-
Maxtor QSNDVR9M - page 1
User ’ s manual for MPEG4 DVR Model QSNDVR9M and QSNDVR16M *This manual is for MPEG4 QSNDVR9M 9-channel and Q S ND V R 1 6 M 16-channel digital video recorder And us es t he 16-channel digital video recorder as example. Before operation, we strongly advise that you read th e user manual and keep it a va il a bl e for future use. This manual is an ...
-
Maxtor QSNDVR9M - page 2
T able of Content s Digi tal Video Recorder (DVR) Introducti on ................. .................. ........... ...... ................ ................. ..... ........ ... 4 1.1 Product introduction ........ ... ............... ................ ............. . ............... ............... ................ .................... 4 1.2 Features of ...
-
Maxtor QSNDVR9M - page 3
3.2.1 SETUP-SYSTEM .... ........ .............................................. .......................... ........................ ...... 34 3.2.2 SET UP-LIVE ................... ..................... .................. .................. ..................... ............. ...... ..... 39 3.2.3 SETUP-REC .... ..................... ... ........... ...
-
Maxtor QSNDVR9M - page 4
Digit al Video Recorder (DVR) Introduction 1.1 Product introduction This DVR is designed specially for CCTV syste m. It uses a n embedde d processor and embedded operating system working wi th t he high-powered c ode and decode chip. In addition, it uses advanced IT technology t o make the system more st able, such as the audio code and decode tech ...
-
Maxtor QSNDVR9M - page 5
Format S tandard MPEG-4 compression format Sto r ag e Supports up to four IDE Hard Drives simult aneou sly (Or three IDE HDDs and one IDE DVD-RW/CD-RW) Backup Auto-play software automatically pa cked in backup f iles, and Auto-water-mark check in backup files to assure files’ authenticity Support back up via USB 2.0 to USB flash memory , or CDRW ...
-
Maxtor QSNDVR9M - page 6
Alarm 9/16 alarm inputs and 4 alarm outputs, TTL alarm output PTZ control Supports decoder which communicates with RS485 Supports speed dome Supports PTZ through net work Communication port RS 485 equipped Netw ork Supports TCP/IP protocol Supports wide bandwidth netwo rk through modem (PPPOE) Supports static IP and dynamic IP (DHCP) Real time prev ...
-
Maxtor QSNDVR9M - page 7
Installation Notice Attention : Before connec ting to other equipment, pl ease make sure the device is powered off. Do not hot plug in! 2.1 Checking the contents Check t he contents when you receive the unit, to make sure you have all the part s. Normally it will contain: a remote control, a power c able, a CD-Rom wi th “Net Client” software, s ...
-
Maxtor QSNDVR9M - page 8
2.2.2 Inst all tool One Phillips screwdriver 2.2.3 Inst all process Open the DVR using screwdriver Set one HDD as master an d the other as slave if tw o HDDs are connected to one A T A interface!!! Attention : Hard Dri ve s connected to the sam e p arallel cable can not be set as master+master or slave+slave, they must be master+slave! !! HDD setup ...
-
Maxtor QSNDVR9M - page 9
...
-
Maxtor QSNDVR9M - page 10
J u m p er area The picture blow is the IDE connection/ Power connection section of the HDD. Jumper according to the diagram above Jump er area MASTER SLA VE The sequence of read/ write data from HDD The A T A interface which is near the motherb oard center is the secondary interface, the next A T A interface which is near the motherboard edge is t ...
-
Maxtor QSNDVR9M - page 11
Primary A T A interface is HDD A, the slave is HDD B. The master HDD conn ected to secondary A T A inter face is HDD C, the slave is HDD D. The record sequence is: HDD A → HDD B → HDD C → HDD D Overwrite sequence: The sequence is irrespective of HDD. The DVR o verwr ites HDD from the oldest record file when HDD is full. Motherboard Operation ...
-
Maxtor QSNDVR9M - page 12
19 pins are in the other row). Make sure pins are plugged into interface correctly. Connect the power supply to HDD Sketch map of installa tion Close the device cover and lock it w ith screws Attention : Pleas e format the HDD before u sing. If the user w a nts to connect the CD/DVD driver to the A T A interface, please choose the secondary interfa ...
