English dropdown-ico

Manual Bolens 52068 - 5HP

24 pages 1.22 mb
Download

Go to site of 24

Summary
  • Bolens 52068 - 5HP - page 1

    Model 52068 - 5HP Recoil Start 52069 - 6HP Electric Start OWNER’S MANUAL T rimmer/Mower • Safety • Assembly • Controls • Operation • Maintenance • Parts List GARDEN WAY INCORPORATED SAFETY FIRST! Before operating this equipment, read this Owner's Manual and the separate manual supplied by the engine manufacturer . (Electric Start ...

  • Bolens 52068 - 5HP - page 2

    Dear Owner: You now own one of the finest trimmer/mowers available. It was designed to easily handle a wide variety of trimming, mowing and clearing chores. You will find the machine to be an invaluable tool in caring for your property. Please carefully read this Manual. It tells you how to safely and easily assemble, operate and maintain your mach ...

  • Bolens 52068 - 5HP - page 3

    Safety 1 Section 1 Figure 1-1 - Electric start model shown. Trimmer Head Control Bail Cutting Height Settings Engine Throttle Control Lever Handlebar Height Adjuster Keyswitch (Electric Start Model) GENERAL OPERA TION 1. Read, understand, and follow all instructions on the machine and in the manuals. Be thoroughly familiar with the controls and the ...

  • Bolens 52068 - 5HP - page 4

    2 Section 1: Safety 20. Always wear approved safety gog- gles or safety glasses with side shields when operating equipment. The use of any powered machine can result in for- eign objects being thrown by high-speed rotating parts which can cause personal injury or property damage. Stay away from glass and other easily thrown or breakable objects. 21 ...

  • Bolens 52068 - 5HP - page 5

    Section 1: Safety 3 SAFETY DECALS For your safety and the safety of others, various safety and operational decals are located on your unit (see below). Keep the decals clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing. Refer to the Parts List in this manual for dec ...

  • Bolens 52068 - 5HP - page 6

    Assembly 2 Section 4 INTRODUCTION Carefully follow these assembly steps to correctly prepare your machine for use. It is recommended that you read this Section in its entirety before beginning assembly. NOTE: If an assembly step applies only to certain models, those models are noted at the beginning of that step. Otherwise, a step applies to all mo ...

  • Bolens 52068 - 5HP - page 7

    Section 2: Assembly 5 5. Use two cable ties (F, Figure 2-2) to secure the trimmer head control cable (C) and the electrical wiring harness (O) to the handlebar at the locations shown. STEP 3: A TT ACH THROTTLE CONTROL LEVER 1 . One end of the Throttle Control Cable (H, Figure 2-3) is attached to the engine. Gently unwind the cable from its shipping ...

  • Bolens 52068 - 5HP - page 8

    6 Section 2: Assembly STEP 6: CONNECT AND CHARGE BA TTERY (ELECTRIC ST ART MODELS) 1 . Lift and tilt debris shield (X, Figure 2- 5) forward to view battery (P). Connect the red wire (R, Figure 2-6) to the positive (+) red-coded terminal on the battery. Then, connect the black wire (S) to the negative ( – ) black-coded terminal on the battery. Clo ...

  • Bolens 52068 - 5HP - page 9

    Features and Controls 3 Section 7 OPERA TING SYMBOLS Various symbols (shown here, with word descriptions) are used on the unit. STOP FEA TURES AND CONTROLS This Section describes the location and function of the features and controls on your machine. Refer to the following Operation Section for detailed operating instructions. Do not start the engi ...

  • Bolens 52068 - 5HP - page 10

    Operation 4 Section 8 INTRODUCTION Read this Section thoroughly before you start the engine. As with any piece of outdoor power equipment, getting the “ feel ” for how your machine operates and knowing the best techniques for partic- ular jobs are important to overall good performance. NOTE: All references to LEFT, RIGHT, FRONT and REAR of the ...

  • Bolens 52068 - 5HP - page 11

    Section 4: Operation 9 USE THE CORRECT DIAMETER TRIMMER LINE Before starting a project, examine the grass or material you will be cutting and trimming. For tougher conditions, use two (or four) sections of the thicker gauge, .155" diam- eter extra-heavy duty line. For less demanding conditions, use two sections of the thinner gauge, .130" ...

  • Bolens 52068 - 5HP - page 12

    10 Section 4: Operation ADDITIONAL OPERA TING TIPS AND TECHNIQUES TIPS FOR PRECISION CUTTING For the most precise cutting possible, be sure to select the appropriate line cutting height and trimmer line size (thickness) for the conditions at hand. When mowing, let the cutting head rest lightly on the ground and do not lift up on the handlebars. Thi ...

