-
Miele CVA 4080 - page 1
Operating and installation instructions Built-in coffee machine CVA 4080 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 120 790 e n-G B ...
-
Miele CVA 4080 - page 2
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Brief descriptio ...
-
Miele CVA 4080 - page 3
Settings: Customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Selecting a language ...............................................3 0 Time of day ......................................................3 1 Display .......................................................3 1 Setting the time of day ............... ...
-
Miele CVA 4080 - page 4
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Rinsing ..........................................................5 1 Water container ...................................................5 2 Waste container ...................................................5 2 Drip tray ........... ...
-
Miele CVA 4080 - page 5
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Dispose of or recycl ...
-
Miele CVA 4080 - page 6
External view a Operating sensor controls. Lowest sensor = On / Off b Display c Operating sensor controls. Lowest sensor " + C" = Clear d Upper lighting e Door handle f Hot water spout g Lower lighting h Plastic grille i Drip tray cover j Coffee spouts, height-adjustable k Capuccinatore spout, removable for cleaning l Cappuccinatore sucti ...
-
Miele CVA 4080 - page 7
Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container Description of the machine 7 ...
-
Miele CVA 4080 - page 8
This machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on the installation, safety, operation and c ...
-
Miele CVA 4080 - page 9
~ The machine must only be operated when built in, to ensure that all electrical components are shielded. ~ Do not connect the machine to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger of overheating). ~ The second electrical connection socket on the back of the ma ...
-
Miele CVA 4080 - page 10
Correct use Caution. Danger of scalding. The spouts and the liquids dispensed are very hot. Never look directly at the lighting or use optical instruments to look at it. ~ The water piping and the Cappuccinatore must be rinsed through and the machine cleaned thoroughly before the first drink is prepared. ~ Only cold, fresh tap water should be used ...
-
Miele CVA 4080 - page 11
~ Depending on the natural oil content of the coffee used, the brew unit could become blocked. It is important therefore to clean the brew unit with a cleaning tablet after approx. 200 coffees. (A reminder will appear in the display). ~ Used coffee grounds should be put with the organic rubbish or on the compost heap, but not emptied down the sink, ...
-
Miele CVA 4080 - page 12
This machine can be used to prepare espresso, coffee, cappuccino, milk froth and hot water . This machine has a container for coffee beans so that they can be freshly ground on demand for every cup to benefit fully from the flavour. The ground coffee can also be moistened with hot water ( Pre-brewing ), to develop the aroma. Then hot water is force ...
-
Miele CVA 4080 - page 13
To ensure that the flavour can develop fully and be maintained for longer the machine has an additional function to automatically rinse and pre-warm the system when the machine is cold. The same function is used to flush coffee remains out of the system and the spouts after use. The hot water from the hot water spout is ideal for pre-warming the cu ...
-
Miele CVA 4080 - page 14
The following notes should help you get to know your coffee machine before starting to use it. Sensor controls This machine has sensor controls which react to touch. To operate the machine you only need to touch the relevant sensor. Display A double arrow will appear on the right of the display to indicate that further options are available on the ...
-
Miele CVA 4080 - page 15
The welcome screen will be displayed each time the machine is switched on until the 5 drinks (including steam) have been prepared: Míele Willkommen When you use the machine for the very first time you will be prompted to select a language. ^ Touch the sensor beside the language you want and then touch the sensor on the right beside "Continue& ...
-
Miele CVA 4080 - page 16
Please clean the machine thoroughly before filling the water container and the coffee bean container, (see "Cleaning and care"). Filling the water tank The quality of the water plays an important part in the overall quality of the coffee. The water container should therefore be emptied and filled with fresh water every day. To remind you ...
-
Miele CVA 4080 - page 17
^ Take off the lid and fill the water container with cold, clean tap water up to the "Max." mark. A valve at the front of the water container will ensure that water cannot escape. ^ Put the lid back on and replace the container in the machine, pushing it right to the back until it clicks into position. The water container must click into ...
