English dropdown-ico

Manual Ricoh FV-L500B1

31 pages 0.64 mb
Download

Go to site of 31

Summary
  • Ricoh FV-L500B1 - page 1

    1/31 FV -L500 B1 User ’s G uide Rev . 1.01 Small Cubic T ype 5.0 Mega Pixel CCD Monochrome PoCL Camera Link Camera FV -L500B1 User ’s Guide RICOH CO MP A NY , L TD. ...

  • Ricoh FV-L500B1 - page 2

    2/31 FV -L500 B1 User ’s G uide Rev . 1.01 T able of Content s 1 Connector Specifications ............................... .............................. .................... .............................. .................... .. 3 1.1 Camera Link Connector ................................................. .............................. .......... ...

  • Ricoh FV-L500B1 - page 3

    3/31 FV -L500 B1 User ’s G uide Rev . 1.01 1 Connector Specifications 1.1 Camera Li nk Connect or SDR (3M) or equiva lent This product is a PoCL type; please use a PoCL compliant cabl e and a frame grabber . Pin Assignment Pin No. Signal Name Pin No. Signal Name 1 +12V 14 GND 2 X0- 15 X0+ 3 X1- 16 X1+ 4 X2- 17 X2+ 5 Xclk- 18 Xclk+ 6 X3- 19 X3+ 7 ...

  • Ricoh FV-L500B1 - page 4

    4/31 FV -L500 B1 User ’s G uide Rev . 1.01 1.2 I/O Connector  HR10A-7R-6PB （ Hirose ） or equivalent  This connector is f or input /output signa ls.  Use HR10A-7P-6S ( Hirose) or equivalent f or the cable side. Pin Assignment  Input/output signals c an be assigned through the camera setting comm unication (see table 4).  Trigg e ...

  • Ricoh FV-L500B1 - page 5

    5/31 FV -L500 B1 User ’s G uide Rev . 1.01 1.3 Equivalent Circuit for the Input Pin of t h e I/ O Connector +3.3V +3.3V TC7WH241FK TOSHIBA TRIGGER IN 10kohm 100ohm On resister Max. = 30ohm ...

  • Ricoh FV-L500B1 - page 6

    6/31 FV -L500 B1 User ’s G uide Rev . 1.01 2 Camera Output T im ing Chart s 2.1 Normal Mod e (Setting 1 0H: 1XX0X XXX) 2.1.1 Horizont al T iming 1 CLK = 15.625 ns 700 CLK 1224 CLK Video out LVAL DVAL Horizontal b lanking 1924 CLK One horizontal (1H) 1224 CLK 700 CLK 700 CLK Video out put active term Horizontal blank ing 700 CLK 607 CLK 93 CLK FVA ...

  • Ricoh FV-L500B1 - page 7

    7/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.1.2 V ertical T iming 2.1.2.1 Normal Ful l Scann i ng (Setting 1 0H: 1XX00X XX, 1 1H: XXX0X 000) 1 H = 30.063 μ s, 16.000 Hz 2.1.2.2 Partial Ful l Scanning (Setting 1 0H: 1XX01X XX, 1 1H: XXX0X 000) 1 H = 30.063 μ s, 16.100 Hz ※ By tra nsferring the blanking period pixels at a high rate, the f rame ...

  • Ricoh FV-L500B1 - page 8

    8/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.1.2.3 1/2 Partial S canning (Setting 1 0H: 1XX01X XX, 1 1H: XXX0X 001) 1 H = 30.063 μ s, 32.015 H z 2.1.2.4 1/4 Partial S canning (Setting 1 0H: 1XX01X XX, 1 1H: XXX0X 010) 1 H = 30.063 μ s, 63.968 Hz 856H Video out Vertical blanking 1 0 3 9 H One vertical (1V) 183H 183H Video output active term 1447 ...

  • Ricoh FV-L500B1 - page 9

    9/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.1.2.5 V ariable Partial S canning ( Setting 10H: 1XX01X XX, 1 1H: XXX0X1 1 1) Internal HD Internal VD Video out EXT_TRIG FIX_TRIG (Common) 10 20 30 40 5 0 Exposur e tim e V1 V2 V3 SUB FVAL DVAL LVAL Numb er of the effecti v e l ines [Y] High sp eed transfer ［ X+ a ］ High speed transfer ［ f+g-X-Y ...

  • Ricoh FV-L500B1 - page 10

    10/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.2 Binning Mo de (Setting 10H: 1X X1XX XX) 2.2.1 Horizont al T iming 1 CLK = 15.625 ns 700 CLK 1224 CLK Video out LVAL DVAL Horizontal b lanking 1924 CLK One horizontal (1H) 1224 CLK 700 CLK 700 CLK Video out put active term Horizontal blank ing 700 CLK 607 CLK 93 CLK FVAL ...

