English dropdown-ico

Manual Tapco Blend 6

20 pages 1.25 mb
Download

Go to site of 20

Summary
  • Tapco Blend 6 - page 1

    o wner’ s m anual by ...

  • Tapco Blend 6 - page 2

    2 SAFETY INSTRUCTIONS 1. Read Instructions — All the safety and operation instructions should be read before this product is operated. 2. Retain Instructions — The safety and operating instructions should be kept for future reference. 3. Heed W arnings — All war nings on this product and in these operating instructions should be followed. 4. ...

  • Tapco Blend 6 - page 3

    Part No. 0008813-90 Rev. A 1/04 ©2004 LOUD T echnologies Inc. All Rights Reserved. 3 What me, read a manual? Before you begin, please make sure you read the Safety Instructions on page 2 and Getting Started on page 4. Y our new T APCO ® Blend 6 mixer is designed to set up quickly and operate easily. W e know it ’ s often seen as a sign of weakn ...

  • Tapco Blend 6 - page 4

    4 Getting Started The following steps will help you set up your mixer , and get the levels and adjustments just right. ZERO THE CONSOLE: 1. Turn everything off, including the mixer ’ s POWER switch and PHANTOM POWER switch. 2. Turn down the channel strip GAIN, AUX 1, AUX 2, and LEVEL controls. 3. Center the channel strip EQ and P AN controls. 4. ...

  • Tapco Blend 6 - page 5

    5 A FEW PREC A UTIONS: • Never listen to loud music for prolonged periods. Please see the Safety Instructions on page 2 for information on hearing protection. • Never plug ampli fi er speaker-level outputs into anything except speakers. • Never use guitar cables to connect ampli fi ers to speakers. • Before making connections to an extern ...

  • Tapco Blend 6 - page 6

    6 Here ’ s a quick glance at all the features packed into this mixer: 2 mono mic/line channels, with: • V ariable input trim (+3 to +50 dB for microphones, and – 22 to +25 dB for line-level inputs) • Phantom power (globally switched) • Level Set indicator LED • XLR microphone input jack • 1/4" TRS instrument line input jack • P ...

  • Tapco Blend 6 - page 7

    7 Hookup Diagrams Small Club Gig 3/4 BAL BAL / UNBAL UNBAL L R LINE IN 5/6 BAL BAL / UNBAL UNBAL L R LINE IN 12 ( MON O ) ( MONO ) MIC INPUT INPUT MIC INPUT INPUT INST INPUT INPUT IN OUT L R PHONES L R L R R AUX S EN DS DS IN IN OUT OUT AUX RETURN MAI N MIX N MIX CTR L R L R OOM FX MON CD/ TAPE ( MO NO ) L LEVEL LEVEL SET SET GAIN INST INPUT INPUT ...

  • Tapco Blend 6 - page 8

    8 Blend 6 Features CHANNEL INPUTS 1. MIC (MICROPHONE) INPUTS The Blend 6 is equipped with two rugged, low- noise, phantom-powered microphone preampli fi ers, providing up to 50 dB of crystal-clear ampli fi cation. Their balanced circuitry rejects all manner of extraneous inter ference. Professional condenser , dynamic, and ribbon mics all sound e ...

  • Tapco Blend 6 - page 9

    9 CHANNEL CONTROLS Channel strips 1 and 2 allow adjustment of EQ, Pan and Level for mono signals. Channel strips 3/4, and 5/6 allow adjustment of stereo or mono signals. The output from each strip passes onto the left and right main mixes. Auxiliary signals can be tapped off and sent to monitors or processors. The block diagram on page 17 shows how ...

  • Tapco Blend 6 - page 10

    10 12. A UX RETURN INPUTS Connect the outputs of an external parallel effects device into these inputs. When connecting a mono device (just one cord), always use the left (mono) input and plug nothing into the right input. The signal will appear on both sides. The signals are added into the main mix, and a summed mono signal is added to the monitor ...

  • Tapco Blend 6 - page 11

    11 MASTER SECTION Before you read this section, have a read of the channel strip controls in the previous section. 16. PO WER LED This LED turns on when the mixer is switched on, and (as you can probably guess) it turns off when the mixer is switched off. 17. PHANT OM POWER SWITCH and LED Push in this switch to provide phantom power to the MIC (1) ...

  • Tapco Blend 6 - page 12

    12 OUTPUT CONNECTIONS 24. MAIN OUTPUTS These 1/4" TRS jacks represent the end of the mixer chain, where your fully mixed stereo signal enters the real world. Connect these outputs to the inputs of your ampli fi ers, powered speakers, or serial effects processor (graphic equalizer , for example). 25. CTRL ROOM OUTPUTS These 1/4" TRS jacks ...