-
Maxtor QSNDVR9M - page 13
1 2 Fir st, pu t the HDD into the HDD fixati on rack Second, attach the HDD by t w o scre w s on bo th sid es 3 4 Third, connect th e HDD cable Fourth, connec t the pow er supply to HDD Sketch of installation P age 15 x ...
-
Maxtor QSNDVR9M - page 14
- 2.3 Back p anel and interface terminals Attention : The real connections on the back p anel might be slightly different from the sketch below. 2.3.1 Back panel of 16-channel DVR CAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 AUDIO IN 1 AUDIO IN 2 ALAR M IN ALARM OUT 1 2 3 4 5 6 7 8 1 2 3 4 CAM9 CAM10 CAM1 1 CAM 12 CAM13 CAM1 4 CAM15 CAM16 SPOT OUT VIDEO ...
-
Maxtor QSNDVR9M - page 15
1 Video input 1-16 2 S pot output 3 Video output 4 S video output 5 Audio output Page 17 ...
-
Maxtor QSNDVR9M - page 16
6 LAN port 7 Audio in 1-4 8 Alarm input1-16 9 Alarm output Page 18 ...
-
Maxtor QSNDVR9M - page 17
10 Fan vent 1 1 Power plug 12 USB port 13 VGA port 14 RS 232 port Null 15 RS485 port Page 19 ...
-
Maxtor QSNDVR9M - page 18
2.3.2 Back panel of 9-channel DVR CA M 1 CA M 5 CAM 7 A U D I O I N 1 A U D I O I N 2 ALA RM IN ALARM OUT CAM 3 CAM 9 1 2 3 4 5 6 7 8 9 1 2 3 4 CAM 2 CA M 4 CA M 6 CAM 8 A U D I O I N 3 AUDI O IN 4 S P O T O U T VI DEO OU T S VID E O A UD I O OU T COM + - GND RS- 4 85 LAN USB VG A RS- 2 32 Back panel of 9-channel DVR The difference between 9- chann ...
-
Maxtor QSNDVR9M - page 19
0 MODE B ACK U P 2.4 Front p anel and interface terminals Attention : The actual buttons on the front p anel please might be slightly dif ference from this sketch. 1 11 1 2 3 P T 14 13 15 28 26 27 LED 4 5 6 Z/F 12 16 Power 7 8 9 AUDI O 7 23 17 REC SEAR CH PLA Y REV FF STO P MENU FUNCTION INFO R USB 21 22 25 2 4 5 6 8 9 10 18 19 20 24 N um b e r Num ...
-
Maxtor QSNDVR9M - page 20
7 Zoom/Focus control 8 Audio on/off button 9 Backup button 10 Menu button 11 Function button 12 S tatus button 13 Move Left 14 Move Up 15 Enter button 16 Move Right 17 Move down 18 Record button 19 Shuttle: to control the DVR to play the record frame by frame. 20 Shuttle: to control the playback speed 21 Search button 22 Play button Page 22 ...
-
Maxtor QSNDVR9M - page 21
23 Fast Reverse 24 Fast forward 25 St o p 26 Remote controller receiver 27 28 LED indic ator lights, for power , H DD and backup, network statu s, playback status and record status respectively . Attention : The CD-RW/DVD-RW is optional. If a CD-RW/DVD-RW is connected to the A T A interface, the maximum number of HDDs you can attach to the A T A in ...
-
Maxtor QSNDVR9M - page 22
2.5 Remote control description Put the Battery into the Remote control: Open the battery cover of Remote control Put in two AAA batteries and make sure that they are inserted corre ctly . Replace the battery cover The top view of remoter control: The button description: Number Icon Description 1 Record button : Press this button to st art recording ...
-
Maxtor QSNDVR9M - page 23
2 Backup button : Press this button, the DVR enters the backup menu (Fig 3.3.7 USB backup). The details w ill be given in Chapter 3.3.3: BACKUP 3 Information button : Press this button to display status information of the DVR on the screen (Fig 3.3.2 S tatus view). 4 Number buttons : These number buttons are used f or selecting channels and other f ...
-
Maxtor QSNDVR9M - page 24
10 Search button: Press this button to e nter to recording search page 11 Move Up 12 Move Left 13 Move Right 14 Move Down 15 SR is for Reverse when the DVR plays record while SF is for Forward 16 Chang e the channel on e by one, “-” i s used to change the chann el from 16 to 1, and “+” is for changing the channel from 1 to 16 17 Fast revers ...
