-
Panasonic PT-AX200E - page 1
E NGLISH Operating Instructions LCD Projector Model No. PT-AX200E Before operating this product, please read the instr uct ions carefully and sa ve th is manual for future use. TQBJ0236 http://www.pureglare.com.au ...
-
Panasonic PT-AX200E - page 2
Important Information 2 - E NGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all th e nec essary operating inform ation that you might requ ire. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your pr oduct ...
-
Panasonic PT-AX200E - page 3
Important Information Important Safety Notice E NGLISH - 3 IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ TH E FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, plea se ensure that ...
-
Panasonic PT-AX200E - page 4
4 - E NGLISH Contents J Quick steps Important Information Important Safety Notice . ............. ............. ............. 2 Precautions with regard to safety ................... .... 6 WARNINGS ............ ........... ........... .............. ........... ...... 6 CAUTIONS ............... .............. ............... .............. ........ ...
-
Panasonic PT-AX200E - page 5
Preparation Getting Started Basic Operation Settings Maintenance Appendix E NGLISH - 5 Contents Important Infomation Settings Menu Navigation ......................... ................... ......27 Navigating through the MENU .... ................. ............. 27 Main menu and sub-menu ....... ........... .............. ........ 28 PICTURE menu .. ...
-
Panasonic PT-AX200E - page 6
Important Information 6 - E NGLISH Precautions with regard to safety If you notice smoke, stra nge smells or noise comin g from the projector, disconnect t he mains plug from the mains socket. Do not continue to use the projector in such cases, otherwise fire or electric shocks could res ult. Check that no more smoke is coming out, and then contact ...
-
Panasonic PT-AX200E - page 7
Precautions with regard to safety E NGLISH - 7 Important Information Do not use the projector in a bath or s hower. Fire or electric shocks can re sult. Do not place your skin into the light beam wh ile the projector is being used. S trong light is emitted from the projector’s lens. If you place directly into this lig ht, it can hurt or damage yo ...
-
Panasonic PT-AX200E - page 8
Precautions with regard to safety 8 - E NGLISH Important Information Do not mix old and new batteries. If the batteries are ins erted incorrectly , they may explode or leak, and fire, injury or cont amination of the battery comp artment and surr ounding area may result. Remove the used batter ies from the remote control promptly. If you leave used ...
-
Panasonic PT-AX200E - page 9
Precautions with regard to safety E NGLISH - 9 Important Information Avoid setting u p in places which are subject to vibration or shocks. The internal p arts ca n be damaged, which may cause malfunctions or accident s. Avoid setting u p in places which are subject to sudden temperature c hanges, such as near an air conditioner or lighting equipmen ...
-
Panasonic PT-AX200E - page 10
Precautions with regard to safety 10 - E NGLISH Important Information Make sure the following accessories are provided with yo ur projector. * The protectors for en closed produc ts, such as a plug cove r or foam car tons must be treated pr operly. Accessories Remote control for PT- AX200E (x1) N2QA YB000194 AA batteries for remote control (x2) Saf ...
-
Panasonic PT-AX200E - page 11
E NGLISH - 11 Preparation About Your Projector Remote control NOTE: • Do not drop the remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the remote control. • Do not attempt to modify or disassemble the remote co ntrol. Contact an Authorised Service Centre for repairs. • Do not k ...
-
Panasonic PT-AX200E - page 12
Preparation About Your Projector 12 - E NGLISH J T op and front view Projector body NOTE: • Do not cover the ventilation openin gs or place anything within 50 cm (20") of them as this may cause damage or injury . • While the proj ector is not in use , keep the lens cove r to protect the le ns. POWER While the MAIN POWER is on, switch betwe ...
-
Panasonic PT-AX200E - page 13
Preparation About Your Projector E NGLISH - 13 J Back and bottom view NOTE: • Do not cover the venti lation openings or place anything within 10 cm (4") of them as this may cause damage or injury . • The projector should only be used with the attached mains l ead to ensure optimum performanc e and avoid damage to the projector . Front leg ...
-
Panasonic PT-AX200E - page 14
Getting Started 14 - E NGLISH Setting up You can adjust the projection size with 2.0x zoom lens . Calculate and de fine the throw distance as follows. * All measurements above are app roximate and may differ slightly from the actual measurements. J Calculation methods fo r screen dimensions Y ou can calculate more detailed screen dimension from the ...
-
Panasonic PT-AX200E - page 15
Getting Started Setting up E NGLISH - 15 You can use the proje ctor with any of the following 4 projecti on methods. To set the desired method i n the projector, See “INSTALLATION” on page 38. You can screw up/down the fron t leg adjusters to control the a ngle of the pro jector for adjusting the throwing a ngle. See “Positioning the imag e? ...
