English dropdown-ico

Manual AGFA 1815 Copier

116 pages 3.75 mb
Download

Go to site of 116

Summary
  • AGFA 1815 Copier - page 1

    1815 Basic Operation Guide ...

  • AGFA 1815 Copier - page 2

    ...

  • AGFA 1815 Copier - page 3

    i CONTENTS 1 Inst allation ....... ................................. ................................................. ............. 1-1 Unpacking ... ................. ................. .............. ................. ................ .............. ................. .. .... ..1-1 Installing the T oner Container ............ ................. ... ...

  • AGFA 1815 Copier - page 4

    ii Document Processor ... ................ ............ ................ .............. ................. .............. ................ ... 5-1 Acceptable Originals .................... ................. ................. ................ ................. ................. .. 5-2 Originals to Avoid .............. ................. .............. ...

  • AGFA 1815 Copier - page 5

    iii Making Full Use of This Ma chine’ s Advanced Functions 1 Enlarging/reducing copies to a desired size between 50 % and 200 % Zoom mode (See pag e 4-7 ) 2 Copying at a previou sly registered zoom ratio Stan dar d zoom mode (See p age 4-6 ) 3 Making clear rep roductions of photographs Image qu ality selection (See page 4-2 ) 4 Saving on toner us ...

  • AGFA 1815 Copier - page 6

    iv Caution No liability is assumed for any damage caused by improper installation. Notice The information in this gui de is subject to change without notification. Additio nal pages may be inserted in future editions. The user is asked to excuse any technical inaccu racies or typographical errors in the present edition. No responsibility is assumed ...

  • AGFA 1815 Copier - page 7

    v Agfa Jap an License Agreement 1. “Software” shall mean the digi tally encoded, machine readabl e, scalable outline data as encoded in a special format as well as the UFST Software. 2. Y ou agree to accept a non-exclusive lice nse to use the Software to reproduce and display weights, styles and versions of le tters, numerals, char acters and s ...

  • AGFA 1815 Copier - page 8

    vi We have determined as a participating company in the Internationa l Ener gy S tar Program that this product is compliant with the standards laid out in the Internationa l Energy S t ar Program. International Energy S tar Program has as its ba sic goals the promotion of ef ficient energy use and the reduction of the envir onmental pollu tion that ...

  • AGFA 1815 Copier - page 9

    vii Please read t his Operation Guide before usi ng the machine. Ke ep it close to th e machine for easy r eference. Please read this Operation Guid e before using this machine. Keep it close to the machine for easy reference. The sections of this guide and parts of the ma chine marked with symbols a re safety warnings meant to protect the user , o ...

  • AGFA 1815 Copier - page 10

    viii The following symbols indicate that the related section includes information on actions which must be performed. S pecifics of the required action are indicated inside th e symbol. Please contact your service representative to orde r a replacement if the safety warnings in this Operation Guide are illeg ible or if the guide itself is missing. ...

  • AGFA 1815 Copier - page 11

    ix IMPORT ANT! PLEASE READ FIRST . CAUTION LABELS Caution labels have been attached to the machine at th e following locations for safety purposes. Be sufficiently careful to avoid fire or elec tric shock when removing a p aper jam or when replacing toner . Note Do not remove these labels. Label 1 High temperature inside. Do not touch parts in this ...

  • AGFA 1815 Copier - page 12

    x INST ALLA TION PRECAUTIONS Environment Caution Avoid placing the machine on or in locations which are unstable or not level. Such locations may cause the machine to fall down or fall over . This type of situation presents a danger of personal injury or da mage to the machine. ........................... ... Avoid locations with humidity or dust a ...

  • AGFA 1815 Copier - page 13

    xi Power supply/Grounding th e machine Wa r n i n g Do not use a power supply wi th a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fi re or electrical shock. .................... ................. ................ ................. .............. ................. .. ...

  • AGFA 1815 Copier - page 14

    xii If the machine becomes excessively hot, smoke appears from the machine, there is an odd smell, or any other abnormal situation occurs, there is a danger of fire or electrical shock. T urn the power switch off ( { ) immediately , be absolutely certain to remove the power plug fro m the outlet and then contact your service representative. If anyt ...

  • AGFA 1815 Copier - page 15

    xiii Do not look directly at the light from the scanning lamp as it may cause your eyes to feel tired or painful. Cautions when handling consumables Caution Do not attempt to incinerate the toner container . Dangerous sparks may cause burns. Keep the toner container out of the reach of children. ...................... ................. ......... If ...

  • AGFA 1815 Copier - page 16

    xiv SAFETY OF LASER BEAM 1. Safety of Laser Beam This copier has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U. S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal opera tion and maintenance. The laser optical syst ...

  • AGFA 1815 Copier - page 17

    xv 1815 COPIER LIMITED W ARRANTY 1. Kyocera Mi ta America, Inc. and Kyocer a Mita Canada, Ltd. (both refe rred to as "Kyocer a Mita") warrants the Customer's new Multifunctional Product ( refferred to a s "MFP"), and the new accessories installed with the initia l installation of the MFP , against any defects in mater ial a ...

