-
TP-Link TL-SC3171 - page 1
TL-SC3171 Day/Night Surveillance Camera Rev: 1.0.0 1910010291 ...
-
TP-Link TL-SC3171 - page 2
COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registe red trademark of TP-LINK TECHNOLOGIES CO., L TD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificatio ns ma y be reproduced in any form or by any means or used to make any deriva ...
-
TP-Link TL-SC3171 - page 3
FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim its are designed to pro-vi de reasonable protection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy and, ...
-
TP-Link TL-SC3171 - page 4
CONTENTS Package Co ntents............................................................................................................... .......... 1 Chapter 1 Mini mum System Requirement s ............................................................................. 2 Chapter 2 Physical Overvie w .................................................. ...
-
TP-Link TL-SC3171 - page 5
6.3 Networ k ..................................................................................................................... 33 6.3.1 Informat ion ........................................................................................................... 34 6.3.2 PPPoE (Poin t-to-Point Prot ocol over Ethernet) ................................ ...
-
TP-Link TL-SC3171 - page 6
1 Package Content s The follow items should be found in your package: ¾ TL-SC3171 Day/Night Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Other helpful information ) Note: Make sure that the p ...
-
TP-Link TL-SC3171 - page 7
2 Chapter 1 Minimum System Requirement s We strongly recommend your computers follow our minimum requirements in order to use this IP-Camera normally . If your computer doesn’t m eet these requirements below , it might cause some problems. Item Requirement s CPU Pentium 4 1600MHz (or equivalent AMD) Graphic Card 64 MB RAM graphic cards(or equival ...
-
TP-Link TL-SC3171 - page 8
3 Chapter 2 Physical Overview 2.1 Front View Figure 2-1 Focus Adjustment Ring : Adjust the focus to get a clear image. Built-in Microphone : Built-in microphone for two-way audio. 2.2 Bottom view Figure 2-2 Wireless Antenna : For connection of IEEE 802.1 1b/g wireless network. Audio In : T o support audio in with Microphone for two way audio. Audio ...
-
TP-Link TL-SC3171 - page 9
4 then press and hold the Reset Button for at least 10 seconds. T he CPU of the camera starts to work completely 1 minute after you release the Reset button. I/O T erminal Connector : Input/Output to support External Alarm and Sensor used for motion detection, event triggering and alarm notification, etc. Network Connector : For connection to the E ...
-
TP-Link TL-SC3171 - page 10
5 Chapter 3 Using IP Camera via Web Browser 3.1 Obain the IP Address 1. Insert the provided CD into your CD-ROM driver . The Setup Wizard will automatically pop up on your computer ’s screen as shown in the figure below . Figure 3-1 2. Choose the Intelligent IP Inst aller , and then the next screen appears. Clicjk on Intelligent IP Inst aller to ...
-
TP-Link TL-SC3171 - page 11
6 Figure 3-2 3. After the inst allation is finished, click St art > Program Files > TP-LINK >Intelligent IP Inst aller to start using the program. Figure 3-3 4. The following screen will then display . Click the Search button to search Network Cameras in the network; it displays Network Came ras information including IP Address. ...
-
TP-Link TL-SC3171 - page 12
7 Figure 3-4 3.2 Windows W eb Browser 1. Click Link to IE button in Figure 3-4 or launch your web br owser , and en ter the IP address (obtain from Figure 3-4) of the IP camera in the Location / Address field of your browser . ) Note: 1) For the first time login wi th IE, you will need to enable “ Download signed ActiveX controls ”. Please go t ...
-
TP-Link TL-SC3171 - page 13
8 Figure 3-5 ) Note: The default User name “admin” and Password “admin” are set at the factory for the administrator . Y ou can change them in the A ccount Menu. (P lease check “ SETTING → BASIC → Securit y → Account ”) 3. The web-based managem ent page will display on y our screen. On the lef tmost column of the web-based managem ...
