English dropdown-ico

Manual Cisco Universal Broadband Router Cisco uBR10012

280 pages 0.41 mb
Download

Go to site of 280

Summary
  • Cisco Universal Broadband Router Cisco uBR10012 - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco uBR1 0 0 1 2 Univ er sal Br oadband Router Hardw are Installation Guide October 20 1 1 Text Part Number: OL -18259-09 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 2

    THE SPECIFICATION S AND INFORMATION REGARDING THE P RODUCTS IN TH IS MANUAL AR E SUBJECT TO CHAN GE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 3

    i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 CONTENTS Preface i Document Revision History i Purpose ii Audience ii Document Organization ii Related Documentation iii Conventi ons iv Safety Information Referral Warning iv Terms and Acronyms v Obtaining Documentation and Submitting a Serv ice Request vi CHAPTER ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 4

    Contents ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 PRE2 Modules 1-20 PRE4 Modules 1-20 Redundant PRE Modules 1-21 PRE Module Description 1-21 Connector Ports 1-22 PC Media Card Slots 1-22 LCD Screens 1-22 PRE LED Indicators and Buttons 1-22 PRE Module Disposal 1-23 SIP and SPA Compatibility 1-24 Timing, C ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 5

    Contents iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Environmental Site Require ments 2-5 Temperature and Humidity Requirements 2-7 Power Guidelines 2-7 Power Connection Guidelines fo r DC-Powered Systems 2-8 Plant Wiring Guidelines 2-9 Interference Considerations 2-9 Cabling Guid elines 2-9 Ethernet and F ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 6

    Contents iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Connecting the Lineage Pow er Shelf to the UBR-PWR-DC= Module 3-25 Connecting the Lineage Pow er Shelf to the UBR-PWR-DC-PLUS= Module 3-27 Connecting the Alarm Monitor Cable 3-31 Prerequisites 3-31 Required Tools and Equipment 3-31 Steps 3-31 Disconnectin ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 7

    Contents v Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Formatting PC Media Cards 3-66 CHAPTER 4 Troubleshooting the Installation 4-1 Troubleshooting Methods 4-2 Before You Call for Technical Assistance 4-2 Problem Solving Using a Subsystems Approach 4-2 Troubleshooting Installation Problems 4-3 General Trouble ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 8

    Contents vi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Removing and Replacing a Network Lin e Card 5-21 Removing the Network Line Card 5-21 Installing the Network Line Card 5-25 Removing the Half-Height Gigabit Ethernet Line Card and the Slot Splitter 5-27 Removing a Half-Height Gig abit Ethernet Line Card 5- ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 9

    Contents vii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 NTSC (M) Cable Television Channel Freq uencies for Japan C-8 NTSC Cable Television Channel Frequencies for the Republic of Korea C-10 PAL/SECAM Cable Television Channels and Relative Frequencies C-14 PAL SECAM (D/K) Cable Television Channel Fre quencies ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 10

    Contents viii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 11

    FI GU R E S i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 1-1 Cisco uBR10012 Universal Broadband Router—Front Vie w with Front Cover 1-8 Figure 1-2 Cisco uBR10012 Router Chassis—Front View without the Front Cover 1-9 Figure 1-3 Cisco uBR10012 Router Chassis—Rear View 1-10 Figure 1-4 Cisco uBR10012 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 12

    Figure s ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 3-11 Ferrite Beads on Ground Cable and Alarm Cable 3-18 Figure 3-12 Ferrite Beads Attached on DC-input Power Cables 3-19 Figure 3-13 Ferrite Beads on the Lineage Power Shelf 3-20 Figure 3-14 Attaching Grounding Wire to the Grounding Lug 3-21 Figure ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 13

    Figures iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 5-5 Stripping Insulation 5-8 Figure 5-6 Alarm Terminal Block Connections 5-9 Figure 5-7 Loosenin g the Captive Scre ws 5-11 Figure 5-8 Opening the Ejector Levers 5-12 Figure 5-9 Removing the PRE Mod ule from the Chassis 5-13 Figure 5-10 Inserting t ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 14

    Figure s iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure B-1 RJ-45 Plug and Receptacle B-2 Figure B-2 Rollover Cable B-3 Figure B-3 RJ-45 Rollover Cab le Identification B-3 Figure B-4 Crossover Cable B-5 Figure B-5 RJ-45 Crossover Cable Identification B-6 Figure B-6 Straight-through Cable B-6 Figure B-7 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 15

    TABLES i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T able 1-1 DOCSIS and EuroDOCSIS 1.1 Upstr eam Data Rates 1-5 T able 1-2 DOCSIS and EuroDOCSIS 2.0 Upstr eam Data Rates 1-6 T able 1-3 DOCSIS and EuroDOCSIS Downstream Data Rates 1-6 T able 4 Specifications of the DC PEM module s 1-14 T able 1-5 Supported Ex ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 16

    Tables ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T able B-2 Auxiliary Port Signaling B-4 T able B-3 10Base-T RJ-45 Connec tor Pinouts B-7 T able C-1 Analog Television System Ba seband Video Parameters C-2 T able C-2 Analog Television Chro minance Subcarrier Frequencie s C-2 T able C-3 Analog Television Sy ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 17

    i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface This section describes the purpose, audience, organi zation, and con ventions used in this guide. This section also provides a re vision history and a list of related documents as well as instructions for obtaining technical assistance and addition al infor ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 18

    ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Purpose This installa tion guide explains the ini tial hardware inst allation and basic co nfiguration procedures fo r the Cisco uBR10012 un iv ersal broadband router . It contains procedures for installing the router hardware, creating a basic softw are c ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 19

    iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Related Documentation The follo wing is a list of do cuments and URLs for the Cisco uBR1001 2 router: • Cisco uBR10012 Universal Br oadband Rout er Softwar e Conf igur ation Guide http://www .cisco.com/en/ US/docs/cable/cmt s/ub r10012/conf iguration/gu ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 20

    iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface – For information on IP , refer to the Network Pr otocols Configur ation Guid e, P art 1 and the Network Pr otocols Co mmand Reference, P art 1 publicat ions. Y ou can also refer to the Cisco IOS software releas e notes for the versio n of software you a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 21

    v Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Terms and Acronyms T o fully understand the co ntent of this guide, yo u should be familiar w ith the follo wing terms and acronyms: Note A complete list of terms and acron yms is av ailable in the Internetworking T erms and Acr onyms guide, av ailabl e on ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 22

    vi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface • OIR—Online insertio n and remov al • PCI—Peripheral Comp onent Interconnect • PCMCIA—Personal Computer Memory Card International Associat ion • PPP—Point-to-Point Protocol • QoS—Quality of service • rcp—remote copy prot ocol • R ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 23

    CH A P T E R 1-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 1 Cisco uBR10012 Universal Broadband Router Overview The Cisco uBR10012 uni versal broadband router pro v ides a high-end, high-performance, high-capacity Cable Modem T ermination System (CMTS) solut ion. The Cisco uBR10012 router i s an aggre gation ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 24

    1-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Features Cisco uBR10012 Router Features The Cisco uBR10012 router has the follo wing f eatures: • 19-inch rack mo unt, 22.75-inch de pth. See “Cisco uBR10012 Router” . • 31 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 25

    1-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Comparisons with Other Cisco CMTS Platforms • Fan module—F orced-air con vection cooling, see “Fan Assembly Module” . – V ariable speed le vels. The operati ng speed of the fan is determined b ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 26

    1-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Functional Overview Upstream Data Path The follo wing e xample describes the upstream data path. 1. A request for service is generate d by a subscriber . The modem transmits the re ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 27

    1-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router and Cisco IOS Software a. Each ASIC decodes the head er to determine if th e pack et is destined for one of the do wnstream ports on that card. If so, the downstream header is remo ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 28

    1-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router and Cisco IOS Software T able 1 -2 DOCSIS and E uroDOCSIS 2.0 Upstr eam D ata Rates Upstream Channel Width Modulation Scheme, bit/symbol Baud Rate, symbol/sec Raw Bit Rate, Mb/sec ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 29

