English dropdown-ico

Manual D-Link GO-RT-N300/E

83 pages Not applicable
Download

Go to site of 83

Summary
  • D-Link GO-RT-N300/E - page 1

    V ersion 1.0 | 07/02/2013 GO-RT-N300 U ser Manual W ir eless N 300 Easy Router ...

  • D-Link GO-RT-N300/E - page 2

    i D-Link GO -RT -N300 User Manual D-Link reser ves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such r evisions or changes. Manual Revisions T rademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corpora tion or its subsidi ...

  • D-Link GO-RT-N300/E - page 3

    ii D-Link GO -RT -N300 User Manual T able of Con tents Prefac e ................................................................................. i Manual Revisions ........................................................................... i T rademarks ...................................................................................... i Produc ...

  • D-Link GO-RT-N300/E - page 4

    iii D-Link GO -RT -N300 User Manual T able of Con tents Statistics ................................................................................. 50 Help .................................................................................................51 W ireless Security ............................................................. 52 What is W ...

  • D-Link GO-RT-N300/E - page 5

    1 D-Link GO -RT -N300 User Manual Section 1 - Product Over view P r oduc t O v er view Note: Using a power supply with a different voltage rating than the one included with the GO-RT -N300 will cause damage and void the warr anty for this product. P ack age C ont ents GO-RT -N300 W ireless N 300 Easy Router P ower A dapter Ethernet Cable ...

  • D-Link GO-RT-N300/E - page 6

    2 D-Link GO -RT -N300 User Manual Section 1 - Product Over view Network Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n or 802.11g wireless clients • 10/100 Ethernet W eb -based Congura tion Utility Requirements Comput er with the following: • Windo ws ® , Macintosh, or Linux-based operating sy stem • An installed E ...

  • D-Link GO-RT-N300/E - page 7

    3 D-Link GO -RT -N300 User Manual Section 1 - Product Over view F ea tures • F ast er Wi re less Netw orking - The GO-RT -N3 00 p ro vid es wire less c onne ction of u p t o 3 00Mb ps* fo r ot her 802. 11n wireless clients. This capability allows users to par ticipate in real-time ac tivities online, such as video streaming , online gaming, and r ...

  • D-Link GO-RT-N300/E - page 8

    4 D-Link GO -RT -N300 User Manual Section 1 - Product Over view Pr essing the Reset Button restor es the router t o its original factor y default settings. The Internet por t is the connection for the Ethernet cable to the Cable or DSL modem. The On/Off button turns the device on or off . LAN P or ts Connect Ethernet devices such as computers , swi ...

  • D-Link GO-RT-N300/E - page 9

    5 D-Link GO -RT -N300 User Manual Section 1 - Product Over view INTERNET A solid light indicates c onnec tion on the W AN por t. P ow er LED A solid light indicates a pr oper connection to the power supply . Har dwar e O v er view LEDs ...

  • D-Link GO-RT-N300/E - page 10

    6 D-Link GO -RT -N300 User Manual Section 2 - I nstallation Befor e Y ou B egin Installation This section will walk you thr ough the installation pr ocess. Placement of the router is very impor tant. Do not plac e the rout er in an enclosed area such as a closet, cabinet, or in the a ttic or garage. • Please configur e the router with the comput ...

  • D-Link GO-RT-N300/E - page 11

    7 D-Link GO -RT -N300 User Manual Section 2 - I nstallation W ireless Installation C onsider ations The D -Link wirel ess router lets you access your net work using a wireless conne cti on from vir tu ally any where withi n the operating range of your wireless network. Keep in mind, howev er , that the number , thick ness and location of walls, cei ...

  • D-Link GO-RT-N300/E - page 12

    8 D-Link GO -RT -N300 User Manual Section 2 - I nstallation If you are connecting the rout er to a cable/DSL/satellite modem, please f ollow the steps belo w : 1. Place the r outer in an open and central loca tion. Do not plug the power adapter int o the router . 2. Unplug the modem ’ s pow er adapter . Shut down y our computer . 3. Unplug the Et ...

