-
Haier HSU-12CG13 - page 1
No.0010558101 SPLIT TYPE R OOM AIR CONDITIONER OPERA TION MANU AL Please read this operation man ual before using the air conditioner. HSU-09CG13 HSU-12CG13 HSU-14CG13 ...
-
Haier HSU-12CG13 - page 2
Bef ore disposing an old air conditioner that goes out of use, please mak e sure it's inoperativ e and safe . Unplug the air conditioner in order to av oid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require speciali- zed w aste disposal. The v aluable materials contained in an air ...
-
Haier HSU-12CG13 - page 3
F or the pur pose of the safety ,the air con- ditioner must be properly grounded in acco- rdance with specifications. Alwa ys remember to unplug the air conditioner bef ore openning inlet gr ill. Nev er unplug your air conditioner b y pulling on the pow er cord. Always g r ip plug firmly and pull straight out from the outlet. All electrical repairs ...
-
Haier HSU-12CG13 - page 4
3 1.Applicable ambient temperature range: The machine is adaptive in following situation Cautions 3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V. 4. The distance between the indoor unit and the floor should be more than 2m. 5. The wiring method should be in line with the local wiring standard. 6. After installa ...
-
Haier HSU-12CG13 - page 5
4 Parts and Functions Remote signal receiver Operation mode indicator Timer mode indicator Power indicator Vertical flap Air filter Inlet grille Emergency switch(manual) Test running switch(manual) Use remote controller to adjust up and down air flow. (Don't adjust it manually.) Lights up when unit starts. Lights up when Timer operation is sel ...
-
Haier HSU-12CG13 - page 6
5 Hints After replacing with new batteries, remote controller will conduct self-check, displaying all information on LCD. Then, it will become normal. Clock set When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: Press CLOCK button, "AM" or "PM" flashes ...
-
Haier HSU-12CG13 - page 7
6 Operation When in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and the receiver hole should be within 7 m without any obstacle as well. Don't throw the controller, prevent it from being damaged. When electronic-started type fluorescent lamp or change ...
-
Haier HSU-12CG13 - page 8
7 Operation (4) Unit stop (1) Unit start mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up. (2) Select operation mode Press MODE button. For each press, operation AUTO COOL DRY HEAT FAN Unit will run in selected mode. Stop display at ...
-
Haier HSU-12CG13 - page 9
Operation Press MODE button. For each press, operation Recommendations: 8 COOL,HEA T and DR Y operation Use COOL in summer. Use HEAT in winter Use DRY in spring, autumn and in damp climate. (1) Unit start mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on i ...
-
Haier HSU-12CG13 - page 10
9 (5) Air flow direction adjustment After operation mode is selected, vertical flap will open automatically according to the mode. Referring to the Fig. COOL HEAT COOL HEAT About 10 o About 60 o About 10 o About 45 o About 60 o better set a temp. difference of 3-5 o C between indoor and outdoor temp. in COOL mode. Hints As cold air flows downward i ...
-
Haier HSU-12CG13 - page 11
10 Operation TIMER Operation You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night. Set Clock correctly before starting Timer operation TIMER ON/OFF Power indicator on indoor unit lights up. (1)After unit start, select your desired operation mod ...
-
Haier HSU-12CG13 - page 12
11 TIMER ON-OFF TIMER ON-OFF To cancel TIMER mode Power indicator on indoor unit lights up. (1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD. ON OFF ON OFF TIMER ON TIMER OFF TIMER ON-OFF blank Every time the button is pressed, display changes as follows: (2) Press TIMER button to change TIMER mode. S ...
-
Haier HSU-12CG13 - page 13
Pi Pi...Pi 12 Emer g ency and T est Operation Use this operation only when the remote controller is def ective or lost. When the emergency operation s witch is pressed,the" Pi "sound is heard once, which means the star t of this operation. In this operation, it is possible to change the settings of temperature and air flow speed, it is al ...
-
Haier HSU-12CG13 - page 14
13 Comfortable SLEEP Operation In COOL mode sleep in selected mode. Before going to bed at night, you can simply press the SLEEP button and unit will bring you a sound One hour after SLEEP mode starts, temp. will become 1 o C higher than temp. setting. After running for another 1 hour, temp. rises by 1 o C further. Unit will run for 6 hours then st ...
-
Haier HSU-12CG13 - page 15
14 Maintenance Different models have different appearance Cleaning of unit casing Cleaning of remote controller Cleaning of air filter Cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. squeeze water in the cloth, wipe off the detergent on unit casing completely. Don't use ...
-
Haier HSU-12CG13 - page 16
15 Maintenance Better use of air conditioner Proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windows during operation Never fail to observe the followings Do not sprinkle water over the unit. Do not block the inlet or outlet. Do not pull power plug. Do not use for other purposes. Such as food pr ...
-
Haier HSU-12CG13 - page 17
16 T rouble shooting Before asking for service, check the following first. Normal Performance inspection Noise is heard Phenomenon Cause or check points The system does not restart immediately. Smells are generated. Mist or steam are blown out. Multiple check Does not work at all. Poor cooling Application temp. range of air conditioner -7 o C~43 o ...
Do you have a question concerning Haier HSU-12CG13?
Use the form below
If you did not solve your problem by using a manual Haier HSU-12CG13, ask a question using the form below. If a user had a similar problem with Haier HSU-12CG13 it is likely that he will want to share the way to solve it.