-
TANDBERG D50104-15 - page 1
Sofware V ersion B4 D50104-15 This document is not to be reproduced in whole or in part without the permission in writing from: User Manual Health Care Sy stem III ...
-
TANDBERG D50104-15 - page 2
2 Health Care System III Declaration of Conformity Manufacturer: T ANDBERG United States 1860 Michael Faraday Drive Suite 250 Reston, V A 20190 T el: 703 709 4281 Fax: 703 709 4231 V ideo: 703 437 6991 Authorized Representatives: Europe & Asia Pacific Canada T andberg T andberg Philip Pedersens vei 22 6505 T rans-Canada Highway . 1366 L ysaker ...
-
TANDBERG D50104-15 - page 3
Health Care System III 3 T rademarks and Copyright COPYRIGHT © 2001, T ANDBERG 1860 Michael Faraday Drive, Suite 250 Reston, V irginia, USA 20190 T el: 703-709-4281, Fax: 703-709-4231 All rights reserved. This document contains information that is proprietary to T ANDBERG. No part of this publication may be reproduced, stored in a retrieval system ...
-
TANDBERG D50104-15 - page 4
4 Health Care System III W arning While no currently available technology can completely substitute for the in-person physical examination of an individual patient or specimen, the T ANDBERG products provide high quality , high resolution, long distance images. When used properly , these Healthcare products can provide a significant and valuable to ...
-
TANDBERG D50104-15 - page 5
Health Care System III 5 Precautions On Safety For your protection, please read these safety instructions completely before operating the equipment and keep this manual for future reference. The information in this summary is intended for persons who operate the equipment as well as repair personnel. Carefully observe all warnings, precautions and ...
-
TANDBERG D50104-15 - page 6
6 Health Care System III On Cleaning T o keep the system looking brand new , periodically clean it with a mild detergent solution. Never use strong solvents such as thinner or benzine, or abrasive cleaners since they will damage the cabinet. As a safety precaution, unplug the system before cleaning it. Never attempt to sterilize this unit. If requi ...
-
TANDBERG D50104-15 - page 7
Health Care System III 7 Contents Declaration of Conformity ............................................................................................................................................ 2 W arning .......................................................................................................................................... ...
-
TANDBERG D50104-15 - page 8
8 Health Care System III Getting Started ........................................................................................................... 30 System start-up ........................................................................................................................................................... 30 W elcome menu ......... ...
-
TANDBERG D50104-15 - page 9
Health Care System III 9 W eb-interface .............................................................................................................................................................. 53 T ext Chat / Closed Captioning ..................................................................................................................... ...
-
TANDBERG D50104-15 - page 10
10 Health Care System III V ideo Settings ............................................................................................................................................................. 69 Camera Tracking Mode ........................................................................................................... .................. ...
-
TANDBERG D50104-15 - page 11
Health Care System III 11 Ethernet Speed ................................................................................................................................................. 85 Restart ........................................................................................................................................................ ...
-
TANDBERG D50104-15 - page 12
12 Health Care System III Introduction Introduction This User Manual is provided to help you make the best use of your T ANDBERG system. The system offers superior quality audio and video in a fully-featured unit. Main Features: • Supports videoconferencing via both IP and ISDN networks. • Selection of up to 3 Mbps call quality . • Built-in M ...
-
TANDBERG D50104-15 - page 13
Health Care System III 13 Introduction At a Glance — The HCS III System ...
-
TANDBERG D50104-15 - page 14
14 Health Care System III Introduction Main HCS III Cart Camera The main W A VE (wide angle view) camera is mounted on top of the monitor and is continent specific (NTSC for North America or P AL for Europe). It is a high quality colour camera with a fast pan/tilt/zoom action. The camera is controlled by the system’ s infrared remote control whic ...
-
TANDBERG D50104-15 - page 15
Health Care System III 15 Introduction Keyboard and Mouse (customer supplied) The customer supplied keyboard is placed within the retractable tray below the table top. The customer supplied mouse can be placed on the table top or the mouse tray that is retractable from beneath the left or right side of the keyboard tray . When moving the cart, stor ...
-
TANDBERG D50104-15 - page 16
16 Health Care System III Introduction Headset and Jack The headset can be used as an alternative to the main system speakers. When the headset is plugged into the jack that is mounted on the cart post above the computer shelf, the audio is cut from the system speakers and is routed to the headset. The other system audio outputs are not af fected b ...
-
TANDBERG D50104-15 - page 17
Health Care System III 17 Introduction Mobile Camera Cart (optional) Camera A standard, continent specific (NTSC for North America or P AL for Europe) T ANDBERG W A VE camera is mounted on a fully adjustable arm on the mobile stand. The camera provides high resolution images with a fast pan/tilt/zoom action that is controlled from the T andberg rem ...