-
Maxtor QSNDVR9M - page 25
22 Pan/T ilt control 23 Audio s w itch 24 Log file button 25 Picture in picture: select the chann el to display as small picture first, and then press PIP button to enter PIP mode, the background picture is the next channel . For example, If the us er selects channel 10 first, and the n press PIP bu tton, the scr een will displa y as the Fig2.1.1 P ...
-
Maxtor QSNDVR9M - page 26
6 7 5 8 9 10 11 12 Are the battery’s poles (+ and -) in the correct position? Is battery is out of power? Is there is barrier between th e Remote control and DVR? Are signals tr ansmitted by other remote contro l devices disturbing the Remo te Control? Attention : If none of the above apply, please contact Q-S ee to replace the remote control 11 ...
-
Maxtor QSNDVR9M - page 27
2.6 Alarm cable connection Example of alarm output connection: Attention : The alarm output is TTL high level control. T he connection method is described in detail in the Above picture. This DVR can carry sixteen sensor alar m input signals and four alarm output sign als. There are two types of alarm inputs: types of alarm inputs: V oltage input ( ...
-
Maxtor QSNDVR9M - page 28
Basic operation guide 3.1 How to st art the DVR Attention : Before poweri ng on the machine, please make sure the power input (1 10V/220V) of DVR matches the local power supply , if not , please move the red flip switch on the rear panel to the correct input. If the power indicator light is off, please do the following: If the DVR is not con nected ...
-
Maxtor QSNDVR9M - page 29
machine is on. (The details of admin password and user password are described in chapter 3.2.1 SETUP-SYSTEM). Input default password-“0000” to enter the setup menu when yo u start the DVR, assuming that you have not changed the password or you have rec over ed the default setting. The date, time and channel nam e are displayed on the screen. Sy ...
-
Maxtor QSNDVR9M - page 30
3.2 Login and setup the sy stem The menu structure chart: A D M I N PA S S W O R D U S E R PA S S WO R D SY S TEM PA S S W O R D C H E C K M E N U LI V E REC O RD STORA G E NETWOR K S E N S O R / A LA R M AUDIO Page 32 SEQU EN C E DWELL[FU LL] SE Q U EN C E DWEL L[ QUAD] CAM ER A NAM E CAM ER A ST A T US CAM ER A COLO R P T Z F P R O T O C O L P T ...
-
Maxtor QSNDVR9M - page 31
There are two users in the origin DVR system. One is Admin which has highest priority to set system’ s configuration and whose password is “000 0”, the other is common user whic h is just allowed to see the live play and the playback picture and does not h ave the ri ght to chang e the user password, which is done by Admin users. Operation: P ...
-
Maxtor QSNDVR9M - page 32
3.2.1 SETUP-SYSTEM The menu is as above: (Fig 3.2.2 System setup) ADMIN P ASSWORD : Administrator password is “0000” by default, only the administrator has the right to change it which is comprised of four numbers between 0 and 9 (F ig 3.2.3 Setup admin p assword). Page 34 Page 34 Page 34 ...
-
Maxtor QSNDVR9M - page 33
USER P ASSWORD : Common user password is “0000” by default as well. However , only the administrator is authorized to change it which is comprised of fo ur numbers between 0 a nd 9. P ASSWORD CHECK : If you choose “ON”, user s have to inp ut the password before entering men us. Y ou can setup the DVR’s configuration if you enter the admin ...
-
Maxtor QSNDVR9M - page 34
BOTTOM-BLACK : T ime is displayed at the bottom in black OFF : There is no time displayed in the play back mode. CURRENT ST A T US VIEW : Choose “ON”, there will be some information appeari ng on the screen. For exam ple, HDD quantity , used ratio of HDD, record mode including manual/alarm/motion etc… Choose “OFF”, there is no information ...
-
Maxtor QSNDVR9M - page 35
SOFTW ARE UPDA TE : (Fig 3.2.8 Soft ware upda te) USB UPDA TE : Update firmware from USB flash memory Press USB UPDA TE a n d below screen will pop up P Page 37 ...
-
Maxtor QSNDVR9M - page 36
Update firmware: Make sure the updating firmware is on the USB disk Do not power off the DVR during updating; Press “ENTER” button to start updating. Then the system will c heck the updating firmware When the updating firmware is found O. K., the system start s to update. Update process: Erase the former file; Check the sp ace for update; When ...
