-
Pelco DD53M22-X - page 1
Spectra III ™ SE Series C2443M-D (11/05) OPERA TION/PROGRAMMING ® Models DD53M22 & DD53M22-X ...
-
Pelco DD53M22-X - page 2
...
-
Pelco DD53M22-X - page 3
OPERA TION/PROGRAMMING MANUAL MODELS DD53M22 & DD53M22-X 22X LowLight ™ MONOCHROME TECHNOLOGY ...
-
Pelco DD53M22-X - page 4
4 C2443M-D (11/05) ...
-
Pelco DD53M22-X - page 5
C2443M-D (11/05) 5 CONTENTS WELCOME ................................................................................................................................................................................................ 7 GETTING ST ARTED ...................................................................................................... ...
-
Pelco DD53M22-X - page 6
6 C2443M-D (11/05) PRESETS ......................................................................................................................................................................................... 30 PA TTERNS ............................................................................................................................ ...
-
Pelco DD53M22-X - page 7
C2443M-D (11/05) 7 WELCOME Thank you for purchasing Pelco’ s premier integrated dome system, Spectra III SE. Y our new system features a high resolution, monochrome camera with programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about S ...
-
Pelco DD53M22-X - page 8
8 C2443M-D (11/05) HOW TO OPERA TE YOUR DOME SYSTEM Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far T o zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit . 2. Release the button or joystick for one second ...
-
Pelco DD53M22-X - page 9
C2443M-D (11/05) 9 Accessing Main Menu (Preset 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for var ...
-
Pelco DD53M22-X - page 10
10 C2443M-D (11/05) KBD4000/KBD4002 1. Press the SPOT MONITOR key . 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key . 2. Position the asterisk in the YES row and press the F1 key . The main menu appears. Extended Co ...
-
Pelco DD53M22-X - page 11
C2443M-D (10/05) 11 QUICK ST ART GUIDE – SYSTEM SETUP Quick Programming Guide Access main menu (preset 95). See the Accessing Main Menu (Preset 95) section. Use the joystick* to position the cursor beside menu selection. Press Iris Open, the submenu/cursor moves to the right. Move the joystick up or down to view selections. Press Iris Open to mak ...
-
Pelco DD53M22-X - page 12
...
-
Pelco DD53M22-X - page 13
C2443M-D (11/05) 13 LANGUAGE The language for the on-screen menus is selectable. A vailable languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, T urkish, and Czechoslovakian. The factory default language is English. NOTE: The dome system cannot store all 10 languages in its memory . There are two language packa ...
-
Pelco DD53M22-X - page 14
14 C2443M-D (11/05) SYSTEM INFORMA TION The system Information screen displays dome drive model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only . Use the following steps to display the System Information screen: 1. Use the joystick to posi ...
-
Pelco DD53M22-X - page 15
C2443M-D (11/05) 15 DISPLA Y SETUP Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL: Identifies preset. ZONE LABEL: Identifies zone. ZOOM RA TIO: Identifies the amount of magnification. AZIMUTH 1 /ELEV A TION 2 : Amount of pan from 0 ° and the amount of tilt from 0 ° ho ...
-
Pelco DD53M22-X - page 16
16 C2443M-D (11/05) Label Position Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ALARM 1 ZOOM RA TIO - XXX.XX AZIMUTH 1 /ELEV A TION 2 - XXX ° /-XX ° DIRECTION - NE ALERT MESSAGE 3 * TITLE TEXT ...
-
Pelco DD53M22-X - page 17
C2443M-D (11/05) 17 BACK EXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X176 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> CAMERA <CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <P ATTERNS> <ZONES> <WINDOW BLANKING> <ALARMS> <AUX> <TITLE TEXT> <ALERT> ...
-
Pelco DD53M22-X - page 18
18 C2443M-D (11/05) ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 176X. Cameras with 264X zoom (22X optical zoom and 12X digital zoom) can be set for 22X, 32X, 88X, 176X, 220X, or 264X. ZOOM SPEED Zoom Speed allows the user to define how fast the dome will go from full wide zoom ...