-
Panasonic PT-AX200E - page 16
Getting Started Setting up 16 - E NGLISH If the projector is not positio ned right in front of the cent r e of the screen, you can adju st the proje cted image position by moving t he lens shift dia ls within the shift range of the lens. J Adjusting the lens shif t lever 1. Screw the sh ift lever counterclockwise to unlock. 2. Move the shift lever ...
-
Panasonic PT-AX200E - page 17
Getting Started Setting up E NGLISH - 17 J Projector location range Y o u can determine wh ere to locate the screen and the projector by considering the lens shift possibilities. See “Positioning the image” on p age 21. Q When the screen position is fixed Q When the projector position is fixed NOTE: • When the projector is l ocated right in f ...
-
Panasonic PT-AX200E - page 18
Getting Started 18 - E NGLISH Connections Read and follow the operating and con necting instructions o f each periph eral device. The peripher al devices must be turned off. Use cables that match each peripheral de vice to be connected. Confirm the type of video signals. See “L ist of comp atible signals” on p age 45. Audio cables must be conne ...
-
Panasonic PT-AX200E - page 19
E NGLISH - 19 Basic Operation Switching the projector on/off J Connecting 1. Make sure the shape of the mains plug a nd the AC IN connector on the back of the projector match, then push the plug all the way in. 2. Connect the mains lead to a mains socket. J Disconnecting 1. Make sure the MAIN POWER is switched off and unplug the mains lead from the ...
-
Panasonic PT-AX200E - page 20
Basic Operation Switching the projector on/off 20 - E NGLISH 1. Switch the MAIN POW ER button on. The power indicator li ghts up in red. 2. Remove the lens cover from the lens. 3. Press the POWER button. The power indicator lights up in green after flashing for a while. The STARTUP LOGO is displayed on the screen. See “ST ARTUP LOGO” on page 38 ...
-
Panasonic PT-AX200E - page 21
E NGLISH - 21 Basic Operation Projecting an image 1. Switch on the connected devices. Press the play button of the required device. 2. Press the INPUT SELECT button to select the required input meth od if needed. See “Switching the input signal” on p age 26. The image will b e projected on the scree n. 1. Press the ASPECT button to select the r ...
-
Panasonic PT-AX200E - page 22
22 - E NGLISH Basic Operation Remote control operation You can operate the pr ojector with the remote co ntrol within the remote range 7 m (22'11"). Q Facing to the projector Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector an d press the r equired butt ons to operate. Q Faci ...
-
Panasonic PT-AX200E - page 23
Basic Operation Remote control operation E NGLISH - 23 You can display the PICTURE and ADVANCED MENU menu items by pressing the PIC. ADJUST button. Pr ess the butto n to switch be tween PICTURE and ADVANCED MENU menu. Press F G to select the required menu item and I H to adjust. Q PICTURE menu items PICTURE MODE , CONTRAST , BRIGHTNESS , COLOUR , T ...
-
Panasonic PT-AX200E - page 24
Basic Operation Remote control operation 24 - E NGLISH You can ad just a selecte d colour individu ally and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu. Q Adjusting the selected colour Select a colour and adjust COLOUR , TINT and BRIGHTNESS . 1. Select the CU RSOR menu and press ENTER . The p ...
-
Panasonic PT-AX200E - page 25
Basic Operation Remote control operation E NGLISH - 25 Q Saving a log sett ing as a profile Return to the COLOUR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched. 1. Select the PROFILE SAVE menu and press ENTER The PROFILE SAVE menu is displayed. Y ou can save the prof ile as USER1 , USER2 and US ...
-
Panasonic PT-AX200E - page 26
Basic Operation Remote control operation 26 - E NGLISH You can switch the inpu t method manually by pressing the INPUT SELECT button. Press the button several times or press I H to cycle through the input methods as follows. The actual proj ected image will be changed in a while. The graphical guidance will be displayed on the upper right of the pr ...
-
Panasonic PT-AX200E - page 27
E NGLISH - 27 Settings Menu Navigation The menu system allows you to acce ss functions which do not have their own dedicated buttons on the remote control. The menu options are str uctured and cate gorised. You can n avigate through the menu with F G H I buttons. J Displaying the main menu Press the MENU button to disp lay the main menu and the ope ...
-
Panasonic PT-AX200E - page 28
Settings Menu Navigation 28 - E NGLISH The main menu has 5 options. Sele ct the required menu item and press ENTER to display the sub-menu. Main menu and sub-menu NOTE: • Some default settings vary by th e selected input signal. • Sub-menu items vary according to the selected inp ut signal. • Some settings are adjustable without any signals. ...
-
Panasonic PT-AX200E - page 29
Menu Navigation E NGLISH - 29 Settings Main menu Sub-menu Options (Underlined is def ault setting) Page POSITION H-POSITION • Default: 0 page 34 V-POSITION • Default: 0 page 34 DOT CLOCK *1 *1. COMPONENT / COMPUTER signals only • Default: 0 page 34 CLOCK PHASE *2 *2. COMPONENT signals only • Default: 0 page 34 ASPECT 4:3 16:9 14:9 page 34 Z ...