  • AGFA 1815 Copier - page 18

    xvi Introduction This Basic Operation Guide has following chapters: 1I n s t a l l a t i o n Contains initial installation and set-up procedures. 2N a m e s o f P a r t s Identifies the names and functions of the machine and operation panel. 3 Prep arations Contains explanations on loading paper and attaching the Face-up Tray . 4 Basic Operation Ex ...

  • AGFA 1815 Copier - page 19

    xvii Guides included The following guides are included with this machine. Refe r to the guide that corresponds to your particular objective. Basic Operation Guide (This guid e) This Basic Operati on Guide contains explanation s on the initial installation and set-up of this machine, the procedure to connect it to a co mputer , and the basic procedu ...

  • AGFA 1815 Copier - page 20

    xviii Conventions This manual uses the following convention s: 1B o l d indicates key names. 2 Courier indicates content of the message disp lay . 3N o t e , Import ant , and Caution contain important information aside from the text. 4 Italic refers to another page or other guide. 2 3 4 1 ...

  • AGFA 1815 Copier - page 21

    1-1 1I n s t a l l a t i o n Be sure to perform the followi ng installation procedure prior to using this machine. Unp acking 1 Remove all of the components to the machine from the box. Cautions • Be sure to hold both the front and rear sides of the machine when carrying it, as shown in the illustration. • Be sure not to pull the cassette out w ...

  • AGFA 1815 Copier - page 22

    Installation 1-2 3 Open the original cover. 4 Remove the 8 pieces of packing tape (C) , the 2 pieces of protective packing (D) and the protective sheet (E) . 5 Pull the cassette ou t of the machine. 6 Remove the protective packing (F) from inside the cassette. (D) (E) (D) (C) (C) (C) (C) (C) (C) (C) (C) (F) ...

  • AGFA 1815 Copier - page 23

    Installation 1-3 7 T urn the yellow transp ort pin (G) on the left side of the machine counter-clockwise to remove it and the paper tag (H) . (Refer to page 1-3 for information on where and how to store the pin.) 8 Open the top cove r (I) . 9 Open the front cover (J) . 10 S tore the yellow transport pin (G) [that you removed in step 7] on the insid ...

  • AGFA 1815 Copier - page 24

    Installation 1-4 Important • Place the process unit on a clean, level surface. • Never expose the process unit to any sort of impact or shock. • The drum in the process unit is sensitive to lig ht. Never expose the drum even to normal office lighting (500 lux) for more than five minu tes. 2 Move the lock lever (L) towards you until it is in i ...

  • AGFA 1815 Copier - page 25

    Installation 1-5 6 Push the lock lever (L) back into its locked position (away from you). 7 Set the process unit into the machine by alig ning the pins (N) on both sides of the process unit with th e guides inside the machine, and then slide the process unit into the machine until it stops. 8 Close the front cover and top cover . T urning the Machi ...

  • AGFA 1815 Copier - page 26

    Installation 1-6 Using the One-T ouch Key Sheet The one-touch key sheet allows you to record destination informa tion regi stered unde r the one-touch keys. Place the sheet next to the one-touch keys. Enter the destinations onto the one-touch ke y sheet. (four spare one-touch key sheets are included with the machine.) A- - - - - - B- - - - - - C- - ...

  • AGFA 1815 Copier - page 27

    2-1 2 Names of Part s Main Body 1 Original Cover — Open/close this cover when you are setting the original on the platen. 2P l a t e n — Set originals onto the platen. Be sure to lay originals face-down and align them flush up against the left rear corner of the platen. 3 Original Size Indicator Plate — Be sure to align originals flush up ag ...

  • AGFA 1815 Copier - page 28

    Names of Parts 2-2 12 Output T ray — Finished copies or printouts can be ejected and stored on this tray . 13 Stopper Extension Lock — Use this lock when lo ading Folio or Oficio II size paper in the cassette. 14 Paper Stopper — Adjust this stopper to fit the l ength of the paper in the cassette. 15 Paper W idth Gu ides — Adjust these guide ...

  • AGFA 1815 Copier - page 29

    Names of Parts 2-3 20 Document Processo r Connector — Attach the connection cable here when installing the optional document processor . 21 Parallel Interface Connector — Use a parallel ca ble to connect the connector with a parallel port of your computer . 22 USB Interface Connector — This USB interface conforms to Hi-Speed USB2.0. Use a USB ...

  • AGFA 1815 Copier - page 30

    Names of Parts 2-4 Operation Panel 1 St atus/J ob Cancel Key and Indicator — Press this key to light th e indicator to access the Status menu screen. For details, refer to Chapter 4 in Advanced Operation Guid e . 2 Copy Key and Indicator — Press this key to use the copier functions of this machine. The indicator will ligh t when the machine is ...