    1-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview NEBS Level 3 Compliance NEBS Level 3 Compliance The Cisco uBR10012 router is Netw ork Equipment Building S ystem (NEBS) Lev el 3 compliant. Thi s includes the following cate gories: • Filtration and f ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 30

    1-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-1 sho ws the front of th e Cisco uBR10012 router with the fro nt cov er installed. Figur e 1 -1 Cisco uBR1 0 0 12 Universal Br oadban d Rout ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 31

    1-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Hardware Figure 1-2 sho ws the front of a fully loaded chassis without the front cov er . Note Figure 1-2 is a sample repres entation of th e Ci sco uBR10012 ch ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 32

    1-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-3 sho ws the rear of a ful ly-loaded Cisco uBR10 012 router . Figur e 1 -3 Cisco uBR1 0 0 12 Rout er Chassis—Rear V iew Caution The handl ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 33

    1-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Hardware Cisco uBR10012 Router Slot Numbering Figure 1-4 sho ws the slot numberin g for the line cards a nd TCC+ cards in the rear of the chassis. The Cisco uB ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 34

    1-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-5 sho ws the slot numberin g for the F ast Ethernet interf ace on the acti ve PRE mo dule. Figur e 1 -5 Cisco uBR1 0 0 12 Chassi s Slot Num ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 35

    1-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Cisco uBR10012 Universal Broadband Router Modules The following section describes the modules u sed in the Cisco u BR10012 rout er . For a list of fiel ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 36

    1-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules DC Power Entry Modules The Cisco uBR10012 router is shipped w ith two DC po wer entry modules (DC PEMs) th at provide power to the system. One DC PEM ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 37

    1-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Supported External AC-Input Power Shelves If 100–120 V A C is the only a vailabl e power source at the faci lity , then use the external A C -input p ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 38

    1-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules way that the po wer connecti ons reside facing in side the rack when vie wed from the fro nt. This allo ws the DC output terminals of the e xternal A ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 39

    1-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Figure 1 -7 Rear View of the Lineag e AC-DC P ow er Shelf with Cables T o meet comp liance stan dards, use the DC po wer ca bles (3 m cable supplied al ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 40

    1-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules Figure 1 -8 LCD Module Disp lay P anel Note The LCD modu le functions de pend on the rele ase of the Cisco IO S software running on you r Cisco uBR100 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 41

    1-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules LCD Cable The LCD ribbon cable connects the LCD module to th e backplane. The folded end is connected to the LCD module. See Figure 1-9 . Figur e 1 -9 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 42

    1-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules combination of a general purpose RISC pr oce ssor with adv anced programmable PXF netw ork processors provides the capacity to support th e aggregati ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 43

    1-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Redundant PRE Modules The PRE module support s redundant operat ion (two PRE mo dules in a Ci sco uBR10012 chassis). If the primary PRE fails, the seco ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 44

    1-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules Connector Ports The faceplate on the PRE contains th ree ports with RJ-45 connectors: • Console port—This asynchronou s EIA/TIA-232 serial port is ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 45

    1-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules on the (primary) PRE during an alarm condi tion shuts of f the external alarm, b ut does not deacti v ate the alarm LEDs on the PRE faceplate. Alarm LE ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 46

    1-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules SIP and SPA Compatibility The Cisco uBR10012 router cu rrently supports the follo wing SIPs: • Cisco W ideband SIP for t he Cisco Wideband SP A • ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 47

    1-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Figur e 1 -13 TCC+ Card F aceplat e The faceplate on the TCC+ card has sev en LEDs labeled PO WER, ST A TUS, MAINT , PRESENT , and A CTIVE. Separate PR ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 48

    1-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview DOCSIS Timing, Communication, and Contr ol Card DOCSIS Timing, Communication, and Control Card On the Cisco uBR10012 uni v ersal broadband router , th e DTCC ca rd acts as a se condary processor that p ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 49

    1-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interfa ce Line Cards Cable Interface Line Cards The follo wing section describes the cable interface line cards used in the Cisco uBR10012 u niv ersal broadband router . • Cisco uBR-MC5X20S/U/ ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 50

    1-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Cisco UBR-MC20X20V Cable Interface Card The Cisco UBR-MC20X20V cable interface line card is a 20 by 16 inch card designed speci fically for the Cisco uBR10012 uni v ersal bro ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 51

    1-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards Network Uplink Cards The follo wing sections describe the netw ork upli nk cards used in the Cisco uBR10012 uni versal broadband router: • Cisco Single Port Gi gabit Ethernet Lin ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 52

    1-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplin k Cards Figure 1-15 sho ws the faceplate for the Gigabit Ethernet line card. Figure 1 -15 Gigabit Ethernet Line Car d F aceplate Cisco Gigabit Ethernet Line Card LEDs Ta b l e 1 - 8 descr ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 53

    1-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards GBIC Specifications Ta b l e 1 - 9 lists the GE line card GBICs and their respecti ve cable ty pes and lengths. Cisco Half-Height Gigabit Ethernet Line Card The Cisco HHGE line car ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 54

    1-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplin k Cards War ni ng Because invisible radiation may be emitted from the apertu re of the port when no fiber cable is connected, avoid exposure to radiation and do not stare into open apertu ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 55

    1-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards Cisco uBR10-SRP-OC12SML DPT WAN Line Card The Cisco uBR10 Spatial Reuse Protocol ( SRP) OC 12 single-mode f iber , long-reach (SML) dynamic packet transpor t (DPT) W AN line card p ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 56

    1-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Optical Connec tors and Cables Optical Connectors and Cables For singl e-mode optical f iber connections, u se one duplex SC-typ e cable (see Figure 1-17 ), or two simplex SC-type cables (see Figure 1- ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 57

    1-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources PRE1 (spare) ESR-PRE1/R= PRE2 (primary and redundant ) ESR-PRE2/R PRE2 (spare) ESR-PRE2= PRE4 (primary and redundant) ESR-PRE4 PRE4 (spare) ESR-PRE4/R= PRE PC media ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 58

    1-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Rout er FRU Resources FRU Documentation Ta b l e 1 - 1 3 lists the Cisco f ield replaceable unit (FR U) do cumentation for the mod ules and interface lin e cards that are used in the Cis ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 59

    1-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources Document title URL DC P ower Entry Module for the Cisco uBR10 012 Universal Br oadband Ro uter http://www .cisco.com/en/US/docs/cable/cmts/ubr 100 12/installation/f ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 60

    1-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Rout er FRU Resources Document title URL Cisco Half-H eight Gigabit Ethernet Line Card http://www .cisco.com/en/US/docs /interfaces_mod ules/cable /line_card s/ubr_hh_ge/ quick/start /ub ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 61

    CH A P T E R 2-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 2 Preparing for Installation Before you install the Cisco uBR1001 2 uni versal broadband router , consider: • The power and cabling requirements that must be in place at your install ation sites • The equipment required to install the router • ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 62

    2-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Preventing El ectrostatic Disch arge Damage • Do not wear loose clothin g, jewel ry (including ring s and ch ains), or other items that could get caught in the chassis. • The Cisco uBR10012 router operates sa fely when it ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 63

    2-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Chassis-Liftin g Guid elines Chassis-Lifting Guidelines The Cisco uBR10012 chassis is not intended to be mo ved freq uently . When fully populated, the Cisco uBR10012 system weighs approximatel y 230 pounds. A depopulated ch ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 64

    2-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Electrical Safety Electrical Safety All system components are hot-swappable. They are designed to be removed and replaced while the system is operating wit hout presenting an electrical hazard or damage to the syst em. Follo ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 65

    2-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Environmental Site Requirements The en vironmental mo nitoring functional ity in the Cisco uBR10012 rout er protects the system and components from potenti al damage from e xcessi ve v o ltage and temperatur ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 66

    2-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements Figur e 2-1 Cooling Air P ath fo r the Cisco uBR1 0 0 12 56430 ALARM S C ISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R N E T L I N K A C T I V I T Y A U ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 67

