Manual Friedrich US10C10

31 pages 2.75 mb
Download

Go to site of 31

Summary
  • Friedrich US10C10 - page 1

    Unifit Cool Svc Parts 2010 (05/10) Thru-the-Wall Series Thru-the-Wall Series Ser vice and P ar ts Man ual 115 Volts US08C10 US10C10 US12C10 Uni- Fit R Unifit. Cool (03/07) 230 Volts US10C30 US12C30 US14C30 www.sylvane.com 1-800-934-9194 ...

  • Friedrich US10C10 - page 2

    —2— 1. PREF A CE 1.1 SAFETY PRECAUTIONS ...............................2 1.2 INSULATION RESISTANCE TEST.................2 1.3 SPECIFICATIONS ..........................................3 ~8 1.4 FEATURE S ..................................................... 9 1.5 CONTROL LOCATION S ................................. 9 2. DISASSEMBL Y INSTR UCTIONS ...

  • Friedrich US10C10 - page 3

    —3— 1.3 SPECIFICA TIONS US08C10 POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PR ...

  • Friedrich US10C10 - page 4

    US10C10 1.3 SPECIFICA TIONS POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R-410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PROTECTOR ...

  • Friedrich US10C10 - page 5

    —5— US10C30 POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PROTECTOR COMPRESSOR F ...

  • Friedrich US10C10 - page 6

    US12C10 POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R-410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PROTECTOR COMPRESSOR FAN MOTO ...

  • Friedrich US10C10 - page 7

    US12C30 POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R-410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PROTECTOR COMPRESSOR FAN MOTO ...

  • Friedrich US10C10 - page 8

    US14C30 POWER SUPPLY COOLING CAPACITY (Btu/h) INPUT (W) RUNNING CURRENT (A) E.E.R (Btu/w.h) REFRIGERANT (R-410A) CHARGE OPERATING INDOOR (°F) TEMPERATURE OUTDOOR (°F) EVAPORATOR CONDENSER FAN, INDOOR FAN, OUTDOOR FAN SPEEDS, FAN/COOLING FAN MOTOR OPERATION CONTROL ROOM TEMP. CONTROL AIR DIRECTION CONTROL CONSTRUCTION PROTECTOR COMPRESSOR FAN MOTO ...

  • Friedrich US10C10 - page 9

    — 9 — 1.4 FEA TURES • Designed for cooling only. • Powerful and quiet. • Slide out chassis for the simple installation and service. 1.5 CONTR OL LOCA TIONS 1.5.1 COOLING ONL Y MODEL • OPER A TION • Built in adjustable THERMOSTAT . • Washable one-touch filter . • Compact size . • VENTILA TION Push the lever to the "CLOSE&quo ...

  • Friedrich US10C10 - page 10

    — 10 — 2.1 MECHANICAL P AR TS 2.1.1 FRONT GRILLE 1. Open the inlet grille downward. 2. Remove the screw which fastens the front grille. 3. Pull the front grille from the right side. 4. Remove the front grille. (See Fig. 1) 5. Re-install the component by referring to the removal procedure. 2.1.2 CABINET 1. After disassembling the FRONT GRILLE, r ...

  • Friedrich US10C10 - page 11

    Figure 7 — 11 — 2.2 AIR HANDLING P AR TS 2.2.1 ORIFICE, AND TURBO F AN 1. Remove the front grille. (Refer to section 2.1.1) 2. Remove the cabinet. (Refer to section 2.1.2) 3. Remove the 2 screws which fasten the evaporator at the left side and the right side. (See Fig. 4) 4. Move the evaporator to the side carefully. 5. Remove the orifice. (See ...

  • Friedrich US10C10 - page 12

    — 12 — 2.2.3 SHROUD 1. Remove the fan. (Refer to section 2.2.2) 2. Remove the shroud. (See Fig. 9) 3. Re-install the components by referring to the removal procedures, above. 2.3 ELECTRICAL P AR TS 2.3.1 MO T OR 1. Remove the cabinet. (Refer to section 2.1.2) 2. Remove the clamp cord and disconnect the wire housing in control box. (Refer to sec ...

  • Friedrich US10C10 - page 13

    — 13 — 2.3.4 PO WER CORD 1. Remove the control box. (Refer to section 2.1.3) 2. Unfold the control box. (Refer to section 2.3.3) 3. Disconnect the grounding screw from the Base pan. 4. Disconnect 2 receptacles. 5. Remove a screw which fastens the clip cord. 6. Pull the power cord. (See Fig. 13) 7. Re-install the components by referring to the r ...