  • AGFA 1815 Copier - page 31

    Names of Parts 2-5 14 Main Po wer Indicato r — This indicator lights red when the power switch is turned on ( | ). 15 Original Quality Key and Indicator — Press this key to light the i ndicator to select the original quality . See page 4-2 . 16 Original Size Key a nd Indicator — Press this key to light the indica tor to select th e size of th ...

  • AGFA 1815 Copier - page 32

    Names of Parts 2-6 Message Display The following examples explain the messages and icons used on the message disp lay . Re a dy to c op y. A 4 A 4 Se t Zoo m 100% :1 :h _pttr @owl -n et . net Re a dy to s e nd. Des t. Subje c t Pl ac e mnt Le f t Of f :1 1 3 4 5 2 7 6 8 9 Copier Screen Scanner Screen 10 11 12 13 Reference number Meaning 1 Indicates ...

  • AGFA 1815 Copier - page 33

    3-1 3 Prep arations Loading Paper Paper can either be loaded into the cassette or set on th e MP tray . For details on the media types that can be u sed, refer to the Advanced Operation Guide . Notes • Af ter taking new paper out of its packaging, be sure to fan through them a few times to separate the sheets before loading the paper into a casse ...

  • AGFA 1815 Copier - page 34

    Prepar ations 3-2 2 Adjust the paper stopper in the rear portion of the cassette by pressing in on the relea se buttons and sliding the paper stopper to the fit the size o f the paper being loaded. The paper sizes are marked on the bottom of the cassette. The factory default setting is A4/Letter size paper . For information on adjusting the paper s ...

  • AGFA 1815 Copier - page 35

    Prepar ations 3-3 6 Register the paper size loaded in the correspondi ng cassette abo ve by using the operation panel. For detail, refer to Chapter 5 in Advanced Operation Guide , Selecting Paper Size and Media Ty p e . Adjusting the Paper St opper for Folio or Oficio II Size Page Perform the following procedure to adjust the paper st opper to load ...

  • AGFA 1815 Copier - page 36

    Prepar ations 3-4 Loading Paper on the MP T ray S tandard p aper (60 to 90 g/m²), thick paper (90 to 163 g/m²), color p aper , transparencies, and letterhead paper can be se t on the MP tray . Always use the MP tray when copying and p rinting onto special paper . The types of paper and the number of sheets that can be set on the MP tray at one ti ...

  • AGFA 1815 Copier - page 37

    Prepar ations 3-5 2 Pull out the MP tray extension an d then flip it open. 3 Adjust the paper width guides to fit the width of the paper . 4 Slide the paper all the way in, along the paper width guides, as far as it will go. When you are setting paper on th e MP tray , make sure that the side to be copied or printed onto is facing upwar d. Notes ? ...

  • AGFA 1815 Copier - page 38

    Prepar ations 3-6 Using the Face-up T ray When copying and printing onto special paper , such as thick paper (90 to 163 g/m²), a nd transparencies, always use the face-up tray . T he face-up tray has a storage cap acity of approximately 30 sheets of standard paper (80 g/m²) bu t only 1 sheet of speci al paper should be stored there at one time. N ...

  • AGFA 1815 Copier - page 39

    Prepar ations 3-7 Connecting the Cables The machine has the connectors for connection wit h either network or directly to a co mputer . Connecting the Network Cable T o connect th e machine to a network, use an network cabl e (10Base-T or 100Base-TX). 1 T urn the power switch located on the rear side of the machine of f ( { ), and remove the power ...

  • AGFA 1815 Copier - page 40

    Prepar ations 3-8 2 Connect the printer cable (not included) to connector located at the rear sid e of the machine. 3 Connect the other end of the printer cable to the parallel interface connector or USB interface connector on your computer . Connecting the Power Cord Connect the power cord to the powe r cord receptacle at the rear side of the mach ...

  • AGFA 1815 Copier - page 41

    Prepar ations 3-9 T urning the Power Switch On T urn the power switch on ( | ). The machine will begin to warm up. Once wa rm-up is completed, the basic screen is displayed. * Re ady to copy. A 4 A 4 Se t Z oom 100% :1 ...

  • AGFA 1815 Copier - page 42

    Prepar ations 3-10 Network Settings Registering the IP Address Perform the following procedure to assign the IP address. Notes • T o connect the mach ine to the network using TCP/ IP protocol, you must set the IP address on the machine. The IP address must be uni que to t he mach ine and should be obtained from your network administ rator . • A ...

  • AGFA 1815 Copier - page 43

    Prepar ations 3-11 5 Press the Enter key . 6 Press the S key or the T key to select TCP/IP Setting . 7 Press the Enter key . 8 Press the S key or the T key to select IP Address . 9 Press the Enter key . * Ne tw or k Setti ng : Back Apple T alk Set. TC P / IP S e t t ing Exit * T CP/IP Settin g: TC P / IP DHCP Exit I P Addre s s ...

  • AGFA 1815 Copier - page 44

    Prepar ations 3-12 10 Use the keypad to enter the IP address. Enter the first segment of the IP address. 11 Press the X key and enter the second segment of the IP address. 12 Press the X key and enter the third segment, then press again and enter the last segment. 13 Press the Enter key . The message display shows Completed and returns to the TCP/I ...