-
TP-Link TL-SC3171 - page 14
9 3.3 Mac Web Browser 1. Click the Safari icon on the screen as the figure below s hown, and enter the IP address of the IP camera (which can be obt ained from Figure 3-4) in the Lo cation / Address field of your browse r . ) Note: If you only want to view the video wit hout setting page, enter “http://<IP>/index2.htm” as your web URL. Fo ...
-
TP-Link TL-SC3171 - page 15
10 2. Enter the default User na me “admin” and passw ord “admin” in the dialog box as shown below . Figure 3-8 ) Note: The default Name “admin” and Password “admin” are set at the factory for the administrator . Y ou can change them in the Acc ount Menu (Pl ease check “ SETTING → BAS IC → Security → Account ”). ...
-
TP-Link TL-SC3171 - page 16
11 3. The web-based manage ment page will be display on your screen. In the leftmost column of the web-based manage ment page are Setting , Client Setting , and Image Setup . For more details, you can refer to Section 5.2 、 Section 5.3 and Section 5.4 . Figure 3-9 ...
-
TP-Link TL-SC3171 - page 17
12 Chapter 4 Using IP Camera via Mobile Phone Y ou can use TP-LINK Web User Interface via mo bile phones. T o use IP cameras via mobile phones, please make sure your R TSP is set to “On” (Default is “ On”). T o change the settings of IP cameras, Please check “Settings → Basic → Camera → General.” Up to the 15 th August, it has bee ...
-
TP-Link TL-SC3171 - page 18
13 ) Note: Y ou can also use RTSP clients (RealPlayer , VLC, Qu ickT ime Player etc) to view RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp ” as the Player URL. Below is an example of viewing the came ra in 3G streaming mode on NOKIA N76: 1. Click Function and select Gallery . 2. Click the Streaming links . 3. Click Opti ...
-
TP-Link TL-SC3171 - page 19
14 5. Open with Real-Player and click Ye s to connect. 4.2 3G Web Brower Mobile V i ew Mode For 3G Web Browser Mobile V iew Mode, pleas e type “http://<IP> ” into your 3G Mobile’s W eb Browser . <IP> is the Public IP address of your IP camera (the default value is 192.168.1.100); For Example: rtsp://192. 168.1.100:554/video.3gp Be ...
-
TP-Link TL-SC3171 - page 20
15 3. Enter name and p assw ord. Default values are both admin. Then click Log in 4. The TP-LINK User Interface and live image will show up in the middle of the screen. ) Note: It will show continuous snapshot s not a real time video streaming. T herefore, the recording feature is disabled. ...
-
TP-Link TL-SC3171 - page 21
16 4.3 2.5G W A P Browser Snap shot Mode For 2.5G W AP Browser Snapshot M ode, please type “<IP>/mobile.wml ” into your 2.5G WAP Browser . <IP> is the IP address of your IP camera, which can be obtained from Figure 3-4. 4.4 2.5G W eb Browser Snapshot Mode For 2.5GWeb Browser Snap shot M ode, please type “<IP>/mobile.htm ” ...
-
TP-Link TL-SC3171 - page 22
17 3. Click Setting I and select protocol with TCP . 4. Click Setting II and select System Settings . 5. Click OK and connect to IP Camera. ...
-
TP-Link TL-SC3171 - page 23
18 T o use IP Camera via Opera Mobile with Windows M obile Smart Phone, please take the following steps: 1. Download the ” Opera Mobile 9.5.cab “ and copy to Windows Mobile 6 Smart Phone. 2. Click the “ Windows Explorer ” to find the download cab file. 3. Click the cab file to install the Opera Mobile 9.5. 4. Click Programs to find the Oper ...
-
TP-Link TL-SC3171 - page 24
19 5. T ype IP or http url link. 6. T ype the username and password or setup authentication off in Setting > Basic > Security > Account . ...