-
Miele CVA 4080 - page 18
Adding ground coffee If you want to use ready ground coffee, you can add ground coffee to the specially designed coffee chute. To do this: ^ Pull the cover for the coffee chute right out of the machine and open up the lid (1). ^ Use the scoop supplied and place one level scoop of ground coffee into the coffee chute (2). Close the lid. ^ Push the co ...
-
Miele CVA 4080 - page 19
Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of coffee is prepared. Rinsing will take place automatically if the Automatic rinsing programme option has been set to "On" and the machine is cold. Hot water will run out of both spouts into the drip tray once the machin ...
-
Miele CVA 4080 - page 20
Pre-warming cups The cups should always be pre-warmed to allow the flavour to develop and be retained. The aroma of espresso does not react well to cold. The smaller the volume of coffee/espresso, the more important it is to pre-warm the cup. Use a plate warming drawer if you have one. If not you can warm them as follows: ^ Place the cup under the ...
-
Miele CVA 4080 - page 21
Preparing espresso and coffee from freshly ground beans ^ Place a cup under the coffee spouts. The coffee is always dispensed simultaneously from both spouts. ^ Touch the sensor beside espresso or coffee. The machine will now grind the coffee beans, pre-brew the ground coffee (if the programme option "Pre-brewing" has been set to "On ...
-
Miele CVA 4080 - page 22
To prepare two cups at the same time ^ Place a cup under each of the coffee spouts. ^ Touch the sensor beside espresso or coffee, and then touch the sensor beside "2 portions". The machine will now prepare a second portion of espresso or coffee a few seconds after the first one. Leave the cups under the coffee spouts until the main menu a ...
-
Miele CVA 4080 - page 23
If you have not added any ground coffee , you must select "No" . Otherwise the machine will assume that there is ground coffee in the chute and so only water will be dispensed the next time coffee is made! ^ Place a cup under the coffee spouts. The coffee is always dispensed simultaneously from both spouts. ^ Touch the sensor beside espre ...
-
Miele CVA 4080 - page 24
Cappuccino and milk froth Using for the first time or after descaling Before the coffee machine leaves the factory, the pipework is completely pumped out. This also happens during the descaling process. For this reason, water must be pumped into the pipework before using the machine to make a cappuccino or to froth milk for the first time or after ...
-
Miele CVA 4080 - page 25
Cappuccino To prepare a cappuccino you will need a large china or porcelain cup and a jug of milk. Froth is best made from cold milk. Any type of milk (cows, goats, rice, soya, etc) can be used to make froth. The fat content is also immaterial. Because the milk needs to be frothed, only one portion of Cappuccino can be prepared at one time. ^ Place ...
-
Miele CVA 4080 - page 26
The machine begins to froth the milk, stops briefly and then some frothed milk is dispensed into the stainless steel jug. When you have sufficient frothed milk in the stainless steel jug, stop the milk frothing process by touching the sensor beside "ok". Frothing milk and preparing coffee / espresso at the same time You can froth milk and ...
-
Miele CVA 4080 - page 27
A good espresso or coffee with a thick, even crema (froth) depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema should have an even colour with dark stripes running through it. You can set the amount of coffee beans to ...
-
Miele CVA 4080 - page 28
To alter the grinder setting ^ push the slide control to the left (for finer grinding) or to the right (for coarser grinding). You should be able to feel the notches when moving the slide control. If the slide refuses to move: ^ close the machine and dispense a cup of espresso coffee. Then try the slide control again. Setting the coffee grinder 28 ...
-
Miele CVA 4080 - page 29
It is easy to customise your machine to suit your exact requirements. The following settings are available: Language: Czech, Danish, German, English, Spanish, French, Italian, Hungarian, Dutch, Norwegian, Polish, Portuguese, Finnish, Swedish, Turkish, Greek and Russian Time of day: You can set either a 24 hour or 12 hour clock and choose to have th ...
