English dropdown-ico

Manual SUPER MICRO Computer X9SPV-F

103 pages 7.55 mb
Download

Go to site of 103

Summary
  • SUPER MICRO Computer X9SPV-F - page 1

    X9SPV -F X9SPV -LN4F USER’S MANUAL Revision 1.0a ...

  • SUPER MICRO Computer X9SPV-F - page 2

    Manual Revision 1.0a Release Date: June 26, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective ...

  • SUPER MICRO Computer X9SPV-F - page 3

    iii Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X9SPV motherboard product series. This product is intended to be professionally installed and serviced by a technician. About This Motherboard The X9SPV motherboard serie ...

  • SUPER MICRO Computer X9SPV-F - page 4

    iv X9SPV Motherboard Series User ’s Manual Conventions Used in the Manual: Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself: Danger/Caution: Instructions to be strictly followed to prevent catastrophic system failure or to avoid bodily injury W ar ...

  • SUPER MICRO Computer X9SPV-F - page 5

    v Contacting Supermicro Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Computer B. ...

  • SUPER MICRO Computer X9SPV-F - page 6

    vi X9SPV Motherboard Series User ’s Manual T able of Contents Preface About This Manual ........................................................................................................ iii About This Motherboard ................................................................................................ iii Manual Organization ....... ...

  • SUPER MICRO Computer X9SPV-F - page 7

    vii T able of Contents 2-2 Motherboard Installation .................................................................................. 2-2 Installation Instructions .................................................................................... 2-3 2-3 System Memory .............................................................................. ...

  • SUPER MICRO Computer X9SPV-F - page 8

    viii X9SPV Motherboard Series User ’s Manual BIOS Write Protect (JWP1) ...................................................................... 2-23 CMOS Clear (JBT1) ................................................................................. 2-24 USB W ake-Up (JPUSB1) ......................................................................... ...

  • SUPER MICRO Computer X9SPV-F - page 9

    ix T able of Contents Option ROM Display Messages ................................................................. 4-4 Bootup Num-Lock ....................................................................................... 4-4 W ait For 'F1' If Error ................................................................................... 4-5 ...

  • SUPER MICRO Computer X9SPV-F - page 10

    x X9SPV Motherboard Series User ’s Manual Serial A T A Port 0~5 Hot Plug ................................................................... 4-12 Serial A T A Port 0~5 Spin Up Device ........................................................ 4-12  PCIe/PCI/PnP Conguration ................................................................. ...

  • SUPER MICRO Computer X9SPV-F - page 11

    xi Link Speed ............................................................................................... 4-23 W ake On LAN .......................................................................................... 4-23 Blink LEDs (Range 0-15 seconds) ........................................................... 4-23 Port Conguration Inf ...

  • SUPER MICRO Computer X9SPV-F - page 12

    xii X9SPV Motherboard Series User ’s Manual Restore User Defaults .............................................................................. 4-30 Boot Override ........................................................................................... 4-30 IBA IGE Slot 0100 v1381 ............................................................... ...

  • SUPER MICRO Computer X9SPV-F - page 13

    Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail and to provide you with the highest standards in quality and performance. Please check that the following i ...

  • SUPER MICRO Computer X9SPV-F - page 14

    1-2 X9SPV Motherboard Series User's Manual X9SPV -F/LN4F Image Note : All graphics and images shown in this manual were based upon the latest PCB Revision available at the time of publishing of the manual. The motherboard you've received may or may not look exactly the same as the image shown in this manual. ...

  • SUPER MICRO Computer X9SPV-F - page 15

    Chapter 1: Introduction 1-3 X9SPV -F/LN4F Motherboard Layout Important Notes to the User • Jumpers not indicated are for testing only . • See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front panel connections. • " " indicates the location of "Pin 1". 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C ...

  • SUPER MICRO Computer X9SPV-F - page 16

    1-4 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH ...

  • SUPER MICRO Computer X9SPV-F - page 17

    Chapter 1: Introduction 1-5 Jumper Description Default Setting JPB1 BMC (IPMI) Enable/Disable Pins 1-2 (Enabled) JBT1 CMOS Clear Open (Short pads to clear) JWD1 Watch Dog T imer Pins 1-2 (Reset) JWP1 BIOS Write Protect Pins 1-2 (Enabled) JPUSB1 USB Wake-up Pins 1-2 (Enabled) Jumper Descriptions Connectors/LED Description LED1 Standby Power LED LED2 ...

