English dropdown-ico

Manual Land Pride RC5015

336 pages 7.93 mb
Download

Go to site of 336

Summary
  • Land Pride RC5015 - page 1

    Rotary Cutters RC5015, RCM5015, RC6015 & RCM6015 15678 318-047P Parts Manual Read the Operator's manual entirely . When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Y our life and the lives of others depend on it! © Copyright 2009 Printed 02/03/09 Cover photo may show optional equip ...

  • Land Pride RC5015 - page 2

    Section 1: Introduction .................................................8 Using This Manual ...............................................................8 Manual Replacement Inf or mation .......................................8 Manual Re visions ................................................................8 T ouch-up P aint ................. ...

  • Land Pride RC5015 - page 3

    Hydraulic Wing Lift .....................................................148 Maunal Winch Wing Dec k Accessor y .........................150 Section 8: Labels ...................................................152 Label Placement ........................................................152 Section 9: Options ......................................... ...

  • Land Pride RC5015 - page 4

    Hydraulic Cylinder Wing (810-312C) Cross ....................304 Hydraulic Cylinder Wing (810-312C) Midwa y ..................306 Hydraulic Independent Wing Control Accessor y .............308 Hydraulic V alve Selector Assessor y ................................310 Hydraulic V alve Spool Control Accessor y .......................312 Hydraulic Wing ...

  • Land Pride RC5015 - page 5

    RC5015 & RC6015 SERIES (540 RPM) A Axle Center Dual (S/N 489025-) ..................................26 Axle Center Dual (S/N 489026+) ..................................28 Axle Center Single (S/N 489025-) ................................30 Axle T andem Center Deck (S/N 419602 to 489025) .....32 Axle T andem Center Deck (S/N 489026+) ............ ...

  • Land Pride RC5015 - page 6

    RCM5015 & RCM6015 SERIES (1000 RPM) A Axle Center Dual (S/N 489025-) .....................................180 Axle Center Dual (S/N 489026+) ....................................182 Axle Center Single (S/N 489025-) ...................................184 Axle T andem Center Deck (S/N 419602 to 489025) .......186 Axle T andem Center Deck (S/N 4890 ...

  • Land Pride RC5015 - page 7

    S Shredder Kit Comer (S/N 235492+) ...........................324 Shredder Kit Omni (S/N 235491-) ..............................326 Shredder Kit Omni (S/N 235491-) ..............................328 W Wing T ur nbuc kle and T ranspor t Bar ...........................178 T able of Contents P ar t Number Index Alphabetiz ed T ab le of Contents (contin ...

  • Land Pride RC5015 - page 8

    8 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index ...

  • Land Pride RC5015 - page 9

    02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 9 T able of Contents P ar t Number Index ...

  • Land Pride RC5015 - page 10

    16969 10 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Blade Carrier Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 11

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2. Standard Blade Quantity 2 per RH Wing CUTTER BLADE 1/2X ...

  • Land Pride RC5015 - page 12

    15338 12 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Center Section (540 RPM) (RC50 Series Only S/N 217473-) Applies to RC5015 ...

  • Land Pride RC5015 - page 13

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 540 RPM 318-026L Includes items 26 par t no. 826-174C, 27, 33 & 34 ASSY . SUB CENTER SECT .540 RPM 318-073S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HHCS 1/2-13X1 1/2GR5 802-629C 3. W ASHER LOCK SPRING 3/4 PL T 804-023C ...

  • Land Pride RC5015 - page 14

    16924 14 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Center Section (540 RPM) (S/N 217474+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 15

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5. WLDMT . SKID SHOE RH. 318-145H 6. DIVBX.RCD101HD 1 3/4-20 1:1.21 ...

  • Land Pride RC5015 - page 16

    Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RC6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29. HHCS 1/2-13X1 GR5 802-258C 30. W ASHER FLA T 1/2 SAE PL T 804-016C 31. Rev . 4 (S/N 468 ...

