English dropdown-ico

Manual Sanyo SRC-850

35 pages 0.32 mb
Download

Go to site of 35

Summary
  • Sanyo SRC-850 - page 1

    INSTRUCTION MANUAL SRC-850 V ideo Cassette Recorder English Magnétoscope à Cassette Français V ideograbador Español Please read this manual and accompanying “IMP ORT ANT SAFETY INSTRUCTIONS” sheet carefully before connecting your VCR and operating it for the first ti me. Be sure to read carefully and follow all the PRE CAUTIONS on page 1. K ...

  • Sanyo SRC-850 - page 2

    PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RI SK OF ELECTRIC SHOCK, DO NOT REMOVE CO VER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIF IED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsula ...

  • Sanyo SRC-850 - page 3

    FEA TURES • Controllable through an RS- 485 connection • High-speed Fast Forward/Rewind • 8-hour mode recording • In 8-hour modes audio recording i s available • Autorepeat recording • Series recor ding function • Alarm recording functi on • On-screen mode setti ng • Integrated time date generator • Day/Time search func tion • ...

  • Sanyo SRC-850 - page 4

    LOCA TIONS OF CONTROLS AND INDICA T ORS Front Panel 1 EJEC T button 2 Cassette loading slot 3 PAUSE/SEARCH button 4 REW (rewind) button 5 PLAY button 6 FF (fast forward) button 7 STOP button 8 REC (record) button 9 STANDBY/ON indicator F TAPE END indicator G MENU RESET button H ALL RESET button I COUNTER RESET , j button J l button K TRACKING/V. ST ...

  • Sanyo SRC-850 - page 5

    LOCA TIONS OF CONTROLS AND INDICA T O RS Digital Display 1 Alarm indicator Flashes when an alarm is being recorded: Comes on after the alarm has been recorded: 2 Power failure indi cator Comes on after a power failure. 3 Mode display • Recording/playback speed mode • Alarm scan mode 3 , 4 Mode display • Alarm search mode • Day/Time search m ...

  • Sanyo SRC-850 - page 6

    LOCA TIONS OF CONTROLS AND INDICA T O RS Back Panel 1 Battery compartment 2 ALARM OUT (alar m output) terminal 3 ALARM IN (alarm input) terminal 4 COM (common) terminal 5 ...

  • Sanyo SRC-850 - page 7

    CONNECTIONS Connect the video camera and monitor TV as shown in the figure below. NOTE: Before making the connec tions, make sure al l the devices are dis connected from the power outlet. AB AB ALARM IN COM OUT SERIES OUT/ NON REC OUT SERIES IN OUT IN EJECT SW OUT ...

  • Sanyo SRC-850 - page 8

    TYPES OF ON-SCREEN DISPLA YS AND DISPLA Y SEQUENCE NOTES: • When a menu is dis played, recording will not be pos sible. • Press the PAUSE/SEARCH or MENU button, the setting procedure is now completed. • During recording or play back the menus cannot be dis played. • To reset the settings of a menu to thei r original values , select the desi ...

  • Sanyo SRC-850 - page 9

    SETTING THE LANGUAGE AND CLOCK Language Setting English, French or S panish can be select ed by the user. 1 Turn the power on to all devices used. 2 Press the MENU button to dis play the (SET UP 1) menu. @@@@@@@<SET@UP@1> öDAYLIGHT@SET@@@NO@USE @@@@@@@@WEEK@MONTH@TIME @ON@@@1ST-SUN@@04@02:00 @OFF@@LST-SUN@@10@02:00 öREMOTE@@@@@@@@EJECT öCL ...

  • Sanyo SRC-850 - page 10

    CHANGING THE ON-SCREEN DISPLA Y Changing the Date/Time Display Position 1 Turn the power on to all devices used. 2 Set the ON SCREEN switch to the “ ON” position. ° The date and time are display ed. 10-15-99@FRI@000 15:20:00 3 Press the « (or ] ) button. ° The display wil l move towards the right (or the bottom). NOTES: • If the « (or ] ) ...

  • Sanyo SRC-850 - page 11

    VIDEO CASSETTE T APES Use only video cas sette tapes bearing the w logo. This VCR was primaril y designed for use wi th T-160 cassette tapes, it is recommended to us e T-160 standard grade VHS video c assette tapes for optimal performance. Handling Cassette Tapes The cassette tapes shoul d always be stored vertically , in their cases, away fr om hi ...

  • Sanyo SRC-850 - page 12

    VIDEO CASSE TTE T APES Correct tape thread check function If the correct tape thread check func tion is on, after the cassette tape is loaded, a mec hanism will oper ate for about 5 seconds to check that the tape has been threaded (loaded) correctly and the c assette indicator “ o ” will bli nk during that period. If the tape is not loaded prop ...