  • SUPER MICRO Computer X9SPV-F - page 18

    1-6 X9SPV Motherboard Series User's Manual Motherboard Features CPU Onboard, Mobile, 3rd generation Intel® Core™ i7/i5/i3 processor (FCBGA1023) Memory T wo (2) SO-DIMM slots support up to 16 GB of DDR3, unbuffered, 1066/1333 MHz, ECC SO-DIMM memory Supports One DIMM per Channel DIMM sizes ECC SO-DIMM 2 GB, 4 GB and 8GB Chipset Mobile Intel? ...

  • SUPER MICRO Computer X9SPV-F - page 19

    Chapter 1: Introduction 1-7 IPMI 2.0 Nuvoton WPCM450 BMC BIOS 16 MB SPI AMI BIOS ® SM Flash BIOS Plug and Play , ACPI 1.0/2.0/3.0, USB Keyboard and SMBIOS 2.3 Power ACPI/ACPM Power Management Main Switch Override Mechanism Suspend-T o-RAM (STR) One (1) Disk-On-Module (DOM) Power Connector Power-on mode for AC power recovery PC Health Monitoring CP ...

  • SUPER MICRO Computer X9SPV-F - page 20

    1-8 X9SPV Motherboard Series User's Manual Model/PN 3rd Gen IVB ECC Base Freq T urbo (1C/DC/QC) GHz C Core/Thread X9SPV -LN4F-3QE i7-3612QE 2.1 3.1/3.0/2.8 4C/8T X9SPV -LN4F-3LE i7-3555LE 2.5 3.2/3.1/NA 2C/4T X9SPV -F-3610ME i5-3610ME 2.7 3.3/3.1/NA 2C/4T X9SPV -F-3217UE i3-3217UE 1.6 NA/NA/NA 2C/4T Model/PN TDP Cache PCIex16 TXT VT -d VT -X A ...

  • SUPER MICRO Computer X9SPV-F - page 21

    Chapter 1: Introduction 1-9 Note: This is a general block diagram. Please see the Motherboard Features pages for details on the features of the motherboard. LPC 2X Sta c ked 2 po r t rea r I/O P/S2 COM1 ( rea r I/O) COM2 ( int e rnal h e ade r) NCT677 6F LPC I /O 4x S ATA POR TS GL AN2 82 574L 2.5GT /s PC Ie1 . 0_x1 DDR3 (C HA ) PCIe3.0_ x1 6 IMVP ...

  • SUPER MICRO Computer X9SPV-F - page 22

    1-10 X9SPV Motherboard Series User's Manual 1-2 Chipset Overview The X9 S PV Motherboard Series sup po r t s a sin gle o n boa rd, 3 rd g ene rat io n Intel ® Co re ™ i7 /i 5/ i3 p ro ce ss or (FCBGA1023 Mobile ECC CPU). Bui lt aro und t he f unc t ion ali t y and t he c ap abi lit y of t he In tel ® Q M77 E x pr es s chi pset , th e mot h ...

  • SUPER MICRO Computer X9SPV-F - page 23

    Chapter 1: Introduction 1-1 1 1-3 PC Health Monitoring This section describes the PC health monitoring features of the X9SPV Motherboard Series . These motherboards have an onboard System Hardware Monitor chip that supports PC health monitoring. Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond whe ...

  • SUPER MICRO Computer X9SPV-F - page 24

    1-12 X9SPV Motherboard Series User's Manual 1-4 Power Conguration Settings This section describes features of your motherboard that deal with power and power settings. Slow Blinking LED for Suspend-State Indicator When the CPU goes into a suspend state, the chassis power LED will start blinking to indicate that the CPU is in suspen ...

  • SUPER MICRO Computer X9SPV-F - page 25

    Chapter 1: Introduction 1-13 1-6 Super I/O The Super I/O provides two high-speed, 16550 compatible serial communication ports (UART s). Each UART includes a 16-byte send/receive FIFO, a programmable baud rate generator , complete modem control capability and a processor interrupt system. Both UART s provide legacy speed with baud rate of up to 1 15 ...

  • SUPER MICRO Computer X9SPV-F - page 26

    1-14 X9SPV Motherboard Series User's Manual Notes ...

  • SUPER MICRO Computer X9SPV-F - page 27

    Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic-Discharge (ESD) can damage electronic com ponents. T o pre - vent damage to your system board, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD. Precautions • Use a grounded ...

  • SUPER MICRO Computer X9SPV-F - page 28

    2-2 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH ...

