English dropdown-ico

Manual Runco CL-700

33 pages 2.35 mb
Download

Go to site of 33

Summary
  • Runco CL-700 - page 1

    O WNER ’ S O PERA TING M ANU AL CL-700 www.htrgroup.com ...

  • Runco CL-700 - page 2

    ...

  • Runco CL-700 - page 3

    Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’ s Finest Home Theater Product s”. With proper inst allation, setup and care, you should enjoy many years of unparalleled video performance. Please read this consumer protection plan carefully and retain it with your ...

  • Runco CL-700 - page 4

    EFFECTIVE W ARRANTY DA TE: This warranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORT ANT : W ARRANTY REGISTRA TION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we s ...

  • Runco CL-700 - page 5

    R u nco CL-700 Video Pro j ect o r 1 Runco CL-700 Video Projector User’s Manual Thank you for your purchase of this qualit y Runco video projector! It has b een designed to provid e you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menu s a ...

  • Runco CL-700 - page 6

    ...

  • Runco CL-700 - page 7

    1 . Overview User’s Manual 3 1. Overview Features High Contrast and Picture Quality This single-DMD DLP TM projector provides excellent contrast ratio, color uniformity and seamlesss picture quality. Fantastic Dynamic Performance and Rich Gray-scale With a 6-segment color wheel, the picture's refresh rate can attain speeds of up to 240 Hz. B ...

  • Runco CL-700 - page 8

    Location  Front / Upper Side  Rear / Bottom Side 3 2 4 4 1 6 8 9 5 7 4 1. Front Lamp Cover Remove this cover when replacing the lamp. 2. Projection Lens 3. Front IR Sensor 4. Ventilation Holes (exhaust) 5. Focus Ring and Zoom Ring Adjusts the focus and zoom of image. 6. Power LED and Lamp LED Show the status of power and lamp. For more detail ...

  • Runco CL-700 - page 9

    1. Overview 5 Controls and Functions ❚ Control Panel 1. POWER LED Indicate the status of the pow er ■ Oran g e w h en the AC p ower cord is pl u gged i n to the wa l l o u t l et (standby mode). O n ce in the standby mode, you ca n turn on the projector by pressin g ON key on the remote control for ONE second. ■ Green when the power is turned ...

  • Runco CL-700 - page 10

    1. Overview 6 ❚ Connector Panel 1. Video (RCA Jack) Composite video si gnal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) sig nal input 3. Component (RCA Jacks) 480i Component (Y/C B /C R ) video signal input 4. RGB/ H DTV (BNC) or Progressive Scan DVD players DTV Y/P B /P R or DTV RGB vide o signal input. 5. Computer (D-Sub 15-pin) RGB Comput ...

  • Runco CL-700 - page 11

    1 . Overv iew 7 Remote Control CUSTOM Recall memory 1~3 sequentially (see "Selecting Video Memory" on page 16) PICTURE Access the Picture Setting menu (see "PICTURE Setting Page" on page 18) ARROW ( , , , ) Use to select the menu or to make various adjustments. ENTER Enter the setting of items in the menu. EXIT Exit and save the ...

  • Runco CL-700 - page 12

    2. Installation 8 2. Installation Remote Control Notes on Batteries ■ Make sure that the battery polarities ar e correct when installing the batteries. ■ Do not mix an old battery with a new one or different types of batteries. ■ If you will not use the remote control for a long time , remove the batteries t o avoid damage from battery leakag ...

  • Runco CL-700 - page 13

    2. Installation 9 ❚ Adjust the Lens Z oom/Focus ring ❚ Adjust the height Adjust the projected image size you need with the zoom ring on the lens. To focus the image, ro tate the focus ring on the lens. There are 4 screw adjusters on the bottom of this unit. You can adjust t he height or projection angle of this unit by u sing these adjusters. Z ...

  • Runco CL-700 - page 14

    Screen __________ (H) x __________ (W) C) VERTICAL OFFSET : For Standard Throw Lens Option: 2 inches T wo inches offset means that the center of the projection lens is 2" above the top of the screen (inverted ceiling mount) or 2" below the bottom of the screen (upright floor mount). B) THROW DIST ANCE: CL-700 16 x 9 Screens (Standard Thro ...