  • D-Link GO-RT-N300/E - page 13

    9 D-Link GO -RT -N300 User Manual Section 2 - I nstallation If you are connec ting the D -Link router to another rout er to use as a wireless access point and/or switch, you will hav e to do the follo wing before c onnec ting the rout er to your network: • Disable UPnP ™ • Disable DHCP • Change the LAN IP address to an available address on ...

  • D-Link GO-RT-N300/E - page 14

    10 D-Link GO -RT -N300 User Manual Section 2 - I nstallation 6. Disconnect the Ethernet cable from the rout er and reconnect your computer t o your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and c onnec t it to y our other router . D o not plug an ything into the Internet ( W AN) port of the D -Link router . 8. Y ou ...

  • D-Link GO-RT-N300/E - page 15

    11 D-Link GO -RT -N300 User Manual Section 2 - I nstallation The GO-R T -N300 will run a Setup W izard when you first use it. F ollow the simple steps belo w t o run the Setup Wizard to guide you quickly through the installation proc ess. Se le c t yo ur W AN n et wor k ty pe, th en en ter yo ur wi rele ss S SID a nd ke y . Cl ick t he S ave a nd C ...

  • D-Link GO-RT-N300/E - page 16

    12 D-Link GO -RT -N300 User Manual Section 3 - Conguration C ongura tion This section will show you ho w to configure y our new D -Link wireless r outer using the web-based configuration utility . W eb -based C onfigura tion Utility T o access the configuration utilit y , open a web-browser such as I n te r ne t Ex pl o rer a n d e n te r t h ...

  • D-Link GO-RT-N300/E - page 17

    13 D-Link GO -RT -N300 User Manual Section 3 - Conguration W izard Y ou can c onf igur e y our W A N ne twor k c onne ction usi ng a wiz ar d or manua lly . Click Next to use the Setup W izard , or c lick Manual to con fig ure the W AN con nec ti on m anua lly , w hic h w ill t ake you to the Setup > Internet Setup page. Setup Wizar d will be ...

  • D-Link GO-RT-N300/E - page 18

    14 D-Link GO -RT -N300 User Manual Section 3 - Conguration Se le c t t he co nne c ti on t yp e for yo ur W AN an d c li ck N ex t t o continue . If you s ele cte d PPP oE, en t er yo ur PPP oE use rna me and p ass wo rd twice and click Nex t to continue. Click the Ac count V alidate button to valida te the account . ...

  • D-Link GO-RT-N300/E - page 19

    15 D-Link GO -RT -N300 User Manual Section 3 - Conguration Y o u c a n a ls o c o n f i g u re t h e w i re l es s n e t wo r k a n d s e c u r i t y settings. If you pr efer not to , click Disable the wireless radio . Click Next to continue . If you se lected Static IP , enter your IP address, Subn et M ask, Default Gateway , Primar y DNS, and ...

  • D-Link GO-RT-N300/E - page 20

    16 D-Link GO -RT -N300 User Manual Section 3 - Conguration Click Finish to complete the setup process. When the router has finished sa ving, the Status > Device Inf o window will o pen. ...

  • D-Link GO-RT-N300/E - page 21

    17 D-Link GO -RT -N300 User Manual Section 3 - Conguration This section will allow you to change the local netw ork settings of the router and to configur e the DHCP settings. L ocal Net w ork Use this section to configur e the Router’ s local net work settings. Use this se ctio n to con figure the GO -R T -N30 0’ s bui lt-in DHCP ser ver se ...

  • D-Link GO-RT-N300/E - page 22

    18 D-Link GO -RT -N300 User Manual Section 3 - Conguration L ocal Net w ork Enter the IP address of the router . The default IP address is 192.168.0.1. If you change the IP address, once you click Apply , you will need to enter the new IP address in your browser to get back into the configur ation utility . E n t e r t h e S u b n e t M a s k . ...

