions, 04/2009, A5E02414743-01 License key The license key represents the el ectronic license stamp of a li cense. Siemens provides the license keys for protecte d software. License key disk The license key disk contai ns t he authorizations or license keys required to enabl e protected SIMATIC software ...

  • Siemens IPC427C - page 161

    Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 161 NEC Class 2 The "NEC", National Electrical Code, is the USA colle ction of r egulations that generally correspond to German VDE 0100 st andard s. All USA standards gove rning the safety of electrical equipment and corresp onding "devi ations" in IEC st ...

  • Siemens IPC427C - page 162

    Glossary SIMATIC IPC427C 162 Operating Instructions, 04/2009, A5E02414743-01 PCMCIA Association consisti ng of approx. 450 member companies of the c ompute r industry whose focus is set on providing worldw ide standards for mini aturizati on and flexible use of PC expansion cards in o rder to provide basic tech nologies to the m arket. PEG interfac ...

  • Siemens IPC427C - page 163

    Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 163 PXE server A P reboot E x ecution E nvironment server is part of a net work environment and can provide software to connected computers ev en before they boot. This can involve operating system installations or servici ng tools, for ex ample. RAID R edundant A rray of I n ...

  • Siemens IPC427C - page 164

    Glossary SIMATIC IPC427C 164 Operating Instructions, 04/2009, A5E02414743-01 SCSI interface Small Computer System Interface Interface for connec ting SCSI d evices such as hard disk drives or optical drives. Session at once In session at once, the CD can be written to both with an audio session and a data session. The two sessions are written to a ...

  • Siemens IPC427C - page 165

    Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 165 Warm restart The restart of a computer after a program was aborted. The oper ating system i s loaded and restarted again. The CTRL + ALT+ D EL hotkey can be used to initi ate a warm restart. WLAN W ireless LAN is a local network that transmits data via radio waves , infra ...

  • Siemens IPC427C - page 166

    Glossary SIMATIC IPC427C 166 Operating Instructions, 04/2009, A5E02414743-01 ...

  • Siemens IPC427C - page 167

    SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 167 Index 2 24 V DC power supply Connectin g, 34 A Abbreviation s, 149, 154 Ambient and environmental conditio ns, 24 B Battery, 10, 72 Battery change, 71 Battery monitoring, 53 BIOS Setup, 113 Advanced Menu, 122 Defaults, 132 Exit menu, 131 Main menu, 117 Menu layout, 116 Security me ...

  • Siemens IPC427C - page 168

    Index SIMATIC IPC427C 168 Operating Instructions, 04/2009, A5E02414743-01 Watchdog, 138 Enhanced Write Filter, 48 Equipotential bonding, 18, 35, 55, 68 Error Messag es Troubleshooting, 89 ESD directives, 10 ESD guidelines, 147 Ethernet, 43 Ethernet address, 23 EWF (Enhanced Write Filt er), 48 Expansion frame, 61 Expansion slots, 93 External ports, ...

  • Siemens IPC427C - page 169

    Index SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 169 Compact Flash card, 81 Hard disk, 81 SSD drive, 81, 82 Windows XP Professional, 81, 82 PCI cards, 59 PCI-104 interface, 112 PE terminal, 35 Peripherals, 33 Connectin g, 143 Ports, 94 COM, 18 COM1, 107 Compact Flash card, 111 DVI/VGA, 18 DVI-I, 108 PCI -104, 112 RJ45 Ethernet ...

  • Siemens IPC427C - page 170

    Index SIMATIC IPC427C 170 Operating Instructions, 04/2009, A5E02414743-01 ...

Manufacturer Siemens Category Personal Computer

Documents that we receive from a manufacturer of a Siemens IPC427C can be divided into several groups. They are, among others:
- Siemens technical drawings
- IPC427C manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens IPC427C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens IPC427C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens IPC427C, service manual, brief instructions and user manuals Siemens IPC427C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens IPC427C.

Similar manuals

A complete manual for the device Siemens IPC427C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens IPC427C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens IPC427C.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens IPC427C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens IPC427C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens IPC427C, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens IPC427C - which should help us in our first steps of using Siemens IPC427C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens IPC427C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens IPC427C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens IPC427C?

Use the form below

If you did not solve your problem by using a manual Siemens IPC427C, ask a question using the form below. If a user had a similar problem with Siemens IPC427C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)