-
TANDBERG D50104-15 - page 18
18 Health Care System III Introduction T o adjust the camera arm height, support the arm with one hand and loosen the two release handles only enough to permit movement of the arm, and carefully move the arm up or down to the required height. Securely tighten both release handles. Wa r n i n g Do not loosen the two release handles without supportin ...
-
TANDBERG D50104-15 - page 19
Health Care System III 19 Installation Installation Precautions • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the ne ...
-
TANDBERG D50104-15 - page 20
20 Health Care System III Installation 6) Remove the ramp that is located under the unit and place it against the front of the skid. W ith one person holding the left side of the unit, and one person holding the right side of the unit, roll and guide the unit off the skid and down the ramp. 7) W e recommend that you store all the packing material s ...
-
TANDBERG D50104-15 - page 21
Health Care System III 21 Installation ...
-
TANDBERG D50104-15 - page 22
22 Health Care System III Installation I F EQUIPED WITH THE Z ENITH L CD DISPLA Y , THE D UAL O UT S-V IDEO CONNECTOR WILL NOT BE AVA I L A B L E VCR • 1 video input supporting composite signals through a BNC connector (V ideo In 4 on Codec). • 1 video output supporting composite signals through a BNC connector (V ideo Out 3 on Codec). • 1 au ...
-
TANDBERG D50104-15 - page 23
Health Care System III 23 Installation 3) Feed the power cord down into the post and out to the power bar . Plug the power cord into the cart’ s isolated power bar . 4) Re-install the cable entry cover and the back panel on the cart. Connect the VCR cables to VCR on the rear interface panel as follows: 1) Connect a video cable between V ideo Out ...
-
TANDBERG D50104-15 - page 24
24 Health Care System III Installation ISDN BRI Cables T ake the six ends of the ISDN BRI cables and verify that they are labelled ISDN 1, 2, 3, 4, 5 and 6. Connect ISDN cable No. 1 to the first ISDN socket (S/T -interface) provided by the service provider . This will be your main number . Connect ISDN cable No. 2 to the second ISDN socket, ISDN ca ...
-
TANDBERG D50104-15 - page 25
Health Care System III 25 Installation 2) Place the PC on the shelf close to the back, leaving only enough room for the cables between the PC and the rear panel of the cart. 3) Place the keyboard and mouse on their respective shelves and route their cables from the rear of the keyboard shelf to the cart post. Remove the cable entry cover from the p ...
-
TANDBERG D50104-15 - page 26
26 Health Care System III Installation Enable the external microphone within the system setup menu as follows: 3) W ith the T ANDBERG I/R remote control, press the “ MENU ” button. 4) Highlight the Audio Setup option, and press “ OK .” 5) Highlight the Inputs option , and press “ OK .” 6) T urn off the Mic 1 input. This is to prevent si ...
-
TANDBERG D50104-15 - page 27
Health Care System III 27 Installation Oval cap Cart Adjustments T riple-pivot Arm Counterbalance Adjustment The following procedure applies to the optional LCD display mounting arm and the optional mobile camera cart arm. A nitrogen gas spring is used to counterbalance the weight of the LCD display (or camera). T o adjust the weight capacity of th ...
-
TANDBERG D50104-15 - page 28
28 Health Care System III Installation Operational Considerations Iris Control and Lighting By default the HCS III camera will use an automatic iris to compensate for changes in lighting. In addition to this feature you may further assist the HCS III to maintain the best possible image quality by paying special attention to environmental lighting a ...
-
TANDBERG D50104-15 - page 29
Health Care System III 29 Installation Guidelines for setting up videoconferencing rooms The following are a set of guidelines to consider when either building a videoconferencing room, or using an existing room for videoconferencing. Room: - Should be located away from noise - Should not have windows - Doors should be located off camera - A “dia ...
-
TANDBERG D50104-15 - page 30
30 Health Care System III Getting Started Getting Started System start-up Y our system should be in standby mode. When in standby mode, pressing any key or picking up the remote control will wake up the system. An incoming call will also wake up the system. If the system does not respond, check that all equipment is powered on. If the equipment is ...
-
TANDBERG D50104-15 - page 31
Health Care System III 31 Getting Started # OK zoom 1 5 * 7 4 3 2 9 6 8 0 P + - store presets delete move pip mic off selfview far end vcr aux doc cam main cam snapshot pc abc wxyz tuv pqrs jkl ghi def mno P 1 P 3 P 2 m e n u c o n n e c t d i r e c t o r y d i s c o n n e c t Quick Keys The three buttons on top of the remote control refer to the b ...
