-
GoVideo DV1030 - page 1
DV1030 User’ s Guide DC-B86B1N-PS 04.5.20 9:28 PM 페이지A ...
-
GoVideo DV1030 - page 2
PRODUCT INFORMA TION 1 I MPORT ANT S AFEGUARDS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the ...
-
GoVideo DV1030 - page 3
2 This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaire ...
-
GoVideo DV1030 - page 4
PRODUCT INFORMA TION 3 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, connection to grounding electrodes, and requirements for the groun ...
-
GoVideo DV1030 - page 5
4 F EA TURES ... • DVD, VCD, MP3 on CD-R/RW , and VHS playback • W atch DVD and Record TV at the same time • Multi-function remote control (VCR, DVD) • V ideo Index Search System (VISS) • Multi-channel T elevision Sound (MTS) playback/record • High Quality 6-Head Hi-Fi Sound • One T ouch Recording (OTR) • Progressive Scan • MP3 pl ...
-
GoVideo DV1030 - page 6
PRODUCT INFORMA TION 5 R EAD C AREFULLY B EFORE U SING Please read carefully before using this DVD player. Placement and handling • The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc. • Do not use vola ...
-
GoVideo DV1030 - page 7
6 C ONTENTS Important Safeguards ................................ 1 Features... ................................................. 4 Read Carefully Before Using ..................... 5 Contents ................................................... 6 Identification of Controls .......................... 7 Remote Control ................................ ...
-
GoVideo DV1030 - page 8
PRODUCT INFORMA TION 7 I DENTIFICA TION OF C ONTROLS ! √ Power button Use to power the device on/off if AC power supply is connected. @ Use to insert videotape # Disc tray $ V ideo input jack % Audio input jacks ^ VCR Eject button & Record button * Channel DOWN/UP buttons ( Operation Display Window Displays the status of device. For more info ...
-
GoVideo DV1030 - page 9
8 Operation Display W indow I DENTIFICATION OF C ONTROLS Timer Recording on Standby Timer Recording Error Recording in Progress Timer Recording in Progress Recording Pause Repeat one chapter Repeat all chapters Repeat a defined period from A Repeat a defined period from A to B - RECORDING MODE - - REPEA T MODE - DVD playback Fast playback Fast reve ...
-
GoVideo DV1030 - page 10
9 PRODUCT INFORMA TION I DENTIFICATION OF C ONTROLS Rear Panel DVD ONLY DVD + VCR AUDIO OUT R L R L Y Pr Pb DIGITAL AUDIO OUT COAXIAL COMPONENT VIDEO OUT VIDEO OUT VIDEO 1 IN IN (FROM ANT.) OUT (TO TV) RF S-VIDEO OUT AUDIO VIDEO ! ( @ ^ * & $ # % ! Power Cord Connect to wall outlet. @ Digital Output (COAXIAL) Jack Connect to digital receiver/ a ...
-
GoVideo DV1030 - page 11
10 R EMOTE C ONTROL Switches the DVD+VCR on or off. [DVD] Opens/closes the disc tray, [VCR] Ejects a tape Changes to VCR mode. Changes to DVD mode. Selects the devices connected to the Audio/Video sockets (AV1, AV2, DVD, VCR ). Number entry [VCR] Manually reduces of streaks or picture "jitter". [DVD] Activates Progressive Scan button, [VC ...
-
GoVideo DV1030 - page 12
11 PRODUCT INFORMA TION Press the [POWER √ ] button on the remote control for about 8 seconds. All front panel and remote control buttons are now locked, and the Lock indicator (“ ”) will be displayed on window display. To release child lock, press the [POWER √ ] button again for about 8 seconds. Child Lock!!! Starts playing a disc or a tap ...
-
GoVideo DV1030 - page 13
12 V arious methods of connecting your TV AUDIO VIDEO S-VIDEO ANT INPUT S-VIDEO INPUT A/V INPUT COMPONENT INPUT CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN 2018 16 14 12 10 8 6 4 3 21 19 17 1 ...
-
GoVideo DV1030 - page 14
13 INST ALLA TION C ONNECTING A C ABLE B OX How to connect INPUT 1 IN OUT ANT IN INPUT 2 DVD + VCR R L VIDEO OUT VIDEO 1 IN IN (FROM ANT.) OUT (TO TV) RF AUDIO VIDEO How to watch regular TV and record Cable TV 1 Set the Channel Select switch on your cable Box to CH 3. If Channel 3 is used by a local TV station, you must change it to Channel 4. 2 Se ...