  • Sanyo SRC-850 - page 13

    NORMAL RECORDING Normal Recording Before Starting • Turn the power on to all devices used. • Load a cassette tape with erasur e-prevention tab. NOTE: • If in the (SET UP 2) menu, TA PE IN MODE is set to “REC”, recording will st art after the tape thread has been checked. • Set the ON SCREEN switch to the “ ON” position. 1 Press the ...

  • Sanyo SRC-850 - page 14

    NORMAL RECORDING Action to Take when the Video Signal Deteriorates If there is no video si gnal during recor ding, fast forward, rewind modes, when in stop mode or when a tape is not loaded the menus are not display ed, “VIDEO LOSS” can be displayed on-sc reen and a signal (0 V) can be output at the ALARM OUT terminal. If in the (SET UP 5) menu ...

  • Sanyo SRC-850 - page 15

    AUT OREPEA T RECORDING Autorepeat Recording The same tape can be recorded over many times . • Follow the Before starting steps, under “N ORMAL RECORDING”. 1 Press the MENU button until the (SET UP 2) menu is displayed. @@@@@@@<SET@UP@2> öDISPLAY @@@DATE@@@@@@@@@@Y @@@TIME@@@@@@@@@@Y @@@ALARM@COUNT@@@Y öTAPE@IN@MODE@@@@STOP öTAPE@END@ ...

  • Sanyo SRC-850 - page 16

    ALARM RECORDING By connecting the ALARM IN terminal to a door switch, an interphone, etc., a recording can be done onl y when necessary. Alarm Recording Setting Alarm recording is perform ed when there is an input (trigger) at the ALARM IN terminal, “AL” i s displayed on the digital dis play. • Make all neces sary connections. • Follow the ...

  • Sanyo SRC-850 - page 17

    ALARM RECORDING Alarm Recording Counter Display • During alarm recording, “AL” will be flashing on the digital displ ay. • If the ON SCREEN switch is set to the “ ON” position, the number of alarms will flash on the moni tor screen. • The maximum display number of alarm recordings is “999”, at the next alarm recording the counter ...

  • Sanyo SRC-850 - page 18

    ALARM RECORDING Alarm Search To go to the beginning of a desired al arm recording. 1 Press the PAUSE/SEARCH button duri ng stop mode. ° “AL SEARCH 01” will be displayed on screen. 2 Press the l (or j ) button to set the desired alar m number (1 to 99), then press the FF (or REW ) button. ° The desired alarm is s earched and a still image of t ...

  • Sanyo SRC-850 - page 19

    SERIES RECORDING Using 2 VCRs or more, the s eries recording function l ets you switch recor ding from one unit to the next (only wi th VCRs of the same model as this one). NOTE: • T-160 must be used for proper serial out operation. Series Recording Setup 1 Connect 2 VCRs or more as ill ustrated below. 2 Set the following i tems as indicated. Ite ...

  • Sanyo SRC-850 - page 20

    SERIES RECORDING Continous Loop Recording Setup It is possible to c onfigure at least two this VCR for continous loop recor ding. Under loop recording when the r ecording finishes on the first unit, the new recording wi ll start on the sec ond unit. When the recording fini shes on the second unit, recor ding will start on the fir st unit. 1 The SER ...

  • Sanyo SRC-850 - page 21

    NORMAL PLA YBACK Normal Playback 1 Turn on the power to the VCR and TV monitor. 2 Load the video cassette tape. 3 Press the PLAY button. ° Playback starts. ° If necessary, adjus t the tracking to eliminate the noise from the picture. 4 To stop playback, pr ess the STOP button. ° To advance or rewind the tape, press the FF or REW button. NOTES: ? ...

  • Sanyo SRC-850 - page 22

    SPECIAL PLA YBACK Picture Search (Forward and Reverse) 1 Press the FF (or REW ) button, during normal playback. ° The image can be seen while the tape i s advanced (or rewound) at high speed. 2 To return to normal playback , press the PLAY button. NOTES: • During picture search, noi se (horizontal bars) wi ll appear in the picture. • The sound ...

  • Sanyo SRC-850 - page 23

    SETTING THE SECURITY LOCK The security l ock function is designed to prevent accidental s topping of recording if the ST OP button is pressed inadvertenl y. 1 While holdi ng the TRACKING/V.STILL + button, press the l button. ° “ ö ” is displayed on the di gital display . To cancel the secur ity lock, while holding the TRACKING/V.STILL + butto ...

  • Sanyo SRC-850 - page 24

    SETTING THE CASSETTE EJECT MODE Cassette Eject Setup When using 2 VCRs or more, the cassette tape of all the VCRs or some of the VCRs c an be ejected, if the EJECT terminals on the V CRs are connected as indic ated. 1 Press the MENU button until the (SET UP 2) menu is displayed. @@@@@@@<SET@UP@2> öDISPLAY @@@DATE@@@@@@@@@@Y @@@TIME@@@@@@@@@@ ...