-
TANDBERG D50104-15 - page 32
32 Health Care System III Getting Started Menu Structure The on-screen menu structure is shown below . Press the M ENU key on the remote control to enter/leave the Main Menu. Press U P /D OWN /L EFT /R IGHT to navigate. Press O K to select. Call Quality Advanced Settings Main Menu MCU Services Audio Settings Presentations Vid e o Settings Utilities ...
-
TANDBERG D50104-15 - page 33
Health Care System III 33 Getting Started connect menu T HESE SETTINGS ARE ESSENTIAL FOR OPTIMAL SYSTEM SET - UP . NOTE System configuration • After the system has performed a self-test routine, product logo and a ‘W elcome’ menu will be displayed on the monitor . • Enabled but unused ISDN lines (lines not active) should be disabled. Select ...
-
TANDBERG D50104-15 - page 34
34 Health Care System III Getting Started LAN configuration • Press M ENU on the remote control. Select the menu ‘ T erminal Settings ’, then ‘ LAN Settings ’ . Specify the necessary LAN settings according to the instructions from your LAN administrator . If there is an H.323 Gatekeeper present on your LAN, see also ‘ H.323 Settings ’ ...
-
TANDBERG D50104-15 - page 35
Health Care System III 35 Getting Started connect Making and ending calls Making a call T o make a call, enter the number or the IP-address of the unit you wish to call using the Dialing keys and press C ONNECT . ISDN call The system will, by default, try to connect using Quality: Auto (see table overleaf). If the requested quality (bandwidth) cann ...
-
TANDBERG D50104-15 - page 36
36 Health Care System III Getting Started • Move the indicator to the desired bandwidth, then press the ‘ Select ’ Quick Key . • Y ou may also press the ‘ Set as Default ’ Quick Key in order to make the selected bandwidth the default bandwidth for subsequent calls. • Press ‘ Set Restrict (56k) ’ to make a restrict call. An indicat ...
-
TANDBERG D50104-15 - page 37
Health Care System III 37 Getting Started Selecting / setting default network T o select a specific network, press ‘ Net ’ when you are in the dial menu.: • Highlight network to be used in your call. •Press ‘ Select ’ to select network or press ‘ Set as Default ’ to set the selected network as your preferred choice for this and all ...
-
TANDBERG D50104-15 - page 38
38 Health Care System III Getting Started connect T o find an entry , key in the first letter , for example T , and scroll with the up/down arrows. T HE LEFT / RIGHT ARROWS WILL MOVE ONE P AGE UP / DOWN . T o dial the selected entry press C ONNECT . T o edit the selected number before dialing, press OK (only point-to-point entries) . Directory The ...
-
TANDBERG D50104-15 - page 39
Health Care System III 39 General Use Add New Entry When selecting ‘ Add New Entry ’, an empty directory entry is displayed: 1 Move to ‘ Name ’ and enter characters using the number keys on your remote control (as on mobile phones). Use ‘0’ to enter ‘space’, use ‘#’ to switch between upper - and lower case. 2 Move to ‘ Number ...
-
TANDBERG D50104-15 - page 40
40 Health Care System III General Use Add MultiSite Entry When selecting ‘ MultiSite Entry ’, an empty MultiSite directory entry is displayed: 1 Move to ‘ Name ’ and enter the MultiSite meeting name. 2 Select ‘ Add Site ’ to add a site to the meeting by searching for point-to-point entries in the directory list. See below for details. 3 ...
-
TANDBERG D50104-15 - page 41
Health Care System III 41 General Use mov e pip Press M OVE PIP to move your selfview as a Picture-in-Picture to dif ferent corners of the screen or to switch it off. Adjusting volume Press the V OLUME keys to adjust the volume level. An on-screen indicator will show the current level. V iew outgoing video (selfview) Press the S ELFVIEW key to view ...
-
TANDBERG D50104-15 - page 42
42 Health Care System III General Use zoom Controlling the Main Camera Moving / zooming camera T o control the Main Camera use the keys below: for pan/tilt and for zooming. Selecting video sources P r e s s : to select the video source to be transmitted to the far end. I F THE MENU SYSTEM IS ACTIVE , THE ARROW KEYS WILL NA VIGA TE IN THE MENUS . Fo ...
-
TANDBERG D50104-15 - page 43
Health Care System III 43 General Use V oice Activated Camera Positioning Through V oice Activated Camera Positioning and the use of two or three microphones, the camera will automatically view the speaker . Setup Before using camera tracking, the camera positions used must be stored at presets P7 (Mic1), P8 (Mic2) and/ or P9 (Mic3). E XAMPLE : T H ...
-
TANDBERG D50104-15 - page 44
44 Health Care System III General Use Presets The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store: • V ideo source • Camera position, pan/tilt/zoom/focus (if Main Camera) • Audio source selection (see ‘Audio Settings’ in ‘Advanced use’) Selecting presets T o select a pre-stored camera ...