  • D-Link GO-RT-N300/E - page 23

    19 D-Link GO -RT -N300 User Manual Section 3 - Conguration DHCP stan ds f or D ynam ic Ho st C ont rol P rot ocol . Th e GO-RT -N3 00 h as a built- in DH CP s er ve r . The DHCP Se r ver will aut omat icall y assign an IP addr ess to the computers on the LAN/priva te network. B e sure t o set your comput ers to be DHCP clients by setting their T ...

  • D-Link GO-RT-N300/E - page 24

    20 D-Link GO -RT -N300 User Manual Section 3 - Conguration If you want a computer or device to alwa ys ha ve the same IP address assig ned, y ou can create a DHCP reser vation. The router will assign the IP address only t o that computer or device . Note: This IP address m ust be within the DHCP IP Address Range . E n t e r t h e I P a d d r e s ...

  • D-Link GO-RT-N300/E - page 25

    21 D-Link GO -RT -N300 User Manual Section 3 - Conguration Internet Setup Setup This section allows you t o manually configure y our Router ’ s Internet W AN settings. Select the W AN int er face type. If you choose DHCP Client, please configure the follo wing fields: Enter the host name of the rout er . Enter the MTU siz e. Click this if the ...

  • D-Link GO-RT-N300/E - page 26

    22 D-Link GO -RT -N300 User Manual Section 3 - Conguration Select Static IP from the drop-down menu. Enter the static IP address which was provided to you by your Internet Ser vice Pr ovider (ISP). Enter the subnet pro vided by your ISP . Enter the default gatew ay provided b y your ISP . Enter the Maximum T ransmission Unit size. The default v ...

  • D-Link GO-RT-N300/E - page 27

    23 D-Link GO -RT -N300 User Manual Section 3 - Conguration When you ha ve finished configuring the W AN settings, click the Apply C hanges button. If you choose PPP oE, please configure the f ollowing fields: When you ha ve finished configuring the W AN settings, click the Apply C hanges button. Select PPPoE from the dr op -down menu. Enter the ...

  • D-Link GO-RT-N300/E - page 28

    24 D-Link GO -RT -N300 User Manual Section 3 - Conguration W ireless Basics W ireless Enable SSID broadcast if you want the router to transmit its SSID publicly so other wireless devices can disc over it. Enable wireless isolation to prevent connected wireless devices from connec ting to other wireless devices that are also connected to the r ou ...

  • D-Link GO-RT-N300/E - page 29

    25 D-Link GO -RT -N300 User Manual Section 3 - Conguration W ireless Securit y Wir eless secur ity helps to preven t unauthorized users from accessing your wireless network , or seeing data being passed between the router and wireless clients. The GO-RT -N300 suppor ts two popular wireless securit y protocols , y ou should select a protoc ol bas ...

  • D-Link GO-RT-N300/E - page 30

    26 D-Link GO -RT -N300 User Manual Section 3 - Conguration Wi-F i P rot ec ted Ac cess ( WP A/WP A2) - This is a newer and mor e secur e pr otocol for wir eless securit y . It uses a cipher combined with a pre -shared key (passwor d) to encr ypt data being sent ov er the wireless network. I t is recommended that you use this security method if i ...

  • D-Link GO-RT-N300/E - page 31

    27 D-Link GO -RT -N300 User Manual Section 3 - Conguration W i-F i P rotected ( WPS) S etup Wi-F i Pr otected Setup ( WPS) System is a simplified method for securing y our wireless net work during the “Initial setup ” as well as the “ Add New Device ” proc esses. The Wi-F i Allianc e ( WF A ) has c er tified it across diff erent produc t ...

  • D-Link GO-RT-N300/E - page 32

    28 D-Link GO -RT -N300 User Manual Section 3 - Conguration Enable wireless on your netw ork . The fragmentation threshold, which is specified in bytes, determines whether packets will be frag mented. P ackets ex ce edin g the 234 6 by te s etti ng w ill b e fr agm ent ed b efo re transmission. 2346 is the default setting. This value shoul d rema ...