-
TP-Link TL-SC3171 - page 25
20 Chapter 5 Configuration of Main Menu You would find that the illustrative web pages in this Manual are all orange. Please note that they're from our latest firmware, which can be downloaded fro m our website. Web pages in our previous firmware are blue. On the leftmost column of t he web-based management page are Setting , Client Setting , ...
-
TP-Link TL-SC3171 - page 26
21 5.1.2 Zoom in / out the image via the monitor window z Click to display the digital zoom in window . z Pull the to adjust the digital zoom range, and it will be showed on the above windo w . z Y ou can use the left click of your mouse to mo ve the to any where on the window to view the desired detail more clearly . 5.1.3 V ideo play buttons Symb ...
-
TP-Link TL-SC3171 - page 27
22 Microphone turned off V olume control bar 5.2 Setting This function is only for the Ad ministrator . Click this button to get into the Basic and Advance settings menus. There are four sub-menus under the BASIC menu, which includes Sy stem , Camera , Network , and Security . For more information, you can refer to Section 6.1 System , Section 6.2 ...
-
TP-Link TL-SC3171 - page 28
23 Click this button to configure the settings of IP Camera, which includes Mode , View Si z e , Protocol , and Video Buffer . 5.3.1 Mode Click the drop-down list to choose MPEG4 , MJPEG and JPEG video compression mode. ) Note: MJPEG streaming is unavailable if RTSP mode is On (Please check SETTING → BASIC → Camera → General ). 5.3.2 V iew Si ...
-
TP-Link TL-SC3171 - page 29
24 General ). 5.3.4 V ideo Buffer T urn the Video Buffer function ON / OFF . The V ideo Buffer function makes the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing. 5.4 Image Setup Y ou can use the tool bar to optimize video Brightness , Contrast, Saturation and Hue . 5.4.1 Brightness The higher ...
-
TP-Link TL-SC3171 - page 30
25 Chapter 6 Setting-BASIC Click BASIC to display the submenus including System , Camera , Network , and Security . 6.1 System Click Sy stem to display the submenus including Information, Date/Time , and Initialize . 6.1.1 Information The Information page provides the basic information of the product which includes Product Name, Firmware V ersion a ...
-
TP-Link TL-SC3171 - page 31
26 6.1.2 Date/T ime The Date/Time p age displays all options of time setting. ¾ Current date/time : Displays the current date and time of this IP Camera. ¾ PC clock : Displays the date and time of the monitoring PC clock. ¾ Date/time format : Y ou can click the drop-down list to sele ct dif ferent time display formats. ¾ Adjust : Y ou can selec ...
-
TP-Link TL-SC3171 - page 32
27 ) Note: The NTP server (Network T ime Protocol) is the ti me server whi ch is an Internet standard protocol built on the top of TCP / IP . This assures accura te synchronization to t he millisecond of computer clock time in a network of computers. z Time zone : Y ou can select the format from Greenw ich Mean Time. The time displayed will be the ...
-
TP-Link TL-SC3171 - page 33
28 applied immediately . The def ault language is “English”. 6.2 Camera Click Camera to display the submenus including General , MPEG4 and MJPEG . 6.2.1 General ¾ RTSP : Switch is On or Of f z RTSP Port : S pecify the transmission port number of RT SP streaming. The default value is 554. z Port Range : S pecify the transmission port range of R ...
-
TP-Link TL-SC3171 - page 34
29 randomly from this range. ) Note: RTSP (Real T ime S treaming Protocol ) is a protocol used in streaming media system which allows client s to remotely control a streaming video server . RTSP is supports by most of the media clients such as Real Player , QuickT ime and VLC...etc. ¾ Image rot ated : Y ou can mirror or flip the display screen. ¾ ...
-
TP-Link TL-SC3171 - page 35
30 3) Viewer Authentication: If the viewer authentication is On , the users will be requested to type in username and password when viewing through RTSP . 4) Multicast Streaming (If it is ON) z Multicast address : S pecify the multicast server ad dress. z Video/Audio port : S pecify the transmission port number of the video data, which is an even n ...