-
Maxtor QSNDVR9M - page 37
about two minutes to update. When the erase, blank check and up date are done, system will c heck the new program which has been written. After the p rogram check is done, the system will restart. NETWORK UPDA TE : The update information is also a vai la bl e on the network, to choose this option Server IP: The IP addres s of the network where the ...
-
Maxtor QSNDVR9M - page 38
CAMERA NAME : Name of the channel. It is comprised of the English letters from “a” to “z” or the numbers from “0 ” to “ 9”. CAMERA ST A TUS : If you choose “SHOW”, this image will be displayed on the scre en. If you choose “HIDE”, the image will not be displayed on the screen in live status or in playback statu s. When the u ...
-
Maxtor QSNDVR9M - page 39
are eighteen options for users: PELCO_D-2400, PELCO_D-9600, P ELCO_P-4800, PELCO_P-9 600, SCC641-960 0, SCC641-19200, SK2161-9600, CNB _102-9 600, ADTECH-4800, 15-CD51M-2 400, Chub b iSD-9600, COP1-24 00, COP1-4800, COP1- 9600, COP1-19200 , COP2-960 0, 15-CD51M-2 400, DSC230-960 0 PTZF ID : Setup the PTZF address, you can choose from “000” to ? ...
-
Maxtor QSNDVR9M - page 40
SPOT QUAD D WELL : Channel-s witching circulates from quad 1 to quad 4 (The order is: channel 1,2,3,4 → channel 5,6,7,8 → channel 9, 10,1 1,12 → channel 13,14,15,16 → channel 1,2,3, 4 → …), press “Enter” button to get access to the configuration setup menu to modify the interval time between two sets of picture switching. The user c ...
-
Maxtor QSNDVR9M - page 41
maximum is 4. If the record resolution is 360x288(P AL)/360x24 0(NT SC), t here are five fr ame rates to choose: 0, 1, 2, 4, 8, the maximum is 8. Attention : These three factors above decide the qualit y of picture and t he use ratio of HDD. SETUP- REC OPTIONS : Setup of record option (Fig 3.2.15 Setup record option) RECORD CONTINUOU S : If you cho ...
-
Maxtor QSNDVR9M - page 42
records continuously . If an alarm record occurred, the DVR records continuous ly and you can fin d the alarm event through “event search ” or “file search”. PLA Y DEINTERLACE : Interlace scan and play . If you choose “ON”, the DVR will play back after an internal of line. If you choose t he “OFF”, this func tion is disabled. Attent ...
-
Maxtor QSNDVR9M - page 43
If you choose “OFF”, this function is d isabled. SETUP-REC-EVENT : Setup of the event recor d (Fig 3.2.16 Setup event record) MOTION DETECTION (Fig 3.2.17 Setup motion detection): AREA : This is the dete ction area setup There are three options to choose: ALL, P AR T , OFF ALL : All areas of the camera will be detected. P ART : The p art o f t ...
-
Maxtor QSNDVR9M - page 44
[SETUP -RE C-E VENT(S/D)] Fig3.2.18 Setup se nsor detection SENSOR DETECTION : Ea ch channel matches a relevant Sensor , for example, Channel 2 is linked to Sensor 4, if the Sensor 4 gives a n alarm, the alarm information will be given on the picture by channel 2 (Fig 3.2.18 Setup sens or detection), the “ □ ” means that the channel can not b ...
-
Maxtor QSNDVR9M - page 45
To Choose from: 2 seconds, 4 seconds, 6 seconds, 8 secon ds and10 seconds. POP-UP SCREEN : If you choose “ON”, the ima ge will be in full screen when the DVR gives alarm. If you choose “OFF”, this fu nction is disabled. SETUP-SCHEDULE-REC : Setup of schedule record (Fig 3.2.20 Setup schedule reco rd) Press enter key to visit the menu (Fig 3 ...
-
Maxtor QSNDVR9M - page 46
[SCHEDULE REC- CH 4] SU MO TU WE TH FR SA ALL DA Y AL Fig3.2.21 setup schedule recor d time 1 2 “ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 ” means: “0 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 17 18 19 20 21 22 23”— the 24 hours in a day . The shortest schedule record interval is one hour . For ex ample , if the first “2” is chos ...
