English dropdown-ico

Manual Snapper EYZ16335BVE

32 pages 1.61 mb
Download

Go to site of 32

Summary
  • Snapper EYZ16335BVE - page 1

    1 Safety Instructions & Operator’s Manual for EUROPEAN SCRAMBLER HYDRO DRIVE SERIES 5 MODELS EYZ16335BVE MODEL NUMBER EXPLANATION E Y Z 16 33 5 B V E MODEL DESIGNATION ENGINE OPTIONS DRIVE SYSTEM TYPE ENGINE TYPE ENGINE HORSE POWER SERIES DESIGNATION CUTTING WIDTH E – European Model Y – SCRAMBLER Z – Zero Turning Radius 16 - 16 HP Engin ...

  • Snapper EYZ16335BVE - page 2

    2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these in ...

  • Snapper EYZ16335BVE - page 3

    3 IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mow ing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, sw itches, blade controls and other safety dev ices frequently for proper operation and location. 9. Make sure all saf ...

  • Snapper EYZ16335BVE - page 4

    4 IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE 1. DO NOT store machine or fuel container inside w here fumes may reach an open flame, spark or pilot light such as in a w ater heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a we ll v ...

  • Snapper EYZ16335BVE - page 5

    5 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-4 TABLE OF CO NTENTS ...................................................................................................... 5 SECTION 1 - FAMI LIARIZATI ON..................................................................... ...

  • Snapper EYZ16335BVE - page 6

    6 Section 1 - FAMILIARIZATION FIGURE 1.1 1. 1 INTRODUCTION This manual has been prepared for the operator’s of the SNAPPER SCRAMBLER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT S ...

  • Snapper EYZ16335BVE - page 7

    7 Section 1 - FAMILIARIZATION – DECALS / SYMBOLS All operators should locate, read and understand all decals on the machine before attempting any operation of the machine. If any operator has difficulty in understa nding certain sy mbols incorporated in the decals, an authorized SNAPPER dealer should be contacted for explanation. READ MA NUA L 2- ...

  • Snapper EYZ16335BVE - page 8

    8 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check tires and add or release air as needed to bring pressure to 12 P.S.I. in front and 12 P.S.I. in rear tires. 2.1.2. Check guards, deflectors and covers to make sure all are in place and securely ...

  • Snapper EYZ16335BVE - page 9

    9 Section 2 - OPERATING INSTRUCTIONS IMPORTANT: This SCRAMBLER is equipped w ith hydrostatic driv e. The forw ard, rearw ard and steering movement of the machine is controlled by a joystick lever. Joy stick operations should be performed only from the operator’s position in the seat. A small movement of the joy stick can cause the machine to move ...

  • Snapper EYZ16335BVE - page 10

    10 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and w hile backing. 2.2.3. MOWER BLADE 1. With engine running, move engine speed control to the Rabbit or “fast” position. 2. Pull the blade switch out into the “ON” position to enga ...

  • Snapper EYZ16335BVE - page 11

    11 Section 2 - OPERATING INSTRUCTIONS 2.3.5. CUTTING HEIGHT ADJUSTMENT This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving d ...

  • Snapper EYZ16335BVE - page 12

    12 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the SCRAMBLER, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number. 3.2 SERVICE - AFTER FIRST 5 HOURS WARNING DO NOT atte ...

  • Snapper EYZ16335BVE - page 13

    13 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on mach ...

  • Snapper EYZ16335BVE - page 14

    14 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on mach ...

  • Snapper EYZ16335BVE - page 15

    15 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on mach ...

  • Snapper EYZ16335BVE - page 16

    16 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on mach ...

  • Snapper EYZ16335BVE - page 17

    17 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remov e spark plug w ire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w ...

  • Snapper EYZ16335BVE - page 18

    18 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns; allow all parts to cool before w o ...

  • Snapper EYZ16335BVE - page 19

    19 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remov e spark plug w ire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns; allow all parts to cool before w ...

  • Snapper EYZ16335BVE - page 20

    20 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns; allow all parts to cool before w o ...

  • Snapper EYZ16335BVE - page 21

    21 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remov e spark plug w ire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns; allow all parts to cool before w ...

  • Snapper EYZ16335BVE - page 22

    22 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns; allow all parts to cool before w o ...

  • Snapper EYZ16335BVE - page 23

    23 Section 4 - ADJUSTMENTS & REPAIR 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current. To perform unloaded testing, check charge condition using ...

  • Snapper EYZ16335BVE - page 24

    25 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not Crank 1. Battery dead. 1. Service battery. Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. C l ean and check connections for good contact. 4. Defective ignition sw itch. 4. Contact authorized SNA PPER dealer. 5. Blade engagement switc ...

  • Snapper EYZ16335BVE - page 25

    26 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Excessive Vibration 1. Damaged, out of balance or bent mo w er blades. 1. Service mower blade(s). 2. Loose blade components. 2. Service and tighten loose parts. 3. Loose or missing air lift (if equipped). 3. Replace air lifts. Tighten to proper torque. 4. Lumpy or fray ed belt. 4. Replace ...

  • Snapper EYZ16335BVE - page 26

    27 SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 8 X Initial Oil Change Page 12 X Periodic Oil Change Page 13 X* Oil Filter Initial Oil Change Engine Manual & Page 12 X Periodic Oil Change Engine Manual & Page 13 X* Air Pre-Cleaner Clean Sponge Element Engine Ma ...

  • Snapper EYZ16335BVE - page 27

    28 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in materi ...

  • Snapper EYZ16335BVE - page 28

    29 PRIMARY MAINTENANCE ...

  • Snapper EYZ16335BVE - page 29

    30 PRIMARY MAINTENANCE ...

  • Snapper EYZ16335BVE - page 30

    31 PRIMARY MAINTENANCE ...

  • Snapper EYZ16335BVE - page 31

    32 PRIMARY MAINTENANCE ...

  • Snapper EYZ16335BVE - page 32

    33 Safety Instructions & Operator’s Manual for EUROPEAN SCRAMBLER HYDRO DRIVE SERIES 5 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contai n very important emissions information and critical safety warnings. Read, Understand, ...

Manufacturer Snapper Category Lawn Mower

Documents that we receive from a manufacturer of a Snapper EYZ16335BVE can be divided into several groups. They are, among others:
- Snapper technical drawings
- EYZ16335BVE manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper EYZ16335BVE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper EYZ16335BVE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper EYZ16335BVE, service manual, brief instructions and user manuals Snapper EYZ16335BVE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper EYZ16335BVE.

Similar manuals

A complete manual for the device Snapper EYZ16335BVE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper EYZ16335BVE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper EYZ16335BVE.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper EYZ16335BVE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper EYZ16335BVE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper EYZ16335BVE, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper EYZ16335BVE - which should help us in our first steps of using Snapper EYZ16335BVE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper EYZ16335BVE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper EYZ16335BVE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper EYZ16335BVE?

Use the form below

If you did not solve your problem by using a manual Snapper EYZ16335BVE, ask a question using the form below. If a user had a similar problem with Snapper EYZ16335BVE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)