-
Miele CVA 4080 - page 30
Buzzer tones: Volume, Keypad tones Plate warmer: Automatic, On, Off Factory default: All settings, User profiles A more detailed explanation of the programme options is given in the individual sections. Selecting a language If you want to change the language used in the display, use the Settings menu and follow the flag symbol. Main menu ß Mainten ...
-
Miele CVA 4080 - page 31
Time of day ^ Touch the upper or lower sensor on the right until "Settings" is visible in the left of the display. ^ Touch the sensor beside "Settings". Settings ß Language F ß Time of day ß Timer ^ Touch the sensor beside "Time of day". Display The Time of day display can be switched on or off. If the Display On op ...
-
Miele CVA 4080 - page 32
Setting the time of day ^ Touch the sensor beside "Set". ^ First set the hours by touching the sensors on the right beside "+" or "-". Then touch the sensor beside "ok". ^ Now set the minutes by touching the sensors on the right beside "+" or "-". Then touch the sensor beside "ok" ...
-
Miele CVA 4080 - page 33
If rinsing is set to "On", the machine will automatically carry out a brief rinse when it switches itself on. If the machine has switched itself on automatically 3 times and no drinks or hot water have been dispensed, the machine will not switch itself on again automatically! The programmed times will, however, remain in memory and can be ...
-
Miele CVA 4080 - page 34
^ Touch the sensor beside "ok". If you activate the Timer, the coffee machine will switch off every day at the time you have set. If rinsing is set to "On" and the machine has been used for making drinks, it will automatically carry out a brief rinse before it switches itself off. Activate: If you touch the sensor beside "A ...
-
Miele CVA 4080 - page 35
Create To create a new User profile, ^ Touch the sensor beside "Create". ^ Touch the middle sensor on the right or left of the display until the first letter is highlighted. Then touch the sensor beside "Select character". ^ Repeat this step until the name you want for the new User profile appears in the display. To delete a let ...
-
Miele CVA 4080 - page 36
Change You can programme the machine so that it always reverts to the Standard profile or so that it continues to operate using a User profile you have set. To set the profile to be used: ^ touch the sensor beside "Change". You can now select one of the following: Do not change The machine will continue to operate using the User profile y ...
-
Miele CVA 4080 - page 37
Amount of coffee Both the flavour and the crema on the coffee depend on the quantity of ground coffee used. 6 to 14 grams of coffee beans are used per cup, depending on the type of coffee. The greater the quantity, the stronger the espresso, coffee or cappuccino. The quality of the crema is also affected by the quantity: – If the crema is evenly ...
-
Miele CVA 4080 - page 38
When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. When the pre-brewing function is switched off, the hot water is forced through the coffee immediately. Select the User profile for which you want to set ...
-
Miele CVA 4080 - page 39
Settings ß Amount of coffee ß Pre-brewing ß Temperature ^ Touch the sensor beside "Temperature". You can set different temperatures for espresso, coffee, cappuccino and hot water. ^ Touch the sensor beside the type of drink for which you want to set the temperature. ^ Touch the upper or middle sensor on the right until the temperature ...
-
Miele CVA 4080 - page 40
Settings ß Pre-brewing ß Temperature ß Automatic rinsing ^ Touch the sensor beside "Automatic rinsing". A tick will appear to show if the Automatic rinsing option is on or off. ^ Touch the sensor beside "On" or "Off" and then touch the sensor beside "ok" to save the setting. It is a good idea to set this o ...
-
Miele CVA 4080 - page 41
Lighting (with the machine switched on) The "Lighting" option in the "Settings" menu allows you to decide which type of lighting to have when the machine is switched on . The lighting can be switched on automatically, switched off or even dimmed. The dimming option also allows you to dim just the upper or lower lighting to suit ...
-
Miele CVA 4080 - page 42
Lighting (with the machine switched off) 14:18 ß Lighting W ß "Lighting" in the initial menu (which is only visible if the time of day display has been set) allows you to select the type of lighting for when the machine is switched off . This means that the machine can be lit up even when it is not being used. You can switch the lightin ...