  • Friedrich US10C10 - page 14

    — 14 — 2.4 REFRIGERA TION CYCLE 2.4.1 CONDENSER 1. Remove the cabinet. (Refer to section 2.1.2) 2. Remove the brace. (Refer to section 2.2.1) 3. Remove the 7 screws which fasten the condenser. 4. After discharging the refrigerant completely into a Freon TM Recovery System, unbraze the interconnecting tube at the condenser connections. 5. Remove ...

  • Friedrich US10C10 - page 15

    — 15 — — Replacement of the refrigeration cycle. 1. When replacing refrigeration components, be sure to discharge the refrigerant system using a Freon TM recovery System. Install a valve for the recovery, before venting the Freon, remove the valve when finished. 2. After discharging the unit completely, remove the desired component, and unbra ...

  • Friedrich US10C10 - page 16

    — 16 — Equipment needed: Vacuum pump, Charging cylinder, Manifold gauge, Brazing equipment, Pinch-off tool capable of making a vapor-proof seal, Leak detector, Tubing cutter, Hand Tools to remove components, Service valve. A COMPOUND GAUGE EVAPORATOR (LOW PRESSURE SIDE) COMPRESSOR CAPILLARY TUBE CONDENSER (HIGH PRESSURE SIDE) SEE INSETS BELOW M ...

  • Friedrich US10C10 - page 17

    — 17 — 3. TR OUBLESHOO TING GUIDE 3.1 OUTSIDE DIMENSIONS 20- 3 / 32 " (499mm) 24" (610mm) 14- 3 / 8 " (366mm) CONDENSER COILS EV APORA TOR COILS FA N M OTO R : REFRIGERANT FLOW TURBO F AN CAPILLAR Y TUBE COMPRESSOR 3.2 PIPING SYSTEM Following is a brief description of the important components and their functions in the refrigerat ...

  • Friedrich US10C10 - page 18

    — 18 — 3.3 TR OUBLESHOO TING GUIDE In general, possible trouble is classified in two causes. One is called Starting Failure which is caused from an electrical defect, and the other is Ineffective Air Conditioning caused by a defect in the refrigeration circuit and/or improper application. Unit is running but cooling is ineffective Ineffective C ...

  • Friedrich US10C10 - page 19

    — 19 — Fails to Start Check circuit break er and fuse. Check control board Only f an fails to start. Improper wiring. Def ect of fan motor capacitor . Irregular motor resistance ( ). Irregular motor insulation ( ). Replacement of f an motor Regular but f ails to star t Replacement of compressor (locking of rotor , metal) Improper ther mostat se ...

  • Friedrich US10C10 - page 20

    Y D E M E R E S U A C T N I A L P M O C Check voltage at outlet. Correct if none. Connect wire. Refer to wiring diagram for terminal identification. Repair or replace loose terminal. Test capacitor. Replace if not within ± 10% of manufacturer's rating. Replace if shorted, open, or damaged. Fan blade hitting shroud or blower wheel hitting scro ...

  • Friedrich US10C10 - page 21

    —2 1 — M U M I X A M M U M I N I M G N I T A R E T A L P E M A N V 5 . 6 2 1 V 5 . 3 0 1 V 5 1 1 V 3 5 2 V 7 8 1 V 0 3 2 / 8 0 2 Y D E M E R E S U A C T N I A L P M O C Check voltage. See the limits on the preceding. page. If not within limits, call an electrician. Check the wire connections, if loose, repair or replace the terminal. If wires a ...

  • Friedrich US10C10 - page 22

    — 22 — COMPLAINT CAUSE REMEDY Check the voltage. See the limits on the preced- ing page. If not within limits, call an electrician. Check overload, if externally mounted. Replace if open. (If the compressor temperature is high, remove the overload, cool, and retest.) If not running, determine the cause. Replace if required. Remove the cabinet. ...

  • Friedrich US10C10 - page 23

    — 23 — 4. SCHEMA TIC DIA GRAM 4.1 CIRCUIT DIA GRAM (SMPS) MEZ62420710 250V/T2A (250V/T3.15A) WIRING DIAGRAM www.sylvane.com 1-800-934-9194 ...

  • Friedrich US10C10 - page 24

    567502 550140 359012 352380 346811 149980 130410 435300 435301 147582-1 147581 135303 152302 147582-2 135312 349480 W48602 731273 C B 567480 W0CZZ 249950 238310 237200 A 264110 MO E D M I T R E W O P R E N A F D E E P S F an y g r e n E r e v a S C ool Ti me r P M E T ' F F 1L O W F 2M E D F3H IGH 132100 131400 55901 1 26871 1-2 26871 1-1 2671 ...