-
Pelco DD53M22-X - page 19
C2443M-D (11/05) 19 BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AUTO AGC LIMIT 27 AUTO IRIS AUTO AUTO IRIS LEVEL 66 AUTO IRIS PEAK 8 AUTO SHARPNESS ON SHARPNESS LEVEL 26 BACKLIGHT COMP OFF VIDEO LEVEL HIGH BACK EXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X176 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> CAMERA Advanced Cam ...
-
Pelco DD53M22-X - page 20
20 C2443M-D (11/05) AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level. OFF Auto iris is disabled, and control is always manual. AUTO (default) The iris is adjusted automatically to produce a consta ...
-
Pelco DD53M22-X - page 21
C2443M-D (11/05) 21 AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode. OFF The sharpness of the picture is set manually by programming the SHARPNESS LEVEL. Sharpne ...
-
Pelco DD53M22-X - page 22
22 C2443M-D (11/05) BACKLIGHT COMPENSA TION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out ...
-
Pelco DD53M22-X - page 23
C2443M-D (11/05) 23 Motion Settings AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick cont ...
-
Pelco DD53M22-X - page 24
24 C2443M-D (11/05) PARK TIME This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. Park Action This feature will define the activity ...
-
Pelco DD53M22-X - page 25
C2443M-D (11/05) 25 SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. PRESET FREEZE FRAME This feature freezes the scene on the monitor when going to a preset. This allows for ...
-
Pelco DD53M22-X - page 26
26 C2443M-D (11/05) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. There are two types of limit stops: MANUAL A manual (joystick) pan operation stops when a limit stop is reached. SCAN The dome reverses direction during random, frame, or auto scan ...
-
Pelco DD53M22-X - page 27
C2443M-D (11/05) 27 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. T o program azimuth zero: 1. Use the joystick to position the cursor beside ...
-
Pelco DD53M22-X - page 28
28 C2443M-D (11/05) Power Up POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE No action. AUTO (default) The dome resumes its prior activity or direction before the power outage. AUTO SCAN Dome starts auto scan ope ...
-
Pelco DD53M22-X - page 29
C2443M-D (11/05) 29 Line Sync Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: Spectra III SE automatically senses V-sync input. No line sync setup is r equir ed for Pelco control systems that provide a V-sync signal. For matrix systems that do not output V-sync, there are two sett ...
-
Pelco DD53M22-X - page 30
30 C2443M-D (11/05) Presets The Spectra III SE dome system has 150 preset positions. Each of the user -definable presets can be programmed to use pan, tilt, camera settings, and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150. The following presets are predefined for specific functions: Preset Action 33 Flip command ...
-
Pelco DD53M22-X - page 31
C2443M-D (11/05) 31 (See page 11) Quick Programming Guide 3. Edit the preset scene: a. Use the joystick to position the cursor beside EDIT PRESET SCENE. b. Press Iris Open. c. Follow the directions displayed on the monitor . 4. Edit preset camera settings: a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS. b. Press Iris Open. T ...
-
Pelco DD53M22-X - page 32
32 C2443M-D (11/05) Patterns A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up). The Spectra III SE can handle up to four user -defined patterns. Pattern length is based upon memory usage rather ...
-
Pelco DD53M22-X - page 33
C2443M-D (11/05) 33 3. Use the joystick to position the cursor beside a character . Press Iris Open to enter selection. T o clear a character , position the cursor beside BACKSP ACE, and then press Iris Open. 4. When the label is completed, move the cursor the OK. Press Iris Open to return to the Zones menu. T o disable a zone (a zone is enabled au ...
-
Pelco DD53M22-X - page 34
34 C2443M-D (11/05) Window Blanking Window blanking allows a user to program up to eight, four -sided, user -defined areas that cannot be viewed by the operator of the dome system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide. Spectra III SE has two style modes for window ...
-
Pelco DD53M22-X - page 35
C2443M-D (11/05) 35 Window Blanking Disabled Window Blanking Enabled (See page 11) Quick Programming Guide 6. The blanked area can be programmed to turn on or off at a specified zoom point. T o set the zoom point: a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then pres Iris Open. b. Zoom in to the point where you want wind ...
-
Pelco DD53M22-X - page 36
36 C2443M-D (11/05) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have been set for window blanking are cleared. BLANK ALL ...