-
Miele CVA 4080 - page 43
Dim These are the same as the settings for "Dim" when the machine is switched on. Touch the sensor beside "ok" to save the settings. Touch " + C" to return to the previous options. Displaying the number of cups of coffee already dispensed (Total no. of coffees) If you touch the sensor beside "Total no. of coffees& ...
-
Miele CVA 4080 - page 44
^ Touch the sensor beside "On" and then the sensor beside "ok". The machine is now locked and cannot dispense. A closed lock symbol X will appear in the display. To deactivate the system lock ^ Touch the lower sensor on the right beside X . ^ Touch the sensor beside "Off" and then the sensor beside "ok". The ...
-
Miele CVA 4080 - page 45
^ Dip the strip in your drinking water for approximately a second, then shake off any excess water. The result will be evident after about a minute. If the water is harder than 40 °d / 7.0 mmol/l, limescale will build up more rapidy than with soft water. Descaling will need to be carried out more regularly than stated to prevent limescale damage t ...
-
Miele CVA 4080 - page 46
^ Touch the upper or middle sensor on the right until the correct water hardness is visible on the left of the display. ^ Touch the sensor beside the correct water hardness. A tick will appear beside the water hardness which is currently set. ^ Touch the sensor beside "ok" to save the setting. Main menu (changing the order) The different ...
-
Miele CVA 4080 - page 47
Display You can adjust both the contrast and the brightness of the display: ^ Touch the sensor beside "Settings". Settings ß User profile ß Main menu ß Display ^ Touch the sensor beside "Display". ^ Touch the sensor beside Contrast or Brightness and set the level with the middle sensor on the right or left of the display. ^ T ...
-
Miele CVA 4080 - page 48
Plate warmer You can connect a Miele EGW 4000-14 or EGW 4000-29 plate warmer to the coffee machine using a special connection cable available as an optional accessory from your Miele Dealer or the Miele Spare Parts Department. Once the plate warmer is connected, you will need to "install" the plate warmer in the "Settings" menu. ...
-
Miele CVA 4080 - page 49
Factory default Selecting "Factory default" will take you into the sub-menu. You can then select whether you want to reset All settings back to the factory default settings (Timer, Automatic rinsing, Steam system, Lighting, System lock, Water hardness, Display, Plate warmer, the most recently selected type of coffee, User profiles and all ...
-
Miele CVA 4080 - page 50
The flavour of the coffee produced depends on the type of coffee, the amount of coffee used, how finely the beans are ground and particularly, the quantity of water used. Not all cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme in the amount to be used. Espresso a quant ...
-
Miele CVA 4080 - page 51
Always allow the machine to cool down before cleaning. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage the machine. Never use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. It is important to clean the machine regularly, as the used coffee grounds will soon go mou ...
-
Miele CVA 4080 - page 52
Water container Empty the water container daily and fill with fresh, cold drinking water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine. ^ Clean the surface the water container sits on thoroughly. ...
-
Miele CVA 4080 - page 53
^ Also clean the now accessible area in the machine where the waste container sits, thoroughly. ^ Push the waste container fully back into the machine. Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this mess ...
-
Miele CVA 4080 - page 54
^ Push the drip tray with the grid along the right hand edge back into the machine. ^ Close the machine door. Grille with drip tray cover ^ Take the grille and drip tray cover out and wash them. Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container rig ...
-
Miele CVA 4080 - page 55
Coffee outlet connection The part which connects the brew unit and the coffee outlet is located on the inside of the machine door. ^ Clean this connection regularly with a damp cloth, taking care not to wipe the grease off the seal. ^ Lubricate the seal at least once a month with the grease supplied. Interior and machine door ^ First take out all r ...