-
TANDBERG D50104-15 - page 45
Health Care System III 45 General Use Sending/receiving still images When a still image is sent, received or requested, it will be stored in the graphics memory . When a new image is sent or received, the old image will be erased. When disconnecting the call, the image will be erased. Sending a still image • Press S NAPSHOT . • T o send a still ...
-
TANDBERG D50104-15 - page 46
46 Health Care System III General Use * - Optional feature. Duo V ideo * Duo V ideo is useful if you want to display live video from your document camera or another camera in addition to live video of yourself. Add Duo V ideo • Alt.1: Press any other video source than MainCam during a call. This will open Duo V ideo directly if the far end suppor ...
-
TANDBERG D50104-15 - page 47
Health Care System III 47 General Use End a Duo Video call T o end a Duo V ideo call, press D ISCONNECT . Select if you want to disconnect only the Duo V ideo connection or the whole connection. Controlling camera, changing video source, presets in a Duo V ideo call The main monitor will always display incoming video. The 2nd monitor will display o ...
-
TANDBERG D50104-15 - page 48
48 Health Care System III General Use MultiSite (MCU)* The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile). The video calls in a conference must be connected using the same bandwidth. A confer ...
-
TANDBERG D50104-15 - page 49
Health Care System III 49 General Use By connecting four MultiSite systems together , it is possible to connect up to 10 video sites (including the four MultiSite sites) plus 4 audio sites (telephones), see drawing below . The host can connect up to 3 other video systems with MultiSite functionality . The host can use V oice Switched or Continuous ...
-
TANDBERG D50104-15 - page 50
50 Health Care System III General Use • Press ‘ Add Site ’ to bring up the MultiSite dial menu. • Enter the number to call. The Quality will, by default, be the same as used by the first call. T o place a telephone call instead of a video call, press ‘ Quality ’ and select ‘ Te l e p h ’ in the Quality menu. T o use another network ...
-
TANDBERG D50104-15 - page 51
Health Care System III 51 General Use Disconnecting sites from a conference T o disconnect a site or end the conference, press D ISCONNECT . • Select site and press O K or ‘ Disconnect Site ’. T o end the meeting press ‘ Disconnect All ’. disconnect E ACH SYSTEM WILL BE IDENTIFIED BY A S YSTEM N AME ( IF SUPPOR TED ) AND THE NUMBER OF THE ...
-
TANDBERG D50104-15 - page 52
52 Health Care System III General Use PC SoftPresenter * PC SoftPresenter is used to display PC images on your system. The system and your PC must be connected to a LAN. In addition, VNC (V irtual Network Computing) server software must be installed on the PC. T o show the PC image: • Start the VNC software on your PC. • Press P C on your remot ...
-
TANDBERG D50104-15 - page 53
Health Care System III 53 General Use Web-interface It is possible to access and maintain the system remotely via a local area network (LAN) using a standard W eb-browser . Connect your system to a local area network. Configure your codec: • Press MENU, select ‘ T erminal Settings ’, ‘ LAN Settings ’ • Specify IP-assignment ‘ DHCP ’ ...
-
TANDBERG D50104-15 - page 54
54 Health Care System III General Use T .120 and other PC applications A PC can be connected to the system using a serial cable. This will enable interactive editing, file transfer and application sharing between two computers. Appropriate communication software should be used (for example: Microsoft NetMeeting, Intel ProShare Premier , W indows Hy ...
-
TANDBERG D50104-15 - page 55
Health Care System III 55 Advanced Use Main menu The menu system can be used to select available functions and utilities for the system. T o enter the menu system and the main menu, press the M ENU key . Y ou may leave the menu system at any time by pressing the M ENU key . T o navigate through the menu system, use the cursor keys to move the highl ...
-
TANDBERG D50104-15 - page 56
56 Health Care System III Advanced Use Call quality The Call Quality menu allows you to select the preferred quality of your call. D UE TO ACTIONS OR LIMIT A TIONS AT THE FA R END YOU MA Y NOT AL W A YS BE ABLE TO ACHIEVE THE SELECTIONS YOU W ANT . Audio Auto Optimized audio quality depending on bandwidth. High High audio quality (G722) regardless ...
-
TANDBERG D50104-15 - page 57
Health Care System III 57 Advanced Use Advanced call quality T HE SELECTIONS MADE IN THIS MENU WILL OVERRIDE THE SELECTIONS MADE IN THE ‘C ALL Q UALITY ’ MENU . I F ‘A UTO ’ IS SELECTED , THE SETTINGS IN ‘C ALL Q UALITY ’ WILL BE USED . Audio Auto The setting of ‘ Audio: Auto/High/Normal ’ i n ‘ Call Quality ’ will be used. G.72 ...
