English dropdown-ico

Manual Audiovox MA200C

12 pages 0.07 mb
Download

Go to site of 12

Summary
  • Audiovox MA200C - page 1

    1 REMOTE CONTROL MOT ORCYCLE ALARM SYSTEM INST ALLA TION GUIDE AND OWNERS MANUAL MODEL MA200C ...

  • Audiovox MA200C - page 2

    2 MOUNTING THE SIREN/CONTROL MODULE 1. Choose a location that is away from hot and mov- ing parts considering the Red wire length must be connected to the to the positive terminal of the bat- tery . Prevent access to the siren as much as pos- sible, by mounting in a hidden location. T ypical locations are underneath the gas tank, seat or ex- terior ...

  • Audiovox MA200C - page 3

    3 BLACK (LONG): Using the attached wire lug, connect the Black (long) wire of the siren to the negative terminal of the battery or a good ground source. BLACK (SHORT): Stretch the short Black antenna wire as long as pos- sible, avoiding metal contact if possible. This is the an- tenna wire for the alarm system; route it as high as possible! BROWN/B ...

  • Audiovox MA200C - page 4

    4 CONNECTING THE RELAY (HORN FEATURE) IMPORTANT! The relay has been shipped with the BLACK wire loaded into terminal 87a of the Relay Socket. The wire must be removed from this location and placed into the outer terminal of the Relay Harness 87. 1 . Connect the ORANGE wire from the relay harness to the BROWN/BLACK wire from the main harness. Be sur ...

  • Audiovox MA200C - page 5

    5 CONNECTING THE RELAY (STARTER/IGNITION) IMPORTANT ! When using the relay to disable the starter, leave the BLACK wire in ter- minal 87a of the relay connector in the location shown in the Figure 5. 1. Connect the ORANGE wire from the relay harness to the ORANGE wire from the siren harness. Be sure to insulate this splice with electrical tape. Ref ...

  • Audiovox MA200C - page 6

    6 CONNECTING THE RELAY (HEAD LAMP FLASH FEATURE) IMPORTANT! When using the relay to flash the vehicle’s parking lights, unload the BLACK wire from terminal 87A of the relay harness and load it into terminal 87. Refer to Figure 6. 1 . Connect the ORANGE wire from the relay harness to the WHITE wire from the main harness. Be sure to insulate this s ...

  • Audiovox MA200C - page 7

    7 2 . Turn the ignition "ON" then "OFF" 5 times. The system will sound a long chirp to confirm entry into the program mode. 3 . Press the "LEFT" button of each transmitter to be programed (up to Two Transmitters). The siren will chirp to confirm each transmitter is now programmed. 4. Turn the ignition "ON" th ...

  • Audiovox MA200C - page 8

    8 NOTE: If the alarm issues three warnings within 15 seconds, the siren will sound a regular alarm tone which lasts for 30 seconds. After 30 seconds, the siren will automatically stop and the alarm will arm itself. OPERATING THE SYSTEM Operation of the system is described in this section. Sounds that can be produced by the alarm system will consist ...

  • Audiovox MA200C - page 9

    9 To activate the panic feature: 1 . Press and hold button 1 on the keychain transmitter for 3 seconds. 2 . The alarm will sound, and continue to sound for 30 seconds. 3 . To silence the alarm before the 30-second shut- down, press and hold button #2 on the keychain transmitter. WARNING: In most areas, it is illegal to activate the alarm while the ...

  • Audiovox MA200C - page 10

    10 Replacing the Transmitter Battery The keychain transmitters have a small, red LED visible through the top cover. This LED can be used to indicate battery condition. You will also notice a decrease in effective transmitter range as the battery deteriorates. The replacement battery must be a 12 volt type GP27A or equivalent. To replace the transmi ...

  • Audiovox MA200C - page 11

    11 TROUBLESHOOTING: Symptom: The Transmitters will not program to the control module. Check: 1. Verify that the 1 Amp fuse in the red wire from the siren control module is in good condition. Replace it if it is blown. 2. Verify that the connections of the red and black wires have been made according to the wiring section of this manual. 4. The batt ...

  • Audiovox MA200C - page 12

    12 © 2002 Audiovox Electronics Corp., Hauppauge, NY 1 1788 128-6276 999 .audiovo x.com For C ust omer Ser vi ce Vi si t Ou r W ebsi te At Product I n f orm ati on, Photos, F A Q’ s O wner’ s Manual s ...

Manufacturer Audiovox Category Automobile Alarm

Documents that we receive from a manufacturer of a Audiovox MA200C can be divided into several groups. They are, among others:
- Audiovox technical drawings
- MA200C manuals
- Audiovox product data sheets
- information booklets
- or energy labels Audiovox MA200C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Audiovox MA200C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Audiovox MA200C, service manual, brief instructions and user manuals Audiovox MA200C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Audiovox MA200C.

Similar manuals

A complete manual for the device Audiovox MA200C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Audiovox MA200C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Audiovox MA200C.

A complete Audiovox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Audiovox MA200C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Audiovox MA200C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Audiovox MA200C, that we can find in the current document
3. Tips how to use the basic functions of the device Audiovox MA200C - which should help us in our first steps of using Audiovox MA200C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Audiovox MA200C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Audiovox MA200C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Audiovox MA200C?

Use the form below

If you did not solve your problem by using a manual Audiovox MA200C, ask a question using the form below. If a user had a similar problem with Audiovox MA200C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

Magali

Manual del usuario en español latino