  • AGFA 1815 Copier - page 45

    Prepar ations 3-13 2 Press the Enter key . 3 Enter the Subnet Mask address, starting the first segment. Next, perform the following procedure to assign the Default Gateway . Registering the Defaul t Gateway T o assign the Defaul t Gateway , repeat steps 1 to 7 in the above procedure. 1 Press the S key or the T key to select Default Gateway . 2 Pres ...

  • AGFA 1815 Copier - page 46

    Prepar ations 3-14 4 When you finish making all of the network setting, press the right select key . The message display returns to the basic screen. * IP A d d r e ss Subne t Ma s k Exit Def a ul t Gate wa y TC P / IP S e t t ing : ...

  • AGFA 1815 Copier - page 47

    Prepar ations 3-15 Setting the Time Zone Perform the following procedure to select th e time zone. Y ou can also make this setting using CO MMAND CENTER. Fo r details on COMMAND CENTER, refer t o Chapter 5 in Advanced Op eration Guide , Time Zone . 1 Press the System Menu/Counter key . 2 Press the S key or the T key to select Date/Timer Set . 3 Pre ...

  • AGFA 1815 Copier - page 48

    Prepar ations 3-16 5 Press the Enter key . 6 Press the S key or the T key to select the time zone that you are in. 7 Press the Enter key . The message display shows Completed and returns to the Date/Timer Set. screen. 8 Press the right select key . The message display returns to the basic screen. - 05:00 I ndi ana Cancel Au to S l eep: - 05:00 B og ...

  • AGFA 1815 Copier - page 49

    Prepar ations 3-17 Setting the Date and Time Perform the following procedure to set the current date and time. Y ou can also make this setting using CO MMAND CENTER. Fo r details on COMMAND CENTER, refer t o Chapter 5 in Advanced Op eration Guide , Date and Time . 1 Press the System Menu/Counter key . 2 Press the S key or the T key to select Date/T ...

  • AGFA 1815 Copier - page 50

    Prepar ations 3-18 5 Press the Enter key . The Date Setting screen (year/month/date) is displayed . 6 Press the S key or the T key to register the current year . 7 Press the X key . 8 Press the S key or the T key to register the current month. 9 Press the X key . Da te Setti ng : 2004 04 15 Ye a r M o n t h D a y Cancel ) Tim e Z o n e ( : Green wi ...

  • AGFA 1815 Copier - page 51

    Prepar ations 3-19 10 Press the S key or the T key to register the current date. 11 Press the Enter key . The time setting screen (hour:minute:second) is displa yed. 12 Press the S key or the T key to register the current hour . 13 Press the X key . 14 Press the S key or the T key to register the current minute. c Da te Setti ng : Ye a r M o n t h ...

  • AGFA 1815 Copier - page 52

    Prepar ations 3-20 15 Press the X key . 16 Press the S key or the T key to register the current second. 17 Press the Enter key . The message display shows Completed and returns to Date/Timer Set. screen. 18 Press the right select key . The message display returns to the basic screen. Cancel c T i m e Se tti ng : 11 45 50 Hou r M i n S econ d :: (Ti ...

  • AGFA 1815 Copier - page 53

    Prepar ations 3-21 Summer Time Setting Perform the following proce dure to turn the su mmer (daylight saving) time setting on and off. Y ou can also make this setting using CO MMAND CENTER. Fo r details on COMMAND CENTER, refer t o Chapter 5 in Advanced Op eration Guide , Summer Time . Note This setting is valid only in the area where summer time i ...

  • AGFA 1815 Copier - page 54

    Prepar ations 3-22 5 Press the Enter key . 6 Press the S key or the T key to select either On or Off . 7 Press the Enter key . The message display shows Completed and returns to the Date/Timer Set. screen. 8 Press the right select key . The message display returns to the basic screen. * Summe r T ime: On *O ff Cancel Da te /Ti m er S e t. : Time Z ...

  • AGFA 1815 Copier - page 55

    Prepar ations 3-23 Default Operation Mode Use the following procedure to set the operation mode selected when the machine is powered on. Modes available are Copy Operatio n, Scanner Operation or S tatus Operation. It is recommended you select the most comm only used mode as the def ault. 1 Press the System Menu/Counter key . 2 Press the S key or th ...

  • AGFA 1815 Copier - page 56

    Prepar ations 3-24 6 Press the S key or the T key to select the default operation mode from among Copy , E-mail or Status . 7 Press the Enter key . The message display shows Completed and returns to Common Setting . 8 Press the right select key . The message display returns to the basic screen. Defa u l t O per at. : E-ma il Cop y * Cancel Sta tus ...

  • AGFA 1815 Copier - page 57

    Prepar ations 3-25 Character Entry T o enter e-mail address, etc., the characters are en tered using Keypad. T o move the cursor , use the W , S , T , and X keys. Keys Used for En tering Characte rs 1C u r s o r — Characters are entere d in the location of t he cursor . T o delete a ch aracter , move the cursor to the location of the correspondin ...