-
TANDBERG D50104-15 - page 58
58 Health Care System III Advanced Use Presentations Presentation Mode T o send a still image immediately after pressing S NAPSHOT select ‘ Presentation Mode: Normal ’. T o preview the image before it is transferred as a still image, select ‘ Presentation Mode: Pr eview ’. When pressing S NAPSHOT you will be allowed to view your still image ...
-
TANDBERG D50104-15 - page 59
Health Care System III 59 Advanced Use Utilities Autoanswer On : The system will automatically answer all incoming calls. On+MicOff : The system will automatically answer all incoming calls and switch the microphone of f when the call is connected. Press M IC O FF to switch the microphone on. Off : Y ou must manually answer all incoming calls by pr ...
-
TANDBERG D50104-15 - page 60
60 Health Care System III Advanced Use Welcome Menu The W elcome menu can be shown when the system is not in use, and when sleep-mode is not activated. On : The W elcome Menu is shown when the system is not in sleep mode. Off : The W elcome Menu is not shown. Continuous Presence On : The screen is divided into three or four squares, each displaying ...
-
TANDBERG D50104-15 - page 61
Health Care System III 61 Advanced Use System Name Identifies the system: • during an MCU conference call. • when using the W eb-interface. • when the codec is acting as an SNMP Agent. • towards a DHCP server . • as an H323 ID. Other systems can call us using this name instead of IP-number/IP-address. MCU services A Multipoint Control Uni ...
-
TANDBERG D50104-15 - page 62
62 Health Care System III Advanced Use T erminal Names Allows you to see the site numbers or name (if supported) of other sites connected in the conference. View site # * Allows you to view any participant in the conference other than the participant currently ‘On Air ’. End view Allows you to stop viewing the site previously chosen with ‘ V ...
-
TANDBERG D50104-15 - page 63
Health Care System III 63 Advanced Use Chair control * Y ou select ‘ Chair Control ’ and ‘ T ake Chair ’ to assume the role of chairman of the ‘meeting’. As chairman, you may control which site you and the other sites see. T ake chair Allows you to request chairmanship of the conference. If no one else is currently chairman the MCU will ...
-
TANDBERG D50104-15 - page 64
64 Health Care System III Advanced Use Audio Settings Audio Inputs By default, all inputs are enabled. Just plug in an audio source and it is active. Audio inputs that are On will automatically be mixed. Select Off to prevent audio/noise from unused inputs or if you want to disable a specific input. The activated audio sources are stored on presets ...
-
TANDBERG D50104-15 - page 65
Health Care System III 65 Advanced Use Level Settings Adjust the audio input levels according to which external audio equipment is connected. The on-screen audio level indicator will make it easier to set the correct input level settings. The input level should be adjusted so that the average level reaches the preferred level marker . The audio inp ...
-
TANDBERG D50104-15 - page 66
66 Health Care System III Advanced Use Level Settings - Outputs Adjust the audio output levels according to the parameters of the external audio equipment connected. These levels should only be adjusted when installing new audio equipment. The default settings are correct for the T ANDBERG Natural Audio module and for most consumer electronics devi ...
-
TANDBERG D50104-15 - page 67
Health Care System III 67 Advanced Use Automatic Gain Control (AGC) Settings Select ‘ On ’ to allow automatic adjustments (Automatic Gain Control) of audio levels. When ‘ On ’, the AGC maintains the audio signal level at a fixed value by attenuating strong signals and amplifying weak signals. V ery weak signals, i.e. noise alone, will not b ...
-
TANDBERG D50104-15 - page 68
68 Health Care System III Advanced Use Tips for improving the echo canceller performance: • Place all microphones as far as possible from the loudspeaker . Minimum loudspeaker -microphone distance should be 1 meter . • Place all microphones as close as possible to the persons speaking. By using several microphones, the ratio distance loudspeake ...
-
TANDBERG D50104-15 - page 69
Health Care System III 69 Advanced Use Camera T racking Mode Select the camera tracking mode: Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle images are preferred over close-up images. Norm: Should be used in regular meetings. Fast: The system quickly zooms in on a single person speaking. Suita ...
-
TANDBERG D50104-15 - page 70
70 Health Care System III Advanced Use Video Name Each video input defaults to the same name used on the remote control to select a video input. T o edit the name, use the number keys on the remote control to select letters. Press D ELETE to erase a letter . VGA Settings I F YOU SET ‘VGA O UT ’ TO ‘M AIN ’, MAKE SURE YOU HA VE A VGA- MONITO ...
