English dropdown-ico

Manual JVC AV-25MX56

70 pages 1.37 mb
Download

Go to site of 70

Summary
  • JVC AV-25MX56 - page 1

    INSTRUCTIONS GGT01 16-001A-H A V -29BS26 A V -21BS26 A V -29BX16 A V -21BX16 A V -29MS26 A V -21BX16B A V -29MX16 A V -21MS26 A V -29MX56 A V -21MX16 A V -29MX76 A V -21MX56 A V -29SS26 A V -21MX76 A V -29SX56 A V -29SX76 A V -25MS26 A V -25MX16 A V -25MX56 A V -25MX76 COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Kno ...

  • JVC AV-25MX56 - page 2

    2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV . 2 A void damaging the power cord and mains plug. When unpluggin ...

  • JVC AV-25MX56 - page 3

    3 Knowing your TV’ s features 4 1 2 3 EXIT 5 Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number . The model number is indicated at the rear of your TV . When you press a button conce ...

  • JVC AV-25MX56 - page 4

    4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 ! 4 EXIT " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number . 5 VOLUME -/+ Adjust the volume level. 6 TV/VIDEO EX ...

  • JVC AV-25MX56 - page 5

    5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 . PICTUR ...

  • JVC AV-25MX56 - page 6

    6 TV buttons and functions The illustrations shown below is for A V -21BS26 and A V -29SS26 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME RV L/MONO IN(VIDEO-3) Front of the TV A V -29SS26 Rear of the TV A V -29SS26 POWER VOLUME CHANNEL MENU OK VR L / MONO ...

  • JVC AV-25MX56 - page 7

    7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the ...

  • JVC AV-25MX56 - page 8

    8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language*. • Press 5 / ∞ button to select your desired T eletext language group*. For details, see page 13. (For BS26/MS26/ SS26/MX76/SX76 series o ...

  • JVC AV-25MX56 - page 9

    9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch. Pr ...

  • JVC AV-25MX56 - page 10

    10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Dee ...

  • JVC AV-25MX56 - page 11

    11 AI ECO SENSOR (ECO)/ECO MODE Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast. DISPLA Y (for AI ECO SENSOR only) Display the graphic of the function. T o operate this function ...

  • JVC AV-25MX56 - page 12

    12 PIP Display the sub picture. T o cancel, press the PIP button again. Notes: • Y ou can hear the sound from the main picture only . • When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture. Press ( Input ) T o change sub picture to video mode. Press CHANNEL -/+ ...

  • JVC AV-25MX56 - page 13

    13 Original features for picture (continued) TEXT LANGUAGE Y ou can set the T eletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INST ALL menu, then choose the desired language group. GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian, French, Spanish, Portuguese, T urkish GROUP-2 Polish, Germa ...

  • JVC AV-25MX56 - page 14

    14 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Basic setting for sound B/G I D/K M SOUND MODE Y ou can ...

  • JVC AV-25MX56 - page 15

    15 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO. T o operate this function with a menu: STEREO / I ■ II ( ) Y ou can enjoy the st ...

  • JVC AV-25MX56 - page 16

    16 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON). Press the ? ...

  • JVC AV-25MX56 - page 17

    17 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original pi ...

  • JVC AV-25MX56 - page 18

    18 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST . 2 Select a programme number or video terminal by pressing the 5 / ∞ b ...

  • JVC AV-25MX56 - page 19

    19 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically . 3 The EDIT ...

  • JVC AV-25MX56 - page 20

    20 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21. 1 Display the INST ALL menu. 2 Choose EDIT/MA ...

  • JVC AV-25MX56 - page 21

    21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Aus ...

  • JVC AV-25MX56 - page 22

    22 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -21BS26 and A V - 29SS26 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for t ...

  • JVC AV-25MX56 - page 23

    23 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV . Keep the device apart from your TV . Alternately , you can also use the magnetic- sh ...