-
TP-Link TL-SC3171 - page 36
31 B. Mobile Vie w If RTSP is On (see Setting → Basic → Camera → General), the scr een will display as shown below . ¾ Vie w er Authentication: If the viewer authentication is On , the users will be requested to type in username and password when viewing through RTSP . ¾ Multicast Streaming (If it is On) z Multicast Address : S pecify the m ...
-
TP-Link TL-SC3171 - page 37
32 through. 8) Image Size : The image size of Mobile View is fixed at 160 x 120. 9) Frame Rate : Set the frame rate of the MPEG4 image. Y ou can choose values fr om 5, 10fps. The unit “fps” stands for “frames sent per second”. 10) Quality : z Auto : The quality and bitrate will be adjusted automatica lly according to the frame rate. z Fixed ...
-
TP-Link TL-SC3171 - page 38
33 If RTSP is Off (see Setting → Basic → Camera → General), the screen will display as show n below . 11) Image Size : S pecify the image size when the networ k camera transmits. Y ou can choose among 640 x 480, 320 x 240, and 160 x 120. 12) Frame Rate : Set the frame rate of the MJPEG image. Y ou c an choose val ues from 1, 2, 3, 4, 5, 7, 10 ...
-
TP-Link TL-SC3171 - page 39
34 6.3.1 Information The page of Information displays the MAC addres s of the device. 14) Obt ain an IP address automatically (DHCP) : (If a DHCP server is installed on the network) Select this, the IP will be assigned by the DHCP serve. 15) Obt ain DNS server address autom atically : Select this to obt ain the address of DNS server automatically . ...
-
TP-Link TL-SC3171 - page 40
35 16) Use the following IP address : Select this when the fixed IP address is set. z IP address : Enter the IP address of the device. z Subnet mask : Enter the subnet mask. z Default gatew ay : Enter the default gateway . 17) Use the following DNS server address : Select this when you set the fixed IP address as the IP address of DNS server . z Pr ...
-
TP-Link TL-SC3171 - page 41
36 6.3.2 PPPoE (Point-to-Point Protocol over Ethernet) If your ISP provi des Dynamic IP with authentication by username and password, enter all PPPoE information in this part. When you use the PPPoE function, you nee d to turn on the DDNS or IP Notification function at the same time. 19) IP address : The IP address obtained when the IP camera conne ...
-
TP-Link TL-SC3171 - page 42
37 24) Use the following DNS server address : Select this when you set the fixed IP address as the IP address of DNS server . z Primary DNS server : Enter the IP address of the primary DNS server . z Secondary DNS serve r: Enter the IP address of the secondary DNS server . ) Note: 1) PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network ...
-
TP-Link TL-SC3171 - page 43
38 The IP Camera offers the DDNS (Dynamic Domain Name Syst em) feat ure, which allows the hosting of a website, FTP server , or e-mail server with a fix ed domain name (named by yourself) and a dynamic IP address, and then your friends can connect to your se rver b y entering your domain name no matter wh at your IP address is. Before using this fe ...
-
TP-Link TL-SC3171 - page 44
39 2. Input all information and fo llow step by step with DynDNS. . 3. Log in with new account and click Account → My Hos ts → Add Host Services . ...
-
TP-Link TL-SC3171 - page 45
40 4. Type domain in the Hostname field and select sub-domain. 5. After typing in information, check your DDNS service. ...
-
TP-Link TL-SC3171 - page 46
41 6. Type yo ur DDNS User ID , Password and Host name in Setting → Basic → Netw ork → DDNS . After completing setting, reboot IP Camera. 6.3.4 UPnP (Universal Plug and Play) Choose menu “ Network → UPnP ”, you can view t he information about UPnP (Universal Plug and Play ) in the screen as shown in the following figure. The UP nP featu ...
