English dropdown-ico

Manual Smeg CIR34AX3

24 pages 1.75 mb
Download

Go to site of 24

Summary
  • Smeg CIR34AX3 - page 1

    Contents 3 1 INSTRUCTIONS FOR SAFE AND PROPER USE _____________________ 4 2 POSITIONING OF THE HOB _____________________________________ 6 3 GAS CONNE CTION ___________________________________________ 11 4 ELECTRICAL CONNECTION ____________________________________ 12 5 ADAPTATION TO DIFFERENT TYPES OF GAS _____________________ 13 6 FINAL OPERATIONS ...

  • Smeg CIR34AX3 - page 2

    Introduction 4 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WH OLE WORKING LIFE OF THE COOKING HOB. WE ADVISE R EADING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEF ORE USING THE COOKING HOB. ALSO KEEP THE SERIES OF NOZZLES SU ...

  • Smeg CIR34AX3 - page 3

    Introduction 5 THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASING MUST NOT BE REMOVED. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER THE CASING. DO NOT PUT PANS WITHOUT PERFECTLY SMO ...

  • Smeg CIR34AX3 - page 4

    Instructions for the installer 6 2 POSITIONING OF THE HOB It is the law that all gas a ppliances are installed by authorised persons . Clearance aro und the appliance must comply with the requirem ents of AS5601. The following operati on requires build ing and/or carpentry work so m ust be carried out by a competent tradesman. Installation can be c ...

  • Smeg CIR34AX3 - page 5

    Instructions for the installer 7 Bracket ‘ A ’ in the 1st slot Bracket ‘ A ’ in the 2nd slot Bracket ‘ B ’ Short sides Long sides 2.2 Fixing 90 cm hobs on 60 cm base unit If a 90 cm hob is to be bracketed to a 60 cm base unit, the 2 central brackets “ A ” have to be used in ad dition to the side brackets “ B ” as shown in the dr ...

  • Smeg CIR34AX3 - page 6

    Instructions for the installer 8 Overall dimensions: location of gas and electrical connection points (all measures in mm). 60 cm 90 cm hob hob A 35 105 B 65 50 C 30 50 D 85 75 2.3 Clearance above and around domestic appliances Extract from AS5601 ...

  • Smeg CIR34AX3 - page 7

    Instructions for the installer 9 REQUIREMENTS 1 Overhead clearances – (Measurement A ) Range hoods and exha ust fans shall be installed in accordance with the manufacturer’s instructions. However, in no case shall the clearance between the highest part of the hob of the cooking appliance and a range hood be less than 600 mm or, for an overhead ...

  • Smeg CIR34AX3 - page 8

    Instructions for the installer 10 3 For definition of hob, see Claus e 1.4.64. 4 For definition of triv et, see Clause 1.4.109. 5 Consideration is to be given to windo w treatments when located near cooking appli ances. See Clause 5.3.4. 2.4 Room ventilation Caution – This hob may only be installed and operated in rooms permanently ventilated in ...

  • Smeg CIR34AX3 - page 9

    Instructions for the installer 11 3 GAS CONNECTION This appliance is suitable for installation with Natur al Gas or ULPG (propane). Refer to page 12 for the relevant burner pressure an d appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator su pplied must be fitted to the gas inlet. A test poin ...

  • Smeg CIR34AX3 - page 10

    Instructions for the installer 12 4 ELECTRICAL CONNECTION Make sure that the voltage and cap acity of the power line conform to the data shown on the plate l ocated under the casing. Do not remove this plate for any reason. The plug o n the end of the supply cable and the wall soc ket must be the same type and conform to the curr ent electrical sys ...

  • Smeg CIR34AX3 - page 11

    Instructions for the installer 13 5 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the appliance from the electrical socket. The hob has been adjusted for natural gas at a pressure of 1.0 kPa. For functioning with other types of gas the nozzles must be replaced and the primary air adjusted. To replac ...

  • Smeg CIR34AX3 - page 12

    Instructions for the installer 14 5.2 Removing the hob (models wi th built-in control panel) 1. Remove the knobs, the gri ddles, the burner caps, the flam e caps and the two rear plugs; 2. Remove the screws “A” which fix the burner supports; 3. Raise the hob, sliding it off the ignition plugs and/or the thermocouples and the gas tap rods; 5.3 A ...