-
Miele CVA 4080 - page 56
Brew unit The brew unit must be cleaned manually once a week because the moving parts are lubricated and the rubber seals could become brittle in a dishwasher. ^ Remove the water container, waste container and the coffee chute cover. ^ Press the light coloured button under the handle of the brew unit a and whilst doing so turn the handle in the dir ...
-
Miele CVA 4080 - page 57
^ Wipe any remaining coffee off the two filters. One filter is located in the funnel a and the other to the left of the funnel b . ^ Dry the funnel area a to prevent ground coffee from sticking to it. ^ Clean the inside of the machine and remove any coffee residues. It is best to use a vacuum cleaner to remove dry ground coffee. ^ Place the brew un ...
-
Miele CVA 4080 - page 58
Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit could become blocked. It should therefore be cleaned after approx. 200 portions have been prepared using the cleaning tablets supplied with the machine. These have been specially formulated for use in this coffee machine and are available from your Miele ...
-
Miele CVA 4080 - page 59
When Please place a cleaning tablet in the ground coffee chute appears in the display, ^ Remove the coffee chute cover and open the lid of the coffee chute. ^ Place a cleaning tablet into the coffee chute. ^ Close the lid, replace the coffee chute cover and close the machine door. ^ Touch the sensor beside "Continue". Carry out the prompt ...
-
Miele CVA 4080 - page 60
^ Touch the sensor beside "Maintenance". ^ Touch the sensor beside "Rinse Cappuccinatore". ^ Place a glass of water under the suction tube and a descaling funnel under the Cappuccinatore spout to direct the water safely into the drip tray and touch the sensor beside "ok". The Cappuccinatore will draw up water for a whi ...
-
Miele CVA 4080 - page 61
^ Dismantle the parts. Remove the part with the seals by turning and then pulling it. ^ Wash the parts in the dishwasher. After cleaning, lubricate the seals with the grease supplied. Make absolutely sure that none of the small holes in the parts are blocked (see arrow). You can knead the soft parts to unblock them. This is important for trouble-fr ...
-
Miele CVA 4080 - page 62
^ that all the guide points line up. ^ Place the Cappuccinatore in the machine from below a and turn the cover above the spout in the direction of the arrow b . Do not use the machine without the Cappuccinatore in place. Steam would escape, uncontrolled, from the machine. Danger of scalding and the machine would be damaged. Cleaning and care 62 ...
-
Miele CVA 4080 - page 63
Machine front ^ Clean the front of the machine with a solution of hot water and washing-up liquid applied with a damp cloth. Wipe everything dry with a soft cloth. Make sure that no water penetrates behind the display. E-Cloth A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, or via the internet (depending on c ...
-
Miele CVA 4080 - page 64
Stainless steel fronts The machine front is susceptible to scratches and abrasion. Stainless steel surfaces can be cleaned using a Miele E-Cloth or with a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel. N.B. Do not use stainless steel cleaning agents on the controls. To help prevent re-soiling, a conditioni ...
-
Miele CVA 4080 - page 65
The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display for the first time: " 50 drinks can be made. Please run the descaling program ...
-
Miele CVA 4080 - page 66
To run the descaling programme ^ If you want to descale the machine before it has heated up touch the sensor beside "Descale" in the initial menu to begin the descaling programme. ^ If you want to descale the machine without being prompted to do so by the reminder (because your water is very hard, for example), select the "Maintenanc ...
-
Miele CVA 4080 - page 67
^ Fit the descaling funnels under the spouts as illustrated. The bottom of the funnel fits into the drip tray to enable the descaling agent to be collected in it. During the descaling programme, water containing descaling agent will run out of the hot water and the cappuccinatore spouts. This is followed by an activation period before a little more ...
-
Miele CVA 4080 - page 68
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Various messages will appear in the display ...
-
Miele CVA 4080 - page 69
. . . the machine suddenly switches itself off. The machine will switch itself off automatically after a certain length of time if it is not being used. This time depends on the switch off time which has been programmed . The water temperature could be too high . The machine will remain switched off until the water has cooled down sufficiently. Che ...