-
Maxtor QSNDVR9M - page 47
Press ENTER key to visit the menu, in formation is given below (Fi g 3.2.23 In formation of deletion) “DELETE FILE 0171 200 6040 7_1700 00 15AS D U ARE YOU SURE? [ENTER] → YES [MENU] → NO” Press ENTER key to delete this record or press MENU key to quit deleting “0171 200 60407_170000” is a record name. “U” means unlock, if “U” i ...
-
Maxtor QSNDVR9M - page 48
LOCK/UNLOCK : Lock/unlock the record. Use en ter key to change the status (Fig 3.2.24 Lock/Unlock file). If the file is locked, then the re cord can not be deleted or over written even thou gh the HDD is full. DELETE ALL : If the DVR is recording, the system will Post: “DELETE ALL STOP REC ORDING AND TR Y” Once the recording is sto pped, the sy ...
-
Maxtor QSNDVR9M - page 49
[ENTER] → YES [MENU] → NO” (* represents A B C D) Press enter key to format the HDD, Pre ss menu ke y to cancel this operation. Attention : The format time depends on the HDD capacity, th e larg er th e HDD the longer t h e time. Normally , a 40G HDD takes about eighty seconds. If a CD/DVD drive is connected to an A T A interface, there will ...
-
Maxtor QSNDVR9M - page 50
3.2.5 SETUP-NETWORK (Fig 3.2.27 Setup network ) TYPE : ST A TIC : S tatic IP address. Push “Up” “Down” “left” “Right” b u t t o n s to move the cursor among the digits and push ADD or DEC key to modify t he IP address. (Fig 3.2. 28 Setup static IP). DYNAMIC : Dynamic IP address. Press ENTER key to display the menu, the system will d ...
-
Maxtor QSNDVR9M - page 51
3.2.5.1 Monitoring From a Computer on Same Router On the PC Client, open up the Internet Ex plorer and enter the IP of the DVR (example http://192.168.0.200 ), you will get below screen with the login already filled in, default user name is (netuser) a nd passwo rd (0000). just hit OK and you will be connected. With this Internet Explorer, you can ...
-
Maxtor QSNDVR9M - page 52
3.2.5.2 Monitoring From a Remote Computer Plug the RJ45 cable from the back of DV R to the Switch / Hub or Router. By Default the network setting on this DVR are a s follow: IP ADDRESS: 192.168.1.200 Subnet: 255.255.255.0 Gateway: 192.168.1.1 From a PC connected to the same Rou ter, find the IP address by typing IPCONFIG at command promp t. (START- ...
-
Maxtor QSNDVR9M - page 53
Port 1 is used for logon; Port 2 is used for controlling the DVR; Port 3 is used for live surveillance; Port 4 is used for backup; Port 5 is used for playing back. NET CLIENT ID: The default ID is “NetUser”, t he user can set other four IDs and passwords for viewing th rough t h e net work. (Fig 3.2.31 Net client ID).The login-ID and the passwo ...
-
Maxtor QSNDVR9M - page 54
3.2.5.3 Play Back Recorded File To play back the recorded file, you need to use the CLIENT Software. Install the NETCLIENT Software and run netclient.exe, you will get the belo w screen and click on CONNECT and enter the IP, logi n name is “netuser” and password “0000”. From this program you can do REMOTE PLAYBACK (R -PB) or BACK UP and LOC ...
-
Maxtor QSNDVR9M - page 55
NETWORK THROUGHP UT : T o setup the transfer speed of the DVR in t he network. There a re nine options to choose from: unlimited, 64KBPS, 128KBPS, 256KBPS, 512KBPS, 1MBPS, 2MBPS, 4MBP S, 10MBPS. Users can choose the option according to t he demand (Fig 3. 2.33 Setup net work throughput). 3.2.6 SETUP-SENSOR/ALARM (Fig 3.2.34 Setup sensor/alarm) SENS ...
-
Maxtor QSNDVR9M - page 56
“NC” means normal close. If “NC” is chosen, the DVR will set off the alar m if the alarm is at high level. ALARM MOTION MANAGER (Fig 3.2.35 Alarm motion manager) “ □ ” means unselected “V” means selected, “Absci ssa” means the chan nel number , “ Ordinate” means annunciator number . Every chann el is able to trigger multip ...