-
Panasonic PT-AX200E - page 30
30 - E NGLISH Settings PICTURE menu Depending on the projection environment, you can use these pres et paramete r settings to optimise ima ge projection. Press I H to cycle through the op tions. Q Reproducing colour of an sRGB image For reproducing the orig inal colour of S-VIDEO images precisely , set as follows. 1. Press the PICTURE ADJUST button ...
-
Panasonic PT-AX200E - page 31
PICTURE menu E NGLISH - 31 Settings You can adjust the white balan ce of the projected image. Setting range: -6 to +6 You can switch automatic adjustment system of the la mp and the lens iris, which conrol the contra st and black level, on/off. ON : Automatic adjustment OFF : No adjustment The luminance sensor detects the br ightness of the room an ...
-
Panasonic PT-AX200E - page 32
Settings PICTURE menu 32 - E NGLISH J TV-SYSTEM When the video signal is changed, the settin g switches automatically . Y ou can switch the setting manually to match the video data . Press I H to cycle through the options. You can save and name the ad justed PICTURE menu settings for instan t access from FAVOURITE LOAD menu. 1. Adjust the items in ...
-
Panasonic PT-AX200E - page 33
PICTURE menu E NGLISH - 33 Settings You can edit the named memory settings. Q Deleting a memory setting 1. Select FAVOURITE DE LETE and press the ENTER button. 2. Select the required memory setting and pre ss the ENTER button. If you select ALL DELETE , you can delete all of the saved memory settings. 3. Select OK in the confirmation screen and pre ...
-
Panasonic PT-AX200E - page 34
34 - E NGLISH Settings POSITION menu You can move the projected imag e horizontally for fine adjustment. You can move the projected imag e vertically for fine adjustment. If you have in terference pa tterns of th e projected ima ge, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency. ...
-
Panasonic PT-AX200E - page 35
POSITION menu E NGLISH - 35 Settings J Aspect ratio options an d projection example If you apply the aspect ratio options to the projected image, the resu lt will be as follows. The result may differ due to the input signals. See “Switchin g the aspect ratio” on p age 23. Q VIDEO/S-VIDEO/COMPONENT Not available with 1 125 ( 1 080)/50i, 1 125 (1 ...
-
Panasonic PT-AX200E - page 36
Settings POSITION menu 36 - E NGLISH WSS (Wide Screen Signalling) detects if a PAL / 625p (576p)/625 i (576i) signal is input and that signal has an identification signal, and switch the aspe ct ratio to required settin g automatically. You can switch the system off manually. If the 4 edges of an image is partly dropped, you can use this function t ...
-
Panasonic PT-AX200E - page 37
E NGLISH - 37 Settings FUNCTION BUTTON You can assign a frequently used menu option to the FUNCTION button for shortcut. Press I H to select the required me nu option and pres s the ENTER button. Q BLANK function Y ou can stop the projection temporar y for electrical power save. T o escape from the blank mode, press any button exce pt the LIGHT but ...
-
Panasonic PT-AX200E - page 38
38 - E NGLISH Settings OPTION menu When you change the input method, th e guidance appears in the upper right co rner of the screen. The following display methods are availa ble. Press I H to cycle through the options. You can change the backgrou nd colour of the menu. Press I H to cycle through the option. TYPE1 Semi transparent black TYPE2 Solid ...
-
Panasonic PT-AX200E - page 39
OPTION menu E NGLISH - 39 Settings You can select the requir ed duration of time and se t the off timer to turn off the powe r of the projector automatically. 3 minutes befo re turn-off, the countdown of minutes will be displayed in the lower right corner. Press I H to cycle through the optio ns. If you use the projector at high elevation , the ALT ...
-
Panasonic PT-AX200E - page 40
40 - E NGLISH Maintenance TEMP and LAMP Indicators If a problem shou ld occur with the projector , the LAMP and/or TEMP indicators will inform you. Manage the indicated problems as follow. 1. Confirm the status of all in dicators and proje ctor , and switch of f the projector in prop er way . 2. Find out th e cause of th e problem by status of the ...
-
Panasonic PT-AX200E - page 41
E NGLISH - 41 Maintenance Care and Replacement J Before cleaning the proj ector Switch off the MAIN POWER switch in proper way and disconnect the mains plug fro m the mains socket. Unplug all the cables from the projector . J Cleaning the outer sur face of the projector Wipe off dirt and dust gently with a soft cloth. If it is difficult to remove t ...