  • Land Pride RC5015 - page 17

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 17 T able of Contents P ar t Number Index Section 2: Decks Land Pride RC5015 & RC6015 SERIES (540 RPM) Dec k Center Section (540 RPM) (S/N 217474+) (continued) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 18

    15340 18 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Wing Section (540 RPM) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 19

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15340 LH Wing Shown DEFLECT OR 318-087D 1. DEFLECT OR GREEN 318-087D81 1. DEFLECT OR RED 318-087D82 1. RH Wing DEFLECT OR 318-086D 1. DEFLECT OR GREEN 318-086D81 1. DEFLECT OR RED 318-086D83 1. Rev . 2 not compat. w/Rev . 1. (S/N 292792+) RC5015 WLDMT . WING SECTION RH. 31 ...

  • Land Pride RC5015 - page 20

    Revision Comments P ar t Description P ar t No. Ref. HHCS 3/4-10X2 GR5 802-064C 9. Re v . 2 not compat. w/Rev . 1. (S/N 325492+) SHIELD WELDMENT 318-400H 10. Rev . 1 (S/N 325491-) SHIELD WELDMENT 312-399H 10. WASHER FLA T 3/8 SAE PL T 804-012C 11. KNOB 3/8-16 FEMALE THD 2 3/8OD 817-259C 12. NUT WING 3/8-16 PL T 803-231C 12. W ASHER LOCK SPRING 3/8 ...

  • Land Pride RC5015 - page 21

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 21 T able of Contents P ar t Number Index Section 2: Decks Land Pride RC5015 & RC6015 SERIES (540 RPM) Dec k Wing Section (540 RPM) (continued) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 22

    15351 22 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Hitch Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 23

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4. NUT HEX T OP LOCK 1-8 PL T 803-168C 5. Rev . 2 not compat. w/Rev .1 (S/N 419602+) WLD ...

  • Land Pride RC5015 - page 24

    15488 24 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Wing T urnbuc kle and T ranspor t Bar Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 25

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4. PIN COTTER 3/16 X 1 1/2 PL T 805-104C 5. W ASHER FLA T 1 SAE 804-029C 6. WLDMT . CY ...

  • Land Pride RC5015 - page 26

    15376 26 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Dual (S/N 489025-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 27

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2. HHCS 1-8X9 GR5 802-110C 3. NUT HEX T OP LOCK 1-8 PL T 803-168C 4. (S/N 223259-) WLDMT . ...

  • Land Pride RC5015 - page 28

    23962 28 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Dual (S/N 489026+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 29

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLO TTED 3/4-16 803-053C 5. W ASHER HARDENED .81ID 804-216C 6. BEARING CONE LM-67048 822-021C 7. HUB 5-BOL T W/CUPS/STUDS 815-243C 8. S ...

  • Land Pride RC5015 - page 30

    15384 30 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Single (S/N 489025-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 31

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1 (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Re v . 1 (S/N 222149-) HHCS ...

  • Land Pride RC5015 - page 32

    22084 32 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle T andem Center Dec k (S/N 419602 to 489025) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 33

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5. HHCS 1-8X6 GR5 802-357C 6. HHCS 1/2-13X3 1/4 GR5 802-099C 7. HHCS 1-8X9 GR5 802- ...

  • Land Pride RC5015 - page 34

    23964 34 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle T andem Center Dec k (S/N 489026+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 35

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4. Optional W/ #4 GREASE ZERK 1/4-28 THD FORMING 800-080C 5. HHCS 1-8X7 GR5 802-075C 6. HHCS 1/2-13 ...

  • Land Pride RC5015 - page 36

    15352 36 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Wing (S/N 489025-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 37

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15352 (S/N 223259-) WLDMT . WING AXLE LH. 318-011H 1. (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. HHCS 1-8X6 GR5 802-357C 4. HUB GREASE CAP 200-001D 5. NUT HEX SLO TTED 7/8-14 PL T 803-029C 6. W ASHER SPINDLE - 7/8 804-055C 7. BEAR ...

  • Land Pride RC5015 - page 38

    23963 38 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Wing (S/N 489026+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 39

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. WASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6. HUB 5-BOL T W/CUPS/STUDS 815-243C 7. SEAL 1.75ID CR17617 816-497C 8. P ...

