English dropdown-ico

Manual Extron electronic 42 HVA

46 pages 0.73 mb
Download

Go to site of 46

Summary
  • Extron electronic 42 HVA - page 1

    CrossPoint 42 HV A Cr ossPoint Matrix Switcher 68-654-01 Rev . A Printed in the USA 08 02 ...

  • Extron electronic 42 HVA - page 2

    This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions ? ...

  • Extron electronic 42 HVA - page 3

    Quick Start — Cr ossPoint 42 HV A Installation Step 1 - Mounting Mount the switcher in a rack. Step 2 - T urn off power T urn off power to the input and output devices, and remove the power cor ds from them. Step 3 - Cable video input Cable the switcher for RGBHV , RGBS, RGsB, RsGsBs, component video , S-video, or composite video input ( 3 ). See ...

  • Extron electronic 42 HVA - page 4

    Quick Start — CrossPoint 42 HV A, cont’d Additional Information View ties A. Press and release the Conf/Save button to select audio and/or video. B. Press and release the output button to select the desired output (1 or 2). The selected output and tied input LEDs light. View and adjust audio level A. Press and hold the Conf/Save button until th ...

  • Extron electronic 42 HVA - page 5

    i CrossPoint 42 HVA Matrix Switcher • Table of Contents T able of Contents Chapter 1 • Introduction ....................................................................................................... 1-1 About the CrossPoint 42 HV A Matrix Switcher ................................................... 1-2 Features ............................ ...

  • Extron electronic 42 HVA - page 6

    ii CrossPoint 42 HVA Matrix Switcher • Table of Contents T able of Contents, cont’d 68-654-01 Rev . A Printed in the USA 08 02 Appendix A • Specifications .............................................................................................. A-1 Specifications ........................................................................... ...

  • Extron electronic 42 HVA - page 7

    Cr ossPoint 42 HV A Matrix Switcher 1 Chapter One Intr oduction About the CrossPoint 42 Matrix Switcher Features ...

  • Extron electronic 42 HVA - page 8

    Introduction, cont’d CrossPoint 42 HVA Matrix Switcher • Introduction 1-2 Introduction About the CrossPoint 42 Matrix Switcher The Extron CrossPoint 42 HV A Matrix Switcher is an analog RGBHV matrix switcher , with stereo audio, that distributes any input to any combination of outputs. The matrix switcher can route multiple input/output configu ...

  • Extron electronic 42 HVA - page 9

    1-3 CrossPoint 42 HVA Matrix Switcher • Introduction Features Inputs — This switcher offers 4 RGBHV , RGBS, RGsB, RsGsBs, HDTV , component video, S-video, or composite video inputs on BNC connectors. Stereo audio input can be balanced or unbalanced, on 3.5 mm, 5-pole captive screw terminals. Outputs — 2 RGBHV , RGBS, RGsB, RsGsBs, HDTV , comp ...

  • Extron electronic 42 HVA - page 10

    Introduction, cont’d CrossPoint 42 HVA Matrix Switcher • Introduction 1-4 Switching — Individually buffered, independent matrix switched outputs with audio follow and audio breakaway . • Any input to any output • Audio follow — Audio can be switched with the corr esponding video input. This feature allows any audio signal to be selected ...

  • Extron electronic 42 HVA - page 11

    Cr ossPoint 42 HV A Matrix Switcher 2 Chapter T wo Installation Mounting the Switcher Cabling and Rear Panel Views ...

  • Extron electronic 42 HVA - page 12

    Installation, cont’d CrossPoint 42 HVA Matrix Switcher • Installation 2-2 Installation Mounting the Switcher The CrossPoint 42 HV A Matrix Switcher is housed in a rack-mountable, 1U high, 19” wide metal enclosure. The appropriate rack mount kit (#70-077-03) is included with the switcher . The switcher may also be surface-mounted under a table ...