-
Miele CVA 4080 - page 70
. . . the coffee grinder makes a louder noise than usual. There could be stones in amongst the coffee beans. ^ Switch the machine off immediately. ^ Contact the Miele Service Department. . . . the coffee grinder makes less noise than usual. The coffee bean container is empty. A message will soon appear in the display. ^ Wait until the grinder makes ...
-
Miele CVA 4080 - page 71
^ Select a slightly coarser coffee grinder setting or a lower setting for the amount of coffee to be ground. . . . the machine door will not close. ^ Are the containers in position correctly? . . . the steam system is switched off but steam is still available. If the steam system is still hot, steam will still be available. However, if the steam sy ...
-
Miele CVA 4080 - page 72
^ Switch the machine off and then back on again with the master switch. ^ Buff the contacts a little, e.g. with fine glasspaper or emery cloth. ^ If this fault message continues to appear, please call the Miele Service Department. . . . the machine does not rinse through when switched on, even though the Automatic rinsing programme is set to " ...
-
Miele CVA 4080 - page 73
. . . the coffee machine makes loud noises during the descaling programme. During the descaling programme you will hear loud noises as water is flushed through the machine under high pressure. These are no cause for concern. . . . the heating-up time is getting longer, the amount of water coming through is incorrect and the machine is not performin ...
-
Miele CVA 4080 - page 74
. . . the fault message 10 or 17 appears. Water has not been taken in. ^ The water container has not been correctly positioned inside the machine. Remove the water container and push it back in again, making sure it is positioned correctly. ^ This error message also appears if the water container was not correctly filled for descaling. Fill the wat ...
-
Miele CVA 4080 - page 75
. . . milk spits out of the jug when making the first froth of the day. If the door was opened during the heating up phase, pressure will have built up in the steam valve. When the valve was opened, this pressure caused the milk to come out of the spout too fast. . . . the milk-frothing process starts, stops and starts again. This is not a fault. T ...
-
Miele CVA 4080 - page 76
. . . the ground coffee chute cover cannot be pushed in properly. ^ Is the lid of the ground coffee chute closed? ...i ti sn o t possible to make coffee/espresso using ground coffee. ^ Before making coffee or espresso using ready ground coffee, ensure that the main menu is showing in the display. . . . the message "too much ground coffee" ...
-
Miele CVA 4080 - page 77
In the event of a fault which you cannot correct yourself, please contact: – your Miele Dealer or – the Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your machine. These are shown on the data plate inside the machine. Please note that tel ...
-
Miele CVA 4080 - page 78
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not su ...
-
Miele CVA 4080 - page 79
Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (a ...
-
Miele CVA 4080 - page 80
Building-in and combination options The coffee machine is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer). ...
-
Miele CVA 4080 - page 81
Installation Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit. The machine must be built in before it is operated. Two allen keys (size 3 and 5) are required for installation. ^ Using the large allen key, unscrew all four feet out by about 2 mm. ^ P ...
-
Miele CVA 4080 - page 82
^ Push it all the way into the niche until you feel resistance. ^ Open the machine door and partially tighten the side socket screws. ^ Carefully turn the lower socket screws a to centre the machine in the niche. ^ Tighten both upper socket screws b by hand to secure the machine in the unit. Do not overtighten them. Installation 82 ...
-
Miele CVA 4080 - page 83
Adjusting the door hinges If the machine door becomes difficult to open or close after installation you can adjust the hinges to realign it: ^ To adjust the door in direction a , turn screw a . ^ To adjust the door forwards or backwards, (direction b ), turn screw b . Installation 83 ...
-
Miele CVA 4080 - page 84
Alteration rights reserved / 2407 CVA 4080 M.-Nr. 07 120 790 / 00 ...
Do you have a question concerning Miele CVA 4080?
Use the form below
If you did not solve your problem by using a manual Miele CVA 4080, ask a question using the form below. If a user had a similar problem with Miele CVA 4080 it is likely that he will want to share the way to solve it.