    2-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Temperature and Humidity Requirements Ta b l e 2 - 1 lists the operating and nonoperating en vironmental site requirements. The ranges listed are those within which the Ci sco uBR10012 router conti nues to o ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 68

    2-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements Power Connection Guidelines for DC-Powered Systems The DC-input po wer supply allo ws the Cisco uBR10012 router to o perate on either –48 or –60 VDC systems. Both these po wer supplies can operate wi th ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 69

    2-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Plant Wiring Guidelines When planning the locat ion of the ne w system, consi d er the distance l imitations for signaling, EMI, and connector compatibility , as described in the follo wing sections. War ni ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 70

    2-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements • Distance limitations for each si gnal type • The specific cables you need to connect each interface • Any additio nal interface equipment you need, su ch as transceiv ers, hubs, switches, modems, ch ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 71

    2-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Rack-Mounting Considerations The Cisco uBR10012 router should b e rack-mounted for proper o peration and maintenance. The rack-mounting hardw are included with chassis i s suitable for st andard 19-inch equ ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 72

    2-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements • If you are also usin g the optional A C-inp ut pow er shelf, it should be installed immediately below the Cisco uBR10012 chassi s for po wer cabling con v enience. Ho we ver , install the A C-input po w ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 73

    CH A P T E R 3-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 3 Installing the Cisco uBR10012 Router This chapter describes the pr ocedures for installing the Cisco uBR10012 uni versal br oadband router in an equipment rack. It also describe s how to connect interface and power cables, the proper way to po wer ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 74

    3-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installation Methods Installation Methods For stab ility and ease of use, the Cisco uBR10012 router ch assis should be mounted in an equipment rack. The chassis can be mounted in a 19-inch (standard) equipment rack ( ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 75

    3-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Preparing the Cisco uBR10012 Router for Rack-Mounting General Rack Installation Guidelines When planning you r rack installation, consider t he follo wing guidelines: • The Cisco uBR10012 router ch assis requires ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 76

    3-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Removing the Chassis Components Before Installation The Cisco uBR10012 router is shipped w ith all ordere d components already installed in the chassis. When fully ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 77

    3-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Removing the Chassis Co mponents Before Installation Figur e 3-1 Captive Scr ew Locations Step 3 Use a scre wdri v er to loosen the top and bottom capti v e scre ws until the y disenga ge and spring a way from the f ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 78

    3-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Figure 3-2 Opening the Ejector Levers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Always install a full-slot blan ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 79

    3-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Removing the Chassis Co mponents Before Installation Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist strap to your wrist and to ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 80

    3-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Step 4 Slide the splitter ou t of the slot ( Figure 3-4 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, install a full-slot blank face ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 81

    3-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching the Mounting Brackets Attaching the Mounting Brackets The Cisco uBR10012 router is shipped w ith four mounting brack ets that can be attached to ei ther the front or rear of the chassis, depending on your ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 82

    3-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figure 3-6 Brack et Location for Fl ush F ront-Mounting the Chassis 72311 ALARM S CISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 83

    3-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching the Mounting Brackets Figur e 3-7 Brac k et Location for Flush Rear -Mounting th e Chassis 72312 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 84

    3-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figur e 3-8 Brac k et Location for Of fset F ront-Mounting the Chassis Note Y ou must use three scre ws to inst all each large bracket and two scre ws to install each small bracket. T ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 85

    3-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Cable Manag ement Brackets (Option al) Installing the Cable Manage ment Brackets (Optional) The Cisco uBR100 12 router is shipped w ith two cable- management brackets that are in stalled on the rear ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 86

    3-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack Use the follo wing procedure to in stall the optional cable-management brackets on the rear of t he Cisco uBR10012 chassis: Step 1 Position the f irst mounting brack et immediately a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 87

    3-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Mounting the Chassis in the Rack Ti p If you are installing the chassis in an equipment rack, it is helpful to hav e a third person a v ailable to maneuver the ch assis into position an d attach the brackets to the ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 88

    3-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack War ni ng At least three people are required to mount the she lf in the equipment rack: two people are needed to hold the shelf in place while a third person tightens the mounting sc ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 89

    3-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-1 0 Installing the Chassis in a Ra c k using the Rear Mounting Brac k ets Attaching Ferrite Beads on the Cables Ferrite beads can be clamped on where the beads ar e a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 90

    3-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-1 1 Fer r it e Beads on Gr ound Cable and Alar m Cable Attaching Ferrite Beads on DC Power Cables For Class B emission compli ance requirements, two ferrite beads must ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 91

    3-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-12 Fer r ite Beads Attac h ed on DC-input P ow er Cables Attaching Ferrite Beads on the Lineage Power Shelf An additional set of ferrite be ads are required if you ar ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 92

    3-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Ch assis to Ground Figure 3-13 F er r it e Beads on the Lineage P o we r Shelf Connecting the Chassis to Ground Connecting the Cisco uBR10012 rout er chassis to earth ground is required f or all DC po ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 93

    3-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the Chassis to Ground Attaching the Grounding Cable The follo wing procedure describes ho w to attach: • The grounding lug t o the grounding cable. • The grounding cable to the ch assis. • The grou ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 94

    3-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Ch assis to Ground Figur e 3-15 Location of th e Grou nd Lug Connect ors 103479 ALARM S CISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R N E T L I N ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 95

    3-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the External AC-i nput Power Shelf to the Cisco uBR10012 Router The follo wing sections describe ho w to connect th e Lineage A ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 96

    3-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Step 1 Open the safety cov er from abov e the DC terminal blocks b y rotating the safety cov er up and of f of the DC terminal bl ocks of t ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 97

    3-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the Lineage Power Shel f to the UBR-PWR-DC= Module Prerequisites • Connect the DC power cables, alarm cables, and the A C-in ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 98

    3-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-16 Lineage AC-DC P o w er Shelf Conn ected t o UBR-PWR-DC= PEM Modul e Step 5 Connect the A C po wer cables to a standard wall so ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 99

    3-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the Lineage Power Shelf to the UBR-PWR-DC-PLUS= Module Prerequisites • T wo Lineage A C-DC po wer shelves are required to sup ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 100

    3-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-1 7 DC Y P o wer Ca ble with Lugged Ends Caution Only the left DC po wer terminals of the tw o Li neage shelves are used with UBR ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 101

    3-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Figure 3-1 8 Cabling T wo Lineag e P ow er Shelves wi th DC Y P ower Cables and Al ar m Cables Step 2 Connect the DC “Y” power cables ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 102

    3-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-19 DC Y P o wer Cables and Alar m Cables Connect ed fr om Lineage P ow er Shelves t o UBR-PWR-DC-PLUS= Modules 1 Alarm monitor ca ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 103

    3-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Note Ensure that you lift the handles and route the cabl es underneath th e handles and through t he po wer cord clips of the PEM modules ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 104

    3-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figure 3-21 Alar m M onitor Cable with PIN and RJ-45 connectors 2. Connect the two RJ-45 connector ends of the alar m monitor cable into th ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 105

    3-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Figur e 3-22 Alar m Monitor Cabl e Connected Fr om the Line age A C-DC Po w er Shelf to UBR-PWR-DC= Module 276473 CISCO 10000 PERFORMANCE ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 106

    3-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting DC Power to the Cisco uBR10012 Router Disconnecting Cables from the Li neage AC-DC Power Shelf and the Cisco uBR10012 Router T o disconnect cables from the Lineage AC -DC power shel f and the Cisco uBR100 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 107

    3-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting DC Power to the Cisco uBR10012 Router War ni ng Care must be given to conne cting units to the supply circuit so th at wiring is not overloaded. Statement 51 War ni ng This product requires short-circuit ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 108

    3-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Alarm Ind icators Connecting the Cisco uBR10012 Chassis to a DC Power Source The DC po wer sources can be present at the site, or the y can be provided b y an external A C-input po wer shelf. If you are u ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 109

    3-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Alarm Indicators Connecting the Alarm Indicators Use the fol lowin g procedure to connect an al arm indicator t o the chassi s: Step 1 Obtain suf ficient wire for the desi red connections. Y ou will need ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 110