  • Sanyo SRC-850 - page 25

    SETTINGS FOR RS485 TERMINALS USE The VCR can be controll ed through a special control ler connected to the RS485 terminal. If the VCR is going to be control led trough a connection to the RS485 terminals, be sur e to first make the settings below. 1 Press the MENU button until the (SET UP 5) menu is displayed. @@@@@@@<SET@UP@5> öTAPE@END@OUT ...

  • Sanyo SRC-850 - page 26

    CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION 1 Press the MENU button until the (POWER FAILURE), (DEW) and (USE D TIME) menu is displ ayed. (POWER FAILURE) . . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed. (DEW) . . . . . . . . . . . . . The number of fail ...

  • Sanyo SRC-850 - page 27

    OUTPUT TERMINALS TAPE END OUT Terminal • During recording, when the end of the tape is r eached or when the tape counter reading indicates 7 hour s 57 minutes or more, the output becomes 0V (Low). • To reset the output, press the STOP or EJECT button. • During autorepeat recording, when the end of the tape is reached, the output becomes 0V (L ...

  • Sanyo SRC-850 - page 28

    OUTPUT TERMINALS SW OUT Terminal When recording, a pulse si gnal is output at the SW OUT terminal. This terminal i s usually connected to the sw itch input (SW IN) of devices li ke a camera switcher unit, or a quad compr esso r. SW OUT Terminal Output Settin g 1 Press the MENU button until the (SET UP 3) menu is displayed. @@@@@@@<SET@UP@3> ? ...

  • Sanyo SRC-850 - page 29

    OUTPUT TERMINALS REMOTE Jack You can use a VA -RMN01 Remote Control Unit (sold separately) to contro l remotely the VCR. NOTE: • The functions not avail able on the VCR will not operate. Remote control of the VCR is possi ble by connecting a remote controller wi th a circuit such as indi cated below, to the REMOTE jac k. NOTES: • Use a 3.5 mm m ...

  • Sanyo SRC-850 - page 30

    MAINTENANCE Daily Inspection The following daily inspections ar e recommended in order to assure long-term and trouble- free operation of the unit. The daily inspec tions are particularly important if using autorepeat recording. Inspection Procedure 1 Turn on the power to the VCR, camera, TV monitor and other connected devices . 2 Check that the im ...

  • Sanyo SRC-850 - page 31

    MAINTENANCE Maintaining and Checking The Mechanism To maintain the VCR functions and features working properly, and to avoid damages or di rt on the tape, it is recommended to follow the maintenance poi nts and periodici ty indicated below. For detailed information, pleas e contact your dealer. Maintenance Table F : Cleaning E : Confirmation v : Lu ...

  • Sanyo SRC-850 - page 32

    TROUBLESHOOTING GUIDE If the unit does not operate normally when you fol low the instructions i ndicated in the manual, pleas e refer to the table below. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION No power The power cord is not connected Connect the power cord No image displayed on the monitor TV The connections are not correc t Check that all connec ...

  • Sanyo SRC-850 - page 33

    SPECIFICA TIONS General Specifications Video heads system Dual-azimuth 4-head rotating hel ical scanning sy stem: Dual azimuth 2-head for record and standard playback Dual azimuth 4-head for forward picture search, revers e picture search and still mode Audio recording In 8-hour mode Tape speed 11.12 mm /sec Specified vi deo cassette tape VHS 1/2 i ...

  • Sanyo SRC-850 - page 34

    SANYO INDUSTRIAL VCR WARRANTY OBLI GATI ONS In order to obtain warranty service, the product must be delivered t o and picked up f rom an Authorized Sanyo Service Center at t he user’s expense, unless specifically stated otherwise i n this warranty. The nam es and addresses of Authorized Sanyo Service Centers may be obtai ned by calling the toll- ...

  • Sanyo SRC-850 - page 35

    SANYO Electric Co., Ltd. 1AC6P1P2047–AA NU4Q/U3 (1099KP-SY01) Issue No. 3 Copyright SANYO, 1999 Al l rights reserved. Printed in Indonesia NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999 ...

Manufacturer Sanyo Category VCR

Documents that we receive from a manufacturer of a Sanyo SRC-850 can be divided into several groups. They are, among others:
- Sanyo technical drawings
- SRC-850 manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo SRC-850
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo SRC-850.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo SRC-850, service manual, brief instructions and user manuals Sanyo SRC-850. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo SRC-850.

Similar manuals

A complete manual for the device Sanyo SRC-850, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo SRC-850 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo SRC-850.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo SRC-850 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo SRC-850, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo SRC-850, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo SRC-850 - which should help us in our first steps of using Sanyo SRC-850
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo SRC-850
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo SRC-850 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo SRC-850?

Use the form below

If you did not solve your problem by using a manual Sanyo SRC-850, ask a question using the form below. If a user had a similar problem with Sanyo SRC-850 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)