English dropdown-ico

Manual Rogue Audio TEMPEST II

11 pages 0.23 mb
Download

Go to site of 11

Summary
  • Rogue Audio TEMPEST II - page 1

    TEMPEST II Vacuum Tube Integrated Amplifier Owner’s Manual Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA 18322 Issue date: 02/9/05 ...

  • Rogue Audio TEMPEST II - page 2

    1 TABLE OF CONTENTS 1) Introduction 2 2) Unpacking the Tempest II amplifier 2 3) Installing the Tempest II into your system 3 4) Operation of the Tempest II 5 5) Setting the tube bias 7 6) Troubleshooting 8 7) Fuse values 9 8) Specifications 9 9) Warranty 10 ...

  • Rogue Audio TEMPEST II - page 3

    2 INTRODUCTION Congratulations on your purchas e decision! We at Rogue Audio truly believe that our amplifiers provide the “smartest” valu e in high-end audio. If you have never owned a vacuum tube amplifier you w ill be thrilled by the silky-sm ooth sound and incredible detail that only a tube am plifier can provide. And with the Tem pest II a ...

  • Rogue Audio TEMPEST II - page 4

    3 Figure 1 Tube and Deck Layout INSTALLING THE TEMPEST II INTO YOUR SYSTEM Amplifier Location: The Tempest II depends on natural convect ion flow patterns for proper cooling. To ensure proper cooling, the unit should be located in a positio n so that the airflow is not impeded. The unit should not be placed in a fully enclosed shelf, and should hav ...

  • Rogue Audio TEMPEST II - page 5

    4 your speaker or your local dealer to determine the correct choice. The amplifier is factory set to 8 ohm. To switch impedance setting: 1) Using a ½” wrench remove the outermost nut from the positive (red) binding post. 2) Remove the 8 ohm tap (green wire marked 8) from the binding post. Be careful to leave the black wire with heat shrink on th ...

  • Rogue Audio TEMPEST II - page 6

    5 Connecting the Tempest II to a subwoofer: The Tempest II has a pair of variable outputs on the back that are labeled “variable out.” You can use these as pream p outs for driving a subwoofer. You may also use the binding posts if your s ubwoofer is designed to connect directly to these. OPERATING YOUR TEMPEST II 1) Delays- Note that the Tempe ...

  • Rogue Audio TEMPEST II - page 7

    6 Note – Important! After turning off the am plifier, wait at least one m inute to turn it back on. Do not turn it on then off and then on again in quick succession. Doing this will not allow the power supply to discharge between on/off cycling and may result in transient noises. USING AN EXTERNAL PREAMPLIFIER The Tempest offers the flexibility o ...

  • Rogue Audio TEMPEST II - page 8

    7 power level in triode is high enough that it will likely provide plenty of power for almost any speaker load. 3) Ultralinear operation – With this conf i guration, power levels near those of tetrode mode are achieved with low dist ortion levels that approach those of triode operation. For loudspeakers that demand very high levels of power, ultr ...

  • Rogue Audio TEMPEST II - page 9

    8 Note – There is a small leakage cur rent of 5mA that flows through the meter’s shunt resistor during the tube bi as setting operation. To accurately account for this, set the bias current at 5 mA lower than the desired setting. 6) Using the bias tool, slowly turn the sc rew on the potentiometer that is adjacent to the switch until the bias me ...

  • Rogue Audio TEMPEST II - page 10

    9 FUSE VALUES Main fuse located on rear panel (1) – 5 Amp slow blow Tube Fuses (4) – 1/4 Amp slow blow SPECIFICATIONS output powe r 90 WPC frequency resp ons e 5Hz – 50 kHz ± 1dB THD < 0.1% typ, < 1% at rated p ower input sensitivity 1 .0 V RMS dimensi ons 14 ½” W x 19” D x 7” H weight 60 pounds (2 5 Kg) shipping weight 6 5 lb s ...

  • Rogue Audio TEMPEST II - page 11

    10 OWNER AND WARRANTY REGISTRATION FORM Included with this manual is an Owner and Warranty Registration Form. Please take a minute to fill out this card and retu rn it to Rogue Audio. This card m ust be returned within 15 days of purch ase to validate the warranty. LIMITED WARRANTY Warranty Per iod This product has been manufactured under th e high ...

Manufacturer Rogue Audio Category Stereo Amplifier

Documents that we receive from a manufacturer of a Rogue Audio TEMPEST II can be divided into several groups. They are, among others:
- Rogue Audio technical drawings
- TEMPEST II manuals
- Rogue Audio product data sheets
- information booklets
- or energy labels Rogue Audio TEMPEST II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rogue Audio TEMPEST II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rogue Audio TEMPEST II, service manual, brief instructions and user manuals Rogue Audio TEMPEST II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rogue Audio TEMPEST II.

Similar manuals

A complete manual for the device Rogue Audio TEMPEST II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rogue Audio TEMPEST II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rogue Audio TEMPEST II.

A complete Rogue Audio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rogue Audio TEMPEST II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rogue Audio TEMPEST II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rogue Audio TEMPEST II, that we can find in the current document
3. Tips how to use the basic functions of the device Rogue Audio TEMPEST II - which should help us in our first steps of using Rogue Audio TEMPEST II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rogue Audio TEMPEST II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rogue Audio TEMPEST II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rogue Audio TEMPEST II?

Use the form below

If you did not solve your problem by using a manual Rogue Audio TEMPEST II, ask a question using the form below. If a user had a similar problem with Rogue Audio TEMPEST II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)