  • AGFA 1815 Copier - page 58

    Prepar ations 3-26 A vailable Characters The following characters a re available for enterin g characters. Press the right s elect key to switch between types of characters. List of Characte r Assignment s The following characters can be entered using the keypad. T ype A vailable Character s Alphabetic/Symbol Text Æ ABC Refer to List of Char acter ...

  • AGFA 1815 Copier - page 59

    Prepar ations 3-27 Entering Characters This section explai ns the procedure to enter c haracters such as for e-mail address, etc. The example here uses the List of Character Assignments on page 3-26 to enter the e-mail address (h_pttr@owl-net.net). T he displayed character will chang e ea ch time a particular key is pressed, so you must press the X ...

  • AGFA 1815 Copier - page 60

    Prepar ations 3-28 4 Press the j key . t is displayed. 5 Press the X key . The cursor will move on e space to the right. T o repeatedl y enter the same chara cter , press the X key to move the cursor and then enter that characte r again. 6 Press the j key . t is displayed. 7 Press the i key 3 times. r is displayed. 8 Press the c key 2 times. @ is d ...

  • AGFA 1815 Copier - page 61

    Prepar ations 3-29 9 Enter the rest of the charac ters in the same way , and press the Enter key . Registered will appear and the message display returns to the basic screen. Selecting Message Language Y ou can select the language of the messages display by following the procedure given bel ow . Y ou can optionally download messages in other langua ...

  • AGFA 1815 Copier - page 62

    Prepar ations 3-30 ...

  • AGFA 1815 Copier - page 63

    4-1 4 Basic Operation This chapter contains explan ations on the fo llowi ng procedures and modes. Refer to the Advanced Operation Guid e for details on other functions. • Basic Copying Procedure • Canceling Copy • Zoom Copies • Collate Mode •L o w P o w e r M o d e • Auto Sleep • Basic Scanning Procedure • Selecting Color Scan Mode ...

  • AGFA 1815 Copier - page 64

    Basic Operation 4-2 Notes • For details on selecting the paper size and media type to be used in the cassette and MP tray , refe r to Chapter 1 Advanced Operatio n Guide , Copying Func tions . • Y ou can change the default setting for which cassette will be automatically selected. For details, refer to Chapter 5 Advanced Opera tion Guide , Syst ...

  • AGFA 1815 Copier - page 65

    Basic Operation 4-3 7 Enter the number of copies required. Up to 999 can be entered. 8 Open the original cover and set the original face-do wn onto the platen. Be sure to align the original fl ush up against the left rear corner of the platen. 9 Press t he Star t key . Copying begins immediately once the Start key will light. T o cancel copyi ng, p ...

  • AGFA 1815 Copier - page 66

    Basic Operation 4-4 Canceling Copy Perform the following procedure to cancel copying. 1 Press the Sto p /C le a r key . The Pausing Job List screen, which shows a list of copying jobs being processed, will be d isplayed. 2 Press the S key or the T key to select the copying j ob to cancel. 3 Press the left select key . 4 The message display indicate ...

  • AGFA 1815 Copier - page 67

    Basic Operation 4-5 7 Press the right select key . The Status Menu screen is displayed and processing of jobs are resumed. 8 T o enable copyin g again, press the Copy key . The message display return s to the basic screen. ...

  • AGFA 1815 Copier - page 68

    Basic Operation 4-6 Zoom Copies It is possible to change the zoom ratio in order to make copies of an enlarged or reduced size. The following modes are availabl e for selecti ng the desired zoom ratio. St andard Zoom Perform the following procedure to make se ttings for the St andard Zoom mode. 1 Press the Copy key . 2 Press the left select key . M ...

  • AGFA 1815 Copier - page 69

    Basic Operation 4-7 3 Press the S key or the T key to select Standard Zoom. 4 Press t he Enter key . 5 Press the S key or the T key to select the desired zoom ratio. 6 Press the Enter key . The message display shows Completed and returns to the basic screen. The new zoom ratio i s registered. T o start copying, place the original on the pla ten and ...

  • AGFA 1815 Copier - page 70

    Basic Operation 4-8 2 Press the left select key . 3 Press the S key or the T key to select Zoom Entry . 4 Press the Enter key . 5 Press the S key or the T key , as appropriate, to change the displayed zoom ratio to the desired ratio. 6 Press the Enter key . The message display shows Completed and returns to the basic screen. The new zoom ratio is r ...

  • AGFA 1815 Copier - page 71

    Basic Operation 4-9 Collate Mode Multiple originals ca n be collated in the desi red number of copies. T o use the co llate mode turn the continu ous scan function on. For details, refer to Chapter 1 Advanced Operation Guid e , Continuo us Copyin g . Notes • The maximum number of originals to scan depends on the availa ble memory in the machine. ...