  • Smeg CIR34AX3 - page 13

    Instructions for the installer 15 5.4 Adjustment for natural gas The hob has been adjusted for natural gas at a pressure of 1.0kPa. To allow the unit to work back with this type of gas, after it has been adjusted for ULPG, perform the same operations described in paragraph “5.3 Adjustment for ULPG”, but r efer to the following table for the pro ...

  • Smeg CIR34AX3 - page 14

    Instructions for the installer 16 6 FINAL OPERATIONS Having carried out the above adjustments, reassemble the ap pliance following, backwards, the instructions i n paragraph “ 5.1 Removing the control panel / 5.2 Removing the ho b”. 6.1 Adjustment of minimum for natural gas Light the burner and take it to the minimum . Remove the gas tap knob a ...

  • Smeg CIR34AX3 - page 15

    Instructions for the installer 17 6.2 Arrangement of burners on the hob (hobs with separable control panel). 60 cm hobs BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid large 5. Wok 90 cm hobs BURNERS 1. Auxiliary 2. Semirapid 3. Rapid 4. Fish burner 5. Wok ...

  • Smeg CIR34AX3 - page 16

    Instructions for the installer 18 6.3 Arrangement of burners on the hob (hobs with b uilt- in control panel). 60 cm hobs BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid 5. Wok 6.4 Lubrication of gas taps With time it may happen that the gas taps get blocked and h ard to turn. Clean them inside and r e-grease them. This operation must be ...

  • Smeg CIR34AX3 - page 17

    Instructions for the user 19 7 USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitted cor rectly. In the wok burner, notch A must be aligned with pin B . Grid C provided is intended for use with wok s (Chinese pans). Adapter D comes only with o pen grids models and is intended for us e with sma ...

  • Smeg CIR34AX3 - page 18

    Instructions for the user 20 7.3 Diameter of containers Burners Ø min. and max . (en cm.) Auxiliary 12-14 Semirapid 16-20 Rapid 22-26 Rapid large 22-26 Wok 22-34 Fish burner Special oval-shaped vessels 7.4 Electric elements 7.4.1 Turning on electric elements Hobs may be fitted with an electric element of various diameter. The electric elem ent is ...

  • Smeg CIR34AX3 - page 19

    Instructions for the user 21 WARNING When switching on the electric element for the first time, or if the electric element has not been used for a long time, to remove any humi dity from the insulating material it should be dr ied out by placing the electric ele ment on position 1 for 30 minutes. To use correctly remember to: • Switch the electri ...

  • Smeg CIR34AX3 - page 20

    Instructions for the user 22 8 CLEANING AND MAINTENANCE Before any intervention, disc onnect the power supply of the device. 8.1 Cleaning Clean the cooking top regul arly every time you use it, obviously after it has cooled. 8.1.1 Regular daily cleaning of the hob In order to clean an d preserve the surface, a lways use specific products only, whic ...

  • Smeg CIR34AX3 - page 21

    Instructions for the user 23 8.2.2 The electric element After use, to make sure that the surf aces are clean and lon g lasting, the electric element must be treated w ith specific cleaning pro ducts which are available on the market. This necessary operation pr events oxidisation (rust formation). 8.2.3 The cover Clean the glass or steel cover, whe ...

  • Smeg CIR34AX3 - page 22

    Instructions for the user 24 9 PROBLEMS AND CAUSES Each of the following cases is caused by an abnormal operation of the appliance and shoul d be dealt with by a authorised pers ons: please contact your local dealer or Service Center in case yo u detect any of these malfunctioning. PROBLEM CAUSE WHAT TO DO The flame is very lo ng with bright yellow ...

  • Smeg CIR34AX3 - page 23

    ...

  • Smeg CIR34AX3 - page 24

    914773237/ B ...

Manufacturer Smeg Category Cooktop

Documents that we receive from a manufacturer of a Smeg CIR34AX3 can be divided into several groups. They are, among others:
- Smeg technical drawings
- CIR34AX3 manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg CIR34AX3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg CIR34AX3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg CIR34AX3, service manual, brief instructions and user manuals Smeg CIR34AX3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg CIR34AX3.

Similar manuals

A complete manual for the device Smeg CIR34AX3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg CIR34AX3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg CIR34AX3.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg CIR34AX3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg CIR34AX3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg CIR34AX3, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg CIR34AX3 - which should help us in our first steps of using Smeg CIR34AX3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg CIR34AX3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg CIR34AX3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg CIR34AX3?

Use the form below

If you did not solve your problem by using a manual Smeg CIR34AX3, ask a question using the form below. If a user had a similar problem with Smeg CIR34AX3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)