  • JVC AV-25MX56 - page 24

    © 2006 Victor Company of Japan, Limited 0406-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements For Australia: AC 220 to 24 ...

  • JVC AV-25MX56 - page 25

    INSTRUCTIONS GGT01 18-001A-H A V -29MS16 A V -29SS16 A V -25MS16 A V -21MS16 COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions ....... ...

  • JVC AV-25MX56 - page 26

    2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV . 2 A void damaging the power cord and mains plug. When unpluggin ...

  • JVC AV-25MX56 - page 27

    3 Knowing your TV’ s features EXIT RM-C1286 Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number . The model number is indicated at the rear of your TV . When you press a button concer ...

  • JVC AV-25MX56 - page 28

    4 Remote control buttons and basic functions EXIT RM-C1286 1 6 3 7 9 5 8 2 ! 4 " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number . 5 VOLUME -/+ Adjust the volume level. 6 TV ...

  • JVC AV-25MX56 - page 29

    5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 . PICTUR ...

  • JVC AV-25MX56 - page 30

    6 TV buttons and functions The illustrations shown below is for A V -21MS16 and A V -29SS16 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME RV L/MONO IN(VIDEO-3) Front of the TV A V -29SS16 Rear of the TV A V -29SS16 6 , 2 2 ,  -/./ 9 # " # 2  6 6 ...

  • JVC AV-25MX56 - page 31

    7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the ...

  • JVC AV-25MX56 - page 32

    8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language. • TV will start searching for the channels. T o stop AUTO PROGRAM, press MENU/OK button. Setting up your TV (continued) • T o complete th ...

  • JVC AV-25MX56 - page 33

    9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch. Pr ...

  • JVC AV-25MX56 - page 34

    10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Dee ...

  • JVC AV-25MX56 - page 35

    11 AI ECO SENSOR (ECO) Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1 Mild contrast (recommended.) MODE-2 Even contrast. DISPLA Y Display the graphic of the function. T o operate this function with a menu: When you set DVD THEA TER ST A TU ...

  • JVC AV-25MX56 - page 36

    12 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Basic setting for sound B/G I D/K M SOUND MODE Y ou can ...

  • JVC AV-25MX56 - page 37

    13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO. T o operate this function with a menu: STEREO / I ■ II ( ) Y ou can enjoy the st ...

  • JVC AV-25MX56 - page 38

    14 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON). Press the ? ...

  • JVC AV-25MX56 - page 39

    15 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original pi ...

  • JVC AV-25MX56 - page 40

    16 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST . 2 Select a programme number or video terminal by pressing the 5 / ∞ b ...

  • JVC AV-25MX56 - page 41

    17 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically . 3 The EDIT ...

  • JVC AV-25MX56 - page 42

    18 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 19. 1 Display the INST ALL menu. 2 Choose EDIT/MA ...

  • JVC AV-25MX56 - page 43

    19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Aus ...

  • JVC AV-25MX56 - page 44

    20 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -21MS16 and A V - 29SS16 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for t ...

  • JVC AV-25MX56 - page 45

    21 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV . Keep the device apart from your TV . Alternately , you can also use the magnetic- sh ...

  • JVC AV-25MX56 - page 46

    © 2006 Victor Company of Japan, Limited 0606-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 1 10 to 240 V , 50 Hz / ...

  • JVC AV-25MX56 - page 47

    INSTRUCTIONS GGT0120-001A-H A V -2988SE A V -2986ME A V -2986SE A V -2956BE A V -2956ME A V -2586ME A V -2186ME A V -2156BE A V -2156ME COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions ...... ...

  • JVC AV-25MX56 - page 48

    2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV . 2 A void damaging the power cord and mains plug. When unpluggin ...

  • JVC AV-25MX56 - page 49

    3 Knowing your TV’ s features 1 2 3 EXI T Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number . The model number is indicated at the rear of your TV . When you press a button concerne ...