  • Extron electronic 42 HVA - page 13

    2-3 CrossPoint 42 HVA Matrix Switcher • Installation Rack mounting Rack mount the switcher as follows: 1 . Attach the rack mounting brackets to the switcher with the eight provided #8 machine scr ews (figure 2-1). 2 . Insert the switcher into the rack, align the holes in the mounting bracket with those of the rack. 3 . Secur e the switcher to the ...

  • Extron electronic 42 HVA - page 14

    Installation, cont’d CrossPoint 42 HVA Matrix Switcher • Installation 2-4 Audio input and output connections 4 Connections for balanced and unbalanced audio inputs — Each input has a 3.5 mm, 5-pole captive screw connector for balanced or unbalanced stereo audio input. Connectors are included with each CrossPoint switcher , but you must supply ...

  • Extron electronic 42 HVA - page 15

    2-5 CrossPoint 42 HVA Matrix Switcher • Installation RS-232 connection 6 Remote/RS-232 port — Connect a host device, such as a computer or touch panel control, to the Cr ossPoint via this 9-pin D connector for serial RS-232 control. If desired, attach an MCP 1000 remote control panel master unit to the switcher ’s RS-232 connector . Y ou can ...

  • Extron electronic 42 HVA - page 16

    Installation, cont’d CrossPoint 42 HVA Matrix Switcher • Installation 2-6 ...

  • Extron electronic 42 HVA - page 17

    Cr ossPoint 42 HV A Matrix Switcher 3 Chapter Thr ee Operation Front Panel Controls and Indicators Front Panel Operations Rear Panel Controls 42 ...

  • Extron electronic 42 HVA - page 18

    Operation, cont’d CrossPoint 42 HVA Matrix Switcher • Operation 3-2 Operation Front Panel Contr ols and Indicators The front panel controls (figur e 3-1) are grouped into thr ee sets. The Outputs button and LEDs are gr ouped on the left side of the control panel, the Inputs buttons and LEDs are grouped in the center of the panel, and the I/O (i ...

  • Extron electronic 42 HVA - page 19

    3-3 CrossPoint 42 HVA Matrix Switcher • Operation explanation of audio level adjustment is included in V iewing and adjusting the audio level later in this chapter . 6 Audio/-dB LED — The Conf/Save button selects and deselects audio for a configuration being created or viewed. The Audio/-dB LED lights to indicate that audio is available for con ...

  • Extron electronic 42 HVA - page 20

    Operation, cont’d CrossPoint 42 HVA Matrix Switcher • Operation 3-4 4. If audio and video are tied to different inputs (audio br eakaway), and if you select video and audio for display , the LED for the selected video input lights steadily and the LED for the selected audio input blinks. 5. If an output with no tie is selected, only that output ...

  • Extron electronic 42 HVA - page 21

    3-5 CrossPoint 42 HVA Matrix Switcher • Operation V iewing the current configuration The current configuration can be viewed using the front panel buttons. Pr ess and release the Output button and the LED for the input tied to it will light. If, when you view video and audio ties, the Audio LED blinks and the V ideo LED is on after selecting an i ...

  • Extron electronic 42 HVA - page 22

    Operation, cont’d CrossPoint 42 HVA Matrix Switcher • Operation 3-6 Figure 3-4— +8dB gain on input #1 displayed B Press and r elease an input button to select an input. C Press and r elease the Decrement ( ) or Increment ( ) button to decrease or increase the audio input level until the Inputs 1 and 2 LEDs are lit and the Input 3 LED is blink ...

  • Extron electronic 42 HVA - page 23

    3-7 CrossPoint 42 HVA Matrix Switcher • Operation V R G B H V INPUTS R 3 4 2 H V H V 1 ON 2 3 4 H V H V 1 Rear Panel Controls The CrossPoint 42 HV A has sync termination switches on the rear panel for all inputs (figure 3-5). The switches pr ovide a way to condition non-TTL sync levels greater than 5 Vp-p, enabling the sync to be pr operly passed ...