-
TANDBERG D50104-15 - page 71
Health Care System III 71 Advanced Use Address The IP-address of the PC with the VNC software installed. T o find the IP-address of the PC, select ‘Command Prompt’ from the Startup-menu. T ype ‘ipconfig’ and press ENTER. Display Number The display number for VNC is 0 and upwards. If you are using W inVNC, double-click on the icon on the too ...
-
TANDBERG D50104-15 - page 72
72 Health Care System III Advanced Use Network Configuration Before using the system it is necessary to specify which network to use and define its settings. If you want to use your system via ISDN-BRI you should select ‘ Current Network: ISDN-BRI ’ and enter the ‘ ISDN-BRI Settings ’ menu to set the BRI parameters. If you want to use your ...
-
TANDBERG D50104-15 - page 73
Health Care System III 73 Advanced Use ISDN-BRI Settings M ANDA TORY ISDN-BRI SETTINGS T O MAKE SURE YOUR SYSTEM WILL WORK PROPERL Y USING ISDN-BRI, MAKE THE FOLLOWING SETTINGS : - S ET ISDN SWITCH TYPE - E NTER ISDN LINE NUMBERS (+ SPID S IF REQUIRED ) - D ISABLE UNUSED LINES ISDN Switch T ype Select the type of ISDN network connected to your unit ...
-
TANDBERG D50104-15 - page 74
74 Health Care System III Advanced Use Line Setup This menu allows you to program the numbers associated with your ISDN line. If you want to use this ISDN line, you need to set ‘ Enabled: On ’ and enter the numbers of your ISDN line. If some of the ISDN lines are not to be used, set ‘ Enabled: Off ’. Line 1 should always be enabled. Nationa ...
-
TANDBERG D50104-15 - page 75
Health Care System III 75 Advanced Use Advanced ISDN settings Subaddress Using a subaddress enables you to connect up to eight ISDN terminals to the same ISDN telephone number and line. The terminals are addressed by using dif ferent subaddresses. T o call a terminal with a Subaddress, separate the ISDN telephone number and the subaddress with a ? ...
-
TANDBERG D50104-15 - page 76
76 Health Care System III Advanced Use Send Own Numbers On The system will send its own numbers to the far end. Off The system will not send its own numbers to the far end, but please note that the network may still send your numbers to the far end. Sending Complete On The system will send the ISDN message information element ‘Sending Complete’ ...
-
TANDBERG D50104-15 - page 77
Health Care System III 77 Advanced Use Channel Hunting Below is a list of common ISDN-PRI/T1 switches. T ype Manufacturer PRI Switch T ype setting A TT 4 ESS A T&T A T&T ISDN A TT 5 ESS A T&T/Lucent A T&T ISDN or National ISDN * DMS 100 Northern T elecom National ISDN DMS 250 Northern T elecom National ISDN * Settings will depend on ...
-
TANDBERG D50104-15 - page 78
78 Health Care System III Advanced Use Advanced ISDN Settings This is the same menu as for ISDN-BRI. The settings will be common for ISDN BRI and ISDN PRI. Please refer to section ‘ISDN-BRI Settings’. Advanced ISDN-PRI Settings NSF - Non Standard Facility . Y our network provider may require a service selection in your ISDN configuration. Enter ...
-
TANDBERG D50104-15 - page 79
Health Care System III 79 Advanced Use External network settings Before using the system together with external network equipment, you must specify the network parameters on this page. T HE SYSTEM HAS SUPPOR T FOR UP TO 768 KBPS /2M BPS USING E XTERNAL N ETWORK (RS449/V .35/X.21) INTERF ACE . NOTE NOTE Leased E1/T1 Settings Network Interface Indica ...
-
TANDBERG D50104-15 - page 80
80 Health Care System III Advanced Use T O MAKE AN IP CALL WHEN ‘L EASED L INE ’ IS SELECTED , ENTER A NUMBER BEFORE PRESSING CONNECT TO ACTIV A TE THE DIAL MENU . TIP Call control ‘ RS366 Dialing ’ is the only dialing protocol and would normally be used together with network clocking ‘ RS449/V35 Compatible ’ when the external equipment ...
-
TANDBERG D50104-15 - page 81
Health Care System III 81 Advanced Use Address Address is defined as the IP-address of a streaming client, streaming server or a multicast address. Giving an address in the range 224.0.0.1-239.255.255.255 will broadcast the stream to any host that has joined the specified multicast group. Specifying normal broadcast address 255.255.255.255 will bro ...
-
TANDBERG D50104-15 - page 82
82 Health Care System III Advanced Use H.323 Settings E.164 alias This is the E.164 address of the codec. The E.164 address is equivalent to a telephone number , sometimes combined with access codes. V alid characters are 0-9,* and #. When using a gatekeeper the codec will send a message to the gatekeeper containing both the E.164 address and the s ...
