English dropdown-ico

Manual Giant MP4130HT(C)

12 pages 0.41 mb
Download

Go to site of 12

Summary
  • Giant MP4130HT(C) - page 1

    Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual Contents: Installation Instructions: page 2 Pump Specifications: pages 3 Exploded View: page 4 Parts List / Kits: page 5 Repair Instructions: page 6-10 Torque Specifications: page 10 Trouble Shooting: page 11 Dimensions: back page Warranty Information: back page Mode l M ...

  • Giant MP4130HT(C) - page 2

    2 INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for ass ...

  • Giant MP4130HT(C) - page 3

    3 MP4130HT(C) PULLEY SELECTION AND HORSEPOWER REQUIREMENTS PUMP PULLEY MOTOR PULLEY RPM GPM GPH 300 PSI 600 PSI 725 PSI 900 PSI 1200 PSI 9.75" 2.50" 400 5.6 335 1.2 2.3 2.8 3.5 4.7 9.75" 3.00" 500 7.0 419 1.5 2.9 3.5 4.4 5.8 9.75" 3.60" 600 8.4 503 1.8 3.5 4.2 5.3 7.0 9.75" 4.15" 700 9.8 587 2.0 4.1 4.9 6.1 8 ...

  • Giant MP4130HT(C) - page 4

    4 Exploded V iew - MP4130HT(C) ...

  • Giant MP4130HT(C) - page 5

    5 ITEM PART# DESCRIPTION QTY. 36 07267 Snap Ring 3 39 07271 Pressure Ring 6 40 06137 V-Sleeve 9 41 07273 Support Ring 6 42 07353 Tension Spring 3 42A 06103 Tension Plug, M42 x 1.5 3 42B 07354 O-Ring 3 43 06138 Valve Casing 1 44 07280 Valve Seat 6 44A 07281 O-Ring 6 45 07282 Valve Plate 6 46 07283 Valve Spring 6 47 07284 Spring Retainer, Discharge 3 ...

  • Giant MP4130HT(C) - page 6

    6 1. With a 27mm wrench, remove the three discharge plugs (#48) and three inlet plugs (#42A) from the manifold (#43). 2. Inspect the plug o-rings (#48A and #42B) and replace as necessary. 3. Using a valve puller (avail- able from Snap-On-Tools), remove the valve assembly (#44 - #47). REPAIR INSTRUCTION - MP4130HT(C) Disassembly sequence of the GIAN ...

  • Giant MP4130HT(C) - page 7

    7 8. From the back of the manifold (#43), remove the packing assembly (#'s 42, 41, 40, and 39) by tapping assembly out from the back to the front. 9. Turn the manifold (#43) over and remove the rear v-sleeve snap ring (#36). Remove rear pressure ring (#39) , rear v-sleeve (#40) and rear support ring (#41). These parts should slide out with lit ...

  • Giant MP4130HT(C) - page 8

    8 Gear End Disassembly Note: Make certain that the plungers (29B) have been removed before starting the following sequence. 12. Make sure the oil is drained from the pump before removing the crankcase cover (#4). Remove all screws (#10). Inspect the crankcase cover o-ring (#5) for damage and replace it as necessary. 13. Remove the connecting rod sc ...

  • Giant MP4130HT(C) - page 9

    9 29. Replace any shims (#20A) and position the bearing cover (#14) as before. Tighten the bearing cover bolts (#17) evenly to position the bearing race. Torque the bolts to 125 inch-pounds. Once the crankshaft reassembly is complete, oil the crankshaft races freely before replacing the connecting rod (#24) end caps. 30. Reassemble the connecting r ...

  • Giant MP4130HT(C) - page 10

    10 38. Reassemble the inlet valve assembly in the reverse or- der of step #7. Make cer- tain all the components are press fit together and that the spring retainer (#54) is slightly counter sunk in the valve housing (#52). Grease the o-ring (#53) and install it on to the valve housing. Re- install the entire inlet valve assembly into the manifold ( ...

  • Giant MP4130HT(C) - page 11

    11 PUMP SYSTEM MALFUNCTION MALFUNCTION The Pressure and/or the Delivery Drops Water in crankcase Noisy Operation Rough/Pulsating Operation with Pressure Drop Pressure Drop at Gun Excessive Leakage High Crankcase Temperature CAUSE Worn packing seals Broken valve spring Belt slippage Worn or Damaged nozzle Fouled discharge valve Fouled inlet strainer ...

  • Giant MP4130HT(C) - page 12

    MP4130HT(C) DIMENSIONS (mm) GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace t ...

Manufacturer Giant Category Septic System

Documents that we receive from a manufacturer of a Giant MP4130HT(C) can be divided into several groups. They are, among others:
- Giant technical drawings
- MP4130HT(C) manuals
- Giant product data sheets
- information booklets
- or energy labels Giant MP4130HT(C)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Giant MP4130HT(C).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Giant MP4130HT(C), service manual, brief instructions and user manuals Giant MP4130HT(C). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Giant MP4130HT(C).

Similar manuals

A complete manual for the device Giant MP4130HT(C), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Giant MP4130HT(C) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Giant MP4130HT(C).

A complete Giant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Giant MP4130HT(C) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Giant MP4130HT(C), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Giant MP4130HT(C), that we can find in the current document
3. Tips how to use the basic functions of the device Giant MP4130HT(C) - which should help us in our first steps of using Giant MP4130HT(C)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Giant MP4130HT(C)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Giant MP4130HT(C) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Giant MP4130HT(C)?

Use the form below

If you did not solve your problem by using a manual Giant MP4130HT(C), ask a question using the form below. If a user had a similar problem with Giant MP4130HT(C) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)