    3-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Alarm Ind icators Figur e 3-24 Alar m T er min al Bloc k Connections Step 6 Go to the next section, Connecting the Console Port an d Auxiliary Port , page 3-50 , to continue the installati on. 103482 A L ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 111

    3-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Module s Installing the Modules T o install t he modules in the Cisco uBR10012 router : Step 1 Remov e the front co ver b y pulling the co ve r tow ards you and carefully set it aside. • Fan assemb ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 112

    3-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Modules Also, do not attempt to remo ve the Ci sco MC28C card or the Cisco MC16x card from their carriers (adapter cards) while the they are installed in th e chassis. See the “Removing and Replacin ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 113

    3-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Module s Figure 3-25 Inser ting the Ca ble Int erf ace Line Card 72325 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 4 U S 1 5 U S 1 6 U S 1 7 U S ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 114

    3-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figur e 3-26 Closing the Ejector Lev ers Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card This section descri bes how ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 115

    3-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Caution Y ou must use slot 3 or slot 4 when installing the slot splitter and HHGE line card i n the Cisco uBR10012 router , using sl ot 1 or s ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 116

    3-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figure 3-27 HHGE Line Card Locations 135149 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 117

    3-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 3-28 Inserting the Slot Split t er 135151 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 118

    3-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figur e 3-29 Captive Scr ew Locations War ni ng Blank faceplates and c over panels serve three important functions: they preve nt exposure to ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 119

    3-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot splitter ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 120

    3-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push t he line card into the splitter until you can feel it ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 121

    3-49 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 3-32 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw s ( ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 122

    3-50 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Console Port and Auxiliary Port Connecting the Console Port and Auxiliary Port The PRE module on the Cisco uBR10012 router has tw o asynchronous serial (E IA/TIA-232) RJ-45 ports that provide connecti ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 123

    3-51 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the Console Port and Auxiliary Po rt Connecting to the Console Port The console port provides local administrati ve access to the router and its comma nd-line interface (CLI). Note Each PRE module must h ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 124

    3-52 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Console Port and Auxiliary Port • 9600 baud • 8 data bits • No parity generat ion or checking • 1 stop bit • No flo w control Step 6 If also connecting a modem to the auxiliary po rt, go to ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 125

    3-53 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Netw ork Management Cable s Step 5 Make sure that t he modem and auxiliary port on the router are conf igured fo r the same transmission speed (38.4 Kbps and 56 Kbps are typical). Configur e the modem fo ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 126

    3-54 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Network Man agement Cables Step 1 Connect one end of the Ethernet cable to the RJ-4 5 port on the primary PRE, labeled Ethe rnet (see Figure 3-36 ). Step 2 Run the other end of the Ethernet cable through ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 127

    3-55 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Netw ork Management Cable s • The same rule applies to pins 2 through 8 on each connector . The color of the wire at tached to a pin on one connector shou ld matc h the color of the wire attached to th ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 128

    3-56 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Cable Interf ace Line Cards an d Network Uplink Cards Connecting Cable Interface Line Cards and Network Uplink Cards Because there are very specific requirements for cablin g the d if ferent line c ards a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 129

    3-57 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Cable Inte rface Line Cards and Network Uplink Cards Note If you hav e completed all cable connections, go to the “Replacing the Front Co ver” section on page 3-60 to continue the installation. If yo ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 130

    3-58 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Cable Interf ace Line Cards an d Network Uplink Cards Caution Make sure your fiber optic connecto rs are clean and debris free. Refer to Inspection and Cleaning Pr ocedur es for F iber-Optic Connections a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 131

    3-59 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Cable Inte rface Line Cards and Network Uplink Cards Figure 3-40 Gigabit Ethernet Cable Management Step 6 If you ha ve compl eted all cable connections, go to the ne xt section, “Replacing the Front Co ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 132

    3-60 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Replacing the Fro nt Cover Replacing the Front Cover Use the following procedure to repl ace the front co ver on the chassis: Step 1 Slide the cov er onto the four corner po sts of the ch assis and then pu sh down s ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 133

    3-61 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Powering On the Syste m Powering On the System After all of the interfaces and other cables are connec ted, perform a visual check of all connections and then check that: • The ejector lev ers on each line ca rd ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 134

    3-62 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 10012 Software (UBR10K-P6-M), Released Version 12.2(1) Cop ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 135

    3-63 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Configuring the Cisco uBR10012 Rou ter at Startup Ti p If you hav e exper ience using Cisco routers, consider conf iguring t he router by using the p rocedure described in th e “Basic Conf iguration in Global Con ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 136

    3-64 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup Setting Up the Interface After you respond to the SNMP questions, the setup script lists the i nterfaces. The follo wing table lists typical interf aces found on a Ci ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 137

    3-65 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Configuring the Cisco uBR10012 Rou ter at Startup ! interface FastEthernet0/0/0 no shutdown media-type 100BaseX half-duplex ip address 172.27.48.209 255.255.0.0 ! end Step 7 Exit the setup script with out savin g, ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 138

    3-66 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Formatti ng PC Media Cards Formatting PC Media Cards The PC media card that shipped with your PRE co ntains the def ault Cisco IOS image for boo ting your router . This section explains ho w to format a PC media car ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 139

    CH A P T E R 4-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 4 Troubleshooting the Installation This chapter pro vides basic troubleshooting inf ormation to solve the most common installation problems with the Cisco uBR10012 uni v ersal broadband rout er . Y our Cisco uBR10012 router went through extensi v e t ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 140

    4-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting Methods Troubleshooting Methods This section descri bes the troubleshooting meth ods used in this chap ter and describes ho w Cisco uBR10012 routers are di vided i nto subsys tems for more ef f icient pr ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 141

    4-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting Installation Proble ms Troubleshooting Installation Problems This section contains general tr oubleshooting informatio n to help you solv e any problems y ou might encounter during the installation o f t ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 142

    4-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting Ether net Connections Troubleshooting Ethernet Connections If an Ethernet conn ection to your Cisco uBR10012 router fails to work properly , and the corresponding LNK (Link) LED is not illumi nated, chec ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 143

    4-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting th e Console Port Serial Connection – Be sure that the cable is not connected to an uplink port. • If the LNK LED is i lluminated (green ), but the Ethe rnet port does not seem to be working properly ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 144

    4-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Identifying Startup Problems • Check the LEDs on the PRE to make sure th at it is powered up properl y . • If the cable, connections, po wer , an d terminal sett ings all check ou t and you still cannot connect to t ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 145

    4-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 5. The initial system banner displays o n the console screen. If it is not displayed, see the “Connecti ng Network Management Cables” section on page 3-53 to verify that the ter m ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 146

    4-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem c. V erify if the UBR10-PWR-A C-PLUS= A C PEM show en vir onment command output displays a DC PEM module instead of A C PEM. Router# show environment Temperature information: Temperat ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 147

    4-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem Step 3 V erify if the UBR10-PWR-A C-PLUS= A C PEM is po wered on, and the V1 PO WER and V2 PO WER LEDs are illuminated (unless the y may not be w orking, as abov e). The A C po wer en ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 148

    4-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem c. The F A UL T LED should illuminate (yello w). If this LED is not illuminat ed, there could be a possibility th at the LED is not working, th erefore the LED cannot indicate a v al ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 149

    4-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 3.3v Normal 3.29v Fan: OK Power Entry Module 0 type AC status: OK // AC PEM is displayed // Power Entry Module 1 type DC status: OK T ry one of the follo wing: • Upgrade to a suppo ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 150

    4-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Troubleshooting the 2400 W AC-Input Power Shelf Check the follo wing to isolat e a problem to the A C -input po wer shelf. Step 1 Check to see which ve rsion of the PEM you ha ve in ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 151

    4-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Processor Subsystem Step 3 Check to see if the F A UL T LED is illuminated (yello w), if it is then: – Check that the ex ternal A C po wer source is supplying consistent A C v oltage at the proper ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 152