-
TANDBERG D50104-15 - page 83
Health Care System III 83 Advanced Use IP Precedence Used to define which priority the system should have in the network. Higher numbers indicate higher priority . The selected value n will classify the different packets as follows: Signalling=n, Audio=n-1, V ideo=n-2, Data=n-3. When ‘Auto’ is selected, n has the value ‘6’. IP T ype of Serv ...
-
TANDBERG D50104-15 - page 84
84 Health Care System III Advanced Use NA T NA T , Network Address T ranslation, is used in small LAN’ s, often home offices, when a PC and a videoconferencing system is connected to a router with NA T support. NA T support in the videoconferencing system enables proper exchange of audio/video data when connected to an external videoconferencing ...
-
TANDBERG D50104-15 - page 85
Health Care System III 85 Advanced Use Ethernet Speed Auto The codec will auto-detect the speed/duplex on the LAN. 10/Half The codec will connect to the LAN using 10Mbps speed/Half Duplex. 10/Full 10 Mbps speed/Full Duplex. 100/Half 100 Mbps speed/Half Duplex. 100/Full 100 Mbps speed/Full Duplex. Restart Pressing the Quick key ‘Restart’ will re ...
-
TANDBERG D50104-15 - page 86
86 Health Care System III Advanced Use Call Settings Incoming MCU calls On : When you are in a call, the system will provide a visual/audio indication of an incoming call and ask you to accept/reject the call. Off : The system will not accept incoming calls when you are in a call. Incoming telephone calls On : The system will accept incoming teleph ...
-
TANDBERG D50104-15 - page 87
Health Care System III 87 Advanced Use Network Profiles This menu defines the settings listed when pressing the Quick key ‘ Net: ’ while in the dial menu. This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a profile, this prefix can be automatically added to the number being dialed. E XAMPLE ...
-
TANDBERG D50104-15 - page 88
88 Health Care System III Advanced Use Dataport configuration The system provides two standard RS 232 serial ports to allow a computer to be connected for data transfer and control purposes. W HEN CONNECTING TO A PC THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH RS232 CABLE . Dataport 1 If you wish to connect a PC to Dataport 1, you must ensure th ...
-
TANDBERG D50104-15 - page 89
Health Care System III 89 Advanced Use Dataport 2 Dataport 2 is dedicated to the main camera and will not be available in standard configuration. The Codec will automatically detect W A VE cameras. If you are using a camera supporting the VISCA protocol, select ‘ Mode: VISCA ’. Language The system supports 9 dif ferent languages for its on-scre ...
-
TANDBERG D50104-15 - page 90
90 Health Care System III Advanced Use Channel status Comprehensive information about the call progress is available through the Channel Status window . This window indicates the various stages each B-channel goes through whilst establishing a connection. Status - BRI Comments Idle the channel is idle Calling when calling — the network has acknow ...
-
TANDBERG D50104-15 - page 91
Health Care System III 91 Advanced Use Call status Comprehensive information about the call is available through the Call Status window . The menu has two columns, one for tranmitted and one for received audio/video/data information. If Duo V ideo or MultiSite is used, pressing the LEFT/RIGHT keys will show one page per connected site. Please conta ...
-
TANDBERG D50104-15 - page 92
92 Health Care System III Advanced Use T est subsystem Y ou can test the different subsystems of your videoconferencing equipment. Far End Loop (ISDN only) Set Local: This system will loop all incoming audio and video. · The far end will see its own video and hear its own audio. · The local side will see and hear the far end. An on-screen indicat ...
-
TANDBERG D50104-15 - page 93
Health Care System III 93 Appendix 1 Appendix 1 Connecting the HCS III to ISDN using Network Adapters Connecting When network terminating units are required, Inter-T el Inc. models NT1 or NT384 are installed within the enclosed area at the bottom of the cart, as illustrated below . Connect the ISDN BRI cables from the sockets labelled ISDN BRI 1/2/ ...
-
TANDBERG D50104-15 - page 94
94 Health Care System III Appendix 2 Appendix 2 Connecting the system to the Switched 56 network Using T elesync TS-256 SW56/ISDN adapter Connecting the system to the SW56 network using a T elesync Adapter is described below . NOTE: There are dif ferent T elesync Adapters for different configurations of SW56 networks. The network types tested with ...
-
TANDBERG D50104-15 - page 95
Health Care System III 95 Appendix 3 Appendix 3 Connecting the system to PRI/T1 Using CSU adapter Connecting the system to the ISDN network via the E1/T1-interface using an Adtran T1 ESF CSU ACE will allow up to 1.54 Mbps transmission. The E1/T1-interface must be connected to a CSU approved according to IEC 60950, UL 1950 or equivalent standard. Co ...