  • SUPER MICRO Computer X9SPV-F - page 29

    Chapter 2: Installation 2-3 Installation Instructions Install the I/O shield into the chassis. Caution: T o avoid damaging the motherboard and its components, please do not use a force greater than 8 lb/inch on each mounting screw during motherboard installation. Locate the mounting holes on the motherboard. Refer to the layout on the previous page ...

  • SUPER MICRO Computer X9SPV-F - page 30

    2-4 X9SPV Motherboard Series User's Manual Installing and Removing DIMMs 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 ...

  • SUPER MICRO Computer X9SPV-F - page 31

    Chapter 2: Installation 2-5 Insert the SO DIMM module straight down. T o Remove: Use your thumbs to gently push the side clips near both ends away from the module. This should release it from the slot. Pull the SO DIMM module upwards. The SO DIMM Socket Position the SO DIMM module's bottom key so it aligns with the receptive point on the slot. ...

  • SUPER MICRO Computer X9SPV-F - page 32

    2-6 X9SPV Motherboard Series User's Manual I/O Port Locations and Denitions 2-4 Connectors/I/O Ports The I/O ports are color coded in conformance with the PC 99 specication. See the gure below for the colors and locations of the various I/O ports. Back Panel Connectors and I/O Ports 2 4 7 1 3 5 6 8 1. COM1 7. PS/2 Keyboard/Mouse 2. US ...

  • SUPER MICRO Computer X9SPV-F - page 33

    Chapter 2: Installation 2-7 Back Panel Connectors PS/2 KB/Mouse Port (KB/Mouse) The PS/2 keyboard/mouse port is lo - cated above the Back Panel USB Ports 8/9 on the motherboard. See the table at right for pin denitions. Keyboard/Mouse (For a keyboard cable or Mouse cable) Back Panel USB (2.0)#8 (For a Y cable that connects to a KB cable and a Mo ...

  • SUPER MICRO Computer X9SPV-F - page 34

    2-8 X9SPV Motherboard Series User's Manual Backpanel USB 4/5 Backpanel USB 8/9 USB 6/7 header USB 3.0 0/1 header USB 3.0 2/3 header Universal Serial Bus (USB) Four Universal Serial Bus ports (USB 4/5, 8/9) are located on the I/O backpanel. Additionally , one USB 2.0 header (USB 6/7) and two USB 3.0 headers (USB 0/1, 2/3) are also located on th ...

  • SUPER MICRO Computer X9SPV-F - page 35

    Chapter 2: Installation 2-9 Serial Ports (COM1/COM2) T wo COM connections (COM1, COM2) are located on the motherboard. COM1 is located on the back I/O panel. A COM2 header is also located just behind the COM1 port to provide an additional onboard serial port. See the table on the right for pin denitions. Serial Ports-COM1/COM2/COM3/COM4 Pin De? ...

  • SUPER MICRO Computer X9SPV-F - page 36

    2-10 X9SPV Motherboard Series User's Manual VGA Port/Connector 1 VGA Connector (VGA) A VGA connector is located next to the LAN Ports on the I/O back panel. This connector is used to provide video display . Refer to the board layout below for the location. 1 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPI ...

  • SUPER MICRO Computer X9SPV-F - page 37

    Chapter 2: Installation 2-1 1 LAN1/2 LAN3/4 IPMI 1 LAN Ports (LAN1~LAN4) T wo gigabit LAN ports are located on the I/O back panel (four on the X9SPV - LN4F). These ports accept RJ45 type cables. These are used to connect the motherboard to a network. On product models X9SPV-F and X9SPV -LN4F , an IPMI port is also provided for remote management thr ...

  • SUPER MICRO Computer X9SPV-F - page 38

    2-12 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 M ...

  • SUPER MICRO Computer X9SPV-F - page 39

    Chapter 2: Installation 2-13 Po we r Bu tto n OH/Fan Fail LE D 1 NIC1 LE D Re se t Butto n 2 HDD LE D Po we r LE D Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 X Gr ound NM I X Vc c NIC2 LE D X X Front Control Pa nel Pin Denitions Power LED The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin deni ...

  • SUPER MICRO Computer X9SPV-F - page 40

    2-14 X9SPV Motherboard Series User's Manual Po we r Bu tto n OH/Fan Fail LE D 1 NIC1 LE D Re se t Butto n 2 HDD LE D Po we r LE D Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 X Gr ound NM I X Vc c NIC2 LE D X X OH/Fan Fail LED Power Fail LED NMI Button Overheat (OH)/Fan Fail LED Connect an LED Cable to the OH/Fan Fail connection on pins 7 and 8 o ...