-
TP-Link TL-SC3171 - page 47
42 30) HTTP port : Enter the HTTP port number and the default HTTP port is 80. 31) SSL port : Enter the SSL port number and the default SSL port is 443. 32) MPEG4 RTSP port : Enter the MPEG4 RTSP port, default value is 5544. ) Note: UPnP (Univ ersal Plug and Play) : UPnP is a set of computer netwo rk protocol. It al lows devices to connect seamless ...
-
TP-Link TL-SC3171 - page 48
43 33) Device Name : Enter Device Name to your needs. ) Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www .apple.com/support/do wnloads/bonjourforw indows.html 6.3.6 IP Notification When network notify type is set to “ON”, you can s end an e-mail notification of the completion of the network setting. 3 ...
-
TP-Link TL-SC3171 - page 49
44 e-mail is sent. If this option is selected, the IP Notification page will be different as following figure shown. z POP server name : It is necessary when the POP before SMTP is selected in Authentication. T ype the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server . This setting is necessary when the ...
-
TP-Link TL-SC3171 - page 50
45 42) Messenger : Check the radio button before On , so you can use your IP Camera via this fu nction. 43) Protocol : Displays the protocol used. 44) Login Account : Enter th e MSN account registered for you IP Camera. 45) Pass w ord : Enter the password of the MSN acco unt. 46) Re-type p assw ord : T ype the password again. 47) Alias : Give an al ...
-
TP-Link TL-SC3171 - page 51
46 A. Configuring your IP camera ) Note: If you use a Modem Router to access the Internet, y ou should set your IP Camera as the virtual server with port range 20000-21000 on the M odem Router ’s web-based management page. 1. Click “ BASIC->Network->Messenger ” to enter the “Messenger” page. Enable Messenger and then set the Login A ...
-
TP-Link TL-SC3171 - page 52
47 B. Add the camera’s msn account 1. Make sure the desired computer with MSN installed. Log into the MSN. 2. Make sure the MSN view plugin is installed. This plugin is embedded in IntelligentIPInstalle rSetup(TPLink)-1.1.16.09. exe and will be installed automatically when you install Intelligen tIPInstallerSetup(TPLink)-1.1.16.09.exe. ▲ Y ou c ...
-
TP-Link TL-SC3171 - page 53
48 5. Check its st atus. Normally it should be online. 6. Click the camera icon and select Vie w a contact’ s w ebcam to view the video. ...
-
TP-Link TL-SC3171 - page 54
49 7. W ait for a moment, and you will see the video captured by your IP Camera. 6.4 Security Click Security to display the submenus including Account and HTTPS . ...
-
TP-Link TL-SC3171 - page 55
50 6.4.1 Account The device default account and password setting is “admin / admin”. That means everyone who knows IP address can access the device including all configur ation. Therefore, it is necessary to assign a password if the device is intende d to be accessed by others. 52) User name : Set a user name between 4-16 characters. 53) Pass w ...
-
TP-Link TL-SC3171 - page 56
51 z The Viewer mode only can view the Live View . 56) V iew er Authentication : Allows all viewers direct ly access to Live V iew . 6.4.2 HTTPS HTTPS is a URL scheme used to indicate a secure H TTP connection. It is syntac tically identical to the http:// scheme normally used for accessing resources us ing HTTP . Using https: //URL/ with a differe ...
-
TP-Link TL-SC3171 - page 57
52 ) Note: 1) When enable HTTPS with R TSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio. 2) When enabl e HTTPS with R TSP off mode, the IP Camera will protect all setting including video and audio. ...
-
TP-Link TL-SC3171 - page 58
53 Chapter 7 Setting-Advance Click Advance to display the submenus including FTP client , SMTP , HTTP event , Alarm output , Schedule , Alarm input , Alarm buffer , Motion detection and S ystem Log . 7.1 FTP client Use this menu to set up for capturing and sending images to an FTP server . By using FTP client function, you can send the image and vi ...
-
TP-Link TL-SC3171 - page 59
54 7.1.1 General Select On when you use FTP function. The FTP client setting p age will appear . Select Off when you do not wish to use the FTP client function. ) Note: The frame rate and operabilit y on the main viewer may decreas e while a file is being transmitted by the FTP client function. 60) FTP server name : T ype the FTP server name to upl ...