    4-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Step 3 V erify the Status LEDs o n the TCC+ card. a. Is the ST A TUS LED on the primary TCC+ on (solid green) in dicating that it is the primary card ? b. Is the ST A TUS LED on th ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 153

    4-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Lin e Cards 00:00:19:%ENVM-2-ENVCRIT:chassis outlet 1 measured at 30C/86F 00:00:19:%ENVM-2-ENVCRIT:chassis outlet 2 measured at 30C/86F Although an o ver -temperature conditio n is unlikely at initi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 154

    4-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the HHGE Installation b. If a port has been enabled b ut it s corresponding en abled LED is still off, reseat the line card in its slot (you do not ha ve to turn of f the sy stem powe r when removing or ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 155

    4-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the HHGE Insta llation The yello w F AIL LED blinks 1. The SFP GBIC has been rejected because: – An internal fault is detected. – Not a Gigabit Ethernet S FP . – Not a Cisco SFP . – T wo SFPs wi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 156

    4-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the HHGE Installation ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 157

    CH A P T E R 5-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 5 Maintaining the Cisco uBR10012 Router The Cisco uBR10012 uni versal broadb and router is conf igured t o your order and ready for inst allation when it arri ves. After you instal l the system, you may ha ve to perform specif ic maintenance procedur ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 158

    5-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Shutting Down the System Caution Cisco recommends that you create a duplicate PC media card that cont ains the curren t boot softw are image and th e current softw are conf iguration. Y ou can use the backup card to ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 159

    5-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the Front Cover Removing the Front Cover Use the follo wing procedure to rem o ve the front co ver from the chassis. Step 1 Remov e the co ver b y lifting it up sli ghtly and then pulli ng it ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 160

    5-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Air Filter Step 1 Slide the cov er onto the four corner po sts of the ch assis and then pu sh down so that the posts are seated in th e g ro oves ab ove t he cove r h ol es (s ee Figure 5-2 ). Figur e ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 161

    5-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing th e Air Filter Note The product order number for a r eplacement air f ilter is UBR10-F AN-FIL TER=. Use the following procedure to replace the air f ilter: Step 1 Remov e the front co ver (see “Remo vi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 162

    5-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the Fan Assembly Module Figur e 5-4 Air Filter Inser ted int o the Fr ont Cov er Step 5 Replace the front cover (see “Replacing the Front Cov er” ). Removing and Replacing the Fan Assembly ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 163

    5-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing DC Power Entry M odules If the failure LEDs—SINGLE F AN F AILURE and MUL TIPLE F AN F AILURE—are illuminated, remov e and reinsert the f an assembly module. If t he failure LEDs are stil ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 164

    5-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Connecting Alarm Ind icators If you did not conn ect the alarm indicators when yo u originally inst alled the Cisco uBR10012 chassis, use the follo wing procedure to connect an alarm in dicator to the system. Fo r s ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 165

    5-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Figur e 5-6 Alar m T er min al Block Connections Removing and Replacing AC PEM Modules The Cisco uBR10012 router ships with two A C po wer entry modu les (PEMs). In this redund ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 166

    5-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Note Y ou do not need to shut do wn the Cisco uBR10012 router to replace a red undant A C PEM. If you are replacing both A C PEMs, you can repl ace one, bring it online, and th ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 167

    5-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-7 Loosening the Captive Scr ews Step 6 Simultaneously pi v ot both eject or lev ers aw ay from each other to diseng age the PRE module from t he backplane (see Figur ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 168

    5-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Figure 5-8 Opening the Ejector Levers Step 7 Slide the PRE module o ut of the slot and pl ace it on an antistatic surface, or in an antistatic bag (see Figure 5-9 ). ALARM S CI ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 169

    5-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figure 5-9 Removing the PRE Modu le from the Chassis Step 8 If you are install ing a ne w or replacement PRE module, proceed t o the next step. Oth erwise, install a bl an k c ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 170

    5-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Replacing the PRE Module When replacing a PRE1 module with a PRE2 module, you must also install EMI gaskets and RF absorber material, for more information, go to the fol lowing ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 171

    5-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-1 1 Closing the Ejector Levers Step 5 When fully inserted, the PRE module c ycles through its p ower -on self-t est. The F AIL LED stays on briefly (about 5 to 6 se ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 172

    5-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Insta lling a PC Media Card Removing and Installing a PC Media Card Use the follo wing procedure to rem o ve and install a PC media card. Note The Cisco uBR10012 router uses PC media cards that are a m ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 173

    5-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing a nd Installing a PC Me dia Card Figur e 5-13 Removing the PC Media Card Step 3 Insert the ne w PC media card in to on e of the card slots on the PRE (see Figure 5-1 4 ). Figure 5-14 Inserting the PC Medi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 174

    5-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Timing, Communicatio n, and Control Plus Card Removing and Replacing a Timing, Communication, and Control Plus Card Use the follo wing procedure to install a ne w T iming, Communicat ion, a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 175

    5-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing a Timing, Co mmunication, and Control Plus Card Figur e 5-16 Removing the TCC+ car d Step 7 If you are install ing a replacement card, proceed to the ne xt step. Otherwise, install a bl ank ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 176

    5-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Timing, Communicatio n, and Control Plus Card Figure 5-1 7 Inserting the TCC+ Card Step 10 Secure the line card in the chassis by tighte ning the top and bottom capti v e scre ws (see Figur ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 177

    5-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Removing and Replacing a Network Line Card Use the follo wing procedure to in stall a ne w network li ne card, or to remov e or replace an e xisting network line card in ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 178

    5-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Figur e 5-18 Loosening the Captiv e Scr ews Step 3 If installing a ne w lin e card in a blank slot, remo ve the blank slo t cov er and discard. Othe rwise, disconnect th e ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 179

    5-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Figure 5-1 9 Opening the Ejector Levers Step 6 Slide the card out of the slot and place it on an an tistatic surf ace, or in an antistatic b ag (see Figure 5-20 ). 10349 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 180

    5-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Figure 5-20 Removing the Networ k Line Card Step 7 If you are installing a ne w or replacement card, proceed to the next step. Otherw ise, install a blank co ver ov er the ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 181

    5-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Installing the Network Line Card Note For proper cooling and airflo w , a blank card cover must alw ays be installed in a blank line card slot. The product order number ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 182

    5-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Step 3 Simultaneously pi v ot both eject or lev ers to ward each ot her (until the y are parallel to the f aceplate) to firmly seat the card in the backplane (see Figure 5 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 183

    5-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Step 5 When fully inserted, the ca rd cycles through its p ower -on self-test. The F ail LED stays on briefly (about 5 to 6 seconds) and ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 184

    5-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Ethe rnet Line Card an d the Slot Splitter Figur e 5-23 Captive Scr ew Locations Step 3 Loosen the top and bottom capti ve scre ws until they disengage and spring a w ay from the fa ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 185

    5-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Figure 5-24 Op ening the Ejector Levers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Alw ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 186

    5-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Ethe rnet Line Card an d the Slot Splitter Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist str ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 187

    5-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Step 4 Slide the splitter ou t of the slot ( Figure 5-26 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, ins ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 188

    5-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card This section descri bes how to install the line card in the Cisco uBR10 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 189

    5-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-27 Inserting the Slot Split t er Step 2 Grasp the front of the slot splitte r with one hand and place your other hand under the ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 190

    5-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 5-28 Captive Scr ew Locations Step 4 Secure the slot splitter to the chassis b y tightening the to p and bottom capti ve scre ws ( Figu ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 191

    5-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot spli ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 192

    5-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push t he line card into the splitter until you can feel it be ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 193

    5-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-31 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 194

    5-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing an SFP Module Removing and Replacing an SFP Module Y our HHGE line card is shipped with an SFP module inst alled. Use the procedures in this section if you need to change the SFP module: • ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 195

    5-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing an SFP M odule Figur e 5-33 Disconnecting the LC-type Fiber -Optic Cable Step 2 Disconnect the fiber -optic cabl e connector from the SFP module ( Figure 5-33 ). Note which cable connector p ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 196