  • SUPER MICRO Computer X9SPV-F - page 41

    Chapter 2: Installation 2-15 Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. T o turn off the power when set to suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin denitions. Power Button Pin Denitions (JF1) Pi ...

  • SUPER MICRO Computer X9SPV-F - page 42

    2-16 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 M ...

  • SUPER MICRO Computer X9SPV-F - page 43

    Chapter 2: Installation 2-17 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH2 MH4 JD1 JF1 JP1 J ...

  • SUPER MICRO Computer X9SPV-F - page 44

    2-18 X9SPV Motherboard Series User's Manual Chassis Intrusion (JL1) A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable from the chassis to inform you of a chassis intrusion when the chassis is opened. Chassis Intrusion Pin Denitions (JL1) Pin# Denition 1 Intrusion Input 2 Ground 1 JWD1 UID VGA J ...

  • SUPER MICRO Computer X9SPV-F - page 45

    Chapter 2: Installation 2-19 C C 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH2 MH4 JD1 JF1 J ...

  • SUPER MICRO Computer X9SPV-F - page 46

    2-20 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 M ...

  • SUPER MICRO Computer X9SPV-F - page 47

    Chapter 2: Installation 2-21 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH2 MH4 JD1 JF1 JP1 J ...

  • SUPER MICRO Computer X9SPV-F - page 48

    2-22 X9SPV Motherboard Series User's Manual 2-6 Jumper Settings Explanation of Jumpers T o modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector . Pin 1 is identied with a square solder pad on the printed circuit board. ...

  • SUPER MICRO Computer X9SPV-F - page 49

    Chapter 2: Installation 2-23 BMC Enable/Disable (JPB1) JPB1 is used to enable or disable the BMC (Baseboard Management Control) chip and the onboard IPMI connec - tion. This jumper is used together with the IPMI settings in the BIOS. See the table on the right for jumper settings. Supported on both the X9SPV -F and X9SPV -LN4F . BMC IPMI Enable/Dis ...

  • SUPER MICRO Computer X9SPV-F - page 50

    2-24 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 M ...

  • SUPER MICRO Computer X9SPV-F - page 51

    Chapter 2: Installation 2-25 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH2 MH4 JD1 JF1 JP1 J ...

  • SUPER MICRO Computer X9SPV-F - page 52

    2-26 X9SPV Motherboard Series User's Manual W atch Dog Reset (JWD1) W atch Dog (JWD1) is a system monitor that can reboot the system when a software ap - plication hangs. Close pins 1~2 to reset the system if an application hangs. Close pins 2~3 to generate a non-maskable interrupt signal for the application that hangs. See the table on the ri ...

  • SUPER MICRO Computer X9SPV-F - page 53

    Chapter 2: Installation 2-27 LAN Port LEDs T wo LAN ports are located on the I/O Backpanel. Each Ethernet LAN port has two LEDs. The yellow Activity LED (right, see below) indicates activity , while the Link/ Speed LED (left) may be green, amber or off to indicate the speed of the connection. See the tables at right for more information. 2-7 Onboar ...

  • SUPER MICRO Computer X9SPV-F - page 54

    2-28 X9SPV Motherboard Series User's Manual 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 M ...

  • SUPER MICRO Computer X9SPV-F - page 55

    Chapter 2: Installation 2-29 1 JWD1 UID VGA JWP1:WRITE PROTECT PWR I2C U60 I-SA TA 0 I-SA TA 1 JVGA1 JIPMB1 T- SGPIO2 T- SGPIO1 JSD1 I-SA TA 5 I-SA TA 2 I-SA TA 4 I-SA TA 3 J1 J3 F6 JCOM2 J20USB1 SP1 LED2 LED1 LED3 U21 U7 U10 U22 U6 JDIMM1 JDIMM2 JCOM1 FA N2 FA N3 FA N1 FA N4 U26 JPW1 JPI2C1 JPK1 U3 JT PM 1 JLAN1 JLAN2 MH7 MH6 MH2 MH4 JD1 JF1 JP1 J ...

  • SUPER MICRO Computer X9SPV-F - page 56

    2-30 X9SPV Motherboard Series User's Manual Notes ...

  • SUPER MICRO Computer X9SPV-F - page 57

    3-1 Chapter 3: Troubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use t he fo llo win g pro c edu res to t ro ubl esh oot yo ur syst em. If yo u have fo llowe d all of the p ro c edur es b elo w and st il l nee d ass ist an ce, r efer to t he ‘ T ech nic al S upp or t Pro ce dur es’ and /or ‘ Retu rn ing M er cha ndi s ...