-
Maxtor QSNDVR9M - page 57
channel 3 for alarm 1, then if any of the 3 channel s detect a motion event, alarm 1 will send signal. ALARM SENSOR MANAGER (Fig 3.2.36 Alarm sensor manager) “ □ ” means unselected “V” means sele cted, “Abscissa” means the sens or number and “Ordinate” mea ns annunciator number . Every sensor is able to trigger multiple alarms. Fo ...
-
Maxtor QSNDVR9M - page 58
for alarm 1, if any of the 3 sensors are ac tivated, then alarm 1 will se nd an alarm signal. ALARM BUZZER (Fig 3.2.37 Alarm buzzer) ON: S tart the buzzer when DVR gives alarm OFF: The buzzer will not be triggered when DVR detects alarm ALARM OUTPUT (Fig 3.2.38 Alarm output) ON: Alarm on. When the alarm output is on, the DVR w ill send alarm when t ...
-
Maxtor QSNDVR9M - page 59
ALARM OUT PERIOD (Fig 3.2.39 Alarm output period) Alarm continuing time. There are five o ptions to c hoose: 30 seconds, 1 minute, 3 minutes, 10 minutes a nd Continuous. 3.2.7 SETUP-AUDIO “ ■ ” means unselected “V” means selected, “Abscissa” indicates the channel number and “O rdinat e” indicates audio output number . (Fig 3.2.40 ...
-
Maxtor QSNDVR9M - page 60
There are four audio input ports and one audio output port in all. One audio input matches one cha nnel. For example, if user selects audio A for channel 1, channel 1 will record on audio A. 3.3 Function Press the Function button to enter t he basic functio n menu (Fig 3.3.1 F unction menu), which contains the following items: ST A TUS AUDIO BACKUP ...
-
Maxtor QSNDVR9M - page 61
1 2 BEST 5 2 2 2 BEST 6 2 3 2 BEST 7 2 4 2 BEST 8 2 [ST A T US] S/W VER: V1.0. 10-tv_16 (06/05/08 10:07) [HDD] A: 150G(63%) B: NONE C: NO NE D: NO NE NET WO RK: MAC: 00.0E.B5.00.06.32 DDNS: SERVE R (null) FA I L [REC] SIZE 720*576 CH RA QUAL CH RA QUAL CH RA QUAL CH RA QUAL BEST 9 2 BEST 13 2 BEST BEST 10 2 BEST 14 2 BEST BEST 11 2 BEST 15 2 BEST B ...
-
Maxtor QSNDVR9M - page 62
3.3.3 BACKUP & VIEW BACKUP Backup Press the Backup button (Fig 3.3.3 Setup ba ckup ). This DVR supports five media types: CD-R , CD- RW , DVD-R, DVD-RW , USB-MEMOR Y (Including USB flash drive and mobile hard disk), and supports backup to DVD-RW , CD- RW , inter nally and as well as USB externally . P lease refer to list of compatible DVD-RW &a ...
-
Maxtor QSNDVR9M - page 63
backup to CD-R, choose CD-R; if you plan to backup in CD-RW , choose CD-R W , etc… BACKUP BASE: If you want to se arch the file nee ded to backup by file name, choose FILE; if you want to search the file needed to backup by time , choose TIME. Each method i s in the Chapter— ST ART . CHANNEL: If you want to backup the four channels , pleas e ch ...
-
Maxtor QSNDVR9M - page 64
USB BACKUP USB BA CKUP 50% If the backup base is “ FILE”, the “S T ART” choose menu is as shown in Fig 3.3.5 Backup start (file) If the backup base is “TIME”, the “ ST ART” choose menu is as s h o w n i n Fig 3.3.6 Backup start (calendar) and Fig 3.3.7 Backup start (time). Fi rst, choose the date, then, choose the time. [BACKUP-TIME ...
-
Maxtor QSNDVR9M - page 65
screen at the same time as the backup. The USB b ackup process is s h o w n in Fig 3.3.8- USB backup process showing, that is the same as backup with the CD/D VD driver . When the backup is over , a dialogue box will pop up. If the user ba ckup in the USB memory , the sent ence in the dialogue box is: “FLASH BACKUP OK” When you receive this mes ...
