English dropdown-ico

Manual TVS electronic RP-35

19 pages 0.56 mb
Download

Go to site of 19

Summary
  • TVS electronic RP-35 - page 1

    All specifications are subject to change without notice Mini Dot Impact Printer MODEL : Jus’ Bill RP-35 ...

  • TVS electronic RP-35 - page 2

    ...

  • TVS electronic RP-35 - page 3

    2 1. Features 3 2. Specification 4 3. Self T est 6 4. User Switches 7 5. Command List 8 5.1. EMULA TION EPSON TM-U200 8 5.2. EMULA TION CITIZEN iDP-3540 9 5.3. EMULA TION ST AR SP200 10 6. Interface 1 1 6.1. Interface Connector 1 1 7. Cash Drawer Connector 13 8. Electrical Specifications 14 9. Dip Switch Settings 15 T able of Contents ...

  • TVS electronic RP-35 - page 4

    3 ♣ Di p Switch Configuration Emulation mode, communications mode, baud rate , serial/parallel handshak e , and head printing characteristics are all configured through dip switch settings . ♣ Data Buffer T he Jus' Bill RP-35 printer has a built-in 16 Kilobyte I/O buffer allowing the host computer to free itself after sending the print dat ...

  • TVS electronic RP-35 - page 5

    4 MODEL Jus' Bill RP-35 PRINT METHOD 9-pin serial impact dot matrix PRINT DIRECTION Bi-directional (with logical seeking) NO . OF COLUMNS Epson Mode : 42/35, 40/33, Star Sp200 : 42/35 Other Modes : 40/32 FONT SIZE 7 x 9, 9 x 9 dots LINE SP ACING n/144 inch PRINTING WIDTH 63.5mm (2.5”) PRINT SPEED 5 Line / Sec (at 40 cpl) INK RIBBON EPSON , E ...

  • TVS electronic RP-35 - page 6

    5 Overall dimension ...

  • TVS electronic RP-35 - page 7

    6 While pressing the paper feed switch for more than 10 seconds after the printer in turned on, the self test mode is initiated. T he printer self test includes a listing of the current default settings , read and write test of internal RAM, checksum test of internal program memory , loop back detection statement, a staggered dot line , a few lines ...

  • TVS electronic RP-35 - page 8

    7 Panel Switches P aper F eed button : Pressing the PF button momentarily will advance the paper one character line and pressing it continuously will cause a fast feed at 15 lines per second. Power Switch A P ower switch located on the lower left side of the printer is used to turn the printer on/off . Indicators T his section explains the differen ...

  • TVS electronic RP-35 - page 9

    8 5.1. EMULATION EPSON TM-U200 Command Hex Code Description HT <09>H Horizontal tab LF <0A>H Print and line feed CR <0D>H Carriage Return DLE EO T <10>H<04>H<n> Real-time status transmission DLE ENQ <10>H<05>H<n> Real-time request to printer ESC SP <1B>H<20>H<n> Set right-side ...

  • TVS electronic RP-35 - page 10

    9 5.2. EMULATION CITIZEN iDP-3540 Command Hex Code Description BEL <07>H Drive pulse setting command for 1st drawer CAN <18>H Clear data in buffer LF <0A>H P aper feed FF <0C>H<n> P aper feed n lines CR <0D>H Print command SO <0E>H Select expanded character mode SI <0F>H Select normal character mode D ...

  • TVS electronic RP-35 - page 11

    10 5.3. EMULATION STAR SP200 Command Hex Code Description BEL <07>H Differed drive command “ A ” for peripheral unit (Default setting) CAN <18>H Cancel print data in buffer LF <0A>H Line feed CR <0D>H Line feed (same as LF) SO <0E>H Select expanded character mode SI <0F>H Cancel expanded character mode FS < ...