  • SUPER MICRO Computer X9SPV-F - page 58

    3-2 X9SPV Motherboard Series User's Manual 2. Us e the s pea ker to dete r mine i f any be ep c od es exi st. ( Refer to A p pen dix A for d eta ils o n bee p c ode s. ) 3. Rem ove all me mo r y mo dul es an d tur n o n the sys tem. (I f the a lar m is o n, ch ec k the s pec s o f mem or y mod ule s, re set t he me mo r y or t r y a d if fe re ...

  • SUPER MICRO Computer X9SPV-F - page 59

    3-3 Chapter 3: Troubleshooting Note: Not all BIOS can be ashed. Some cannot be ashed; it depends on the modications to the boot block code. 3. If yo u've f oll owed t he in str uc t ion s above to t ro ubl esh oot yo ur syste m, and stil l c anno t res ol ve the p rob le m, the n contact Supermic ro's t echnical suppor t and prov ...

  • SUPER MICRO Computer X9SPV-F - page 60

    3-4 X9SPV Motherboard Series User's Manual BIOS warning message and the information on how to update your BIOS on our web site. Select your motherboard model and download the BIOS (.rom) le to your computer . Also, check the current BIOS revision and make sure that it is newer than your BIOS before downloading. Y ou may choose the zip le ...

  • SUPER MICRO Computer X9SPV-F - page 61

    3-5 Chapter 3: Troubleshooting 3-4 Returning Merchandise for Service A rec ei pt or c opy of yo ur invoi ce m ar ked wi th t he date o f purc ha se is re qui red befo re any war r ant y se r v ic e wi ll be r end ere d. Y ou ca n obt ain s er v ic e by c alli ng your v endor for a R eturned Merchandise Authorization (RMA) nu mber . When retur ni ng ...

  • SUPER MICRO Computer X9SPV-F - page 62

    3-6 X9SPV Motherboard Series User's Manual Notes ...

  • SUPER MICRO Computer X9SPV-F - page 63

    Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X9SPV -F/LN4F Moth - erboard . The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens. Note: For instructions on BIOS recovery , pl ...

  • SUPER MICRO Computer X9SPV-F - page 64

    4-2 X9SPV -F/LN4F Motherboard User Manual How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility . From the main menu, you can access the other setup screens. An AMI BIOS identi? ...

  • SUPER MICRO Computer X9SPV-F - page 65

    Chapter 4: AMI BIOS 4-3 System Overview: The following BIOS information will be dis played: System Time/System Date Use this option to change the system time and date. Highlight System Time or Sys - tem Date using the arrow keys. Enter new values through the keyboard. Press the <T ab> key or the arrow keys to move between elds. The date mu ...

  • SUPER MICRO Computer X9SPV-F - page 66

    4-4 X9SPV -F/LN4F Motherboard User Manual 4-3 Ad vanced Setup Congurations Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items:  BOOT Feature Quiet Boot This option allows the bootup screen options to be modied between POST mes - sages or the OEM logo. Select Disabled to display the POST messages. Sele ...

  • SUPER MICRO Computer X9SPV-F - page 67

    Chapter 4: AMI BIOS 4-5 W ait For 'F1' If Error Thi s for ce s th e syste m to wait u ntil t he ' F1 ' key is pre ss ed i f an er ro r oc c ur s. Th e opti on s are D is abl ed an d Enabled . INT19 T rap Response The Interrupt 19 (INT19) feature determines how the BIOS will react to INT19 trap - ping by Option ROM. If set to Imm ...

  • SUPER MICRO Computer X9SPV-F - page 68

    4-6 X9SPV -F/LN4F Motherboard User Manual Active Processor Cores Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's web site for more information.) The options are All, 1, 2, and 3. Limit CPUID Maximum This feature allows the user to set the maximum CPU ID value. Enable this function to boot the legacy op ...

  • SUPER MICRO Computer X9SPV-F - page 69

    Chapter 4: AMI BIOS 4-7  CPU PPM Conguration Power T echnology This feature determines what power-saving scheme the motherboard uses. The options are Disabled, Energy Efcient and Custom. If Custom is selected, the following options become available: EIST EIST (Enhanced Intel SpeedStep T echnology) allows the system to automati - cally adju ...

  • SUPER MICRO Computer X9SPV-F - page 70

    4-8 X9SPV -F/LN4F Motherboard User Manual  Advanced Chipset Control W ARNING : Setting the wrong values in the following sections may cause the system to malfunction.  System Agent (SA) Conguration This submenu allows you to congure System Agent Parameters.  Memory Conguration This section displays memory status such as memory spe ...