-
TANDBERG D50104-15 - page 96
96 Health Care System III Appendix 3 Configuration of Adtran T1 ESF CSU ACE Enter ‘2)CONFIG’ menu using SCROLL and ENTER buttons. - Enter ‘3)TERMINAL ’ menu. Check ‘1)FORMA T :ESF’, ‘2)CODE: B8ZS’ , ‘3)SET LBO: 0-133’ (Corresponding to ‘Cable Length’ setting on the Codec. - Go to main menu and enter ‘1)NETWORK’ menu. ‘ ...
-
TANDBERG D50104-15 - page 97
Health Care System III 97 Appendix 4 Appendix 4 Environmental considerations This section explains how to carry out basic adjustments and simple tests to ensure that you send and receive the best possible image and audio quality when using your system. Iris control and lighting By default the system camera will use an automatic iris to compensate f ...
-
TANDBERG D50104-15 - page 98
98 Health Care System III Appendix 5 Appendix 5 Using the file system It is possible to access a file system within the T ANDBERG system by using ftp: DOS-window: ftp <IP-address of codec>, or W eb-browser: ftp:// <IP-address of codec> Description of the different files all.prm - all settings in the system (including directory) dir .prm ...
-
TANDBERG D50104-15 - page 99
Health Care System III 99 Appendix 6 Appendix 6: Access Code The system will verify if the entered access code is valid by checking the code with the allowed codes listed in the ‘access.txt’ file on the ftp-server in the codec. If no ‘access.txt’ file is uploaded to the codec, registration of the code will be done without validation. E.g. y ...
-
TANDBERG D50104-15 - page 100
100 Health Care System III T echnical Description T echnical Description Function/Purpose: The T andberg Health Care System HCS III and HCS III Mobile are specially designed for use in a health care environment to provide: • Continuing Medical Education • Research and development • Consultation and clinical diagnosis • Administrative videoc ...
-
TANDBERG D50104-15 - page 101
Health Care System III 101 T echnical Description Bandwidth H.320 up to 2Mbps H.323 up to 3Mbps V ideo Standards H. 261, H.263, H.263+, H.263++ (Natural V ideo TF ) V ideo Features Picture in Picture (PIP) Intelligent V ideo Management TF V ideo Inputs 2 x S-V ideo, mini-DIN connector (Main camera uses S-V ideo Input #1) (Mobile cart uses S-V ideo ...
-
TANDBERG D50104-15 - page 102
102 Health Care System III T echnical Description MultiSite TF Features Any combination of IP & ISDN connections (transcoding) ISDN & IP Downspeeding TF at call set-up Dial in / Dial out capabilities Continuous Presence or V oice Switched 5 sites including min. 1 telephone call Built-in MultiSite TF audio bridge for up to 5 sites Duo V ideo ...
-
TANDBERG D50104-15 - page 103
Health Care System III 103 Abbreviations Abbreviations AGC Auto Gain Control Mic Microphone ARP Address Request Protocol MSN Multiple Subscriber Number Aux Auxiliary NA T Network Address T ranslator BNC Bayonet Connector NR Noise Reduction BRI Basic Rate Interface NSF Non Standard Facility CCD Char ge Couple Device NT Network T erminator CD Collisi ...
-
TANDBERG D50104-15 - page 104
104 Health Care System III Index Index Symbols 1TR6 19 A Abbreviations 103 Access Code 35 Add Duo V ideo 46 Add MultiSite Entry 40 Add New Entry 39 Adding an extra site 50, 51 Advanced call quality 57 Advanced ISDN settings 75 Advanced use 55 Alert Speaker 69 Audio inputs 64 outputs 65, 66 quality 56 setup 64 sources 64 Auto BRI Config 73 Autofocus ...
-
TANDBERG D50104-15 - page 105
Health Care System III 105 Index P Parallel dial 75 PC 14, 69 PC Presenter 52 PC SoftPresenter 52 Phantom power 64 Picture-in-Picture 41 PIP 41 Precautions 5, 19 Presentation Settings 61 Presentations 58 Preset buttons 44 Presets selecting 44 storing 44 Production of products 3 Q Quality 36 Quick keys 31 R Release chair 63 Release floor 62 Repackin ...
-
TANDBERG D50104-15 - page 106
106 Health Care System III Servicing Servicing Do not attempt to service the apparatus yourself, otherwise the warranty will be voided. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service Unplug the apparatus from the outlet and refer servicing ...
Do you have a question concerning TANDBERG D50104-15?
Use the form below
If you did not solve your problem by using a manual TANDBERG D50104-15, ask a question using the form below. If a user had a similar problem with TANDBERG D50104-15 it is likely that he will want to share the way to solve it.