  • Runco CL-700 - page 15

    Installa tion with Shor t Lens Option 10-A 2. Installation Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length Base plate to center of lens 2.78 in. (70.64 mm) 4.6 in. (1 17.7 m) 5.1 in. (130.2 mm) Ceiling Floor Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length 2.78 ...

  • Runco CL-700 - page 16

    CL- 700 @ 1280 x 720 w ith Standard L ens Scr een Hei ght Scr een W idth Mi n Throw Di stance Max Thr ow Distance Vertical Off set P os i tion 40.5 72 144.18 173.02 2" V ertical Off set 43 77 153.08 183.70 2" V ertical Off set 45 80 160.20 192.24 2" V ertical Off set 47 84 167.32 200.78 2" V ertical Off set 49 87 174.44 209.33 2 ...

  • Runco CL-700 - page 17

    3. Connecting 12  3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers. This projector is not equipped with speakers. Connecting Video Inputs Video / S-Vid ...

  • Runco CL-700 - page 18

    3. Connecting 13 ❚ Progressive Comp onent (DTV Y/P B /P R ) ❚ RGBHV (DTV RGB) The RGB BNC input supports two kinds of HD TV formats: Progressive component (DTV Y/P B /P R ) and DTV RGB. The unit will auto detect the resolution automatically. G/Y B/P R/P H V BR YCC RS-232C 12V BR Trigger S-Video Computer Video DTV Source G/Y B/P R/P H V BR YCC R ...

  • Runco CL-700 - page 19

    3. Connecting 14 Connecting a Computer This unit only supp orts resolutions up to XGA. If the input signal is greater tha n XGA, the projector will display a warning message. S-Video Computer G/Y B/P R/P H V BR Trigger Video Y C C RS-232C 12V BR PC or Notebook ...

  • Runco CL-700 - page 20

    4. Basic Operation 15 4. Basic Operation Turning on the Power Zoom/ Focusing Selecting Input Source ■ The Power LED lights orange when power is applied and the power switch is turned on. ■ Press and hold the ON key on the remote control for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then light solid g ...

  • Runco CL-700 - page 21

    4. Basic Operation 16 Selecting "ASPECT ratio" Selecting Video Memory Setting Menu ■ Select the proper Aspect Ratio according to the format of signal content. There are four Aspect Ratio for choice: ■ ANAMORPHIC: 4:3 image is stret ched horizontally to fit the 16: 9 screen. This is for 16: 9 DV Ds. ■ 4 X 3: The input s ignal will be ...

  • Runco CL-700 - page 22

    ACTIVE PIP- PIP LIGHT PIP+ ON VIDEO S-VIDEO COMPONENT COMPONENT HD RGB HD PC OFF PIP Function * Press the PIP button to enable the PIP function * For PIP purposes, there are two groups of inputs separated by their display modes: Video Group: V ideo, S-Video and Component Y/C B /C R inputs Graphic Group: HDTV input and Computer input. * The PIP can ...

  • Runco CL-700 - page 23

    5. Men u 18 5. Menu Using the Menu T h is u n it is e q u ip p ed with a n on scr ee n d isp la y ( O SD ) m en u f or m a kin g va r iou s a d ju stm en ts a n d se ttin g s. T h er e a r e 3 d if f er en t m en u la n g u a g es; p a g e 21 La n g u a g e se ttin g f o r m or e d eta ils .  Pr ess t h e M EN U b u t ton to tu r n on / o f f th ...

  • Runco CL-700 - page 24

    5. Men u 19 5. T IN T : A d ju st color to n es ( 0 ~ 30) . T h e h ig h er th e se ttin g , th e p ic tu r e b ec om es g r ee n ish . T h e low er th e se t ti n g , th e p ictu r e b ec om es p u r p lis h . 6. C O L O R T EMP .: A d ju st th e color tem p er a tu r e.  0 : T h e d ef a u lt color tem p er a t u r e o f la m p .  1 : Low c ...

  • Runco CL-700 - page 25

    5. Menu 20 Active Image Area Active Image Area 16:9 Screens: LETTERBOX: The image in the Letterbox mode will be stretched vertically, and the top and bottom portion 'blanked off'. This ratio is best suited for LaserDisc movies or non-anamorphic DVD's. VIRTUAL WIDE: A 4:3 image is horizontally stretched non-linearly to allow a 4:3 ima ...