  • Land Pride RC5015 - page 40

    15410 40 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck (S/N 292791-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 41

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5. Includes items 1 through 5 & 14 ASSY . CG. FRT . CENTER LH.OUTER 318-048K 6. HHCS ...

  • Land Pride RC5015 - page 42

    19019 42 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck (S/N 292792 T o 419601) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 43

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . CTR. LH. 318-321K 6. HHCS 3/8-16X ...

  • Land Pride RC5015 - page 44

    22135 44 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck (S/N 419602+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 45

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . CTR. LH. 318-321K 6. HHCS 3/8-16X ...

  • Land Pride RC5015 - page 46

    15690 46 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck Double Chains (S/N 292791-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 47

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY . CG. REAR CENTER 318-070K 5. NUT HEX WHIZ 1/2-13 PL T 803-037C 6. RHSNB 1/2-13X3 1/2 GR5 PL ...

  • Land Pride RC5015 - page 48

    19020 48 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck Double Chains (S/N 292792 T o 419601) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 49

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY . CG. REAR CENTER 318-070K 5. NUT HEX WHIZ 1/2-13 PL T 803-037C 6. RHSNB 1/2-13X3 1/2 GR5 PL T 8 ...

  • Land Pride RC5015 - page 50

    22136 50 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center Deck Double Chains (S/N 419602+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 51

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5. RHSNB 1/2-13X1 1/4 GR5 802-214C 6. RC5015 CEN FRONT DBLCHAIN RH 318- ...

  • Land Pride RC5015 - page 52

    15436 52 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Wing Deck (S/N 292791-) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 53

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15436 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. CG. WING FRONT OUTER LH. 318-100D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5. Includes items 1 through 5 ASSY . CG. FRT . WING OUTER LH. 318-061K 6. CG. WING ...

  • Land Pride RC5015 - page 54

    19018 54 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Wing Deck (S/N 292792+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 55

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19018 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. RC5015 WING CHAINGU ARD LH 318-327D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . WING LH. 318-323K 6. Includes it ...

  • Land Pride RC5015 - page 56

    23952 56 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Center (826-478C) Comer (S/N 461935 to 461937, 468573+) Applies to RC6015 ...

  • Land Pride RC5015 - page 57

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.150.726 4. COMER ROLL PIN, INNER TUBE 190.000.016 5. COMER INNER Y OKE 151.016.031.1 6. COM ...

  • Land Pride RC5015 - page 58

    15570 58 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Center 540 RPM (826-183C) Eur ocardan Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 59

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15570 PT O INT . CA T .4 540W/CLUTCH 826-183C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 Y OKE ASSEMBL Y (TRACT OR END) 1106525 1. CROSS ASSEMBL Y 1006020 2. OUTER TUBE Y OKE 1706027 3. 10 X 80-DIN-148 ROLL PIN 6331080 4. EC TUBE JACK SHAFT 1528014D 5. RPBY 15 ...

  • Land Pride RC5015 - page 60

    16965 60 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Center 540 RPM (826-260C) W alter scheid (S/N 461934-) Applies to RC6015 ...

  • Land Pride RC5015 - page 61

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16965 PT O INT . W2500/WSC CA T5 540 826-260C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CR OSS & BEARING KIT 2500 312209 2. WS INBOARD Y OKE 2500 097140 3. WS SPRING PIN 10 X 90 304046 4. WS OUTER PROFILE S5 391709 5. WS FRICTION CLUTCH 391708 6. WS HEX BOL T M16 X ...

  • Land Pride RC5015 - page 62

    18548 62 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v . 540 RPM (826-112C) W alterscheid (S/N 214515+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 63

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18548 PT O 2500 X 39.76 NO CLUTCH 826-112C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL Q.D . 2500 097136 2. WS CR OSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4. WS SPRING PIN 10 X 90 304046 5. WS INNER PROFILE 2400 321256 6. WS PROF ...

  • Land Pride RC5015 - page 64

    16736 64 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v . 540 RPM (826-188C) EC New Shields Applies to RC5015 ...