-
GoVideo DV1030 - page 15
14 C ONNECTING O THER V IDEO E QUIPMENT How to Connect AUDIO VIDEO ANT INPUT A/V OUTPUT CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN 201816 14 12 10 86 4 3 211917 15 13 11 97 5 31 DVD ONLY DVD ...
-
GoVideo DV1030 - page 16
15 INST ALLA TION How to Connect C ONNECTING TO A S TEREO R ECEIVER AUDIO ANT INPUT AUDIO INPUT CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN 2018 16 14 12 10 8 6 4 3 21 19 17 15 13 11 97 5 3 1 ...
-
GoVideo DV1030 - page 17
16 C ONNECTING TO A D OLBY D IGIT AL DECODER OR DTS DECODER How to Connect AUDIO COAXIAL ANT INPUT AUDIO INPUT DIGIT AL AUDIO INPUT CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN 20 18 16 14 12 ...
-
GoVideo DV1030 - page 18
17 INST ALLA TION Press the [DVD] button. "DVD" lights on the operation display window and all remote control buttons control the DVD player. To Select VCR Press the [VCR] button. "VCR" lights on the operation display window and all remote control buttons control the VCR. To W atch TV or Exter nal Input Press the [TV VIEW] butto ...
-
GoVideo DV1030 - page 19
18 DVD P LA YBACK Press [POWER √ ] to turn on the unit. Press [DVD] to select DVD mode. Press [EJECT] to open the disc tray . Press [EJECT] to close the tray . The disc tray is closed and many discs will start playback automatically. 1 2 Place your disc in the center of the disc tray , with the label facing upward. 3 4 T o start playback, press [ ...
-
GoVideo DV1030 - page 20
BASIC OPERA TION 19 Which discs you can use DVD Video (Digital Versatile Disc) DVD-R (DVD-Recordable) DVD-RW (DVD-Rewritable) Audio CD (Compact Disc Digital Audio) Video CD (format 1.0/1.1./2.0) Super Video CD CD-R (CD recordable) Audio/ MP3 contents CD-RW (CD rewritable) Audio/ MP3 contents Regional code If the region number described on the DVD d ...
-
GoVideo DV1030 - page 21
20 Press [POWER √ ] to turn on the DVD/VCR. Press [VCR] to select VCR mode. Insert the desired tape. T o start playback, press [PLA Y]. If the picture is flickering or poor quality, adjust it with the [TRK +/–] buttons. 1 2 3 T o stop playback, press [ ]. To pause playback, press [PLAY]. Press [PLAY] again to resume playback. 4 Press [VCR EJECT ...
-
GoVideo DV1030 - page 22
21 BASIC OPERA TION C LOCK S ET Press [SETUP]. Press [ENTER] to select “CLOCK SET”. “Time and Date Set” is already selected. Press [ENTER]to set the time and date. Set the current date and time by pressing [ œ √…† ] keys or pressing the [0-9] keys. For TIME SET, follow the order of Hour / Minute ; for DATE SET, follow the order of Mo ...
-
GoVideo DV1030 - page 23
22 To Memorize Channels Manually ■ To add channels manually: Press [VCR], then press [SETUP] and select “CHANNEL SET”. Select “Add/Remove Channels”. 1 Select the desired channel and memorize it. Use the [0-9] buttons to select the desired channel. When [ √ ] is pressed, “REMOVED” under the channel number changes to “ADDED”. 2 Ch ...
-
GoVideo DV1030 - page 24
23 VCR OPERA TION To Delete Channels Manually ■ To delete memorized channels: ■ This feature is useful if your cable signal goes out because it allows you to switch to a regular antenna for alternate television reception. ■ This feature is useful if your cable signal goes out. It allows you to switch to a regular antenna for alternate televis ...
-
GoVideo DV1030 - page 25
24 To W atch Another TV Channel or DVD while recording 1 If you want to watch another TV channel during recording, press [TV/VCR]. Select the desired channel by using the TV's remote control or channel buttons. If you use the DVD/VCR buttons to change channels, you will record the channel you are watching. 2 If you want to playback a DVD durin ...