  • Ricoh FV-L500B1 - page 11

    1 1/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.2.2 V ertical T iming 2.2.2.1 Binning Ful l Scann i ng (Setting 10H: 1XX10X XX, 1 1H: XXX0X 000) 1 H = 30.063 μ s, 32.015 H z 2.2.2.2 Binning Par tial Full Scanni ng (Setting 1 0H: 1XX1 1XXX, 1 1H: XXX 0X000) 1 H = 30.063 μ s, 32.077 Hz Video out 1018H Vertical blanking 1039H O ne vertical (1V) 101 ...

  • Ricoh FV-L500B1 - page 12

    12/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.2.2.3 Binning 1/2 P artial Scanning (Setting 1 0H : 1X X1 1XXX , 1 1H : X X X0X 001) 1 H = 30.063 μ s, 54.890 Hz 2.2.2.4 Binning 1/4 P artial Scanning (Setting 1 0H : 1X X1 1XXX , 1 1H : X X X0X 010) 1 H = 30.063 μ s, 63.968 Hz 428H Video out Vertical blanking 6 0 6 H One vertical (1V) 178H 178H Vid ...

  • Ricoh FV-L500B1 - page 13

    13/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.3 Data Or der on the Ca mera Link Out put DA0 to DA1 1: 12bit data for one pixel f rom the first tap DB0 to DB1 1: 12bit data for one pixel f rom the second tap DA0 to DA9: 10bit dat a for one pixe l from the first tap DB0 to DB9: 10bit dat a for one pixe l from the second tap DA0 to DA7: 8bit d at a ...

  • Ricoh FV-L500B1 - page 14

    14/31 FV -L500 B1 User ’s G uide Rev . 1.01 2.4 2 T aps Tr ansferrin g Image (2XE-1Y ） X W Y H X W -1 Y H X 2 Y H X 1 Y H Tap1 Sep X = 1 Sep Y = 1 X 1 Y H-1 X 2 Y H-1 X W Y H-1 X W -1 Y H-1 X 1 Y 1 X 1 Y 2 X 2 Y 1 X 2 Y 2 X W -1 Y 2 X W Y 2 X W -1 Y 1 X W Y 1 Tap2 X W /2 Y 1 X W /2 Y 2 X W /2 Y H-1 X W /2 Y H X W /2+1 Y H X W /2+1 Y H-1 X W /2+ ...

  • Ricoh FV-L500B1 - page 15

    15/31 FV -L500 B1 User ’s G uide Rev . 1.01 3 Camera Operational Mode 3.1 Normal Mod e In this m ode, the images are output continuous ly . 3.1.1 Frame Expo sure 3.1.2 Electric Shut ter E x p o s u r e t i me I n t e r n a l V D CCD e x p o s u r e V i d e o o u t E x p o s u r e t i m e I n t e r n a l V D CCD e x p o s u r e V i d e o o u t ...

  • Ricoh FV-L500B1 - page 16

    16/31 FV -L500 B1 User ’s G uide Rev . 1.01 3.2 Pulse W idth T rigger Mode In this “pulse width trigger mode” with pos itive po larity , the camera exposure starts at the rising edge of the trigger si gnal and stops at the falling edge of the trigger s ignal. Theref ore, in th e case that the exposure posit ive polarity is selected, th e actu ...

  • Ricoh FV-L500B1 - page 17

    17/31 FV -L500 B1 User ’s G uide Rev . 1.01 3.2.2 Pulse W idth T rigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows with the long ex posure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l. The video output si gnal is sen ...

  • Ricoh FV-L500B1 - page 18

    18/31 FV -L500 B1 User ’s G uide Rev . 1.01 3.3 Edge Pres et Trigger Mode In this “edge preset tr igger m ode”, the camera exposure starts at t he rising edge of the trigger s ignal like the “pulse width trigger m ode” in the previous sec tions. However, in this m ode, the exposure duration t ime is based o n the preset value stored b y t ...

  • Ricoh FV-L500B1 - page 19

    19/31 FV -L500 B1 User ’s G uide Rev . 1.01 3.3.2 Edge Pres et Trigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows when the long exposure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l. The video output si gnal is sent ...

  • Ricoh FV-L500B1 - page 20

    20/31 FV -L500 B1 User ’s G uide Rev . 1.01 3.4 H Reset Mod e Normally , v ideo noise appears when the beginning of trigger si gnal is applied before f inishing the video read-out of the prev ious f rame. This noise is caused by the SU B puls e, which is acti vated to clear al l res idual c harges on the CCD p rior t o a new exposure. By select i ...

  • Ricoh FV-L500B1 - page 21

    21/31 FV -L500 B1 User ’s G uide Rev . 1.01 4 Communication Protocol This camera has a communication function that enables external devises, such as a P C, to control the cam era’ s functions. Please use the “R-GigE-Software” comm unication software, o r the following comm unication protocol to communicate to the cam era: 4.1 Commun ication ...

  • Ricoh FV-L500B1 - page 22

    22/31 FV -L500 B1 User ’s G uide Rev . 1.01 The description of the format is as follows. Name Descriptions SOF S tart of Frame. Alwa y s set or rec eive the value as “02H” Device Code This indicates the dest ination of comm unication. Set “000000” when accessing the cam era’ s function settings Set “100000” when accessing the cam er ...