  • Runco CL-700 - page 26

    5. Men u 21 ENVIRONMENT Setting Page In th is Me n u, th e g lob a l se ttin g s for th e p r oj ec tor ca n b e m a d e. T h er e a r e 5 M en u I te m s: D E F A U L T — LA M P T IME R — B A C K L IG H T — A U T O O FF — LA MP H O U R S. 1. D EFA U LT : L oa d th e d ef a ul t va lu e of cu r r en t in p u t sou r ce . 2. LA MP T I M ER : ...

  • Runco CL-700 - page 27

    6. Additional Information 22 6. Additional Information Warning Message Rep l ace the Lamp (Contact your Runco Dealer) ■ It is normal for lamp to be darker when this unit has been used for a period of time. ■ " Lamplife is expired ! Please change a new lamp. And reset the lamp timer " message will be displayed for 30 seconds on the scr ...

  • Runco CL-700 - page 28

    6. Additional Information 23 Troubleshooting 10. Tighten th e th ree screws of lamp shield. 11. Put on the front lamp cover. 12. Tighten th e screw of front lamp cover. 13. Turn on the power and go into Environmen t Setting Page to reset the "Lamp Timer " item. Problem Possible Cause Remedy This unit does not turn on. There is no power fr ...

  • Runco CL-700 - page 29

    Spec ifica tions Proje ctor Type: Digit al Li ght Processing™ (DLP™ ) Nati ve Resolutio n: 1280 x 720 Vide o Sta ndards : NTSC, N TSC 4.43, PAL -M, PAL-N, SECA M Lam p: 210W Lam p Life: 1000 hours Pict ure Size: 40” to 300” diagonal Th row D i stance: Standar d Throw Lens: 2.00 - 2. 40 x screen widt h Short T hrow Lens opt ion: 1. 33 - 1.60 ...

  • Runco CL-700 - page 30

    Dimensions Unit: in. (mm) 15.75 in. (400 mm) 1.6 in. (4.5 mm) 1.4 in. (35.26 mm) 13.09 in. (332.5 mm) 6.3 in. (160 mm) 5.9 in. (150 mm) 7.93 in. (201.5 mm) 13.66 in. (347 mm) 4.6 in. (117.7 mm) 5.1 in. (130.2 mm) 6. Additional Information 25 User's Manual + 9.66 in. (245.43 mm) 2.78 in. (70.64 mm) ...

  • Runco CL-700 - page 31

    RS-232C Control Codes Code Function X01 Power On X02 Power Off X03 Message On X04 Message Off X10 Menu (arrow key) X11 Enter (arrow key) X12 Exit (arrow key) X13 Up (arrow key) X14 Down (arrow key) X15 Left (arrow key) X16 Right (arrow key) X20 Switch to Composite input X21 Switch to S_Video input X22 Sw ...

  • Runco CL-700 - page 32

    ...

  • Runco CL-700 - page 33

    RUMA-009600 rev 9-02 Runco International . 2900 Faber S treet . Union City , CA 94587 . ph (510) 324-7777 . fax (510) 324-9300 . www .runco.com ...

Manufacturer Runco Category Projector

Documents that we receive from a manufacturer of a Runco CL-700 can be divided into several groups. They are, among others:
- Runco technical drawings
- CL-700 manuals
- Runco product data sheets
- information booklets
- or energy labels Runco CL-700
All of them are important, but the most important information from the point of view of use of the device are in the user manual Runco CL-700.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Runco CL-700, service manual, brief instructions and user manuals Runco CL-700. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Runco CL-700.

Similar manuals

A complete manual for the device Runco CL-700, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Runco CL-700 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Runco CL-700.

A complete Runco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Runco CL-700 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Runco CL-700, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Runco CL-700, that we can find in the current document
3. Tips how to use the basic functions of the device Runco CL-700 - which should help us in our first steps of using Runco CL-700
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Runco CL-700
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Runco CL-700 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Runco CL-700?

Use the form below

If you did not solve your problem by using a manual Runco CL-700, ask a question using the form below. If a user had a similar problem with Runco CL-700 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)