  • AGFA 1815 Copier - page 72

    Basic Operation 4-10 4 Press the Enter key . 5 Press the S key or the T key to select On. 6 Press the Enter key . The message display shows Completed and returns to the Function screen. 7 Press the right select key . 8 Use the numeric keys to enter the desired number of copies. * C olla t e : * Cancel Of f On * Com b i n e Z oom Col l ate Fu n cti ...

  • AGFA 1815 Copier - page 73

    Basic Operation 4-11 9 Set the original. 10 Press the Sta rt key . Scanning of the first original will start. A message will be displayed telli ng you to set the next original. 11 Replace the first original with the next one and press the Start key . Scanning will start. 12 Once all of the original s have been sca nned, press the right select [En d ...

  • AGFA 1815 Copier - page 74

    Basic Operation 4-12 Low Power Mode The machine has a Low Power Timer that is used to conserve power when the machin e is not copying, scanning, pr inting, or receivi ng data. Y ou can adjust the timer timeout time, the length o f time (between 1 minute and 240 minutes) the machine waits before entering low power mode in the ab sence of dat a. The ...

  • AGFA 1815 Copier - page 75

    Basic Operation 4-13 Basic Scanning Procedure This section explains the basic procedures required when scanning documents. The following procedure explains th e method for attaching scan data to e-mail fo r transmission. Notes • A network environment in wh ich this machine ca n connect to a mail server is required in order to use the e-mail funct ...

  • AGFA 1815 Copier - page 76

    Basic Operation 4-14 4 Press the Enter key . 5 Enter the destination e-mail address. Refer to Character Entry on page 3-25 for information on entering characters. 6 Once you have finished entering the information, press the Enter key . 7 T o enter a subject and/or messa ge, press the right select key . If you do not need sub ject and message, go di ...

  • AGFA 1815 Copier - page 77

    Basic Operation 4-15 9 Press the Enter key . The Registered screen is displayed, and the message display returns to the scanner basic screen. Note T o use scanner advanced function s, such as original quality and scan resolution. Refer to Chapter 2 Advanced Operatio n Guide , Scanning Fu nctions . 10 Set the original. 11 Press the Sta rt key . Scan ...

  • AGFA 1815 Copier - page 78

    Basic Operation 4-16 Selecting Color Scan Mode The following color modes are avai lable for scanning: Notes •R e f e r t o Chapter 2 A dvanced Operatio n Guide , Selecting Color Scan Mode . • The maximum resolution using full color or gray scale modes is 300 dpi. T o scan in full color or gray scale with 400 dpi or 600 dpi resolution, expa nsio ...

  • AGFA 1815 Copier - page 79

    Basic Operation 4-17 Basic Printing Procedure Make sure that the machine’s printer cable and network cable and the power cord are properly connected. Inst alling the Printer Driver T o use the printer functi on, the printer driver must be installed. For information on how to install the printer driver software, refer to the KX Printer Drivers Op ...

  • AGFA 1815 Copier - page 80

    Basic Operation 4-18 5 Click the Properties button to access the Properties dialog box. 6 From the Media t ab, click the Page Siz e drop down list and select the page size that matches the document to print. The example below sho ws A4 -size selected. For best results when printing on transparencies or recycled paper (the back side of p aper which ...

  • AGFA 1815 Copier - page 81

    5-1 5 Optional Equipment A vailable Options The following optional equipmen t are available for use with your machine. Document Processor The document processor automatically feeds and scans multiple sheet originals one by one. Important Be sure that the document processor is closed whenever transporting the machi ne. Document Processo r Exp ansion ...

  • AGFA 1815 Copier - page 82

    Optional Equipment 5-2 Accept able Originals • Use sheet original s only • Paper weight: 5 0 to 120 g/m² • Paper sizes: 8 1/2 × 14"/Legal and Folio (Maximum), 5 1/ 2 × 8 1/2 "/S tatement and A5R (Minimum) • Maximum number which can be set at one time: 50 sheets (50 to 80 g/m²) Originals to A void Be sure not to use the followi ...

  • AGFA 1815 Copier - page 83

    Optional Equipment 5-3 Important • Before setting new original s, make sure that there are no other originals remaining on the original eject table. Originals left on the eject table can cause other originals to jam. • Be sure to fan through the originals a few times to separate the sheets before setting them in the document processor . 2 Arran ...

  • AGFA 1815 Copier - page 84

    Optional Equipment 5-4 Placing a Book, etc. on the Platen When copying from an original which cannot be set in the document processor (books, magazines, etc.), lift open the document processor and set th e original directly on th e platen. Note Shadows may appear around th e edges and up the middl e of copies made from open-faced originals (such as ...

  • AGFA 1815 Copier - page 85

    Optional Equipment 5-5 Inst alling DIMM Contact your dealer for information on purchasi ng DIMM that is best suited for use with this machine. Insert DIMM into the socket as follows: 1 T urn off the machine, disconnect the pow er cord and disconnect the machine cable. 2 Remove the screw from the rear of the machine and remove the side cover . 3 Rem ...