  • SUPER MICRO Computer X9SPV-F - page 71

    Chapter 4: AMI BIOS 4-9 PEG0 ASPM Set this item to control ASPM (Active State Power Management) support for PEG: Device 1 Function 0. The options are Disabled, Auto , ASPM L0s, ASPM L1, and ASPM L0sL1. Enable PEG Use this feature to enable the PEG. The options are Disabled, Enabled, and Auto . De-emphasis Control This item sets the De-emphasis cont ...

  • SUPER MICRO Computer X9SPV-F - page 72

    4-10 X9SPV -F/LN4F Motherboard User Manual EHCI Hand-Off This item is for Operating Systems that do not support Enhanced Host Con - troller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed by the EHCI driver . The settings are Enabled and Disabled . XHCI Pre-Boot Driver This feature enables support for the xHCI pre-boo ...

  • SUPER MICRO Computer X9SPV-F - page 73

    Chapter 4: AMI BIOS 4-1 1 SLP_S4 Assertion Width Use this feature to select a minimum assertion width of the SLP_S4 signal. The options are Disabled, 1-2 Seconds, 2-3 Seconds, 3-4 Seconds, and 4-5 Seconds .  IDE/SA T A Conguration When this submenu is selected, the AMI BIOS automatically detects the presence of the SA T A Devices and displays ...

  • SUPER MICRO Computer X9SPV-F - page 74

    4-12 X9SPV -F/LN4F Motherboard User Manual RAID Mode The following items are displayed when RAID Mode is selected: Serial A T A Port 0~5 Hot Plug Set this item to Enabled to enable hot-plugging for the particular port. The options are Enabled and Disabled . Serial A T A Port 0~5 Spin Up Device Set this item to Enabled to enable device spin-up suppo ...

  • SUPER MICRO Computer X9SPV-F - page 75

    Chapter 4: AMI BIOS 4-13 Maximum Payload This feature selects the setting for the PCIE maximum payload size. The options are Auto, 128 Bytes , and 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes. Maximum Read Request This feature selects the setting for the PCIE maximum Read Request size. The options are Auto, 128 Bytes , 256 Bytes, 51 ...

  • SUPER MICRO Computer X9SPV-F - page 76

    4-14 X9SPV -F/LN4F Motherboard User Manual Maximum Read Request This feature selects the setting for the PCI Express maximum Read Request size. The options are Auto, 128 Bytes , 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes . ASPM Support Set this item to the desired ASPM (Active State Power Management) level. The options are Disable ...

  • SUPER MICRO Computer X9SPV-F - page 77

    Chapter 4: AMI BIOS 4-15 Conguration Request, permitting access to Extended Functions in an ARI device immediately below the port. The options are Disabled and Enabled. AtomicOp Requester Enable (A vailable when supported by the hardware) When set to Enabled, this feature initiates AtomicOp requests only if Bus Mas - ter Enable bit is in the Com ...

  • SUPER MICRO Computer X9SPV-F - page 78

    4-16 X9SPV -F/LN4F Motherboard User Manual Compliance SOS (Available when supported by the hardware) When set to Enabled, this feature will force L TSSM to send SKP ordered sets between sequences when sending compliance pattern or modied compliance pattern. The options are Disabled and Enabled. Hardware Autonomous Width (Available when supported ...

  • SUPER MICRO Computer X9SPV-F - page 79

    Chapter 4: AMI BIOS 4-17 Ipv6 PXE Support This feature enables Ipv6 boot support. If disabled, an Ipv6 PXE boot option will not be created. The options are Enabled and Disabled .  Super IO Device Conguration  Serial Port 1 Conguration / Serial Port 2 Conguration Serial Port 1 / Serial Port 2 Select Enabled to enable the onboard seria ...

  • SUPER MICRO Computer X9SPV-F - page 80

    4-18 X9SPV -F/LN4F Motherboard User Manual  Remote Access Conguration COM1, COM2, SOL Console Redirecti on Use this feature to enable console redirection for COM1, and COM2 ports. The options are Enabled and Disabled. The default for COM1 and COM2 is Disabled . The default for SOL is Enabled .  Console Redirection Settings This feature all ...

  • SUPER MICRO Computer X9SPV-F - page 81

    Chapter 4: AMI BIOS 4-19 Flow Control This feature allows the user to set the ow control for Console Redirection to prevent data loss caused by buffer overow . Send a "Stop" signal to stop send - ing data when the receiving buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty . The ...