  • D-Link GO-RT-N300/E - page 33

    29 D-Link GO -RT -N300 User Manual Section 3 - Conguration WPS Setup PIN of the Router: Enable WPS: Disable PIN: Keep C urrent Configur ation: A CL Setup: Displays the curren t PIN for the rout er ’ s WPS connec tion. Wir eless clients connecting to the router using the PIN method should enter this PIN in order t o connect. Check the box to en ...

  • D-Link GO-RT-N300/E - page 34

    30 D-Link GO -RT -N300 User Manual Section 3 - Conguration Ac cess Contr ol List Click the A CL Setup button to edit the ACL ( Access C ontrol List). This takes you to the scr een below . Click to enable Wireless A ccess Contr ol Mode. In this mode, only listed wir eless devices will be allowed t o connect to the wireless network. Click the Appl ...

  • D-Link GO-RT-N300/E - page 35

    31 D-Link GO -RT -N300 User Manual Section 3 - Conguration Enable wireless on your netw ork . Click the Site Survey button to enable the r outer to search f or nearby wireless networks. This will take about 30 seconds. Repeater Enabled: SSID of AP: W ireless Repeat er A list of wireless networks that have been found will then appear . Selec t a ...

  • D-Link GO-RT-N300/E - page 36

    32 D-Link GO -RT -N300 User Manual Section 3 - Conguration Aut hentica tion T ype: Encr yption Strength: Security Encr yption ( WEP) Key: Pr e -shared Key: IP Addr ess: Subnet Mask: Y ou can then set up wir eless security for the network. If you select WEP as the securit y option, the follo wing settings below will appear . Select the authentica ...

  • D-Link GO-RT-N300/E - page 37

    33 D-Link GO -RT -N300 User Manual Section 3 - Conguration This page allows y ou to set up an Ac cess Con trol List t o restrict the types of data packets that can en ter the network fr om the Internet. A cc ess C ontr ol List A dvanc ed Us e t he d ro p - d ow n m en u to s e l ec t e i t he r W A N o r I P address . Th is o ptio n wi ll o nly ...

  • D-Link GO-RT-N300/E - page 38

    34 D-Link GO -RT -N300 User Manual Section 3 - Conguration This page allows you to enable por t triggering to specify inbound traffic to be sent to specific por ts while other por ts are in use for outbound tr affic. P or t T riggering Enable or disable the Nat P or t T rigger . NA T Port T rigger: Click the Apply Changes button t o save an y ch ...

  • D-Link GO-RT-N300/E - page 39

    35 D-Link GO -RT -N300 User Manual Section 3 - Conguration DMZ Sometimes you may want a computer exposed to the outside world f or c er tain types of applications. If you choose to expose a computer , you can enable the Demilitarized Zone (DMZ). This option will expose the chosen computer complet ely to the outside world. Check the box to enable ...

  • D-Link GO-RT-N300/E - page 40

    36 D-Link GO -RT -N300 User Manual Section 3 - Conguration This page allow s you to block specific w ebsites or keywords in order t o preven t network clients from accessing them. URL Block Enable or disable URL Blocking. URL Blocking Capability: Click the Apply Changes button t o save an y changes made. T ype a key word or a URL sit e that you ...

  • D-Link GO-RT-N300/E - page 41

    37 D-Link GO -RT -N300 User Manual Section 3 - Conguration Check the box to enable DDNS. Choose your DDNS provider from the dropdo wn menu. Enter the Ho st Name that you registered wit h your DDNS service provider . Enter the Username f or your DDNS account . Enter the P asswor d for your DDNS ac count. Enable: DDNS Pr ovider: Host Name: Usernam ...

  • D-Link GO-RT-N300/E - page 42

    38 D-Link GO -RT -N300 User Manual Section 3 - Conguration Enter the total bandwidth. Click to enable auto traffic shaping . Select the data protocol which you w ant to set a QoS rule for . Enter the sourc e IP . Enter the destination IP . Enter the sourc e por t number if applicable. This box will be gr eyed out f or cer tain protoc ols. Enter ...