-
Maxtor QSNDVR9M - page 66
/ Brief introduction of bu ttons: : Play : Pause : S top : Fa st backward : S tep back ward : S tep forward : Fast forward : V erify if the record has been cha nged or not : V olume control : Snap shot : Number button / / 1-channel/4-channel/9- channel/16-c hannel mode Y ou can use number butt on to choose t he channel which you w ant to see. Page ...
-
Maxtor QSNDVR9M - page 67
The main menu of the Backup viewer: Introduction to W .M Check , SnapShot . W .M Check (W ater Mark Check): While the backup file is paused, clic k this button to check water mark: Page 69 ...
-
Maxtor QSNDVR9M - page 68
After a few minutes, the result w ill pop up. If the backup file has been changed or moved, the system will display “Watermark Check Fail”, if the backu p file has not b e e n changed or moved, the system will prompt “W atermark Check Ok”. SnapShot: Click Sna pShot button, a picture pops up for saving or pri nting. The user can select direc ...
-
Maxtor QSNDVR9M - page 69
3.3.4 P AN/TIL T Move cursor to P AN/TIL T in the function menu, press ENTER button to access this menu (Fig 3.3.9 P AN/TIL T) to control the Fast S peed Dome. Th is particular operation is as follows: Switch to the channel which connects to the Fa st S peed Dome video output. The “Up” “Down” “Left” “Right” buttons control the Fast ...
-
Maxtor QSNDVR9M - page 70
PA N / T I LT ZOOM/FOCUS Z+ AUTOP AN ENTER <<Ch1>> F+ F- Z- <<Ch1>> Fig 3.3.9 P AN/TIL T Fi g3.3.10 ZOOM/F OCUS 3.3.6 SEQUENCE Press “SEQ” button to en ter the sequence play status. If the current screen shows a single channel, press “ SEQ” button to play the sixteen chann els one by one in order. If the current scre ...
-
Maxtor QSNDVR9M - page 71
3.3.7 LOG LIST Press the Lo g button on the remote control, the system will enter the setup menu of log file (Fig 3.3.1 1 Setup log file). LOG FILE: If you choose ALL, the following options will be displayed: MOTION, SENSOR, ALARM, V - LOSS, SYSTEM, HDD, FLIE, DB, POWER , NET . If you choose P AR T , you should choose the option needed manually . T ...
-
Maxtor QSNDVR9M - page 72
FROM: The beginning time of the log file, you can use the number key to ch ange the time. TO: The end time of the log file, you c an use the number key to change the time. Press the OK op tio n, the system will enter the event l og view (Fig 3.3.12 Event log view): Use “Up” “Down” buttons to move the cursor to the log file needed. If th ere ...
-
Maxtor QSNDVR9M - page 73
3.4 Search record Press the “Search” button on the remote control, t here are three search modes which will be displayed on the screen (Fig 3.4.1 Search) TIME SEARCH EVENT SEARCH FILE SEARCH Attention: Search recordings b y time search or file search, search all event re cordings b y event search. Page 75 ...
-
Maxtor QSNDVR9M - page 74
TIME SEARCH : Attention: All the records can be searched in this menu. Operation: Date choose: Press ENTER to access the CALENDAR TIME menu, Use “Up” “Down” “Left” “Right” b ut t on s to mo ve cursor to the date need ed to search.(Fig 3.4.1 Date c hoose). A time which h ad an event record is shown in y ellow font. <<2006-05> ...
-
Maxtor QSNDVR9M - page 75
T ime choose: Below the Y ear-Month s etup, there is the calendar of one month. The s e l e c te d dat e is in green, press ENTER to select the time c hoose menu. (Fig 3.4.2 T ime choose-Page 79). The time displayed in green has a record file. Use “Up” “Do wn” “Left” “Right” b u t t o n s to move to the selected time—hour and minu ...
-
Maxtor QSNDVR9M - page 76
EVENT SEARCH Attention: Onl y alarm events and motion events record can be searched in this menu. Operation: Select the date, whose method is the same as TI ME SEARCH. A time which has event record is shown in yel l ow font. Press “EN TE R” to acce ss the event menu afte r selecting time. (Fig 3.4.3 Event choose). Analyze the record informati o ...
-
Maxtor QSNDVR9M - page 77
Sign Meaning Shortcut key PGUP Page up, to the previous Right button PGDN Page down, to the next Left button LAST T o the last page Backward button FIRST To the first page Forward button [SEARCH TIME ] HOUR: MIN: TIME 00 00 00 Fig3.4.2 Ti m e choose Page 79 ...