  • SUPER MICRO Computer X9SPV-F - page 82

    4-20 X9SPV -F/LN4F Motherboard User Manual  Console Redirection Settings (for EMS) This feature allows the user to specify how the host computer will exchange data with the client computer , which is the remote computer used by the user . Out-of-Band-Mgmt Port Use this feature to select the port for out-of-band management. The options are COM1 , ...

  • SUPER MICRO Computer X9SPV-F - page 83

    Chapter 4: AMI BIOS 4-21 ACPI Sleep State This setting allows you to congure the ACPI (Advanced Conguration and Power Interface) sleep state for your system when it is in the Suspend mode. The options are Suspend Disabled, S1 only (CPU Stop Clock), S3 only (Suspend to RAM), and Both S1 and S3 available for OS to choose from . S3 (Suspend to R ...

  • SUPER MICRO Computer X9SPV-F - page 84

    4-22 X9SPV -F/LN4F Motherboard User Manual Add an Attempt The settings on this section are setup parameters to connect to a remote iSCSI device. iSCSI Attempt Name - assigns a unique name to this attempt. iSCSI Mode - select Enabled or Disabled Connection Retry Count - if the initial connection fails or times out, this is how many times an attempt ...

  • SUPER MICRO Computer X9SPV-F - page 85

    Chapter 4: AMI BIOS 4-23 Intel(R) 82579LM / Intel(R) 82574L Gigabit Network Connection  NIC Conguration Link Speed Use this feature to select the link speed to be used. The options are AutoNeg , 10 Mbps Half, 10 Mbps Full, 100 Mbps Half and 100 Mbps Full. W ake On LAN Use this feature to activate the W ake On LAN (WOL) feature. The options ar ...

  • SUPER MICRO Computer X9SPV-F - page 86

    4-24 X9SPV -F/LN4F Motherboard User Manual  Change SmBIOS Event Log Settings Smbios Event Log Change this item to enable or disable all features of the Smbios Event Log - ging during boot. The options are Enabled and Disabled. Erase Event Log This option erases all logged events. The options are No , Y es, Next reset and Y es, Every reset. When ...

  • SUPER MICRO Computer X9SPV-F - page 87

    Chapter 4: AMI BIOS 4-25 4-5 IPMI Settings Intelligent Platform Management Interface (IPMI) is a set of common interfaces that IT administrators can use to monitor system health and to manage the system as a whole. For more information on the IPMI specications, please visit Intel's website at www .intel.com.  System Event Log This featur ...

  • SUPER MICRO Computer X9SPV-F - page 88

    4-26 X9SPV -F/LN4F Motherboard User Manual Log EFI Status Codes This option enables or disables the logging of Extensible Firmware Interface (EFI) status codes. The options are Disabled, and Enabled .  BMC Network Conguration Set this feature to congure the IPMI LAN adapter with a network address. Update IPMI LAN Conguration This featur ...

  • SUPER MICRO Computer X9SPV-F - page 89

    Chapter 4: AMI BIOS 4-27 4-6 Boot Use th is fea ture to c o ng ure B oot S et tin gs: Setup Prompt Timeout Use this feature to enter the number of seconds to wait for setup activation key . The default setting is 1 second. Boot Options Priorities This feature allows the user to specify which devices are boot devices and the order of priority fro ...

  • SUPER MICRO Computer X9SPV-F - page 90

    4-28 X9SPV -F/LN4F Motherboard User Manual 4-7 Security Settings • If the Administrator password is dened ONL Y - this controls access to the BIOS setup ONL Y . • If the User's password is dened ONL Y - this password will need to be entered during each system startup or boot, and will also have Administrator rights in the setup. • ...

  • SUPER MICRO Computer X9SPV-F - page 91

    Chapter 4: AMI BIOS 4-29 4-8 Exit Select the Exit tab from the BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system conguration, and reboot the computer . Select Discard Changes and Exit from the Exit menu and press < ...

  • SUPER MICRO Computer X9SPV-F - page 92

    4-30 X9SPV -F/LN4F Motherboard User Manual Restore Defaults T o set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are factory settings designed for maximum system stability , but not for maximum performance. Save As User Defaults T o set this feature, select Save as User Defaults from the Exit menu and pres ...

  • SUPER MICRO Computer X9SPV-F - page 93

    Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes This section lists POST (Power On Self T est) error beep codes for the AMI BIOS. POST error beep codes are divided into two categories: recoverable and terminal. This section lists Beep Codes for recoverable POST errors. Recoverable POST Error Beep Codes Whe n a rec over ab le t ...