  • D-Link GO-RT-N300/E - page 43

    39 D-Link GO -RT -N300 User Manual Section 3 - Conguration Down F loor: Source Netmask: Dest Netmask: Dest P or t: Up Ceiling: Down C eiling: Enter the minimum download speed . Enter the sourc e netmask. Enter the destination netmask. Enter the destination port. Enter the maximum upload speed. Enter maximum download speed . Click the Add button ...

  • D-Link GO-RT-N300/E - page 44

    40 D-Link GO -RT -N300 User Manual Section 3 - Conguration C l i c k E n a b l e t o u s e t h e U Pn P f e at u r e . U P N P p r o v i d e s c o m p a t i b i l i t y w i t h n e t w o r k i n g equipment, software and peripherals. UPnP : UP nP This page allow s you to enable the Univ ersal Plug and Play (UP nP) featur e. Click the Apply Chang ...

  • D-Link GO-RT-N300/E - page 45

    41 D-Link GO -RT -N300 User Manual Section 3 - Conguration The GO-R T -N300 can be configured as a virtual ser ver so that remote users accessing W eb or FTP ser vices via the public IP address can be automa tically redirected to local servers in the LAN (Local Ar ea Network). The GO -RT -N300 firewall feature filters out unrecogniz ed packets t ...

  • D-Link GO-RT-N300/E - page 46

    42 D-Link GO -RT -N300 User Manual Section 3 - Conguration The Virtual S er ver page allo ws you to open a single port. If you would like to open a range of ports, ref er to the next page. Select an application from the drop- down menu or type a name in the next field. Enter a service name. Select TCP or UDP from the P rotoc ol drop- down menu. ...

  • D-Link GO-RT-N300/E - page 47

    43 D-Link GO -RT -N300 User Manual Section 3 - Conguration This page allow s you to r eboot your system with the curr ent setting or reset it to the factor y default setting . Reboot Maintenanc e Click the Reboot button to r eboot the system. T o reset the syst em to the factor y default setting, click the Reset button. GO- RT -N300 ...

  • D-Link GO-RT-N300/E - page 48

    44 D-Link GO -RT -N300 User Manual Section 3 - Conguration F irmw are Upg rade This page allows you to upgrade the fir m ware of the Router . I f you plan to install new firmwar e, make sure the firmware you want to use is on the local har d drive of the computer . Please check the D -Link suppor t site for firm ware updat es at http:// suppor t ...

  • D-Link GO-RT-N300/E - page 49

    45 D-Link GO -RT -N300 User Manual Section 3 - Conguration Backup/Restore This page allows you to sav e the router’ s current configura tion file onto your computer’ s hard drive or load a saved file from your har d drive. Click the Save butt on to download the curren t configuration settings as a file onto y our hard drive . T o load a pr e ...

  • D-Link GO-RT-N300/E - page 50

    46 D-Link GO -RT -N300 User Manual Section 3 - Conguration A dmin Enter a username. The user has Root privilege. Enter the current passw ord of the accoun t. Enter the new passwor d for the acc ount. Retype the new password. User Name: Privilege: Old P assword: New P assword: Confirm P asswor d: This page allow s you to add a user acc ount to th ...

  • D-Link GO-RT-N300/E - page 51

    47 D-Link GO -RT -N300 User Manual Section 3 - Conguration T ime and Dat e Enter the corr ec t year , month, day , and time. Enter the corr ec t year , month, day , and time. Select the daylight saving offset from the drop- down menu to have the rout er adjust the time to reflect the star ting or finishing of daylight saving in your region. This ...

  • D-Link GO-RT-N300/E - page 52

    48 D-Link GO -RT -N300 User Manual Section 3 - Conguration Displays the r outer ’ s time and firmware v ersion. Displays the M AC address and the priva te (local) IP settings for the r outer . Displays the wir eless MAC addr ess and your wireless settings such as SSID and Channel. Displays the M AC address and the public IP settings f or the r ...