-
Maxtor QSNDVR9M - page 78
FILE SEARCH Attention: All the records can be searched in this menu. Operation: Select the date, by the same method as TIME SE AR CH. A time which has an event record is shown in ye ll ow font. Press “EN TE R” to acce ss the play f ile list. (Fig 3.4.4 File search) Analyze the record information. T aking one of the file records as an example. T ...
-
Maxtor QSNDVR9M - page 79
Use “Up” “Down” b u t t o n s to choo se the file record, Press the “ENTER” button to view the record chosen, the “Forwar d” “Backward” “Play/pause” buttons can be used to control the r ecording. Pres s “STOP” button to go back to live picture If the event list is too long for one page, user can move to the page need ed ...
-
Maxtor QSNDVR9M - page 80
Page 82 ...
-
Maxtor QSNDVR9M - page 81
Appendix Appendix A: Main S tandard & Parameter chart Model 16Chann el VIDEO Input Channel 16CH Input Level 1.0Vp-p±10% Composit e, 75Ohm Balanced Video S tandard Auto / NTSC / P AL Main TV Out 1.0Vp-p Composite, 75Ohm Balanced Screen S plit Control 1, 16Screen Screen Rotation Control 1~9Seconds NTSC 720(H)x480 (V) Resolution PA L 720(H)x576( ...
-
Maxtor QSNDVR9M - page 82
Function Auto Sequence Screen S plit, PIP AUDIO Compression ADPCM Audio In / Out 4CH /1CH Input Level TBD(0.5~1.4Vp-p@20Ko hm) RECORDING Compression MPEG4 NTSC 720(H)x480( V), 720(H)x2 40(V), 360(H )x240(V) Resolution PA L 720(H)x576( V), 720(H)x2 88(V), 360(H )x288(V) 360 x240 Max 120FPS 720 x240 Max 60FPS NTSC 720 x480 Max 30FPS 360 x288 Max 100F ...
-
Maxtor QSNDVR9M - page 83
S peed 5400RPM, 7200RPM Ty p e EIDE compatible SEARCHING & PLA YBACK Searching Method T ime, Event, File REMOTE SURVEILLANCE Monitoring Environment Client Software, Web Browser ALARM Sensor Input 16Ports Alarm Output 4 TTL-Out(Progr ammable), T erminal Motion Detection Av ailable For Each Camera Multi Detection Level CONNECTOR Video Input BNC 1 ...
-
Maxtor QSNDVR9M - page 84
External Cont rol (RS-422/485) T erminal Block Sensor Input T erminal Block Alarm Output T erminal Block PTZ (RS-485) 2Pins T erminal Block Ethernet RJ-45, 10/100Mbps USB 2.0 2Ports ELECTRICAL Power Source 1 15~230V AC (50~60Hz) Power Cons umption TBD(App. 50 ~ 60Watt) BACKUP Digital Backu p Network, External CD/DVD RAM, USB S torage External CD/ D ...
-
Maxtor QSNDVR9M - page 85
P AL NTSC Picture Qualit y Resolution T o t al Frame Rate Ca p abilit y Resolution T o t al Frame Rate Ca p abilit y Best 720*576 25F/S 3.80G 720*4 80 30F/S 3.75G Hi g h 720*576 25F/S 1.91G 720*4 80 30F/S 2.34G Normal 720*576 25F/S 0.96G 720*4 80 30F/S 1.20G Low 720*576 25F/S 0.83G 720*4 80 30F/S 0.80G Best 720*288 50F/S 4.10G 720*2 40 60F/S 3.94G ...
-
Maxtor QSNDVR9M - page 86
Appendix C: The meaning of some abbreviations Letters Meaning Letters Meaning D 720*576(P A L)/720*480( NTSC) H 720*28 8(P AL)/720*2 40(NTSC) C 360*288(P A L)/720*240( NTSC) NT A network event U Unlock L lock MD Motion detection SD Sensor detection PW An event of power on occurred VL Video loss AL Alarm DB The data base recurred o r united HD An ev ...
Do you have a question concerning Maxtor QSNDVR9M?
Use the form below
If you did not solve your problem by using a manual Maxtor QSNDVR9M, ask a question using the form below. If a user had a similar problem with Maxtor QSNDVR9M it is likely that he will want to share the way to solve it.