  • Ricoh FV-L500B1 - page 23

    23/31 FV -L500 B1 User ’s G uide Rev . 1.01 【 Example Code 】 Reading the data from the com m and 00H  Comm and to send: 02H, 00H, 00H, 01 H, 00H, 03H SOF Device Code Read/Write Page Selection Command Code Data Length Data EOF (8bit) (6bit ) (1bit) (1bit) (8bit) (8bit) (1byte) (8bit) 02H 00H 00H 01H 00 H 03H  Comm and to r eceive up on a ...

  • Ricoh FV-L500B1 - page 24

    24/31 FV -L500 B1 User ’s G uide Rev . 1.01 4.4 Camera C ontrol Co mmand 4.4.1 Camera C ommand Li st  The data unit of the each comm and is 1 byte (8bit).  The data can be s aved to the EEPROM if there is an “X” in the “Sa ve to EEPROM” colum n in the following list.  The camer a ini tializes base d on the stored data in the EEPR ...

  • Ricoh FV-L500B1 - page 25

    25/31 FV -L500 B1 User ’s G uide Rev . 1.01 81 to EFH Reserved - - Command No. R/W Save to EEPROM Function Initial Data Data Range F0H R/W IO connector signals(8bit: D[70]) F1 to FFH Reserved - - ...

  • Ricoh FV-L500B1 - page 26

    26/31 FV -L500 B1 User ’s G uide Rev . 1.01 4.4.2 Description s of the C amer a Control C ommands (The underline setti ngs are the factor y default settings) Command No. Command Descriptions 10H: MOD1[70] [Camera function mode setting 1] Initial data: 09H This sets the following camera function mode. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7: Conti ...

  • Ricoh FV-L500B1 - page 27

    27/31 FV -L500 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 14H: UART [70] [Communication mode] Initial Data: 01H This sets the communication modes. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7~D2: No Function Set alway s “000000” D1~D0: Communication Mode 00: 38,400 bps 01: 9,600 bps 10 to 1 1: No function (Prohibited setting. Do ...

  • Ricoh FV-L500B1 - page 28

    28/31 FV -L500 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 26H: PWR[70] 27H: PWR[158] [Effective line numbers in the variable p art ial scanning] Initial Data: P W R[150] = 20 58, Data Range: 0 to 2058 This sets the number of the tot a l effe c tive lines (image height) in the variable part ial scanning mode. Notes: 1. ...

  • Ricoh FV-L500B1 - page 29

    29/31 FV -L500 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 68H: DIGIT AL_ CLAMP[70] [Digital clamp] Initial data : DIGIT AL_CLA M P[7..0] = 0 Sets the digital clamp. D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7 to D5: No function Always set as “000” D4: Mirror image 0: Normal image 1: M i rror image D3: No function Always set as ? ...

  • Ricoh FV-L500B1 - page 30

    30/31 FV -L500 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 79H: EFFCT[70] [Image effect selection] Initial data: E FFCT[7..0] = 0 Sets the image effe c t. D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 00H: No effect (Original video) 01H: 1 1b it gradation 02H: 10bit gradation 03H: 9bit gradation 04H: 8bit gradation 05H: 7bit gradation 06H: ...

  • Ricoh FV-L500B1 - page 31

    31/31 FV -L500 B1 User ’s G uide Rev . 1.01 Revision Histor y Rev Date Changes Note 1.00 2012/06/15  Initial Release 1.01 2012/07/13  Updated Document T itle Communication Protoc ol 78H T est p attern 79 H Pasteurization Added 3E-3FH T est patte rn variable level RICOH CO MP A NY , L TD. URL http:// www .r icoh.com/fa_sec urity/ ...

Manufacturer Ricoh Category Digital Camera

Documents that we receive from a manufacturer of a Ricoh FV-L500B1 can be divided into several groups. They are, among others:
- Ricoh technical drawings
- FV-L500B1 manuals
- Ricoh product data sheets
- information booklets
- or energy labels Ricoh FV-L500B1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ricoh FV-L500B1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ricoh FV-L500B1, service manual, brief instructions and user manuals Ricoh FV-L500B1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ricoh FV-L500B1.

Similar manuals

A complete manual for the device Ricoh FV-L500B1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ricoh FV-L500B1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ricoh FV-L500B1.

A complete Ricoh manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ricoh FV-L500B1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ricoh FV-L500B1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ricoh FV-L500B1, that we can find in the current document
3. Tips how to use the basic functions of the device Ricoh FV-L500B1 - which should help us in our first steps of using Ricoh FV-L500B1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ricoh FV-L500B1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ricoh FV-L500B1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ricoh FV-L500B1?

Use the form below

If you did not solve your problem by using a manual Ricoh FV-L500B1, ask a question using the form below. If a user had a similar problem with Ricoh FV-L500B1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)