-
Pelco DD53M22-X - page 37
C2443M-D (11/05) 37 Alarms The Spectra III SE dome has seven alarm inputs, which can be programmed as high, medium or low priority . When an alarm is received, an input signal to the dome triggers the user -defined action (go to preset, run pattern, etc.) programmed for the alarm. There are three global alarm settings: RESUME This mode lets the dom ...
-
Pelco DD53M22-X - page 38
38 C2443M-D (11/05) 3. Select the alarm priority: a. Use the joystick to position the cursor beside ALARM PRIORITY . b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active ...
-
Pelco DD53M22-X - page 39
C2443M-D (11/05) 39 5. Set the auxiliary to activate: a. Use the joystick to position the cursor beside ACTIV A TE AUX. b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the following available selections. NO (default) Not activated. 1 An alarm action will close AUX 1. 2 An alarm action will close AUX 2. d. ...
-
Pelco DD53M22-X - page 40
40 C2443M-D (11/05) Aux An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller . An AUX 1 command from the controller will activate the relay in the dome and operate the device that is connected to the relay . T ...
-
Pelco DD53M22-X - page 41
C2443M-D (11/05) 41 T itle T ext T itle text is the label used to identify the camera viewed on the monitor . Up to 20 characters can be used for a title. T o edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT . 2. Press Iris Open. The following appears on the monitor: EXIT SPECTRA III LAN ...
-
Pelco DD53M22-X - page 42
42 C2443M-D (11/05) Alert NOTE: The Alert section only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher . Spectra III SE systems that are not pressurized or pressurized systems that do not have dome drive software version 1.25 or higher will not display this menu item. Software version 1.25 or higher includes ...
-
Pelco DD53M22-X - page 43
C2443M-D (11/05) 43 (See page 11) Quick Programming Guide ACK ACTION Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION: AL W AYS ON The alert label is displayed until alert conditions are cleared. OFF 8 HRS The alert label is turned off for 8 hou ...
-
Pelco DD53M22-X - page 44
44 C2443M-D (11/05) Clear Use this setting to clear user -defined settings or return the dome to factory default settings. The following are the available CLEAR settings: ALL ZONES Clears all zones. T o clear a single zone, refer to the Zones section. ALL PRESETS Clears all presets. T o clear a single preset, refer to the Presets section. ALL P A T ...
-
Pelco DD53M22-X - page 45
C2443M-D (11/05) 45 (See page 11) Quick Programming Guide BACK EXIT ENABLE P ASSWORD OFF <EDIT P ASSWORD> P ASSWORD <CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <P A TTERNS> <ZONES> <WINDOW BLANKING> <ALARMS> <AUX> <TITLE TEXT> <ALERT>* <CLEAR> <P ASSWORD&g ...
-
Pelco DD53M22-X - page 46
46 C2443M-D (11/05) LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT SPECTRA III * This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher . RESET , CYCLE POWER, REBOOT RESET CAMERA Use this functi ...
-
Pelco DD53M22-X - page 47
C2443M-D (11/05) 47 SOFTW ARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’ s remote monitor kit (IPS-RMK), remote data port b ...
-
Pelco DD53M22-X - page 48
48 C2443M-D (11/05) SPECIFICA TIONS DD53M22 Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch CCD Effective Pixels 768 (H) X 494 (V) Horizontal Resolution >500 TV lines Lens F1.6 (f=4~88 mm optical, 22X optical zoom, 12X digital zoom) Zoom Speed (optical range) 2.4/3.9/6.3 seconds Horizontal Angle of View 47 ° at 4 mm wide ...
-
Pelco DD53M22-X - page 49
C2443M-D (11/05) 49 ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 2005, Pelco. ™ Spectra III, PelcoNet, and LowLight are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C2443M 2/02 Original version. C2443M-A 11/02 Revised Quick Start Guide. C2443M-B 2/03 Manual revised to include fe ...
-
Pelco DD53M22-X - page 50
...
-
Pelco DD53M22-X - page 51
...
-
Pelco DD53M22-X - page 52
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ® ...
Do you have a question concerning Pelco DD53M22-X?
Use the form below
If you did not solve your problem by using a manual Pelco DD53M22-X, ask a question using the form below. If a user had a similar problem with Pelco DD53M22-X it is likely that he will want to share the way to solve it.