-
GoVideo DV1030 - page 26
25 VCR OPERA TION This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineer ...
-
GoVideo DV1030 - page 27
26 T IMER R ECORDING T imer Recording Press [SETUP] and select “TIMER RECORDINGS”. Move to “TIMER RECORDINGS” with [ † ] and press [ENTER]. Select “Make a New Program”. Press [ENTER] to select “Make a New Program”. 5 T urn on the TV . 1 Make sure the current time is set correctly (see page 21 for instructions on setting the clock) ...
-
GoVideo DV1030 - page 28
27 VCR OPERA TION Set "T ape Speed". Select either SP, SLP or AUTO with [ † ] or [ … ]. For more information on recording speed, see “Using video cassette” on page 28. 10 Press [SETUP] to complete the Timer Recording. “Program # has been saved. For program recording, insert a cassette....” message is displayed. TIMER RECORDING ...
-
GoVideo DV1030 - page 29
28 Using V ideo Cassettes Before you play or record on a video cassette tape, please read this information on the proper care and use of video cassettes. Use only video cassettes that bear the VHS mark: $ . There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at ...
-
GoVideo DV1030 - page 30
29 VCR OPERA TION W A TCHING AND R ECORDING C ABLE TV T urn on the cable box and then set a channel to watch or to record. T urn on the DVD+VCR and then set the DVD+VCR channel connected to the converter (CH03/04/EXTERNAL INPUT). Power on TV and then set the channel connected to the DVD+VCR (CH03/04/VCR). Recording while W atching With the setup de ...
-
GoVideo DV1030 - page 31
30 U SING A DV ANCED VCR F EATURES Auto Playback ■ With Auto Play turned on (the factory default setting), the DVD+VCR player automatically starts playback when you insert a tape with its safety tab removed. Press [SETUP] and select “FUNCTIONS”. Move to “FUNCTIONS” with [ † ] and press [ENTER]. Press [ENTER] to switch between ON and OFF ...
-
GoVideo DV1030 - page 32
31 VCR OPERA TION Press [SETUP] and select “FUNCTIONS”. Select “Index Search”. 1 ■ When you record a program, the VCR places an index mark at the start of the recording. To search for an index mark: FUNCTIONS If you want to scan through a certain number of index marks, use the number buttons to enter the number of marks you want to search ...
-
GoVideo DV1030 - page 33
32 Changing the setup menu language Press [SETUP] button and select “LANGUAGE SELECT”. 1 Set the language to English, Spanish or French and [ENTER]. 2 ■ You can set the language for VCR Setup menus to English, Spanish, or French. ■ Auto Clock Set automatically adjusts the DVD/VCR clock for Daylight Savings Time (DST) every spring and fall. ...
-
GoVideo DV1030 - page 34
33 VCR OPERA TION On-Screen Display (O.S.D) 1 Press [DISPLAY] to display the tape counter, clock and status mode on the TV screen. 2 Press [DISPLAY] again to view just the tape counter. REPLA Y function Replays the previous 15 seconds of videotape. LAST CHANNEL function Returns to the previous TV channel which was being watched. SKIP function Skips ...
-
GoVideo DV1030 - page 35
34 H I -F I S TEREO P LA YBACK Playing a tape in Hi-Fi high-quality • “Hi-Fi” appears at the top of the screen. • Pressing [AUDIO] changes the audio track as follows: If there is noise in the recording, please select “Linear” to reduce it. Forced Mono Recording Stereo or Secondary Audio Programs (SAP) • In some cases reception is poor ...
-
GoVideo DV1030 - page 36
35 VCR OPERA TION P LA YING A D ESIRED S CENE To skip scenes on a disc T o skip to the next chapter (or track), press [ √√ ❚ ]. The current chapter (or track) skips to the next chapter (or track). T o skip to the previous chapter (or track), press [ ❚ œœ ]. The current scene skips to the previous chapter (or track) or to the first scene o ...
-
GoVideo DV1030 - page 37
P LAYING A D ESIRED S CENE 36 Repeating chapters, titles, and tracks DVD, VCD, CD, MP3 • CHAPTER : Current chapter will play repeatedly. • TITLE : Current title will play repeatedly. • TRACK : Current track will play repeatedly. • DISC : Current disc will play repeatedly. • REPEAT ONE : Current file will play repeatedly. • REPEAT ALL : ...
-
GoVideo DV1030 - page 38
37 DVD OPERA TION P LAYING A D ESIRED S CENE Searching a DVD by T itle, Chapter or T ime DVD VCD Searching VCD by T rack or T ime If you want to search for a title number , press [SEARCH] once. The current and total number of titles are displayed. Use the [0-9] buttons to enter the desired title number. 1 If you want to search for a time, press [SE ...