  • JVC AV-25MX56 - page 50

    4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 ! 4 EXIT " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number . 5 VOLUME -/+ Adjust the volume level. 6 TV/VIDEO EX ...

  • JVC AV-25MX56 - page 51

    5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 . PICTUR ...

  • JVC AV-25MX56 - page 52

    6 TV buttons and functions The illustrations shown below is for A V -2156BE and A V -2988SE only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME RV L/MONO IN(VIDEO-3) Front of the TV A V -2988SE Rear of the TV A V -2988SE POWER VOLUME CHANNEL MENU OK VR L / MONO ...

  • JVC AV-25MX56 - page 53

    7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the ...

  • JVC AV-25MX56 - page 54

    8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language. • Press 5 / ∞ button to select your desired T eletext language group. For details, see page 13. • TV will start searching for the chann ...

  • JVC AV-25MX56 - page 55

    9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch. Pr ...

  • JVC AV-25MX56 - page 56

    10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Dee ...

  • JVC AV-25MX56 - page 57

    11 AI ECO SENSOR (ECO)/ECO MODE Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast. DISPLA Y (for AI ECO SENSOR only) Display the graphic of the function. T o operate this function ...

  • JVC AV-25MX56 - page 58

    12 PIP Display the sub picture. T o cancel, press the PIP button again. Notes: • Y ou can hear the sound from the main picture only . • When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture. Press ( Input ) T o change sub picture to video mode. Press CHANNEL -/+ ...

  • JVC AV-25MX56 - page 59

    13 Original features for picture (continued) TEXT LANGUAGE Y ou can set the T eletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INST ALL menu, then choose the desired language group. GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian, French, Spanish, Portuguese, T urkish GROUP-2 Polish, Germa ...

  • JVC AV-25MX56 - page 60

    14 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Basic setting for sound B/G I D/K M SOUND MODE Y ou can ...

  • JVC AV-25MX56 - page 61

    15 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO. T o operate this function with a menu: STEREO / I ■ II ( ) Y ou can enjoy the st ...

  • JVC AV-25MX56 - page 62

    16 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON). Press the ? ...

  • JVC AV-25MX56 - page 63

    17 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original pi ...

  • JVC AV-25MX56 - page 64

    18 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST . 2 Select a programme number or video terminal by pressing the 5 / ∞ b ...

  • JVC AV-25MX56 - page 65

    19 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically . 3 The EDIT ...

  • JVC AV-25MX56 - page 66

    20 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21. 1 Display the INST ALL menu. 2 Choose EDIT/MA ...

  • JVC AV-25MX56 - page 67

    21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Aus ...

  • JVC AV-25MX56 - page 68

    22 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -2156BE and A V - 2988SE, which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the pro ...

  • JVC AV-25MX56 - page 69

    23 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV . Keep the device apart from your TV . Alternately , you can also use the magnetic- sh ...

  • JVC AV-25MX56 - page 70

    © 2006 Victor Company of Japan, Limited 0506-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements For A V -25, A V -29 series ...

Manufacturer JVC Category CRT Television

Documents that we receive from a manufacturer of a JVC AV-25MX56 can be divided into several groups. They are, among others:
- JVC technical drawings
- AV-25MX56 manuals
- JVC product data sheets
- information booklets
- or energy labels JVC AV-25MX56
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC AV-25MX56.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC AV-25MX56, service manual, brief instructions and user manuals JVC AV-25MX56. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC AV-25MX56.

Similar manuals

A complete manual for the device JVC AV-25MX56, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC AV-25MX56 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC AV-25MX56.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC AV-25MX56 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC AV-25MX56, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC AV-25MX56, that we can find in the current document
3. Tips how to use the basic functions of the device JVC AV-25MX56 - which should help us in our first steps of using JVC AV-25MX56
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC AV-25MX56
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC AV-25MX56 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC AV-25MX56?

Use the form below

If you did not solve your problem by using a manual JVC AV-25MX56, ask a question using the form below. If a user had a similar problem with JVC AV-25MX56 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)