-
Casio QV-700 - page 1
LCD Digital Camera QV-700 Owner’s Manual 英 2 Contents Introduction Congratulations upon your selection of the QV-700 LCD Digital Cam- era. The QV-700 comes with its own built-in liquid crystal color moni- tor that let’s you instantly view the pictures you take. To get the most out of the QV-700, be sure to carefully read this manual and follo ...
-
Casio QV-700 - page 2
5 Precautions General Precautions Be sure to observe the following important precautions whenever us- ing the QV-700. All references in this manual to “this camera” and “the camera” refer to the CASIO QV-700 Digital Camera. • Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so ...
-
Casio QV-700 - page 3
9 Precautions GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfe ...
-
Casio QV-700 - page 4
13 Bottom Tripod hole Battery compartment cover BRIGHT (brightness) control • BRIGHT control adjusts the brightness of the image on the LCD. The brightness is set at the factory to the optimum setting, and nor- mally does not need adjustment. Battery compartment lock Normal Recording ....... For normal photography (page 31) Repeat Recording ..... ...
-
Casio QV-700 - page 5
17 1 .2 . 3 . 4 . 5 . Eject button Note To ensure proper performance, be sure to use only CASIO brand memory cards: CF-2V (2MB), CF-4V (4MB), CF-10V (10MB), or CF- 15V (15MB). Important! • Insert only memory cards into the memory card slot. Inserting any other type of card can cause malfunction. • Should water or any other foreign matter get in ...
-
Casio QV-700 - page 6
21 CAMER001.CAM CAMER002.CAM CAMER003.CAM CAMER004.CAM CAMER005.CAM BUSIN001.CAM BUSIN002.CAM BUSIN003.CAM CAMERA BUSINESS Renamed Renamed Move Appended to end Inserted CAMER001.CAM CAMER002.CAM CAMER003.CAM CAMER004.CAM CAMER005.CAM CAMER001.CAM CAMER002.CAM CAMER003.CAM CAMER004.CAM CAMER005.CAM CAMER006.CAM CAMERA CAMERA Renamed Shifted down Tit ...
-
Casio QV-700 - page 7
25 ON/OFF DEL POWER Low Battery Indicator The low battery indicator ( ) appears in the center of the LCD whenever batteries are about to go dead. It tells you that power will soon turn off automatically if you continue using the camera without replacing batteries. Be sure to replace all four batteries with a fresh set of new ones. Auto Power Off Po ...
-
Casio QV-700 - page 8
29 4. Use [+] and [–] to select ADJUST, and then press the shut- ter button. 5. Set the current date and time. • Use [+] and [–] to select the setting that is highlighted on the monitor screen, and then press the shutter button to advance to the next setting. Repeat this for all of the settings on the monitor screen. 6. After making all the s ...
-
Casio QV-700 - page 9
33 Recording Images How to avoid hand movement… Any hand movement when you press the shutter button can causes blurring of the recorded image. Note the following points on avoiding hand movement. • Make sure there is no excessive movement of the image of the ob- ject on the LCD. Fluorescent Lighting Fluorescent lighting actually flickers at a f ...
-
Casio QV-700 - page 10
37 Recording Images Exposure Adjustment This camera features an program AE function that automatically changes shutter speed and aperture in accordance with available light. In addition, you can also manually adjust the exposure to com- pensate for backlighting, indirect indoor lighting, dark backgrounds, and other special conditions. To manually a ...
-
Casio QV-700 - page 11
41 Recording Images Using the Flash You can use the camera’s built in flash when recording images. To change the flash mode Press button to cycle through flash modes in the following sequence: Auto Flash Flash On Flash Off. Auto Flash ....... Ca m era automatically decides whether or not to fire the flash in accordance with exposure conditions. F ...
-
Casio QV-700 - page 12
45 Recording Images 4. Use [+] and [–] to select the type of self-timer recording you want to perform, and then press the shutter button. 5. Point the camera at the subject and press the shutter but- ton. Note During self-timer recording, you may find it helpful to rotate the swivel lens mechanism 180 degrees so the monitor screen faces the same ...
-
Casio QV-700 - page 13
49 Recording Images Manual Recording With manual recording, you can set the aperture and white balance manually to produce exactly the effect you want. To record an image manually 1. Slide the function switch to the REC position. 2. Align the dial to for normal recording. 3. Press MENU. • APT (Aperture Priority) You can specify AUTO, F2, or F8 fo ...