  • Land Pride RC5015 - page 65

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-112C 826-188C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHIELD 750MM 1877075 6. EC OUTER TUBE SHIELD 750MM 1876075 7. EC TUBE BEARING ...

  • Land Pride RC5015 - page 66

    15569 66 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v . 540 RPM (826-188C) EC Old Shields Applies to RC5015 ...

  • Land Pride RC5015 - page 67

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15569 RPBY 826-112C 826-188C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5. EC OUTER TUBE (1528084) 840MM 1528085 6. EC OUTER TUBE Y OKE ...

  • Land Pride RC5015 - page 68

    26857 68 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV 540 RPM (826-117C) W alter scheid (S/N 214515 to 336516 & 388671 to 468557) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 69

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26857 PT O CV 2580 X 41.73 826-117C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL 363617 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4. WS CROSS & BEARING KIT 2500 384316 5. WS INBOARD Y OKE 2500 097140 6. WS SPRING PIN 10 X 90 304046 7. WS ...

  • Land Pride RC5015 - page 70

    16732 70 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV 540 RPM (826-181C) EC New Shields Applies to RC5015 ...

  • Land Pride RC5015 - page 71

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16732 RPBY 826-117C 826-181C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHIELD 680MM 1877068 6. EC OUTER TUBE SHIELD 680MM 1876068 7. EC SHORT CONE 18 ...

  • Land Pride RC5015 - page 72

    15512 72 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV 540 RPM (826-181C) EC Old Shields Applies to RC5015 ...

  • Land Pride RC5015 - page 73

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15512 RPBY 826-117C 826-181C Rev . 2 Service only EC CV JOINT 1 3/8-6 SPLINE 7106622 1. Rev . 1 RPBY 7106622 7600602 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3. EC TUBE BEARING (OLD STYLE) 1786009 4. EC OUTER TUBE (1528084) 780MM 1548078 5. DECAL D ...

  • Land Pride RC5015 - page 74

    19897 74 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV 540 RPM (826-336C) W alter scheid (S/N 336516 to 388670) Applies to RC5015 ...

  • Land Pride RC5015 - page 75

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19897 Driveline CV W alterscheid (540 RPM) 826-336C WS Y OKE 1 3/8-6 SPL 363617 1. WS DOUBLE Y OKE 2500 365725 2. WS GREASE ZERK 020672 3. WS INBOARD Y OKE S4 331573 4. WS CROSS & BEARING KIT 2500 384316 5. WS SPRING PIN 10 X 90 304046 6. WS IN PROFILE (330162) 800MM 3 ...

  • Land Pride RC5015 - page 76

    23947 76 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to 547835) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 77

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23947 PT O CV V80 X 54.8 NO CLUTCH 826-476C * COMER COLLER Y OKE ASSEMBL Y 141.028.358.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.472.1 3. COMER OUTER Y OKE 141.028.248.1 4. COMER OUTER TUBE R OLL PIN 190.000.243 5. COMER WIPE ...

  • Land Pride RC5015 - page 78

    23994 78 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV Joint (540 RPM) (7106622) Eur ocardan Applies to RC5015 ...

  • Land Pride RC5015 - page 79

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23994 Service Only EC 1 3/8" Z6PULL COLLAR 7106622 EC PULL TYPE Y OKE 1006875 1. EC GO6 CROSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4. Rev . 2 EC PULL COLLAR KIT EV OLUTION 1004227 5. Rev . 1 RPBY 1004227 1004225 ...

  • Land Pride RC5015 - page 80

    15513 80 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline CV Joint (540 RPM) (7600602) Eur ocardan Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 81

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-6 SPLINE 7600602 EC Y OKE ASSY . 1 3/8-6 SPLINE 1000618 1. EC EC SPIDER ASSEMBL Y 1000630 2. EC SEMI MALE SUPPORT 1700600 3. EC BEARING RING 1700603 4. EC GUIDE DISK 1720602 5. EC SEMI FEMALE SUPPORT 1700601 6. EC CONICAL KNURLED WASHER 6402608 7. E ...