  • Tapco Blend 6 - page 13

    13 Appendix A: Service Infor mation Repair Service for T APCO mixers is available at our factory, located in sunny W oodinville, W ashington. Service for T APCO mixers living outside the United States can be obtained through local dealers or distributors. If your mixer needs service, follow these instructions: 1. Review the preceding troubleshootin ...

  • Tapco Blend 6 - page 14

    14 Appendix B: Connections XLR Connectors Channels 1 and 2 use 3-pin female XLR connectors on the MIC inputs. They are wired as follows, according to standards speci fi ed by the AES (Audio Engineering Society). XLR Balanced Wiring: Pin 1 = Shield Pin 2 = Hot (+) Pin 3 = Cold ( – ) 1/4" TRS Phone Plugs and Jac ks “ TRS ” stands for Tip- ...

  • Tapco Blend 6 - page 15

    15 Appendix C: Blend 6 Speci fi cations Frequency Response Mic Input to any Output (Trim at 0 dB): +0, – 1 dB, 20 Hz to 20 kHz – 3 dB, 10 Hz to 80 kHz Distortion THD and SMPTE IMD; 20Hz to 20kHz Mic Input to Main Output: < 0.025% @ +4 dBu output Noise 20 Hz to 20 kHz BW (150 Ω source impedance) Equivalent Input Noise (EIN): – 128 dBu Re ...

  • Tapco Blend 6 - page 16

    16 AC Power Requirements External Power Supply output: 9.0 V AC @ 1500 mA (2.5 mm AC coaxial power connection) External Power Supply AC input U.S. 120 V AC, 60 Hz Europe 240 V AC, 50 Hz Japan 100 V AC, 50/60 Hz Korea 220 V AC, 60 Hz Ph ysical Dimensions and W eight Height: 2.6 in/66.7 mm Width: 8.3 in/209.6 mm Depth: 10.5 in/266.7 mm W eight: 3.5 l ...

  • Tapco Blend 6 - page 17

    17 Block Diagram This shows an outline of the strange goings on inside the mixer . PHANTOM MIC IN +48 VDC INST IN LINE IN LEFT (MONO) LINE IN RIGHT A UX RETURN LEFT (MONO) A UX RETURN RIGHT SHEL VING EQ LEVEL SET MONO CHANNELS 1 and 2 GAIN HIGH 80 12K LOW SHEL VING EQ HIGH 80 12K LOW PA N LEVEL LEVEL A UX 2/FX A UX 1/MON MAIN MIX STEREO CHANNELS A ...

  • Tapco Blend 6 - page 18

    18 T rac k Sheets Use these sheets to record some of your favorite settings. GAIN U -22dB +25dB +3 +5 0 MIC GAIN U -22dB +25dB +3 +5 0 MIC T APCO Blend 6 NO TES 1 MON MO N 2 FX FX AUX SEND SE N D 1 MON MO N 2 FX FX AUX SEND SE N D 1 MON MO N 2 FX FX AUX SEND SE N D 1 MON MO N 2 FX FX AUX SEND SE N D NR M EQ CD/ TA TA PE T O M O M AI N M N M I X OFF ...

  • Tapco Blend 6 - page 19

    19 T APCO LIMITED W ARRANTY A. LOUD T echnologies Inc. warrants all materials, workmanship and proper operation of this T APCO product for a period of one year from the original date of purchase. If any defects are found in the materials or workmanship, or if the product fails to function properly during the applicable warranty period, LOUD T echno ...

  • Tapco Blend 6 - page 20

    tapcogear .com ...

Manufacturer Tapco Category Musical Instrument

Documents that we receive from a manufacturer of a Tapco Blend 6 can be divided into several groups. They are, among others:
- Tapco technical drawings
- Blend 6 manuals
- Tapco product data sheets
- information booklets
- or energy labels Tapco Blend 6
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tapco Blend 6.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tapco Blend 6, service manual, brief instructions and user manuals Tapco Blend 6. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tapco Blend 6.

Similar manuals

A complete manual for the device Tapco Blend 6, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tapco Blend 6 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tapco Blend 6.

A complete Tapco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tapco Blend 6 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tapco Blend 6, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tapco Blend 6, that we can find in the current document
3. Tips how to use the basic functions of the device Tapco Blend 6 - which should help us in our first steps of using Tapco Blend 6
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tapco Blend 6
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tapco Blend 6 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tapco Blend 6?

Use the form below

If you did not solve your problem by using a manual Tapco Blend 6, ask a question using the form below. If a user had a similar problem with Tapco Blend 6 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)