-
GoVideo DV1030 - page 39
38 P LAYING A D ESIRED S CENE DVD Storing bookmarks in memory to be viewed (listened to) again ■ Storing a bookmark in the DVD memory is similar to marking your page in a book. It allows you to quickly return to any point on the disc. Marks are not permanent. They are erased from the DVD memory when you eject the disc or power off the DVD. Storin ...
-
GoVideo DV1030 - page 40
39 DVD OPERA TION C ONFIRMING C URRENT PLA Y M ODE While in Play mode, press [DISPLA Y]. The current disc mode is displayed. If you want to change the mode, select the item with [ … ] or [ † ] and enter the new settings with the [0-9], [ œ ] or [ √ ] buttons. When finished with each change, press [ENTER]. To exit Display mode, press [DISPLAY ...
-
GoVideo DV1030 - page 41
Using the zoom function DVD, VCD, CD Selecting 3D Audio DVD, VCD DVD V iewing Different Angles Press [3D]. Every time you press [3D], the 3D sound toggles between 3D ON ➝ 3D OFF. ■ You can enjoy a virtual 3D sound effect from 2-channel sources. ■ You can enlarge the current screen 2 or 4 times. Keep pressing [ZOOM] until the preferred level o ...
-
GoVideo DV1030 - page 42
41 DVD OPERA TION Playing a disc containing MP3 files MP3 A BOUT MP3, JPEG DISCS ■ This unit will play MP3 files recorded on CD-R and CD-RW discs. Press [EJECT] to open the disc tray . Place a disc with MP3 files on the disc tray with the label side up. Press [EJECT] to close the disc tray . The DVD+VCR will load the disc and display the director ...
-
GoVideo DV1030 - page 43
42 The ability of this unit to read MP3 discs is dependent on the following: • The Bit Rate must be within 64-256 kbps. • The maximum number of directories should not exceed 32. • The maximum depth level of directories should not exceed 4. • If a file is recorded with a variable bit rate (VBR) (Example : 54~256kbps) distortion may occur dur ...
-
GoVideo DV1030 - page 44
43 DVD OPERA TION Playing a disc containing JPEG (PHOTO) files JPEG ■ This unit will play JPEG files recorded on CD-R and CD-RW discs. It will also play JPEG files recorded on DVD, DVD-R, DVD-RW, and DVD+RW. Select the desired folder . Move the cursor to the desired folder by pressing [ …† ] and press [ENTER] to confirm. 1 Slideshow Delay Tim ...
-
GoVideo DV1030 - page 45
44 D ISPLA YING D ISC M ENUS Press [TITLE] or [MENU]. • The disc menu is displayed. These menus vary by disc. (“Return” will appear on the OSD with VCD2.0.) • If it is a VCD2.0, select PBC ON mode by pressing [TITLE]. * CD and VCD1.1 do not have menus. 1 Move the cursor to the desired menu item with [ œ √…† ] and select with [ENTER] ...
-
GoVideo DV1030 - page 46
45 DVD OPERA TION DVD LANGUAGE S ETUP Selecting an OSD language. Select a OSD language to be displayed on DVD menus with [ENTER]. 2 Selecting an AUDIO language. Set your preferred audio language with [ENTER]. If the audio language is set and recorded on the DISC, it is automatically played in the set language every time it is played. OTHERS - - - - ...
-
GoVideo DV1030 - page 47
46 Selecting a DISC MENU language. Set your preferred DISC MENU language with [ENTER]. If the DISC MENU language is set and recorded on the DISC, it is automatically played in the set language every time it is played. OTHERS - - - - : Another language can be selected. You can input 4-digit language code. Refer to the language codes. Press [CLEAR] i ...
-
GoVideo DV1030 - page 48
47 DVD FEA TURE SETUP VIDEO S ETUP Selecting TV ASPECT. If you select “4:3 LB”, you can watch the original widescreen movie, but black bars will appear above and below the picture. If you select “4:3 PS”, the picture will fill the screen but the sides of the movie will be cropped. If a disc size was recorded in 4:3, you cannot watch it in w ...