    5-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing an SFP Module Step 3 Unlock and remov e the SFP module as follo ws: a. Mylar T ab SFP Modules—Gently , but f irmly pull the plastic tab to free the locking pin and remov e the SFP module ( ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 197

    5-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Upgrading to a Half-He ight Gigabit Ethernet Line Card Step 2 Gently insert the SFP module into th e line card port until the edge connector is fully seated in the connector . Y ou will hear a click as the triangu ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 198

    5-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Ti p T o prev ent alarms from acti vati ng, you must administrat i v ely shut do wn a cable interf ace line card before hot-swapping it . Otherwise, inform the net ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 199

    5-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Figure 5-36 Captive Scr ews, Ejector Lev ers Step 5 Simultaneously pi vot both ejector lev ers aw ay from each other to disengage the cable interface line c ard ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 200

    5-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Figure 5-37 Removing the Ca ble Interf ace Line Car d Step 7 If you are installing a ne w or replacement cable interface line card, proceed to the next step. Other ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 201

    5-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Installing a Cable Interface Line Card Step 1 Grasp the faceplate of the new cable interf ace line card with one hand and place your other hand under the card c ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 202

    5-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Figur e 5-39 Closing the Ejector Lev ers Step 4 Secure the cable interface line card in the chassis by tightening t he top and bottom capti ve screw s (see Figure ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 203

    5-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Step 6 Connect all downstream and upstream coaxial cable s to the cable interface line card as necessary . Step 7 Configure the cable interface line card if nec ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 204

    5-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 205

    A-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX A Technical Specifications This appendix pro vides speci fications i nformation about the Ci sco uBR10012 router , rou ter components, and cards used in the router . • Cisco uBR10012 Chassis and Chassis Components, page A-1 • Network Upl ink Cards and ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 206

    A-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components DC Power en try modules (PEM)— 34-1651-04, 34-1651-05 Pow er supply monitoring cable Supports two separate input feeds (–48 to –60VDC) by means of b uilt-in two -position ter ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 207

    A-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components A C Po wer entry modules (PEM) 34-1966-02 100—120 V A C operation is not supported Part Number: UBR10- PWR-A C (Primary) Part Number: UBR10- PWR-A C= (Spare) • Dimensions : Hei ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 208

    A-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components A C Po wer entry modules (PEM) 341-0387-01 100—120 V A C operation is not supported Part Number: UBR10- PWR-A C-PLUS (Primary) Part Number: UBR10- PWR-A C-PLUS= (Spare) • Dimen ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 209

    A-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components A C po wer shelf 2400W A C-input power shelf and DC PEM bund le UBR10-PWR-A C-EXT= • Chassis dimensions Height: 3.46 in. (87.9 cm) W idth: 19 in. (4 82.26 cm) Depth: 12.00 in. (3 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 210

    A-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components Fan assembly mod ule Part Number: UBR10-F AN-ASSY (Primary) Part Number: UBR10-F AN-ASSY= (Spare) • Product number (cable): UBR10-F AN-CAB= • Pow er consumption: 250 W 2 —4 a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 211

    A-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components LCD module Part numb er: module–UBR10-D SPL= Part number: cable–UBR10-DSPL-CAB= • Pow er consumption: 2W 2 (6.824 BTU 3 ) per hour • W eight: 0.4 lb (0.1814 kg) • Height: ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 212

    A-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Network Uplink Cards and Cable Interface Line Cards Network Uplink Cards and Ca ble Interface Line Cards Ta b l e A - 2 li sts the physica l specifications for th e cards used with the Cisco uBR10012 router . PRE PC media card ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 213

    A-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Network Uplink Cards and Cab le Interface Line Cards Cisco Half-Height Giga bit Ethernet line card • ESR-HH-1G E and ESR-HH-1GE= • Pow er consumption:15.98 W (54 .53 BTU 2 ) • W eight: 2 lb (0.9 kg) • Height: 7.8 in. ( ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 214

    A-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Network Uplink Cards and Cable Interface Line Cards Cisco OC12SML-DPT W AN line card • USB-SRP-OC12SML, USB-SRP-OC12SML= • Pow er consumption: 110 W 1 (375.3 BTU 2 ) • W eight: 6 lb (2.72 kg) • Height: 16 in. (40.64 c ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 215

    A-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Network Uplink Cards and Cab le Interface Line Cards Cisco uBR-MC3GX60V ca ble interface line card • UBR-MC3GX60V= • Pow er consumption: 246 W (839 BTU/hr) • W eight:11.6 l b (5.26 kg) • W idth: 1.38 in (3.50 cm) Heig ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 216

    A-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations SIP and SPA SIP and SPA Ta b l e A - 3 lists the SP As used with the Cisco uBR1001 2 router . T able A-3 SP A used with the Cisco uBR1 00 12 r outer Description Specifications Cisco Wideband SP A • Part Number: SP A-24XDS-S ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 217

    A-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications SIP and SPA 1-Port 10-Gigabit Ethernet SP A • Part Nu mber: SP A-1X10GE-L-V2 • Per port Bandwidth: 10 Gbp s • Number of ports: 1 • T otal Bandwidth: 10 Gbps • Po wer consumption: 25 • MTBF: 411, 892 hours SFP Modu ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 218

    A-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations SIP and SPA Ta b l e A - 4 lists the SIPs used with the Cisco uBR10012 router T able A -4 SIP used with the Cisco uBR1 00 12 r out er Description Specification Cisco W ideband SIP • Part Number : UBR10-2XDS-SIP • Pow er c ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 219

    B-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX B Cable Specifications This appendix pro vides the follo wi ng cabling and pinout i nformation for the Cisco uBR10012 rou ters. • Coaxial Ca bles, page B-1 • Console and Auxiliary Port Cables and Pinouts, page B- 2 • Fast Ethern et Port Cables and P ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 220

    B-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Console and Auxiliary Po rt Cables and Pinouts Note Any of the three of the coaxial cables listed can be used to connect a Cisco cable interface card to the HFC network ; howe v er , the consi stent use of 59-ser ies cable is pref ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 221

    B-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Console and Auxiliary Port Cables a nd Pinouts How to Identify an RJ-45 Rollover Cable Y ou can identify a rollov er cable by hol ding the two ends of t he cable next to each other , with the tab at the back. The wire connected t o ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 222

    B-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Console and Auxiliary Po rt Cables and Pinouts Console Port Cables and Pinouts Use the RJ-45-to-RJ-45 rollo ver cable and RJ-45-to -DB-9 female DTE adapter (labeled TERMIN AL) to connect the console port to a PC r unning terminal ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 223

    B-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Fast Ethernet Port Cables and Pino uts Fast Ethernet Port Cables and Pinouts The 10Base-T/100Base-TX Fast Ethe rnet ports support IEEE 802.3 and IEEE 802.3u spec ifications for 10-Mbps and 100-Mbps transmission over un shielded twi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 224

    B-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fast Ethernet Port Cab les and Pinouts Figure B-5 RJ-45 Crossov er Cable Identification How to Identify an RJ-45 Straight-Through Cable Y ou can identify a Straight-t hrough cable by comparing the two modula r ends of the cable. H ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 225

    B-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Connecting a Cable to a n RJ-45 Connector Figur e B-7 RJ-45 Straight-Thr ough Cable Identification Note If your cable was p urchased from Cisco Systems, pin 1 is white. Ta b l e B - 3 lists the pinouts for the tw o Fast Ethernet po ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 226

    B-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fiber-Optic Cables a nd Connectors Step 3 After arranging the wires in the correct order , cut them back so there is about 1/2 inch a vailable to i nstall in the connector . Step 4 Push the cable into th e connecto r so that the j ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 227

    B-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Fiber-Optic Cables and Con nectors War ni ng Class 1 laser product Statement 1008 War ni ng Class 1 LED product Statement 1027 Use a single-mode or multimode f iber -optic interf ace cable to connect your Cisco uBR10012 router to a ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 228

    B-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fiber-Optic Cables a nd Connectors Figure B-1 1 Attac hing Simplex or Duplex Fiber -Optic Cables 25168 SONET/SDH with simplex or duplex SC connectors To network Simplex RX TX Duplex ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 229