-
TP-Link TL-SC3171 - page 60
55 65) Remote p ath : T ype the path to the destination in FTP server up to 64 characters. 66) Image file name : T ype the file name you want to assi gn to the images when sending to the FTP server . Y ou can use up to 10 alphanumeric characters, - (hyphen ) and _ (underscore) for naming. 67) Suffix : Select a suf fix to add to the file name z Date ...
-
TP-Link TL-SC3171 - page 61
56 ) Note: 1) Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Of f. z Use Alarm Buffer : Select Use alarm buffer when you fo rward ...
-
TP-Link TL-SC3171 - page 62
57 ) Note: Y ou can set the alarm buffer function at Alarm Buffer page (Please go “ Setting → Advance → Alarm Buffer → Setting ”). For more details, you can check Section 7.7 . z Alarm Input: Select the connected alarm. Sensor i nput1: The external sensor which is connected to sensor input 1 of the alarm input. ) Note: Y ou can set the al ...
-
TP-Link TL-SC3171 - page 63
58 ) Note: Y ou can set schedule function on Schedule page . (Please go to “ Setting → Advance → Schedule → Setting ”) For more details, you can check Section 7.5 . 7.1.3 Periodical sending Y ou can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked with setting period. 70) Ima ...
-
TP-Link TL-SC3171 - page 64
59 to the file name. z Sequence number : A consecutive number is adde d to the Image file name. z Sequence number clear : Click Clear and the suffix of the sequence number returns to 1. 72) Interval : Set the periodical sending is ef fective interv al. Min value is 1 min and Max value is 24 hour . 73) Effective period : Set the period when the peri ...
-
TP-Link TL-SC3171 - page 65
60 7.2.1 General Select On when you use the SMTP fu nction. The co mmon setting options are displayed below . Select Off if you do not wish to use the e-Mail (SMTP) function. ) Note: The Setting of General will be the same as the setting of IP Notification (Please check “ SETTING → BASIC → Network → IP Notification ”) ...
-
TP-Link TL-SC3171 - page 66
61 74) SMTP server name : T ype the SMTP server name up to 64 characters, or the IP address of the SMTP server . 75) SMTP Server Port : Y ou can set port number from 1~65535 according to your mail server . The default value is 25. 76) Security setting : Check SSL box if the mail server you use has security restriction. ) Note: If you use g-mail as ...
-
TP-Link TL-SC3171 - page 67
62 78) SMTP : Select it if SMTP authentication is necessary when an e-mail is sent. 79) POP before SMTP : Select if POP before SMTP authenticati on is necessary when an e-mail is sent. ) Note: When you set to On, be sure to select either or both SMTP or / and POP before SMTP . z POP server name : When the POP before SMTP is selected in Authent icat ...
-
TP-Link TL-SC3171 - page 68
63 characters.) 7.2.2 Alarm sending Set to send the mail with connection to the alarm detecti on by the external sensor inp ut or by the built-in motion detection function. Select On to send the image and file to SMTP server linked with the alarm detection. 84) Alarm sending : Select On to set to send mail with c onnection to the alarm detection. 8 ...
-
TP-Link TL-SC3171 - page 69
64 88) Alarm z Motion Detection : Click it for using Motion Detection function as a sensor . Y ou can set motion detection function on the motion detection page. ...
-
TP-Link TL-SC3171 - page 70
65 ) Note: 1) Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.8 . 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Of f. z Use Alarm Buffer : Select Use alarm buffer when you fo rward ...
-
TP-Link TL-SC3171 - page 71
66 ) Note: Y ou can set the alarm buffer function at Alarm Buffer page (Please go “ Setting → Advance → Alarm Buffer → Setting ”). For more details, you can check Section 7.7 . z Alarm input : Select the connected alarm. Sensor input1 : The external sensor which is connected to sensor input 1 of the alarm input. ) Note: Y ou can set the a ...