  • Land Pride RC5015 - page 82

    23957 82 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch (146.264.024.1) Comer Applies to RC6015 ...

  • Land Pride RC5015 - page 83

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4. COMER CLUTCH SUPPORT 151.018.228.1 5. COMER INNER PLA TE 180.019.014 6. COMER INTERMEDIA TE PLA TE ...

  • Land Pride RC5015 - page 84

    23958 84 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch (146.284.020.1) Comer Applies to RC6015 ...

  • Land Pride RC5015 - page 85

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4. COMER CLUTCH SUPPORT 151.018.228.1 5. COMER INNER PLA TE 180.019.014 6. COMER INTERMEDIA TE PLA TE ...

  • Land Pride RC5015 - page 86

    17005 86 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch (383805) W altersc heid Applies to RC6015 ...

  • Land Pride RC5015 - page 87

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5. WS THRUST PLA TE 381495 6. WS BELLEVILLE SPRING 043489 7. WS HEX NUT M8 381957 8. WS BRIDGE 186397 ...

  • Land Pride RC5015 - page 88

    16947 88 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch 540 RPM (391708) W altersc heid Applies to RC6015 ...

  • Land Pride RC5015 - page 89

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16947 WS FRICTION CLUTCH 391708 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5. WS THR UST PLA TE 381495 6. WS BELLEVILLE SPRING 043489 7. WS HEX NUT M8 381957 8. 02/03/09 RC5015 ...

  • Land Pride RC5015 - page 90

    15521 90 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch 540/1000 RPM (1446016) EC Applies to RC5015 ...

  • Land Pride RC5015 - page 91

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5. EC INNER DISK 1138008 6. EC HUB WITH FLANGE 1708016 7. Includes nut and ...

  • Land Pride RC5015 - page 92

    23996 92 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Wing (826-185C) EC New Shielding Applies to RC5015 ...

  • Land Pride RC5015 - page 93

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHEILD 1877901 6. RPBY 1877901 1877111 6. EC OUTER TUBE SHEILD ...

  • Land Pride RC5015 - page 94

    15567 94 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Wing (826-185C) EC Old Shielding Applies to RC5015 ...

  • Land Pride RC5015 - page 95

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC 1380MM INNER TUBE 1526121 5. EC 1380MM OUTER TUBE 1528121 6. EC OUTER TUBE Y OKE 1706027 7. EC ...

  • Land Pride RC5015 - page 96

    17004 96 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Wing (826-262C) W alter scheid (S/N 461934-) Applies to RC6015 ...

  • Land Pride RC5015 - page 97

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4. WS SPRING PIN 10 X 90 304046 5. WS INBOARD Y OKE 2500 097140 6. WS PROFILE & ...

  • Land Pride RC5015 - page 98

    23953 98 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Wing (826-481C) Comer (S/N 461935 to 461937, 468573+) Applies to RC6015 ...

  • Land Pride RC5015 - page 99

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE R OLL PIN 190.000.243 4. COMER WIPER 180.018.437 5. COMER TUBE OUTER 1522805450710 6. COMER CLUTCH, D ...

  • Land Pride RC5015 - page 100

    15500 100 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-174C) RC6015 (826-231C) OMNI Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 101

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15500 RC5015 GBO X RC130S 1.75-20 1:1.46 CW 826-174C RC6015 GBO X RC130L 1.75-20 1:1.46 CW 826-231C RC5015 (826-174C) OMNI HOUSING RC130S CW 010156 1. RC6015 (826-231C) OMNI HOUSING RC-130LS 010167 1. OMNI INPUT CAP 020211 2. OMNI OUTPUT PINION, 13T 030417 3. OMNI GEAR INP ...

  • Land Pride RC5015 - page 102

    15506 102 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-175C) RC6015 (826-232C) OMNI Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 103

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15506 RC5015 GBO X RC130S 1.75-20 1:1.46 CCW 826-175C RC6015 GBO X RC130L 1.75-20 1:1.46 CCW 826-232C RC5015 (826-175C) OMNI HOUSING RC130C CCW 010157 1. RC6015 (826-232C) OMNI HOUS. RC-130LS REV . RO T . 010168 1. OMNI BLANK CAP 020212 2. OMNI OUTPUT PINION, 13T 030417 3. ...