  • Extron electronic 42 HVA - page 24

    Operation, cont’d CrossPoint 42 HVA Matrix Switcher • Operation 3-8 ...

  • Extron electronic 42 HVA - page 25

    Cr ossPoint 42 HV A Matrix Switcher 4 Chapter Four Pr ogrammer’ s Guide Host-to-Switcher Instructions Switcher-Initiated Messages Using the Command/Response T able ...

  • Extron electronic 42 HVA - page 26

    Programmer’ s Guide, cont’d CrossPoint 42 HVA Matrix Switcher • Programmer’s Guide 4-2 Pr ogrammer’ s Guide The switcher ’s rear panel RS-232 connector (figur e 4-1) can be connected to the serial port output of a host device such as a computer or control system. This connection makes software control of the switcher possible. Remote co ...

  • Extron electronic 42 HVA - page 27

    4-3 CrossPoint 42 HVA Matrix Switcher • Programmer’s Guide Switcher Err or Responses When the switcher receives an SIS command and determines that it is valid, it performs the command and sends a response to the host device. If the switcher is unable to perform the command because the command is invalid or contains invalid parameters, the switc ...

  • Extron electronic 42 HVA - page 28

    Programmer’ s Guide, cont’d CrossPoint 42 HVA Matrix Switcher • Programmer’s Guide 4-4 Command/response table for SIS commands Command ASCII Command Response Additional description (host to switcher) (switcher to host) Create ties T ie input X2 to output X3 , A & V X2 * X3 , ! Out X3 . In X2 . All Example : 1*2! Out02 . In01 . All T ie ...

  • Extron electronic 42 HVA - page 29

    4-5 CrossPoint 42 HVA Matrix Switcher • Programmer’s Guide Command/response table for SIS commands, cont’d Command ASCII Command Response Additional description (host to switcher) (switcher to host) Reset to factory defaults Reset audio levels Esc ZA Zpa Reset all audio levels to 0dB Reset whole switcher Esc ZXXX Zpx Clears all ties & res ...

  • Extron electronic 42 HVA - page 30

    Programmer’ s Guide, cont’d CrossPoint 42 HVA Matrix Switcher • Programmer’s Guide 4-6 ...

  • Extron electronic 42 HVA - page 31

    Cr ossPoint 42 HV A Matrix Switcher 5 Chapter Five Switcher Softwar e Windows-Based Program Control ...

  • Extron electronic 42 HVA - page 32

    Matrix Software, cont’d CrossPoint 42 HVA Matrix Switcher • Matrix Software 5-2 Matrix Softwar e Windows-Based Pr ogram Control The Extron Universal Switcher Contr ol Program is included with your CrossPoint 42 HV A switcher . This pr ogram communicates with the switcher , via the RS-232 port, and provides remote contr ol of the input selection ...

  • Extron electronic 42 HVA - page 33

    5-3 CrossPoint 42 HVA Matrix Switcher • Matrix Software Figure 5-1 — Universal Switcher Contr ol Program Main Menu window Figure 5-2 — RGB Delay and Unit Reset window Figure 5-3 — Configur e Audio Options window ...

  • Extron electronic 42 HVA - page 34

    Matrix Software, cont’d CrossPoint 42 HVA Matrix Switcher • Matrix Software 5-4 ...

  • Extron electronic 42 HVA - page 35

    Cr ossPoint 42 HV A Matrix Switcher A Appendix A Specifications and Part Numbers Specifications Part Numbers ...

  • Extron electronic 42 HVA - page 36

    Specifications and Part Numbes, cont’d CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers A-2 Specifications and Part Numbers Video Routing .......................................... 4 x 2 matrix Gain ............................................... Unity Bandwidth .................................... 300 MHz (-3dB), fully loade ...

  • Extron electronic 42 HVA - page 37

    A-3 CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers Audio input Number/signal type ................... 4 stereo, balanced/unbalanced Connectors .................................... 4 3.5 mm captive screw connectors, 5 pole Impedance .................................... >10 kohms unbalanced/balanced, DC coupled Maximum level ...