  • Friedrich US10C10 - page 25

    W 0CZZ CAPACITOR,FILM,BOX 67300709 130410 BASE ASS EMBLY,SINGLE 67302925 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67306106 135312 GRILLE ASSEMBLY ,FRONT(SINGLE) 673060 12 238310 ESCUTCHEON 67500114 W 48602 CLAMP,SPRING 67302500 346811 MOTOR ASSEMBLY,SINGLE 67303021 147581 LOUVER,HORIZONTAL 67306205 147582-1 LOUVER,VERTICAL ...

  • Friedrich US10C10 - page 26

    W 0CZZ CAPACITOR,FILM,BOX 67300724 130410 BASE ASS EMBLY,SINGLE 67305520 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67306106 135312 GRILLE ASSEMBLY ,FRONT(SINGLE) 67306012 238310 ESCUTCHEON 67500114 W 48602 CLAMP,SPRING 67302500 346811 MOTOR ASSEMBLY,SINGLE 67303023 147581 LOUVER,HORIZONTAL 67306205 147582-1 LOUVER,VERTICAL 6 ...

  • Friedrich US10C10 - page 27

    W 0CZZ CAPACITOR,FILM,BOX 67300709 130410 BASE ASS EMBLY,SINGLE 67302925 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67306106 135312 GRILLE ASSEMBLY ,FRONT(SING LE) 67306012 238310 ESCUTCHEON 67500114 W 48602 CLAMP,SPRING 67302500 346811 MOTOR ASSEMBLY,SINGLE 67303024 147581 LOUVER,HORIZONTAL 67306205 147582-1 LOUVER,VERTICAL ...

  • Friedrich US10C10 - page 28

    —2 8 — W 0CZZ CAPACITOR,FILM,BOX 67300729 130410 BAS E ASSEMBLY ,SINGLE 67305520 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67306106 135312 GRILLE ASS EMBLY,FRONT(SINGLE) 67306012 238310 ESCUTCHEON 67500114 W 48602 CLAMP,SPRING 67302500 346811 MOTOR ASSEMBLY ,SINGLE 67303023 147581 LOUVER,HORIZONTAL 67306205 147582-1 LOUV ...

  • Friedrich US10C10 - page 29

    —2 9 — W 0CZZ CAPACITOR,FILM,BOX 67300726 130410 BASE A SSEMBLY ,SINGLE 67305520 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67 306106 135312 GRILLE ASSEMB LY,FRONT(SINGLE) 67306012 238310 ESCUTCHEON 67 500114 W 48602 CLAMP,SPRING 673 02500 346811 MOTOR ASSEMBLY,SINGLE 6730 3037 147581 LOUVER,HORIZONTAL 6730620 5 147582-1 ...

  • Friedrich US10C10 - page 30

    — 30 — W 0CZZ CAPACITOR,FILM,BOX 67300709 130410 BASE ASS EMBLY,SINGLE 67302926 130900 CABINET 67303717 132100 FRAME 67308102 135303 GRILLE,INLET 67306106 135312 GRILLE ASSEMBLY ,FRONT(SINGLE) 67306012 238310 ESCUTCHEON 67500114 W 48602 CLAMP,SPRING 67302500 346811 MOTOR ASSEMBLY,SINGLE 67303037 147581 LOUVER,HORIZONTAL 67306205 147582-1 LOUVER ...

  • Friedrich US10C10 - page 31

    Unifit Cool Svc Parts 2010 (05/10) Printed in the U.S.A Post Office Box 1540 • 4200 N. Pan Am Expressway • San Antonio, Texas 78295-1540 • (210) 357-4400 • FAX (210) 357-4480 FRIEDRICH AIR CONDITIONING CO. Visit our web site at www.friedrich.com P/NO.:3828A20294U www.sylvane.com 1-800-934-9194 ...

Manufacturer Friedrich Category Air Conditioner

Documents that we receive from a manufacturer of a Friedrich US10C10 can be divided into several groups. They are, among others:
- Friedrich technical drawings
- US10C10 manuals
- Friedrich product data sheets
- information booklets
- or energy labels Friedrich US10C10
All of them are important, but the most important information from the point of view of use of the device are in the user manual Friedrich US10C10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Friedrich US10C10, service manual, brief instructions and user manuals Friedrich US10C10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Friedrich US10C10.

Similar manuals

A complete manual for the device Friedrich US10C10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Friedrich US10C10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Friedrich US10C10.

A complete Friedrich manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Friedrich US10C10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Friedrich US10C10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Friedrich US10C10, that we can find in the current document
3. Tips how to use the basic functions of the device Friedrich US10C10 - which should help us in our first steps of using Friedrich US10C10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Friedrich US10C10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Friedrich US10C10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Friedrich US10C10?

Use the form below

If you did not solve your problem by using a manual Friedrich US10C10, ask a question using the form below. If a user had a similar problem with Friedrich US10C10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)