English dropdown-ico

Manual Jumpking YJ

21 pages 3.85 mb
Download

Go to site of 21

Summary
  • Jumpking YJ - page 1

      YJ USA Corp., 3970 Lindbergh Drive Adison, TX 75001 WARNING www .jumppod.com 877-928-8777 ...

  • Jumpking YJ - page 2

    3  ...

  • Jumpking YJ - page 3

    3. Place the trampoline and trampoline enclosure on a level surface before use. 4. Must place the trampoline on lawn, bark wood chip, sand or cushioning materials. 5. Adequate overhead clearance is essential. A minimum of 7.3 m (24 ft) from ground level is recommended. Provide clearance for wires, tree limbs, and other possible hazards. 6. Maintain ...

  • Jumpking YJ - page 4

    5    25. Do not attach anything to the barrier that is not a manufacturer approved accessory or part of the enclosure system. 26. Wear clothing free of drawstrings, hooks, loops, or anything that could get caught in the barrier . 27. Enter and exit the trampoline enclosure only at the door designed for that purpose. 28. Do not attempt to c ...

  • Jumpking YJ - page 5

    6 Note: The ...

  • Jumpking YJ - page 6

    ...

  • Jumpking YJ - page 7

    ...

  • Jumpking YJ - page 8

    ...

  • Jumpking YJ - page 9

    ...

  • Jumpking YJ - page 10

    the sharply spot. ...

  • Jumpking YJ - page 11

    ...

  • Jumpking YJ - page 12

    ...

  • Jumpking YJ - page 13

     ...

  • Jumpking YJ - page 14

    15 1. Make sure you understand the information in the box at the top of this page before you begin assembling the trampoline. Lay three T op T ubes (1), (2) and (3) on the ground as shown. Make sure there is a T-connector (4) on T op Tube (1, A marking with bigger end), Socket(7) on the Top Tube(2, B marking with bigger end) and T-connector(4) on t ...

  • Jumpking YJ - page 15

    16  F rame Holes V-rings 8 10 10 10 10 S p r i n gs (10) 22 Hook the V-ring      V-ring 8 10 10 F rame Black webbing with yellow line No yellow line 3. Lay the Bed (8) on the ground inside of the assembled frame. Make sure that the two warn- ing decals (not shown) are on top of the Bed. Note: There are V -rings around the edge ...

  • Jumpking YJ - page 16

    17 4 4. Lay the Frame Pad (9) on the frame. Do not use the trampoline without the Frame Pad (9) , which is designed to reduce the likelihood of injury to the user from coming in con- tact with the trampoline frame. If you do not have a Frame Pad, call our Customer Hot Line toll-free at 877-927-8777, Monday-Friday,8 a.m. -5 p.m. Central Time.(Exclud ...

  • Jumpking YJ - page 17

    6. Using the included plastic tie, attach the Safety Placard (11) to the frame near the point where jumpers will climb onto and off the trampoline. The trampoline is now fully assembled. Make sure that all parts are securely attached. Familiarize yourself and all users of the tram- poline with the safety precautions, use and instructional materials ...

  • Jumpking YJ - page 18

    10. Attach the other three Pole(16,17) in the same way. See inset drawing. 10    19    1 1. Lay out T op G3 Pole (18), joint each section Connector to a straight line as shown. Assemble the remaining T op G3 Pole (18) in the same way . Spread the Netting (20) on the trampoline bed, insert a T op G3 Pole (18) into the o ...

  • Jumpking YJ - page 19

    13. Note: During steps 14 and 15, you will “sew”the lower edge of the Netting(20) to the V -rings on the bed using the Cords(25). Locate the V -ring closest to the door . Thread one end of a Cord(25)through the lower edge of the Netting(20)above the V -ring and then thread the Cord through the V -ring. T ie the Netting to the V -ring, by making ...

  • Jumpking YJ - page 20

    22 It is possible for the trampoline/enclosure be blown about by high wind. If you anticipate high winds, the trampoline/enclosure should be moved to a sheltered location, disassembled, or tied down to the ground with ropes and stakes (not included). At least three ropes and three stakes should be used. The tops of the stakes should be at ground le ...

  • Jumpking YJ - page 21

    1 4 T op T u be(With T-connector, A marking) 2 4 Top Tube(With Socket, B marking) 3 4 Top Tube(With T-connector, C marking) 4 8 T-Connector 5 8 Leg Extension 6 4 Center 7 4 Socket 8 1 Stitched Bed with V-ring 9 1 Frame Pad 15 8 U-bolts 16 4 Straight Tube 17 4 Top Tube 18 2 G3 Pole (Black) 10 60 Springs 19 4 Plastic Cap ( This part has been atta- ch ...

Manufacturer Jumpking Category Fitness Equipment

Documents that we receive from a manufacturer of a Jumpking YJ can be divided into several groups. They are, among others:
- Jumpking technical drawings
- YJ manuals
- Jumpking product data sheets
- information booklets
- or energy labels Jumpking YJ
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jumpking YJ.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jumpking YJ, service manual, brief instructions and user manuals Jumpking YJ. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jumpking YJ.

Similar manuals

A complete manual for the device Jumpking YJ, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jumpking YJ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jumpking YJ.

A complete Jumpking manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jumpking YJ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jumpking YJ, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jumpking YJ, that we can find in the current document
3. Tips how to use the basic functions of the device Jumpking YJ - which should help us in our first steps of using Jumpking YJ
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jumpking YJ
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jumpking YJ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jumpking YJ?

Use the form below

If you did not solve your problem by using a manual Jumpking YJ, ask a question using the form below. If a user had a similar problem with Jumpking YJ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)