-
Panasonic PT-AX200E - page 42
Maintenance Care and Replacement 42 - E NGLISH J Before replacing the lamp unit Switch off the MAIN POWER button in proper way and disconnect the mains plug from the mains socket. Make sure the lamp unit and the surroundings are cooled en ough. Unplug all th e cables from the projector. Prepare a Phillips-head screwdriver . Contact an Authorised Se ...
-
Panasonic PT-AX200E - page 43
Care and Replacement E NGLISH - 43 Maintenance J Removing and replacing the lamp unit 1. Turn the projector upside d own and place it gently on a sof t cloth. 2. Us e a Phillips screw driver to l oosen the 2 lamp unit fixing screws until the screws turn fr eely and remove the lamp u nit cover . 3. Us e a Phillips screw driver to l oosen the 2 lamp ...
-
Panasonic PT-AX200E - page 44
44 - E NGLISH Maintenance Troubleshooting Should any problem pers ist, contact y our dealer. Problem Cause Reference pa g e Power does not turn on. The mains lead may not be connected. The MAIN POWER switch is turned o ff. No electric supply is at the mains socket. TEMP indicator is lit or flashes. LAMP indicator is lit or flashes. The lamp unit co ...
-
Panasonic PT-AX200E - page 45
E NGLISH - 45 Appendix Technical Information List of comp atible signals Signal Display mode Display resolution (dot s) *1 *1. The “i” appearing after the re solution indicates an interlaced signal. Scanning frequency Dot c lock frequency (MHz) Picture quality *2 *2. The following symbols are used to i ndicate picture q uality. AA Maximum pictu ...
-
Panasonic PT-AX200E - page 46
Appendix Technical Information 46 - E NGLISH The serial connector which is on the connector pa nel of the projector conforms to the RS-232C inter face specification, so that the projector ca n be controlled by a persona l computer which is connected to th is connecter. J Connection J Pin assignment s and signal names J Cable specifications (When co ...
-
Panasonic PT-AX200E - page 47
Technical Information E NGLISH - 47 Appendix J Communication settings J Control commands J Inquiry commands Signal level RS-232C Character leng th 8 bits Sync. method Asynchronous S top bit 1 bit Baud rate 9 600 bps X p arameter None Parity None S p arameter None Command Control content s Remarks PON POWER ON In standby mode, all commands other tha ...
-
Panasonic PT-AX200E - page 48
Appendix Technical Information 48 - E NGLISH S pecifications Power supply AC 100 - 240 V 50 Hz/60 Hz Power consumption 290 W During standby (when fan is stopped): 0. 08 W Amp s 3.5 A - 1.5 A LCD panel Panel size (diagonal) 0.7 type (17.78 mm) Aspect ratio 16 : 9 Display method 3 transparen t LCD panels (RGB ) Drive method Active matrix method Pixel ...
-
Panasonic PT-AX200E - page 49
Technical Information E NGLISH - 49 Appendix T erminals S-VIDEO IN Single - line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω VIDEO IN Single - line, RCA pi n jack1. 0 V [p-p], 75 Ω COMPUTER IN Single - line, D - sub HD 15-pin (fem ale) R.G.B. 0.7 V [p-p], 75 Ω G.SYNC 1.0 V [p-p], 75 Ω HD/SYNC TTL high impedance, au tomatic positive/ ...
-
Panasonic PT-AX200E - page 50
Appendix Technical Information 50 - E NGLISH The projector and the ceiling mo unt bracket are d esigned su fficiently safety though, make sure the safety cable provided wit h the projecto r is installed and attached to the secur ity lock slot of the projecto r when moun ting in the ceiling for safety and security. J Inst alling the safety cable 1. ...
-
Panasonic PT-AX200E - page 51
Technical Information E NGLISH - 51 Appendix VGA and XGA are tradem arks of Int ernational Busin ess Machines Corporation. S-VGA is a regi stered trademar k of the V ideo Electro nics S tandards Asso ciation. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trade marks of HDMI Licensing LLC. The font used i ...
-
Panasonic PT-AX200E - page 52
52 - E NGLISH Appendix Index A AC IN ................ ................ ................ ................. ..... 13 Accessories ........... ................ ................. ................ .. 10 ADVANCED MENU ............. ................ ................. ..... 31 Air exhaust port ............ ................ ................ ............ 12 A ...
-
Panasonic PT-AX200E - page 53
Appendix Index E NGLISH - 53 M MAIN POWER .......... ................ ................. ............... 13 Mains lead Accessory ....................... ................ ................. ..10 Connecting ...... ................ ................ ................. ..19 MENU Control panel button ......... ................ ................. ..12 Remote ...
-
Panasonic PT-AX200E - page 54
http://www.pureglare.com.au ...
Do you have a question concerning Panasonic PT-AX200E?
Use the form below
If you did not solve your problem by using a manual Panasonic PT-AX200E, ask a question using the form below. If a user had a similar problem with Panasonic PT-AX200E it is likely that he will want to share the way to solve it.