  • Bolens 52068 - 5HP - page 13

    Maintenance 5 Section 11 ADJUSTING TRIMMER HEAD ENGAGEMENT The tension on the drive belt must be correct for proper operation of the trimmer head. If the tension is correct, the trimmer head will rotate when the Trimmer Head Control Bail is pulled back against the handlebar (another indication of correct tension is if the engine stalls when the tri ...

  • Bolens 52068 - 5HP - page 14

    12 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING REMOVING AND REPLACING THE TRIMME ...

  • Bolens 52068 - 5HP - page 15

    Section 5: Maintenance 13 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING 11. Using a 9/16" wrench and ...

  • Bolens 52068 - 5HP - page 16

    14 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING TRIMMER/MOWER CLEANING AND DEBRIS ...

  • Bolens 52068 - 5HP - page 17

    Section 5: Maintenance 15 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING Throttle Control Adjustment – I ...

  • Bolens 52068 - 5HP - page 18

    16 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING CHANGING TRIMMER LINES The trimme ...

  • Bolens 52068 - 5HP - page 19

    Section 5: Maintenance 17 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING PROBLEM POSSIBLE CAUSE CORRECTION ...

  • Bolens 52068 - 5HP - page 20

    18 Parts List Models 52068 & 52069 DRA WING NO. 1 1 2 3 4 5 5 5 5 5 5 7 8 9 10 11 12 13 26 17 17 17 16 20 21 22 23 24 25 15 18 19 14 14 6 6 ...

  • Bolens 52068 - 5HP - page 21

    Parts List 19 Models 52068 & 52069 1 1917765 Debris Guard ............................................ 1 2 1918741 Decal-Logo .............................................. 1 3 1918415 Push-in Fastener ....................................... 5 4 1917407001 Debris Guard Support ............................... 1 5 1754128 Hex Flange Screw, 1/4-20 ...

  • Bolens 52068 - 5HP - page 22

    20 Parts List Models 52068 & 52069 DRA WING NO. 2 See DRAWING NO. 1 See DRAWING NO. 3 See ACCESSORIES AND KITS 2 2 1 1 3 3 4 7 8 9 10 11 12 13 14 15 16 27 17 18 22 23 24 25 26 18 18 19 20 21 6 1 1917778 Wheel/Tire Assembly .............................. 2 2 1917593 Locking Retaining Ring .......................... 2 3 1917775 Flat Washer ...... ...

  • Bolens 52068 - 5HP - page 23

    Parts List 21 Models 52068 & 52069 DRA WING NO. 3 1 4 5 2 3 6 6 8 7 9 12 13 13 13 14 15 16 14 10 11 1 1918283 Upper Handlebar (Incl. Refs. 2 & 3) ....... 1 2 1915889 Decal – Bail Engage/Disengage ................ 1 3 1918304 Decal – Throttle ....................................... 1 4 1918070001 Control Bail – Trimmer Head ........... ...

  • Bolens 52068 - 5HP - page 24

    1905587 (2/01) Printed in U.S.A. © 2001 Garden Way Incorporated CUSTOMER SERVICE INFORMA TION Owner Registration Card Please fill out and mail the enclosed owner registration card. The purpose of this card is to register each unit at the factory so that we can provide you with warranty benefits and informational bulletins. Warranty Service The war ...

Manufacturer Bolens Category Trimmer

Documents that we receive from a manufacturer of a Bolens 52068 - 5HP can be divided into several groups. They are, among others:
- Bolens technical drawings
- 52068 - 5HP manuals
- Bolens product data sheets
- information booklets
- or energy labels Bolens 52068 - 5HP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bolens 52068 - 5HP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bolens 52068 - 5HP, service manual, brief instructions and user manuals Bolens 52068 - 5HP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bolens 52068 - 5HP.

Similar manuals

A complete manual for the device Bolens 52068 - 5HP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bolens 52068 - 5HP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bolens 52068 - 5HP.

A complete Bolens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bolens 52068 - 5HP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bolens 52068 - 5HP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bolens 52068 - 5HP, that we can find in the current document
3. Tips how to use the basic functions of the device Bolens 52068 - 5HP - which should help us in our first steps of using Bolens 52068 - 5HP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bolens 52068 - 5HP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bolens 52068 - 5HP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bolens 52068 - 5HP?

Use the form below

If you did not solve your problem by using a manual Bolens 52068 - 5HP, ask a question using the form below. If a user had a similar problem with Bolens 52068 - 5HP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)