  • Extron electronic 42 HVA - page 38

    Specifications and Part Numbes, cont’d CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers A-4 Part Numbers CrossPoint part numbers Extron Part Part # CrossPoint 42 HVA 60-504-01 Windows Universal Switcher Control Program 29-031-01 CrossPoint 42 HVA Matrix Switcher User’s Manual 68-654-01 Rack mounting kit 70-077-03 Under desk ...

  • Extron electronic 42 HVA - page 39

    A-5 CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers Assorted connectors BNC connectors BNC Mini HR crimp connectors, qty. 50 100-074-51 BNC Super High Resolution crimp connectors, qty. 50 100-075-51 BNC bulkhead connectors, qty. 50 (for custom wall plates) 100-076-51 Pre-cut cables BNC-4 Mini HR cable is used for RGBS cable ru ...

  • Extron electronic 42 HVA - page 40

    Specifications and Part Numbes, cont’d CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers A-6 ...

  • Extron electronic 42 HVA - page 41

    Cr ossPoint 42 HV A Matrix Switcher B Appendix B Refer ence Information Hardware Upgrades ...

  • Extron electronic 42 HVA - page 42

    Reference Information, cont’d CrossPoint 42 HVA Matrix Switcher • Reference Information B-2 Refer ence Information Hardwar e Upgrade and Maintenance This appendix contains procedures for installing a new firmwar e update and replacing the AC fuse. Opening the switcher Before you can perform the hardwar e upgrade or maintenance procedures, you m ...

  • Extron electronic 42 HVA - page 43

    B-3 CrossPoint 42 HVA Matrix Switcher • Reference Information T o replace the firmware, do the following: 1. Follow the instructions in Opening the switcher on page B-2, to gain access to the interior of your switcher . 2. Remove the four screws at the front edge of the bottom cover , releasing the front panel, then lay the fr ont panel down, wit ...

  • Extron electronic 42 HVA - page 44

    Reference Information, cont’d CrossPoint 42 HVA Matrix Switcher • Reference Information B-4 8 . Ensure that the switcher is working properly . 9. If the switcher was removed fr om a rack, remove its power cord, r eattach the switcher to the rack, and reconnect the power cor d. 10 . Reconnect the input and output cables. Replacing the AC fuse Th ...

  • Extron electronic 42 HVA - page 45

    FCC Class A Notice Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can rad ...

  • Extron electronic 42 HVA - page 46

    Extron Electronics, USA 1230 South Lewis Str eet Anaheim, CA 92805 USA 714.491.1500 F ax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 F ax +31.33.453.4050 Extron Electronics, Asia 135 Joo S eng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 F ax +65.6383.4664 Extron ...

Manufacturer Extron electronic Category Switch

Documents that we receive from a manufacturer of a Extron electronic 42 HVA can be divided into several groups. They are, among others:
- Extron electronic technical drawings
- 42 HVA manuals
- Extron electronic product data sheets
- information booklets
- or energy labels Extron electronic 42 HVA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Extron electronic 42 HVA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Extron electronic 42 HVA, service manual, brief instructions and user manuals Extron electronic 42 HVA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Extron electronic 42 HVA.

Similar manuals

A complete manual for the device Extron electronic 42 HVA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Extron electronic 42 HVA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Extron electronic 42 HVA.

A complete Extron electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Extron electronic 42 HVA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Extron electronic 42 HVA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Extron electronic 42 HVA, that we can find in the current document
3. Tips how to use the basic functions of the device Extron electronic 42 HVA - which should help us in our first steps of using Extron electronic 42 HVA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Extron electronic 42 HVA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Extron electronic 42 HVA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Extron electronic 42 HVA?

Use the form below

If you did not solve your problem by using a manual Extron electronic 42 HVA, ask a question using the form below. If a user had a similar problem with Extron electronic 42 HVA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)