  • AGFA 1815 Copier - page 86

    Optional Equipment 5-6 ...

  • AGFA 1815 Copier - page 87

    6-1 6 MaintenanceImport ant Cleaning the Machine Lift open the original cover and wipe platen and original cover , as shown in the illustration, with a soft cloth dampened with alcohol or mild detergent. Important Never use thinner or other organic solvents to clean the original cover . If the optional document processor is installed in your machin ...

  • AGFA 1815 Copier - page 88

    MaintenanceImport ant 6-2 T oner Cont ainer Replacement If Replace Toner appears on the message displ ay , replace the toner container . In addition, perform the appr opriate cleaning operation whenever you re place the toner container , see Cleaning the Charger and the Registration Roller on page 6-4 . Online Help Messages With the online help mes ...

  • AGFA 1815 Copier - page 89

    MaintenanceImport ant 6-3 Important • Place the process unit on a clean, level surface. • The drum in the process unit i s sensitive to li ght. Never expose the dru m even to normal office lighting (500 lux) for more than five minutes. • Never stand the process unit on end. 4 Pull the lock lever towards you into its release position (marked U ...

  • AGFA 1815 Copier - page 90

    MaintenanceImport ant 6-4 7 Remove the orang e protective seal. 8 Align the knob on the left side of the container with the groove in the process unit and set the toner container into the proce ss unit. Push on the PUSH HERE marks on the toner container unti l the container clicks into place. 9 Push the lock lever back into its locked position (awa ...

  • AGFA 1815 Copier - page 91

    MaintenanceImport ant 6-5 Important After cleaning, make sure you restore the charger cleaner to its home position. If the charger cleaner is not restored to the CLEANER HOME POSITION , a black band will appear on subsequent copies. 2 Use the cleaning cloth that is supplied with the new toner kit to wipe off any paper dust and dirt that has accumul ...

  • AGFA 1815 Copier - page 92

    MaintenanceImport ant 6-6 ...

  • AGFA 1815 Copier - page 93

    7-1 7 T roubleshooting General Guidelines The table below provide s basic solutions for problems you may encounter with the machine. We suggest you consult this table to troubles hoot the probl ems before calling for service. Symptom Check Item Corrective Actio n Reference Page Nothing lights on the operation panel when the power switch is turned o ...

  • AGFA 1815 Copier - page 94

    T roubleshooting 7-2 Black or white vertica l bands appea r on the copies. Is the charger cleaner in i ts home position (ma rked CLEANER HOME POSITION )? Remove the process unit and return the charger cleaner to its home position. 6-4 If you are using the optional document processor , is the slit glass dirty? Clean the slit glass. It is also possib ...

  • AGFA 1815 Copier - page 95

    T roubleshooti ng 7-3 Maintenance and Error Messages When any of the following messages appears on the me ssage display , perform the procedure provided below . Message Procedure Reference Page Add paper to (paper source) . The paper has run out. Supply paper according to the paper source that is Casset. 1 or Casset. 2 (with option paper feeder) an ...

  • AGFA 1815 Copier - page 96

    T roubleshooting 7-4 Place original and press Start key. The machine wi ll attempt to make copies from any o riginals that remain uncopied. Reset all of the originals on the original table and try to copy again. — Print overrun This page isn't complete. The data transferred to the machine was too co mplex to print on a page. T o continu e pr ...

  • AGFA 1815 Copier - page 97

    T roubleshooti ng 7-5 Send error. #### An error has occurred during e-mail transmission. The possible error codes and their descriptions are as follows. 1101 : The server name of the SMTP server is not set correctly . Use COMMAND CENTER and regist er the SMTP server name correctly . Refer to Chapter 6 in Advanced Operatio n Guide , Advanced Page . ...

  • AGFA 1815 Copier - page 98

    T roubleshooting 7-6 Paper Jam If a paper jam occurs, a message will be displayed about the jam and copying or printing will stop. Leave the power switch on ( | ) and refer to MP T ray and Inside Machin e on page 7-7 to remove t he jammed paper . Jam Location Indicators Cautions • Do not reuse jammed paper . • If paper is torn during removal, b ...

  • AGFA 1815 Copier - page 99

    T roubleshooti ng 7-7 MP T ray and Inside Machine Note If there are any printouts on the output tray , remo ve them first before performing this procedure. 1 Open the top cover . 2 Open the front cover. 3 T ake the process unit out of the machine. 4 If the leading edg e of the jamm ed paper is visible, pull it out towards you. If the paper is not v ...

  • AGFA 1815 Copier - page 100

    T roubleshooting 7-8 6 Close the front cover . 7 Close the top co ver . Cassette 1 Pull out t he cassette t hat is current ly being u sed. 2 Remove the jammed paper . Note If a paper jam occurs in the optional pa per feeder , the procedure to remove jammed paper is the same as with the included cassette. 3 Push the cassette back in firmly . ...