-
TP-Link TL-SC3171 - page 72
67 ) Note: Y ou can set schedule function on Schedule page . (Please go to “ Setting → Advance → Schedule → Setting ”) For more details, you can check Section 7.5 . 7.2.3 Periodical sending Y ou can set to send an image file by SM TP server periodically by selecting On to send the image file by SMTP server linked with setting period. 90) ...
-
TP-Link TL-SC3171 - page 73
68 is added to the file name. z Sequence number : A consecutive number is adde d to the Image file name. z Sequence number clear : Click Clear and the suffix of the sequence number returns to 1. 92) Interval : Set the periodical sending is ef fective interv al. Minimum value is 30 min and Maximal value is 24 hour . 93) Effective period : Set the pe ...
-
TP-Link TL-SC3171 - page 74
69 7.3.1 General 94) HTTP even t: Set up the HTTP server URL, port, User ID, Pass word, and Proxy Server settings. ...
-
TP-Link TL-SC3171 - page 75
70 For example: URL: 192.168.1.7/cgi-bin/operator/ptzset ) Note: The setting of URL should be the same as CGI. 7.3.2 Alarm sending Set to send the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the image and audio file to HTTP server linked with the alarm detection. Alarm sending : Select On ...
-
TP-Link TL-SC3171 - page 76
71 9 Parameter : the parameter of CGI (defined in Setting → Advance → HTTP event → General → URL ) is from your target device. For example, move=down. 9 Message : message will show up in the form of Me ssage = PTZ down. If your target device didn’t support the parameter of messa ge, you c an’t see the message. So you can just ta ke the ...
-
TP-Link TL-SC3171 - page 77
72 ) Note: Y ou can set the alarm input functi on at alarm input page (Please go “ Setting → Advance → Alarm input → Setting ”). For more details, you can check Section 8.6 . 96) Effective period : Set the period when the periodical sending is ef fective. z Always : The periodical sending is always effective. z Schedule : Y ou can specify ...
-
TP-Link TL-SC3171 - page 78
73 7.4.1 Setting Alarm output : To activate the Alarm output function, select On . When you do not use the Alarm output function, select Off . 97) Digital output : Select High signal output and Low signal output as your alarm. 98) Trigger condition : Select the mode of the Alarm output function. You can choose “ Alarm” or “Timer”. 99) Alarm ...
-
TP-Link TL-SC3171 - page 79
74 ) Note: 1) Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Use Alarm Buffer : Select Use alarm buffer when you fo rward t ...
-
TP-Link TL-SC3171 - page 80
75 ) Note: Y ou can set the alarm buffer function at Alarm Buffer page (Please go “ Setting → Advance → Alarm Buffer → Setting ”). For more details, you can check Section 7.7 . z Alarm Input: Select the connected alarm. Sensor input1 : The exter nal sensor which is connected to sensor input 1 of the alarm input. ) Note: Y ou can set the a ...
-
TP-Link TL-SC3171 - page 81
76 z Schedule: Y ou can specify the period when the periodical sending is effectiv e in the Schedule setting in the other section. ) Note: Y ou can set schedule function at schedule page. (Please go “ Setting → Advance → Schedule → Setting ”) For more details, you can check Sectio n 7.5 . 7.5 Schedule When you click Schedule on the Advanc ...
-
TP-Link TL-SC3171 - page 82
77 7.5.1 Setting 102) Schedule Selection : Select the list box to spec ify the schedule you want to set. z FTP -Alarm z FTP - Periodical z e-Mail (SMTP) -Alarm z e-Mail (SMTP) -Periodical z HTTP event -Alarm 103) Mon (Monday ) to Sun (Sunday ): The time period on the right of the checked day is the effective period of the schedule. 104) S tart time ...