  • Land Pride RC5015 - page 104

    21167 104 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-315C) RC6015 (826-320C) Comer Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 105

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RC5015 GBO X RC50 1.75-20 1:1.46 CCW 826-315C RC6015 GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5015 (826-315C) CO HOUSING U0.125.0531.00 1. RC6015 (826-320C) CO HOUSING UO .125.0532.00 1. CO CRO WN GEAR Z22 M8 U0.125.5005.00 2. CO BEARING 30209 R T A25 8.0.9.00143 3. ...

  • Land Pride RC5015 - page 106

    21266 106 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-315C) RC6015 (826-320C) Eurocar dan Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 107

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RC5015 GBO X RC50 1.75-20 1:1.46 CCW 826-315C RC6015 GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5015 (826-315C) HOUSING 16571-01 1. RC6015 (826-320C) HOUSING 16572-01 1. BEVEL GEAR Z22 M8 17271-03 2. BEVEL PINION Z15 M8 17271-04 3. INPUT SHAFT 1 3/4" Z20 12171-03 ...

  • Land Pride RC5015 - page 108

    21171 108 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-316C) RC6015 (826-321C Comer Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 109

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RC5015 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6015 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5015 (826-316C) CO HOUSING U0.125.0531.00 1. RC6015 (826-321C) CO HOUSING U0.125.0532.00 1. CO CROWN GEAR Z22 M8 U0.125.5005.00 2. CO BEARING 30209 R T A25 8.0.9.00143 3. CO O ...

  • Land Pride RC5015 - page 110

    21267 110 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 540 RPM RC5015 (826-316C) RC6015 (826-321C) Eurocar dan Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 111

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RC5015 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6015 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5015 (826-316C) HOUSING 16571-01 1. RC6015 (826-321C) HOUSING 16571-01 1. BEVEL GEAR Z22 M8 17271-03 2. BEVEL PINION Z15 M8 17271-04 3. INPUT SHAFT 1 3/4" Z20 12171-03 4. ...

  • Land Pride RC5015 - page 112

    19604 112 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x Divider 540 RPM (826-179C) Comer Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 113

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19604 DIV OMNI/CO 540RPM 1 3/4-20 826-179C CO BOL T M10 X 35 8.8 8.1.1.00109 1. TOP CO VER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.2.01772 4. CO OIL SEAL 45 X 85 X 10 8.7.3.00331 5. CO CASING 0.305.0300.01 6. CO SHIM 84.7 0.709.7500. ...

  • Land Pride RC5015 - page 114

    15503 114 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x Divider 540 RPM (826-179C) OMNI Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 115

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15503 DIV OMNI/CO 540RPM 1 3/4-20 826-179C * OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI PINION, 20T 030413 5. OMNI GEAR, 24T 030412 6. OMNI OUTPUT SHAFT ,1.75-20SHORT 040121 7. OMNI INPUT S ...

  • Land Pride RC5015 - page 116

    15427 116 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Center Lift Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 117

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5015 & RCM5015 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6015 & RCM6015 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3. EL 3/4MJIC 3/4MORB 811-063C 4. Re v . 2 not compat. w/Rev . 1. (S/N 2 ...

  • Land Pride RC5015 - page 118

    25899 118 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder (810-150C) Red Lion Applies to RC5015 ...

  • Land Pride RC5015 - page 119

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5. PLUG 9/16-18UNF MORB SOCKET HD 186561 6. Only Found in Kit #20 MON ROD SE ...

  • Land Pride RC5015 - page 120

    25900 120 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder (810-162C) Red Lion Applies to RC6015 ...

  • Land Pride RC5015 - page 121

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5. LION PLUG 3/4-16UNF SOCKET HD 186562 6. Only F ound in Kit #20 MON ROD SEA ...

  • Land Pride RC5015 - page 122

    25902 122 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder (810-312C) Red Lion) Applies to RC6015 ...