  • D-Link GO-RT-N300/E - page 53

    49 D-Link GO -RT -N300 User Manual Section 3 - Conguration A c tive C lient T able This table display s all ac tive wir ed clients. This table display s all ac tive wir eless clients. Active Wired C lient T able: Active Wireless Client T able: This page display s lists of all wired and wireless clients. The IP address and MAC address of each cli ...

  • D-Link GO-RT-N300/E - page 54

    50 D-Link GO -RT -N300 User Manual Section 3 - Conguration Statistics This page display s the statistics f or packets that have been transmitt ed and receiv ed on the network on the router ’ s W AN and LAN por ts, and wir eless bands. Click the Refresh button t o refresh the r outer ’ s traffic statistics . GO- RT -N300 ...

  • D-Link GO-RT-N300/E - page 55

    51 D-Link GO -RT -N300 User Manual Section 3 - Conguration Help This section pro vides an explanation of each configuration or setting for the GO -RT -N300. Click on the links to be taken to the help text for that particular sec tion of router’ s setup. ...

  • D-Link GO-RT-N300/E - page 56

    52 D-Link GO -RT -N300 User Manual Section 4 - S ecurity W ireless Securit y This section will show you the diff erent lev els of securit y you can use t o protect your data fr om intruders. The GO-R T -N300 offers the following types of security : • WP A2 ( Wi-F i Pr otected Acc ess 2) • WP A2-PSK (Pre-Shared Key) • WP A ( Wi-F i Pr otected ...

  • D-Link GO-RT-N300/E - page 57

    53 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network It is recommended to enable wireless security ( WP A/WP A2) on your wireless router or access point befor e configuring your wireless adapter . I f you are joining an e xisting network , you will need to know the security key ( Wi-F i password) being used. T o join an ...

  • D-Link GO-RT-N300/E - page 58

    54 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network Y ou will then be prompted to enter the net work security key ( W i-F i password) for the wireless network. Enter the passwor d into the bo x and click Next . If you wish to use Wi-F i P rotected S etup ( WPS) to connect to the router , you can also press the WPS butto ...

  • D-Link GO-RT-N300/E - page 59

    55 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network U sing W indow s® 7 It is recommended to enable wireless security ( WP A/WP A2) on your wireless router or access point befor e configuring your wireless adapter . I f you are joining an e xisting network , you will need to know the security key or passphrase being us ...

  • D-Link GO-RT-N300/E - page 60

    56 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 3. Highlight the wireless network (SSID) you would like t o c onnect to and click the C onnec t button. If y ou get a good signal but cannot access the Internet, check y our T CP/IP settings for your wireless adapter . Refer to the Networking Basics section in this man ...

  • D-Link GO-RT-N300/E - page 61

    57 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 5. Enter the same security key or passphrase that is on your router and cl ick Conne c t . Y ou c an als o conn ec t by p ushi ng the WPS button on the rout er . It ma y take 20-30 seconds to connect to the wireless net work. If the connection fails, please verify that ...

  • D-Link GO-RT-N300/E - page 62

    58 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network C onfigure WPS The WPS feat ure of the route r can be configur ed using Windo ws ® 7. Carry out the follo wing steps to use W indow s ® 7 to config ure the WPS feature of the r outer: 1. Click the Star t button and select Comput er from the Star t menu. 2. Click the ...

  • D-Link GO-RT-N300/E - page 63

    59 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 3. Double - click the GO-R T -N300. 4. Input the WPS PIN number (on the Router label) or in the Setup > W ireless Setup menu in the Router ’ s W eb UI and click Next . ...

  • D-Link GO-RT-N300/E - page 64

    60 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 5. T ype a name to identify the network. 6. T o configure advanced settings , click the icon. Click Next to con tinue. ...