  • TVS electronic RP-35 - page 12

    11 6-1. Interface Connector <D-SUB 25 F emale Serial> <Centronics P arallel> <USB “B” T ype> <Ethernet> <USB COMBO> <Wi-fi> Serial Interface PIN SIGNAL I/O DESCRIPTION 2 TXD Output Printer transmit data line RS-232C level 3 RXD Input Printer receive data line RS-232C level 4, 20 DTR Output Printer handshake t ...

  • TVS electronic RP-35 - page 13

    12 Centronics P arallel Interface PIN SIGNAL I/O DESCRIPTION 1 STROBE- Input Synchronize signal Data received 2~9 DA T A0~7 Input/Output Data bit T ransmitted 0~7 10 A CK- Output Data receiving completed. 11 B USY Output Impossible to print of data receiving. 12 PE Output P aper empty 13 SELECT Output Printer status for ON/OFF line 14 A UT O FEED- ...

  • TVS electronic RP-35 - page 14

    13 T he Jus' Bill RP-35 can operate two cash drawers with a 6 pin RJ-11 modular connector . T he driver is capable of supplying a maximum current of 1.0A for 510 ms or less , when not printing. <Cash Drawer Connector> PIN SIGNAL DESCRIPTION 1 Signal GND - 2 Drawer kick-out drive signal 1 Output 3 Drawer open/close signal Input 4 +24V - 5 ...

  • TVS electronic RP-35 - page 15

    14 T he Jus' Bill RP-35 requires a power supply with the following parameters . A linear power Adapter is included in the Jus' Bill RP-35 box. P ower Supply V oltage : 24VDC±10% P ower Supply Current : 2.5 A <P ower Supply Connector> 8. Electrical Specifications ...

  • TVS electronic RP-35 - page 16

    15 T his table gives the definition for the DIP switch settings . Function Setting SW1 1 2 3 4 5 6 7 8 S E R I A L Emulation Epson TM-U200 Epson TM-U300 Citizen iDP3540 Star SP200 OFF ON OFF ON OFF OFF ON ON ········ CR Character CR=CR Only CR=CR + LF OFF ON CPL 40/33 Char/Line 42/35 Char/Line OFF ON Auto Cutter Not Install Install OFF ON 2 ...

  • TVS electronic RP-35 - page 17

    16 Function Setting SW1 1 2 3 4 5 6 7 8 P A R A L L E L Emulation Epson TM-U200 Epson TM-U300 Citizen iDP3540 Star SP200 OFF OFF ON ON OFF ON OFF ON CR Character CR=CR Only CR=CR + LF OFF ON CPL 40/33 Char/Line 42/35 Char/Line OFF ON Auto Cutter Not Installed Installed OFF ON 2 Color Not Installed Installed OFF ON Journal Not Installed Installed OF ...

  • TVS electronic RP-35 - page 18

    17 ...

  • TVS electronic RP-35 - page 19

    Rev . 1.0 ...

Manufacturer TVS electronic Category Printer

Documents that we receive from a manufacturer of a TVS electronic RP-35 can be divided into several groups. They are, among others:
- TVS electronic technical drawings
- RP-35 manuals
- TVS electronic product data sheets
- information booklets
- or energy labels TVS electronic RP-35
All of them are important, but the most important information from the point of view of use of the device are in the user manual TVS electronic RP-35.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TVS electronic RP-35, service manual, brief instructions and user manuals TVS electronic RP-35. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TVS electronic RP-35.

Similar manuals

A complete manual for the device TVS electronic RP-35, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TVS electronic RP-35 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TVS electronic RP-35.

A complete TVS electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TVS electronic RP-35 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TVS electronic RP-35, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TVS electronic RP-35, that we can find in the current document
3. Tips how to use the basic functions of the device TVS electronic RP-35 - which should help us in our first steps of using TVS electronic RP-35
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TVS electronic RP-35
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TVS electronic RP-35 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TVS electronic RP-35?

Use the form below

If you did not solve your problem by using a manual TVS electronic RP-35, ask a question using the form below. If a user had a similar problem with TVS electronic RP-35 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)