-
Casio QV-700 - page 14
53 Playing Back Images Producing a Multi-Page Display Four or nine memory pages can be displayed at the same time. This feature can be used to display multiple memory pages on the cam- era's built-in LCD, or on the screen of a connected TV. Multi-Page Display 1. Slide the function switch to the PLAY position. 2. Press the MENU button. 3. Speci ...
-
Casio QV-700 - page 15
57 Playing Back Images Notes • If the page number is displayed in the upper right corner of the screen when you perform a zoom operation, the number is replaced by a zoom area indicator ( ). This indicator shows you what part of the image is currently enlarged on the display. You can turn the zoom area indicator on and off by pressing the DISP bu ...
-
Casio QV-700 - page 16
61 Playing Back Images Rotating an Image Use the following procedure to rotate an image in 90 ° increments. To rotate an image 1. Slide the function switch to the PLAY position. 2. Use the [+] and [–] buttons to scroll through the images in memory until the one you want to rotate is on the monitor screen. 3. Press the MENU button. 4. Use the [+] ...
-
Casio QV-700 - page 17
65 Playing Back Images 6. Use [+] and [–] to select the locations you want to use, and then press the shutter button. • You can move the image vertically and horizontally. 7. Use [+] and [–] to select the background you want to use, and then press the shutter button. • If you select the vertical ellipse and small circle, you also need to pe ...
-
Casio QV-700 - page 18
69 Playing Back Images 3. Use [+] and [–] to select FOLDER, and then press the shut- ter button. • FOLDER is located in MENU 3. 4. Use [+] and [–] to select SELECT, and then press the shutter button. 5. Use [+] and [–] to select the folder you want, and then press the shutter button. To move an image from one folder to another Important! Ma ...
-
Casio QV-700 - page 19
73 Playing Back Images 4. Use [+] and [–] to select ALL, and then press the shutter button. • Now when the playback mode displays are turned on, the indicator is shown in the upper left of all images that are pro- tected. Unprotecting Images You can unprotect a single image, all the images in a particular folder, or all images currently stored ...
-
Casio QV-700 - page 20
77 Deleting Memory Pages 12 3 4 12 3 Deleting All the Images in a Folder Use the following procedure to delete all the images in a particular folder. Note that any images in the folder that are protected against deletion are not deleted by this procedure. To delete all images in a folder 1. Slide the function switch to the PLAY position. 2. Press D ...
-
Casio QV-700 - page 21
81 Using the Camera with a Connected Device The camera terminals The following describes which the camera terminal you should use for each type of connection. VIDEO OUT – Use this terminal when connecting to the VIDEO IN terminal of a TV, video tape deck, video printer, or other similar devices. Use the special video cable that comes with the cam ...
-
Casio QV-700 - page 22
85 Using the Camera with a Connected Device Connecting to another CASIO Digital Camera DIGITAL You can connect the camera to another CASIO digital camera and exchange image data between them. Connect the DIGITAL terminals of the two cameras using the optionally available SB-62 connecting cable. To connect the two cameras 1. Turn both cameras off. 2 ...
-
Casio QV-700 - page 23
89 Using the Camera with a Connected Device Computer (Video Capture) VIDEO You can use the special video cable that comes with the camera to connect directly to the VIDEO IN terminal of a personal computer equipped with video capture capabilities. To transfer camera images to a personal computer (video capture) 1. Use the special video cable that c ...
-
Casio QV-700 - page 24
93 Symptom Probable Cause Action 1. Connect correctly us- ing the special video cable that comes with the camera (page 83). 2 . Set up the TV cor- rectly. 1 . Unhide protected memory pages by holding down [–] while turning power on (page 74). 2. Check other folders for images Check other folders for images Unhide protected memo- ry pages by holdi ...
-
Casio QV-700 - page 25
97 Problem with internal memory. Contact your dealer or an authorized CASIO service provider. Not enough memory for recording in current resolution mode. Press t o change to another resolution mode, delete some images from memory, or change resolution of stored images from FINE to NORMAL or NORMAL to ECONOMY. Not enough memory for further recording ...
Do you have a question concerning Casio QV-700?
Use the form below
If you did not solve your problem by using a manual Casio QV-700, ask a question using the form below. If a user had a similar problem with Casio QV-700 it is likely that he will want to share the way to solve it.