  • D-Link GO-RT-N300/E - page 65

    61 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 7. T h e f o l l o w i n g w i n d o w a p p e a r s w h i l e t h e R o u t e r i s b e i n g configured . W ait for the configuration to c omplete. 8. The f ollowing windo w informs you that WPS on the GO-RT -N300 has been setup successfully . Make a note of the secu ...

  • D-Link GO-RT-N300/E - page 66

    62 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network U sing W indow s V ista ® Windo ws Vista ® users may use the built-in wireless utility . I f y ou are using another compan y ’ s utility or Windows ® 2000, please ref er t o the user manual of your wireless adapter for help with connec ting t o a wireless network. ...

  • D-Link GO-RT-N300/E - page 67

    63 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network C onfigure W ireless Security It is recommended to enable wireless security ( WP A/WP A2) on your wireless router or access point befor e configuring your wireless adapter . I f you are joining an e xisting network , you will need to know the security key or passphrase ...

  • D-Link GO-RT-N300/E - page 68

    64 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 3. Enter the same security key or passphrase that is on your router and click Connect . I t may t ak e 20- 30 s eco nd s t o c on ne c t to t he w ire le ss n et wo rk . I f t he connection fails, please verify that the security settings are corr ec t. The key or passp ...

  • D-Link GO-RT-N300/E - page 69

    65 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network U sing W indow s ® XP Windo ws ® XP users may use the built-in wireless utilit y (Zer o Configura tion Utility). The following instruc tions are for Ser vice P ack 2 users. I f you are using another compan y ’ s utilit y or Window s ® 2000, please ref er to the us ...

  • D-Link GO-RT-N300/E - page 70

    66 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network C onfigure WP A-PSK It is recommended to enable WP A on your wir eless router or acc ess point befor e configuring your wir eless adapter . I f you ar e joining an existing network, you will need to know the WP A key being used. 2. H i g h l i g h t t h e wi r e l e s ...

  • D-Link GO-RT-N300/E - page 71

    67 D-Link GO -RT -N300 User Manual Section 5 - Connec ting to a Wireless Network 3. The Wire less Network Connection box will appear . Enter the WP A-PSK passphrase and click C onnec t . I t may t ak e 20- 30 s eco nd s t o c on ne c t to t he w ire le ss n et wo rk . I f t he connection fails, please verify that the WP A-PSK settings are correct. ...

  • D-Link GO-RT-N300/E - page 72

    68 D-Link GO -RT -N300 User Manual Section 6 - T roubleshooting T roubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the GO-R T -N300. Read the follo wing descriptions if you are having pr oblems. The examples below ar e illustrated in Window s ® XP . I f you hav e a differen t operat ...

  • D-Link GO-RT-N300/E - page 73

    69 D-Link GO -RT -N300 User Manual Section 6 - T roubleshooting • Configur e your Internet settings: • Go to Star t > Settings > Contr ol Panel . Double - click the Internet Options Icon. Fr om the Security tab , click the button to r estore the settings to their defaults . • Click the Connection tab and set the dial-up option to Never ...

  • D-Link GO-RT-N300/E - page 74

    70 D-Link GO -RT -N300 User Manual Section 6 - T roubleshooting 3. Why can ’t I connect to certain sites or send and receiv e emails when connecting through m y router? If y ou are having a pr oblem sending or receiving email, or c onnec ting to secure sites such as eBay , banking sites, and Hotmail , we suggest low ering the MTU in incremen ts o ...

  • D-Link GO-RT-N300/E - page 75

    71 D-Link GO -RT -N300 User Manual Section 6 - T roubleshooting Y ou should star t at 1472 and work your way down by 10 each time. Once you get a reply , go up by 2 until you get a fragment ed packe t. T ake that value and add 28 to the value to acc ount for the various T CP/I P headers . F or examp le, lets say that 1452 was the proper value, the ...

  • D-Link GO-RT-N300/E - page 76

    72 D-Link GO -RT -N300 User Manual Appendix A - Wireless Basics D -L i nk wi re le ss pr od uc t s a re ba se d o n i n du st r y s ta nd ard s to p rov id e e a sy- to - u se an d com pa ti bl e hig h -s pe ed w ire le ss connectivity within y our home , business or public access wireless networks. Stric tly adhering to the IEEE standard , the D-L ...

