English dropdown-ico

Manual Code Alarm CA611

13 pages 0.04 mb
Download

Go to site of 13

Summary
  • Code Alarm CA611 - page 1

    CA61 1 Owners Manual CAUTION! Be certain that the vehicle is outdoors before using this or any re- mote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is garaged. ...

  • Code Alarm CA611 - page 2

    Page 2 Y our Remote S tart Alarm System has many features and available options some of which are selected at time of installation. Consult your installing dealer for options that may have been installed and are not listed. ARMING THE SYSTEM: 1. T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk. 2. Press and release the A ...

  • Code Alarm CA611 - page 3

    ARMING THE SYSTEM: If the passive arming feature has been selected: T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk. The LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun. If the dash mounted LED does not begin to flash rapidly , then you have left a door , hood, or trunk ajar ...

  • Code Alarm CA611 - page 4

    Page 4 DISARMING THE SYSTEM: As you approach the vehicle, press and release the Disarm button on the transmitter . The parking light s will flash 2 times, the siren/horn will chirp 2 times, and the LED will turn off. If you have the optional door lock/unlock circuit installed, the doors will unlock. If you have the optional entry illumination circu ...

  • Code Alarm CA611 - page 5

    Page 5 zone. For additional information, refer to INTRUSION WARNING SIGNALS (page 5) of this manual. NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter button is activated, the drivers door only will unlock, pressing the unlock button a second time will cause all doors to unlock. If your transmitter has a spe ...

  • Code Alarm CA611 - page 6

    Page 6 V ALET MODE: The valet button allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature, remote door locks and remote start will remain operational. 1. Enter ...

  • Code Alarm CA611 - page 7

    Page 7 1. Disarm the system by use of the transmitter , or by use of the emergency override sequence. Turn the ignition switch to the ON position. 2. Within 10 seconds, press and release the valet/override button 3 times. 3. Within 10 seconds turn the ignition switch OFF , ON, OFF , ON, OFF , ON. (The siren/horn will sound and the lights will flash ...

  • Code Alarm CA611 - page 8

    5. Within 10 seconds, begin to press and release the push button switch to set the tenths digit. (As per example press and release 5 times to set the tenths digit to 5) 6. Within 10 seconds of the last press of the button, turn the ignition OFF then ON. 7. Within 10 seconds, Begin to press and release the button to set the units digit. (As per exam ...

  • Code Alarm CA611 - page 9

    new code tenths for step 2 above, and units for step 5 above. ELIMINA TING THE NORMAL ARM/DISARM CHIRPS Y ou can selectively eliminate the normal arm and disarm chirps by holding the transmitter button slightly longer when arming or disarming. This will prevent the siren/horn chirps for one arm or disarm cycle. T o eliminate the chirps permanently: ...

  • Code Alarm CA611 - page 10

    REMOTE ST ARTING THE VEHICLE: Press and release the option button of your transmitter 2 times within 2 seconds to activate the remote start system. The vehicle will start and remain running for the pre-programmed 10 o r 15 minutes. As a visual indication, the parking lights will flash or turn on depending on the programming set up by your installa- ...

  • Code Alarm CA611 - page 11

    ADDITIONAL REMOTE FUNCTION CHANNEL 3/TRUNK: The system has an additional feature (Channel 3) that can be connected to the T runk Release. T o operate the accessory associated with channel 3, press and hold the trunk button of your transmitter for 4 seconds. ADDITIONAL REMOTE FUNCTION CHANNEL 4: The system has an additional feature (Channel 4) that ...

  • Code Alarm CA611 - page 12

    ALARM DASH MOUNTED LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = A RME D OFF = DISARMED ON SOLID = V ALET MODE 2 FLASH...SOLID = REMOTE ST AR T V ALET MODE 3 FLASH...P AUSE = INTRUSION ZONE 3 2 FLASH...P AUSE = INTRUSION ZONE 2 1 FLASH...P AUSE = INTRUSION ZONE 1 ALARM SIREN/HORN CHIRP INDICA TION 1 CHIRP = ARM 2 CHIRPS = DISARME ...

  • Code Alarm CA611 - page 13

    Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING ...

Manufacturer Code Alarm Category Remote Starter

Documents that we receive from a manufacturer of a Code Alarm CA611 can be divided into several groups. They are, among others:
- Code Alarm technical drawings
- CA611 manuals
- Code Alarm product data sheets
- information booklets
- or energy labels Code Alarm CA611
All of them are important, but the most important information from the point of view of use of the device are in the user manual Code Alarm CA611.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Code Alarm CA611, service manual, brief instructions and user manuals Code Alarm CA611. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Code Alarm CA611.

Similar manuals

A complete manual for the device Code Alarm CA611, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Code Alarm CA611 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Code Alarm CA611.

A complete Code Alarm manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Code Alarm CA611 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Code Alarm CA611, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Code Alarm CA611, that we can find in the current document
3. Tips how to use the basic functions of the device Code Alarm CA611 - which should help us in our first steps of using Code Alarm CA611
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Code Alarm CA611
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Code Alarm CA611 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Code Alarm CA611?

Use the form below

If you did not solve your problem by using a manual Code Alarm CA611, ask a question using the form below. If a user had a similar problem with Code Alarm CA611 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)