  • SUPER MICRO Computer X9SPV-F - page 94

    A-2 X9SPV Motherboard Series User's Manual Notes ...

  • SUPER MICRO Computer X9SPV-F - page 95

    B-1 X9SPV Motherboard Series User's Manual Appendix B Software Installation Instructions B-1 Installing Drivers Additional drivers and tools for your motherboard are available for download at the Supermicro website. T o install these software programs and drivers, run the application and a screen will appear as below . Click the icons to the r ...

  • SUPER MICRO Computer X9SPV-F - page 96

    B-2 X9SPV Motherboard Series User's Manual Supero Doctor III Interface Display Screen-I (Health Information) B-2 Conguring Supero Doctor III The Supero Doctor III program is a Web-base management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called the SD ...

  • SUPER MICRO Computer X9SPV-F - page 97

    B-3 X9SPV Motherboard Series User's Manual Supero Doctor III Interface Display Screen-II (Remote Control) Note : SD III Software Revision 1.0 can be downloaded from our Web site at: ftp://ftp.supermicro.com/utility/Supero_Doctor_III/. Y ou can also download SDIII User's Guide at: http://www .supermicro.com/PRODUCT/ Manuals/SDIII/UserGuide ...

  • SUPER MICRO Computer X9SPV-F - page 98

    B-4 X9SPV Motherboard Series User's Manual Notes ...

  • SUPER MICRO Computer X9SPV-F - page 99

    Appendix C: UEFI BIOS Recovery C-1 Appendix C UEFI BIOS Recovery Instructions W arning! Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIO ...

  • SUPER MICRO Computer X9SPV-F - page 100

    C-2 X9SPV Motherboard Series User ’s Manual Note : At this point, you may decide if you want to start with BIOS Recov - ery . If you decide to proceed with BIOS Recovery , follow the procedures below . a USB CD/DVD ROM/R W device can be used for this purpose. However , a USB Hard Disk drive cannot be used for BIOS recovery at this time. T o perfo ...

  • SUPER MICRO Computer X9SPV-F - page 101

    Appendix C: UEFI BIOS Recovery C-3 5. When the screen as shown above displays, using the arrow key , select the item- "Proceed with ash update" and press the <Enter> key . Y ou will see the progress of BIOS Recovery as shown in the screen below . Note: Do not interrupt the process of BIOS ashing until it is com - pleted. 6. Af ...

  • SUPER MICRO Computer X9SPV-F - page 102

    C-4 X9SPV Motherboard Series User ’s Manual 8. When a DOS prompt appears, enter AMI.BA T BIOSname.### at the prompt. Note: Do not interrupt this process until BIOS ashing is completed. 9. After seeing the message that BIOS update is completed, unplug the AC pow - er cable from the power supply to clear CMOS, and then plug the AC power cable in ...

  • SUPER MICRO Computer X9SPV-F - page 103

    Disclaimer The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signicant injury or loss of lif ...

Manufacturer SUPER MICRO Computer Category Personal Computer

Documents that we receive from a manufacturer of a SUPER MICRO Computer X9SPV-F can be divided into several groups. They are, among others:
- SUPER MICRO Computer technical drawings
- X9SPV-F manuals
- SUPER MICRO Computer product data sheets
- information booklets
- or energy labels SUPER MICRO Computer X9SPV-F
All of them are important, but the most important information from the point of view of use of the device are in the user manual SUPER MICRO Computer X9SPV-F.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SUPER MICRO Computer X9SPV-F, service manual, brief instructions and user manuals SUPER MICRO Computer X9SPV-F. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SUPER MICRO Computer X9SPV-F.

Similar manuals

A complete manual for the device SUPER MICRO Computer X9SPV-F, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SUPER MICRO Computer X9SPV-F by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SUPER MICRO Computer X9SPV-F.

A complete SUPER MICRO Computer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SUPER MICRO Computer X9SPV-F - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SUPER MICRO Computer X9SPV-F, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SUPER MICRO Computer X9SPV-F, that we can find in the current document
3. Tips how to use the basic functions of the device SUPER MICRO Computer X9SPV-F - which should help us in our first steps of using SUPER MICRO Computer X9SPV-F
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SUPER MICRO Computer X9SPV-F
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SUPER MICRO Computer X9SPV-F in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SUPER MICRO Computer X9SPV-F?

Use the form below

If you did not solve your problem by using a manual SUPER MICRO Computer X9SPV-F, ask a question using the form below. If a user had a similar problem with SUPER MICRO Computer X9SPV-F it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)