  • D-Link GO-RT-N300/E - page 77

    73 D-Link GO -RT -N300 User Manual Appendix A - Wireless Basics What is Wir eless? Wir eless or Wi-F i technology is another way of connecting your computer to the network without using wires. Wi-F i uses radio frequency to connect wirelessly , so you hav e the freedom to connect computers an ywhere in your home or office network. Wh y D-Link W ire ...

  • D-Link GO-RT-N300/E - page 78

    74 D-Link GO -RT -N300 User Manual Appendix A - Wireless Basics Compar ed to WLAN the speed and wireless operation range ar e both less than WLAN, but in return it doesn ’t use near ly as much pow er which makes it ideal for personal devices , such as mobile phones, PDAs , headphones, laptops , speakers, and other devices that opera te on batteri ...

  • D-Link GO-RT-N300/E - page 79

    75 D-Link GO -RT -N300 User Manual Appendix A - Wireless Basics Wher e is wireless used? Wir eless technology is expanding ever ywhere not just at home or office . People like the freedom of mobilit y and it ’ s becoming so popular that more and more public facilities now provide wireless acce ss to attract people . The wireless connection in pub ...

  • D-Link GO-RT-N300/E - page 80

    76 D-Link GO -RT -N300 User Manual Appendix A - Wireless Basics There ar e basically two modes of network ing: • I nfrastructure – All wir eless clients will connect to an access point or wir eless router . • Ad-Hoc – Dir ec tly connecting to another computer , for peer-to-peer communication, using wireless network adapters on each comput e ...

  • D-Link GO-RT-N300/E - page 81

    77 D-Link GO -RT -N300 User Manual Appendix B - Networking Basics Networking B asics Check y our IP address After you install your new D -Link adapter , by default, the T CP/IP settings should be set to obtain an IP address from a DHCP ser ver (i.e . wireless rout er) automatically . T o verify your IP address , please follow the st eps below . Cli ...

  • D-Link GO-RT-N300/E - page 82

    78 D-Link GO -RT -N300 User Manual Appendix B - Networking Basics Statically A ssign an IP address If you are not using a DHCP capable gat eway/rout er , or you need to assig n a static IP address, please f ollow the steps belo w : Step 1 W indow s ® 7 - Click on Start > Contr ol Panel > Network and Internet > Network and Sharing Cent er ...

  • D-Link GO-RT-N300/E - page 83

    79 D-Link GO -RT -N300 User Manual Appendix C - T echnical Specications T echnical Specica tions Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u Security • WEP TM • WP A TM - P ersonal/Enterprise • WP A2 TM - P ersonal/Enterprise W ireless Signal Rates 1 IEEE 802.11n: 20MHz Channel: • 150 Mbps (max) 40MHz Ch ...

Manufacturer D-Link Category Router

Documents that we receive from a manufacturer of a D-Link GO-RT-N300/E can be divided into several groups. They are, among others:
- D-Link technical drawings
- GO-RT-N300/E manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link GO-RT-N300/E
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link GO-RT-N300/E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link GO-RT-N300/E, service manual, brief instructions and user manuals D-Link GO-RT-N300/E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link GO-RT-N300/E.

Similar manuals

A complete manual for the device D-Link GO-RT-N300/E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link GO-RT-N300/E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link GO-RT-N300/E.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link GO-RT-N300/E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link GO-RT-N300/E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link GO-RT-N300/E, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link GO-RT-N300/E - which should help us in our first steps of using D-Link GO-RT-N300/E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link GO-RT-N300/E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link GO-RT-N300/E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link GO-RT-N300/E?

Use the form below

If you did not solve your problem by using a manual D-Link GO-RT-N300/E, ask a question using the form below. If a user had a similar problem with D-Link GO-RT-N300/E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)