    C-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX C Frequency Allocation This appendix pro vides informati on on broad cast and cable television NTSC and P A L/SECAM standards and frequencies used around th e world. There are three standards for transmit ting video. They are defined b y the method of enc ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 230

    C-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation Standards Co mparisons Standards Comparisons The follo wing tables ( Ta b l e C - 1 , Ta b l e C - 2 , and Ta b l e C - 3 ) include data from Recommendation ITU-R BT .470.6, Con v entional T ele vision System s (1998) and pro vide ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 231

    C-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s NTSC Cable Television Channels and Relative Frequencies Ta b l e C - 4 provides information on the NTSC frequency map f or standard 6-MH z channels in North, Central, and Sou ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 232

    C-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Frequ encies 8 8 180.0-186.0 181.25 183.0 185.75 181.2625 185.7625 180.0090 184.5090 9 9 186.0-192.0 187.25 189.0 191.75 187.2625 191.7625 186.0093 190.5093 10 10 192.0-198.0 19 3.25 19 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 233

    C-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s PP 52 2 390.0-396.0 39 1.25 393.0 395.75 391.2625 395.7625 390.0195 394.5195 QQ 53 2 396.0-402.0 39 7.25 399.0 401.75 397.2625 401.7625 396.0198 400.5198 RR 54 402.0-408.0 40 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 234

    C-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Frequ encies 87 600.0-606.0 601.25 603.0 605.75 601.2625 605.7625 600.0300 604.5300 88 606.0-612.0 607.25 609.0 611.75 607.2625 611.7625 606.0303 610.5303 89 612.0-618.0 613.25 615.0 61 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 235

    C-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s 127 810.0-816.0 811.25 813.0 815.75 811.2625 815.7625 810.0405 814.5405 128 816.0-822.0 817.25 819.0 821.75 817.2625 821.7625 816.0408 820.5408 129 822.0-828.0 823.25 825.0 8 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 236

    C-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC (M) Cable Television Chan nel Frequencie s for Japan NTSC (M) Cable Television Channel Frequencies for Japan Japan uses NTSC (M) with different channel assignments. T able C-5 Japanese Channel Assignments Channel Number Bandw ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 237

    C-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC (M) Cable Television Channel Frequencie s for Japan C33 282.0-288.0 283.25 285.00 287.75 C34 288.0-294.0 289.25 291.00 293.75 C35 294.0-300.0 295.25 297.00 299.75 C36 300.0-306.0 301.25 303.00 305.75 C37 306.0-312.0 307.25 309 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 238

    C-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencie s for the Republic of Kor ea NTSC Cable Television Channel Frequencies for the Republic of Korea K orea uses NT SC (VHF , UHF) with dif ferent channel assignments. T able C-6 Korean Chann ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 239

    C-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Chann el Frequ encies fo r the Republic of Korea 14 120.0-126.0 121.25 123.0 125.75 CA TV 15 126.0-132.0 127.25 129.0 131.75 16 132.0-138.0 133.25 135.0 137.75 17 138.0-144.0 139.25 141.0 143.75 18 144.0-150. ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 240

    C-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencie s for the Republic of Kor ea 32 1 270.0-276.0 271 .25 273.0 275.75 CA TV 33 1 276.0-282.0 277 .25 279.0 281.75 34 1 282.0-288.0 283 .25 285.0 287.75 35 1 288.0-294.0 289 .25 291.0 293.75 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 241

    C-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Chann el Frequ encies fo r the Republic of Korea 67 480.0-486.0 481.25 483.0 485.75 CA TV 68 486.0-492.0 487.25 489.0 491.75 69 492.0-498.0 493.25 495.0 497.75 70 498.0-504.0 499.25 501.0 503.75 71 504.0-510. ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 242

    C-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL/SECAM Cable Television Chann els and Relative Frequencies PAL/SECAM Cable Television Channels and Relative Frequencies Ta b l e C - 7 provides information on t he Phase Alternating Line (P AL) a nd SEquential Couleur A vec Me ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 243

    C-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL/SECAM Cable Television Chann els and Relative Frequencies S4 125.0-132.0 126.25 131.75 S5 132.0-139.0 133.25 138.75 S6 139.0-146.0 140.25 145.75 S7 146.0-153.0 147.25 152.75 S8 153.0-160.0 154.25 159.75 S9 160.0-167.0 161.25 1 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 244

    C-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL/SECAM Cable Television Chann els and Relative Frequencies S31 382.0-390.0 383.25 388.75 S32 390.0-398.0 391.25 396.75 S33 398.0-406.0 399.25 404.75 S34 406.0-414.0 407.25 412.75 S35 414.0-422.0 415.25 420.75 S36 422.0-430.0 4 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 245

    C-17 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL/SECAM Cable Television Chann els and Relative Frequencies 45 662.0-670.0 663.25 668.75 46 670.0-678.0 671.25 676.75 47 678.0-686.0 679.25 684.75 48 686.0-694.0 687.25 692.75 49 694.0-702.0 695.25 700.75 50 702.0-710.0 703.25 7 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 246

    C-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People ’s Republic of China PAL SECAM (D/K) Cable Television Channel Frequencies for the People’s Republic of China Note The downstream frequency plan in cludes al ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 247

    C-19 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People’s Republic of China Z22 336.0-343.0 336.25 342.75 Z23 344.0-351.0 344.25 350.75 Z24 352.0-359.0 352.25 358.75 Z25 362.0-367.0 362.25 366.75 Z26 368.0-375.0 368 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 248

    C-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People ’s Republic of China DS27 623.0-630 .0 623.25 629.725 DS28 631.0-638 .0 631.25 637.75 DS29 639.0-646 .0 639.25 645.75 DS30 647.0-654 .0 647.25 653.75 DS31 655 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 249

    D-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX D Manufacturers for Hardware Components Ta b l e D - 1 and Ta b l e D - 2 provide contact informatio n for manufacturer s, web sites, and product of ferings required to prepar e and provisio n a Nort h American cable headend site for two- way data. Ta b l ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 250

    D-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents North American Ch annel Plans In addition, Cisco recommends the foll owing man ufacturers, web sites, and product of fering s for v arious measurement de vices you will need to prepare and pr ovision a North Amer ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 251

    D-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Manufacturers for Hardware Componen ts European Channel Plans European Channel Plans In addition, Cisco recommends the foll owing manufactur ers, w eb sites, and product of ferings for v arious measurement de vices you will need to prepare and pr ovisi ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 252

    D-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents Cable Kits and Tools Cable Kits and Tools T ab le D-4 Manu f actur ers for Eur ope an Headend Measurement Devices Manufacturer Web Site or Phone Number Products/Model Digital Signal Level Meters/QAM Analy sers Ac ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 253

    D-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Manufacturers for Hardware Componen ts External AC-Input Power Shelves External AC-Input Power Shelves T able D-6 AC-input P o we r Shelves M anuf actur es Manufacturer Web Site or Phone Number Products/Model Lineage 1 1. For ordering, visit www.arrow. ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 254

    D-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents External AC-I nput Power Shelves ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 255

    GL-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 GLOSSARY S ymbols 1+1 APS See APS . 10Base-T 10 -Mbps baseband Ethernet specif ication using t wo pair s of twist ed-pair cabling (Cate gory 3, 4, or 5): one pair for transmitting data and the other for rece i ving data. 10Base-T , which is part of th e IEEE 802 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 256

    Glossary GL-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 A AAL A TM ada ptation layer . Service-depe ndent sublaye r of the data link layer . The AAL accepts data from dif ferent ap plications and present s it to the A TM layer in the form of 4 8-byte A TM payload segmen ts. AALs consist of tw o sublayers:the ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 257

    Glossar y GL-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 B Backplane The circuit board at the back of the chassis that all component s plug into. It provides the physical connection between an interface processor or line car d, and the data and po wer di stribut ion buses insi de a chassis. Bellcore Bell Com ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 258