  • AGFA 1815 Copier - page 101

    T roubleshooti ng 7-9 4 Open and then close the top cover . The misfeed indications will disappear. Face-up T ray 1 Open the rear co ver . 2 Remove the jammed paper . 3 Close the rear cover . Caution The fixing unit is extremely hot. T ake sufficie nt care when working in this area, as there is a danger of getting burned . ...

  • AGFA 1815 Copier - page 102

    T roubleshooting 7-10 4 Open and then close the to p cover . The jam indications will disappear . Optional Document Process or 1 Remove all of the originals remaining on the original table. 2 Open the left cover to th e document processor . 3 Remove the jammed original. If the original is caught in the rollers or difficult to remove at all, proceed ...

  • AGFA 1815 Copier - page 103

    T roubleshooti ng 7-11 5 Remove the jammed original. 6 Close the document pr ocessor . 7 Reset the originals. ...

  • AGFA 1815 Copier - page 104

    T roubleshooting 7-12 ...

  • AGFA 1815 Copier - page 105

    Appendix-1 Appendix Specifications Note S pecifications are subject to change without notice. Main Body Item Specification Printing system Electro-photographic Originals Sheets of p aper , books and 3-dimensional objects Copy sizes Cassette A4, A5, ISO B5, JIS B5, Folio, 16K, 8 1/2 × 14" /Legal, 8 1/2 × 1 1"/Letter , 7 1/4 ×1 0 1/ 2 &q ...

  • AGFA 1815 Copier - page 106

    Appendix Appendix-2 Copying Functions Printing Function s Scanning Func tions Item Specifi cation Copying speed Platen (1:1) 8 1/2 × 1 1"/Lette r/A4: 18 copies/min. A5: 10 copies/min. 8 1/2 × 14"/Lega l: 10 copies/min. Document Processor (1:1) 18 copies/min. (8 1/ 2 × 1 1"/Letter/A4) First copy Approx. 10 sec. (1:1, 8 1/2 × 1 1&q ...

  • AGFA 1815 Copier - page 107

    Appendix Appendix-3 Document Processo r (Option) Paper Feeder (Option) Environment al Specif ications Item Specification Original feed system Automatic feeding Originals Sheets of paper Original sizes Maximum: 8 1/2 × 14"/Legal and Fo lio Minimum: 5 1/2 × 8 1/2 "/St atement and A5R Original paper weight 50 to 120 g/m² Maximum number of ...

  • AGFA 1815 Copier - page 108

    Appendix Appendix-4 ...

  • AGFA 1815 Copier - page 109

    Index Index-1 Index A Application software .......... ................ ................. ................ ................ ................ ............ 4-17 C Canceling copy ... ................. ................ ................ ................ ................ ................ ........... 4-4 Cassette .......... ................ ............... ...

  • AGFA 1815 Copier - page 110

    Index Index-2 M Maintenance ........ ................. ................ ................ ................ ................ ................ .......... 6-1 Maintenance messages ............... ................ ................ ................ ................. ................ ... 7-3 Message display ............... ............. ................ . ...

  • AGFA 1815 Copier - page 111

    Index Index-3 T Text mode .... ................ ................ ................ ................. ................ ................ ................ . 4-2 Text+Photo mode .... ................ ................ ................ ................ ................ ................ ........ 4-2 Time zone ....... ................ ................ ..... ...

  • AGFA 1815 Copier - page 112

    Index Index-4 ...

  • AGFA 1815 Copier - page 113

    Memo ...

  • AGFA 1815 Copier - page 114

    A1 For best print result s and machine perf ormance, we recommend that you use only KYOCERA MIT A original supplies for your KYOCERA MIT A products. ...

  • AGFA 1815 Copier - page 115

    ©2004 is a trademark of Kyocera Corporation ...

  • AGFA 1815 Copier - page 116

    Revision 1.1 2004.6 ...

Manufacturer AGFA Category All in One Printer

Documents that we receive from a manufacturer of a AGFA 1815 Copier can be divided into several groups. They are, among others:
- AGFA technical drawings
- 1815 Copier manuals
- AGFA product data sheets
- information booklets
- or energy labels AGFA 1815 Copier
All of them are important, but the most important information from the point of view of use of the device are in the user manual AGFA 1815 Copier.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AGFA 1815 Copier, service manual, brief instructions and user manuals AGFA 1815 Copier. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AGFA 1815 Copier.

Similar manuals

A complete manual for the device AGFA 1815 Copier, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AGFA 1815 Copier by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AGFA 1815 Copier.

A complete AGFA manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AGFA 1815 Copier - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AGFA 1815 Copier, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AGFA 1815 Copier, that we can find in the current document
3. Tips how to use the basic functions of the device AGFA 1815 Copier - which should help us in our first steps of using AGFA 1815 Copier
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AGFA 1815 Copier
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AGFA 1815 Copier in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AGFA 1815 Copier?

Use the form below

If you did not solve your problem by using a manual AGFA 1815 Copier, ask a question using the form below. If a user had a similar problem with AGFA 1815 Copier it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)