-
TP-Link TL-SC3171 - page 83
78 7.6.1 Setting 106) Sensor input 1 : Click it on for using external sensor wh ich is connected to s ensor input1 of the camera I / O port. z Trigger condition : Select High signal output and Lo w signal output as your alarm. z Camera move : Pull down the window to select the camera preset position. 7.7 Alarm buffer You can set the Pre-alarm image ...
-
TP-Link TL-SC3171 - page 84
79 7.7.1 Setting Alarm buffer : The basic setting options are displayed below. 107) Recording cap acity z Pre-alarm period : Display the maximum recording capac ity of image/audio before the alarm detection. z Post-alarm period : Display the maximum recording capacity of image/au dio after the alarm detection. 108) Recording time : Set the recordin ...
-
TP-Link TL-SC3171 - page 85
80 There are three Motion Detection functions as sens ors to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you c an adjust to specific zone sequentially . Motion Detection function can support FTP , SMTP and HTTP event for capturing and sending images. ...
-
TP-Link TL-SC3171 - page 86
81 7.8.1 Setting 109) Threshold : It means the extent whic h the alarm will be triggered. 110) Sensitivity : It means that how often the sensor will sc an the image. The higher sensitivity it is and the more frequently it scans. z Motion Detection 1 : Click it for using Motion Detection 1 function as a sensor . Y ou can adjust and move the detectin ...
-
TP-Link TL-SC3171 - page 87
82 7.9.1 Setting ¾ Enable remote log : Enables user to send the log data to a specified log server . ) Note: There is a function called W atchdog which can automatically detect errors and restart the IP camera while mpeg, mjepg, 3gpp, or web cannot work. It will take about 5 mi nutes from detection to reboot, and it will show up with “connecting ...
-
TP-Link TL-SC3171 - page 88
83 Appendix APPENDIX a – FRAME RA TE & BIT RA TE T ABLE This chapter provides tables that help you to optimize your IP camera with your network environment. Base on your network upload environ ment to choose the best Image-Quality setting. For example, if the network environment is ADSL 256Kb(upload) / 2Mb(download), the most fluent Image-Qua ...
-
TP-Link TL-SC3171 - page 89
84 320*240 512 30 550 30 320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 160*120 128 15 140 16 A.3 MJPEG @ 15f ps / kbp s Quality 640*480 320*240 160*120 Excellent 4000 1500 600 Detailed 2400 900 400 Good 1600 650 300 S tandard 1300 500 240 Medium 900 350 170 A.4 M ...
-
TP-Link TL-SC3171 - page 90
85 320*240 Good 5 260 5 320*240 Medium 15 350 13 160*120 Medium 5 130 5 160*120 Excellent 15 600 13 160*120 Excellent 5 230 5 160*120 Good 15 300 13 160*120 Good 5 1 15 5 160*120 Medium 15 170 13 160*120 Medium 5 65 5 APPENDIX b – STORAGE REQUIREMENT T ABLE This chapter provides tables that help you set your recording storage system. Please refer ...
-
TP-Link TL-SC3171 - page 91
86 B.3 MPEG4 St orage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting Current Bitrate 640*480 2048 30 23.0 640*480 2048 15 22.2 640*480 1536 30 18.5 640*480 1536 15 17.9 640*480 1024 30 10.5 640*480 1024 15 10.5 640*480 512 30 5.3 640*480 512 15 6.3 320*240 1536 30 15.8 320*240 1536 15 16.9 320*240 1024 30 10.5 320*240 ...
-
TP-Link TL-SC3171 - page 92
87 FA Q Q1. What can I do if I forgot the login name and p assw ord? Press and hold the Reset button on the bottom panel with a p in or paperclip. Please continue holding down the Reset button for approximately 15 seconds. And t hen IP Camera will reboot. It will require 45 seconds. Both the default username and password are admin . Q2. Why can’t ...
Do you have a question concerning TP-Link TL-SC3171?
Use the form below
If you did not solve your problem by using a manual TP-Link TL-SC3171, ask a question using the form below. If a user had a similar problem with TP-Link TL-SC3171 it is likely that he will want to share the way to solve it.