    Glossary GL-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 CO Central off ice. The local telephone comp any of f ice to which all lo cal loops in a gi ve n area connect and in which circuit switchi ng of subscriber lines occurs. Command Line Interface See CLI . Console Data terminal equipment (DTE) through whic ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 259

    Glossar y GL-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 E E1 W ide-area digital transmissio n scheme used predominantl y in Europe that carries data at a rate of 2.048 Mbps. E1 lines can be leased for priv ate use from common carriers. Compare with T1; see also DS1. Edge Servic es Router See ESR . Electroma ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 260

    Glossary GL-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Frame Relay Industry-stan dard, switched data li nk layer protocol t hat handles multiple virtual circuits usi ng HDLC encapsulation between connected de vices. Frame Rela y is more ef fici ent than X.25, the protocol for which it is g enerally cons ide ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 261

    Glossar y GL-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 IOS Internet Operating System. See Cisco IOS . IP Internet Protoc ol. Network layer protoco l in the TC P/IP s tack offering a co nnectionless internetwork service. IP provides features for addressing, type-of-service sp ecificatio n, fragmentation and ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 262

    Glossary GL-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 M M13 Generic term for equipment that multiple xes DS1s into DS3s. Somet imes used to describe a specific DS3 multiplex format. Some standards use this term to describe a synch ronous multiple xing format also kno w as SYNTRAN. In many cases M13 does no ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 263

    Glossar y GL-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Multicast Single packets copied b y the netw ork and sent to a s pecific subset of network addre sses. These addresses are specified in the Destin atio n Address fi eld. Compare with Broadcast and Unicast . Multilink Point-to-Point See MLP . Multimode ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 264

    Glossary GL-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Optical carrier See OC . Optical fiber See Fiber-op tic cable . P Packet Logical grouping of information that incl udes a header containing contro l information and (usuall y) user data. Packets are most often used to refer to network layer units of da ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 265

    Glossar y GL-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 PRE Performance routing engi ne. The central routing unit for th e Cisco uBR10012 uni ve rsal broadband router . The PRE performs all La yer 2 and Layer 3 pack et manipu lation rel ated to routing and forwarding thro ugh the Cisco uBR10012 routers. Us ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 266

    Glossary GL-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 S SAR Segmentation an d reassembly . One of the two sublayers of the A AL common part con v er gence sublayer , responsible for dividing (at the source) and reassembling (at the destin ation) the protocol data units (PDUs) passed from the con ver gence ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 267

    Glossar y GL-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T3 Digital W AN carrier facility . T3 transmits DS3-format ted data at 44.736 Mbps through th e telephone switching network. TAC A Cisco T echnical Assistance Cente r . There are four T A Cs worldwide. TACACS T erminal Access Controller Access Cont ro ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 268

    Glossary GL-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 U UBR See Univ ersal Br oadband Rou ter . Unchannelized DS3 See C lear channel DS3 . Unicast A message sent to a single network destinati on. Compare with Broadcast and Multicast . Universal Broadband Router A Cisco Cable Modem T ermination System (CMT ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 269

    Glossar y GL-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Wide-area network See WA N . WRED W eighted Random Early Detectio n. RED uses an algo rithm to random ly discar d packets.The result of the drop is that the source detects the d ropped traf f ic and slows its transmission. WRED combines the capabiliti ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 270

    Glossary GL-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 271

    IN-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 INDEX Numerics 1000Base-LX/LH 1-31, A-8, A-9 1000BASE-SX A-9 1000Base-SX 1-31, A-8 1000Base-ZX 1-31, A-8, A-9 10BASE-T RJ-45 connector pinout s (table) B-7 A AC-input power shelf installati on 3-3 installing after installi ng the main chassis 3-15 AC PEM descrip ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 272

    Index IN-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 C cable length, factors determining 2-10 cable management brackets, installing 3-13 cables attaching optional cable man agement brackets 3-13 simplex or duplex fiber-opt ic cables (figure) B-10 auxiliary port B-4 Category 3 or 5 UT P RJ-45 B-5 console port ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 273

    Index IN-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Ethernet port on PRE mo dule 1-22 fan assembly module 1-34 features 1-7 front view with front cover(figure) 1-8 front view withou t front cover (figure) 1-9 functional overview 1-3 general rack-mounti ng guidelines 3-3 Gigabit Ethernet line card 1-29 groun ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 274

    Index IN-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 OC-12 POS 1-31 optical SC-type (simplex an d duplex) 1-34 RJ-45 3-64 console port, PRE1 module 3-61 cables B-4 configuring the attached terminal 3-51 DB-9 connecto r 3-51 pinouts B-4 problems 4-5 system banner display 4-7 troubleshooting 4-5 console port, ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 275

    Index IN-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 F faceplate Cisco OC-12 POS (figure) 1-32 Cisco TCC+ card (figure) 1-25 gigabit Ethe rnet (figure) 1-30 PRE1 module (figure) 1-21 PRE2 module (figure) 1-21 fan assembly module airflow 2-6 airflow cautions 3-3 description 1-34 multiple or single fan failure ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 276

    Index IN-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 requirements 2-7 specifications A-1 I inserting cable interface line card (figure) 3-41, 5-45 GBIC (figure) 3-57 network line card (fi gure) 5-25 PC media card (figure) 5-17 PRE module in the chassis (figure) 5-14 the TCC+ card (figure) 5-20 installing 5-1 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 277

    Index IN-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 captive screws on the PRE1 mod ule (figure) 5-11 ground lug connector s (figure) 3-22 M manufacturers European he adend provisio ning requirement s (table) D-3 North American head end provisioning requ irements (table) D-1 media cards formatting 3-66 memor ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 278

    Index IN-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Performance Routing Engine, see PRE module physical description 1-7 pinouts auxiliary port B-4 console port B-4 Fast Ethernet port B-5 plant wiring guidelin es 2-9 ports Fast Ethernet port on active PRE 1-12 gigabit Ethernet GBIC 1-29 OC-12 POS SC connecto ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 279

    Index IN-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 S safety guidelines 2-1 electricity 2-4 lifting the chassis 2-3 preventing electrostatic d ischarge damage 2-2 translated warnings 1-iv SECAM frequency allocatio n C-14 standard, description C-1 setup command 3-65 setup facility 3-61 SFP module inserting 5 ...

  • Cisco Universal Broadband Router Cisco uBR10012 - page 280

    Index IN-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 terminal server connections 3-61 terms and acrony ms 1-v Timing, Communi cation, and Control Plu s card, see TCC+ card tools and suppli es connecting DC power 3-35, 3-36, 3-50 connecting groun d 3-20 for maintenance and replacin g modules 5-2 transmission ...

Manufacturer Cisco Category Network Router

Documents that we receive from a manufacturer of a Cisco Universal Broadband Router Cisco uBR10012 can be divided into several groups. They are, among others:
- Cisco technical drawings
- Universal Broadband Router uBR10012 manuals
- Cisco product data sheets
- information booklets
- or energy labels Cisco Universal Broadband Router Cisco uBR10012
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Universal Broadband Router Cisco uBR10012.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Universal Broadband Router Cisco uBR10012, service manual, brief instructions and user manuals Cisco Universal Broadband Router Cisco uBR10012. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Universal Broadband Router Cisco uBR10012.

Similar manuals

A complete manual for the device Cisco Universal Broadband Router Cisco uBR10012, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Universal Broadband Router Cisco uBR10012 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Universal Broadband Router Cisco uBR10012.

A complete Cisco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Universal Broadband Router Cisco uBR10012 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Universal Broadband Router Cisco uBR10012, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Universal Broadband Router Cisco uBR10012, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Universal Broadband Router Cisco uBR10012 - which should help us in our first steps of using Cisco Universal Broadband Router Cisco uBR10012
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Universal Broadband Router Cisco uBR10012
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Universal Broadband Router Cisco uBR10012 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Universal Broadband Router Cisco uBR10012?

Use the form below

If you did not solve your problem by using a manual Cisco Universal Broadband Router Cisco uBR10012, ask a question using the form below. If a user had a similar problem with Cisco Universal Broadband Router Cisco uBR10012 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)