-
GoVideo DV1030 - page 49
Selecting DIGIT AL OUT . Set audio output to coaxial or optical. You can set the outgoing digital signal to BITSTREAM or LPCM: • BITSTREAM : The raw audio signal recorded on the disc goes to the digital audio output. • LPCM : The decoded audio signal goes to the digital audio output. 2 ■ To set the DVD+VCR to match the capabilities of your au ...
-
GoVideo DV1030 - page 50
49 DVD FEA TURE SETUP Selecting P ARENT AL. Press [ √ ] when the cursor highlights PARENTAL. When “INPUT PASSWORD” appears on the screen, enter your password. And confirm with [OK]. Change Parental Rating level. After you have entered the correct password, you can change the PARENTAL rating by pressing [ …† ]. Confirm your choice by press ...
-
GoVideo DV1030 - page 51
50 Changing a password. To change your password, move the cursor to “PASSWORD” and press [ √ ]. Enter your current password. Then enter a new password and press [ENTER]. Confirm the new password by typing it again. Now your password is changed. 6 OSD SCREEN SAVER DEFAULTS PARENTAL PASSWORD INPUT PASSWORD - - - - OK CANCEL OSD SCREEN SAVER DEF ...
-
GoVideo DV1030 - page 52
51 DVD FEA TURE SETUP HELP A BOUT DVD Playable Discs • DVD, Video CD (Version 1.1, 2.0), S-VCD and Audio CD Disc type Playable Restriction DVD Yes Region number 1 or Region number All Video CD Yes Version 1.0/1.1/2.0, SVCD CD Yes PCM CD-G Yes Only Audio playback CD-ROM Yes MP3 File CD-R Yes Video-CD/CD/CD-ROM (MP3 File) CD-RW Yes Video-CD/CD/CD-R ...
-
GoVideo DV1030 - page 53
52 CHAPTER Information recorded on a DVD. A title on a DVD is divided into many tracks, each of which are referred to as chapters. Each chapter is numbered and can be searched using its number. TITLE Information recorded on a DVD. A DVD can be divided into may titles. TRACK Information recorded on a video CD or audio CD. A disc consists of many tra ...
-
GoVideo DV1030 - page 54
53 HELP How to use a head cleaner • If you use an old or contaminated videotape, the picture may not be clear due to contamination of the VCR heads. Remove contaminants using a head-cleaner as described below. 1 Insert a head-cleaner tape into the VCR. 2 Press [PLAY] for 5 seconds, and then press [FF] for about 10 seconds. 3 Eject the head-cleane ...
-
GoVideo DV1030 - page 55
54 T ROUBLESHOOTING (DVD) • The player does not play. • No sound. • A disc is playing but screen does not appear or poor screen appears. • Sound is irregular. • Remote control does not work. • Dolby Digital sound does not work • [AUDIO] or [SUBTITLE] button does not work. • [ANGLE] button does not work while a DVD is playing. •“ ...
-
GoVideo DV1030 - page 56
55 HELP Checks Symptom T ROUBLESHOOTING (VCR) •“ Power On ” does not work. • Unit does not work even in “ Power On ” . • A videotape will not insert. • On inserting a videotape, the tape is re-ejected. • A videotape is not ejected. • A channel on video and a play screen does not appear. • Noise (screen noise) appears on screen ...
-
GoVideo DV1030 - page 57
56 Checks Symptom T ROUBLESHOOTING (VCR) • A screen in Pause mode is shaking or slow playback is not clear. • The unit will not record a TV program. • When [REC] is pressed, the videotape is immediately ejected. • Timer recording from Cable TV does not work. • In spite of pressing [CH+/-], a channel can not be set. • Screen is distorted ...
-
GoVideo DV1030 - page 58
57 HELP DVD Audio output standards S PECIFICA TIONS Power requirement AC 120V, 60Hz Power consumption 24W (supplementary 4W) Weight 9.9 lbs (4.5kg) Dimensions (WxHxD) 17.1" x 3.7" x 10.0" (435mm x 93mm x 255mm) Operating temperature 41°F~95°F (5°C~35°C) Installation conditions Horizontal / Relative humidity under 80% Channel cove ...
-
GoVideo DV1030 - page 59
P/N : 97P95600N0-B7 DC-B86B1N-PS 04.5.20 9:29 PM 페이지5 8 ...
Do you have a question concerning GoVideo DV1030?
Use the form below
If you did not solve your problem by using a manual GoVideo DV1030, ask a question using the form below. If a user had a similar problem with GoVideo DV1030 it is likely that he will want to share the way to solve it.