  • Land Pride RC5015 - page 123

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4. Only F ound in Kit #18 MON ROD SEAL N/A 5. Only F ound in Kit #18 MON PISTON SEAL (PSP ...

  • Land Pride RC5015 - page 124

    12499 124 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder (810-624C) Midwa y Applies to RC5015 ...

  • Land Pride RC5015 - page 125

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4. MW TUBE 3 X 8 CYLINDER 5M4116 5. MW CAPSCREW 2A0006 6. MW CLEVIS STD . DUTY 1M6010 7. MW N ...

  • Land Pride RC5015 - page 126

    25896 126 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder (810-624C) Red Lion Applies to RC5015 ...

  • Land Pride RC5015 - page 127

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4. Only found in seal kit #19 MON ROD SEAL N/A 5. Only found in seal kit #19 MON PIST ON ...

  • Land Pride RC5015 - page 128

    12499 128 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Center (810-195C) Midwa y Applies to RC5015 ...

  • Land Pride RC5015 - page 129

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4. MW TUBE 3 X 8 CYLINDER 5M4116 5. MW CAPSCREW 2A0006 6. MW CLEVIS STD . DUTY 1M6010 7. MW NU ...

  • Land Pride RC5015 - page 130

    11421 130 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Center Lift (810-162C) Cr oss Applies to RC6015 ...

  • Land Pride RC5015 - page 131

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CR OSS 2A0236-9 2. Only av ailable in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4. TIE ROD CR OSS 1D0009-1050 5. CROSS SCREW , CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. CROSS ...

  • Land Pride RC5015 - page 132

    11421 132 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Center Lift (810-162C) Midwa y Applies to RC6015 ...

  • Land Pride RC5015 - page 133

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only av ailable in Seal Kit (#19) O-RING 3. MW R OD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5. MW CAPSCREW 2A0006 6. MW CLEVIS PIN 2A0208 7. MW PIN CLIP 2A0132 8. MW CLE ...

  • Land Pride RC5015 - page 134

    15572 134 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Wing (810-150C) Cr oss Applies to RC5015 ...

  • Land Pride RC5015 - page 135

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE ROD CR OSS 2A0578-1675 4. TUBE CROSS 1D0005-1450 5. CROSS SCREW , CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. ...

  • Land Pride RC5015 - page 136

    15572 136 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Wing (810-150C) Midwa y Applies to RC5015 ...

  • Land Pride RC5015 - page 137

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. ROD MW TIE 7M3320 4. MW TUBE 5M3120 5. MW CAPSCREW 2A0006 6. MW CLEVIS PIN 2A0208 7. MW PIN CLIP 2A0132 8. MW CLEVIS STD . DUTY 1M60 ...

  • Land Pride RC5015 - page 138

    15572 138 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Wing (810-312C) Cr oss Applies to RC6015 ...

  • Land Pride RC5015 - page 139

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 CYL 3X12X1.25 ROD (TIE R OD 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4. TUBE CROSS 1D0005-1450 5. CROSS SCREW CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. CROSS PIN ...

  • Land Pride RC5015 - page 140

    15242 140 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Cylinder Wing (810-312C) Midwa y Applies to RC6015 ...

  • Land Pride RC5015 - page 141

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 CYL 3X12X1.25 ROD (TIE R OD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW ROD 1-1/4 DIA. X 10 STR OKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA. 4M4104 4. MW TUBE 3 X 15 CYLINDER 5M4120 5. MW BASE 3 X 9/16 SAE 6M4152 6. MW TIE ROD 3 X 10 CYLINDE ...

  • Land Pride RC5015 - page 142

    25519 142 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Independent Wing Contr ol Accessor y Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 143

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25519 HYDRA ULIC WING CONTROL ASSY . 318-316A * AD 9/16MJIC 811-315C 1. CP 3/4FORB MALE QD POPPET TYPE 811-394C 2. HH3/8R1 162 3/4MORB 9/16 FJIC 811-633C 3. 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 143 T able of Contents P ar t Number Index Se ...

  • Land Pride RC5015 - page 144

    19893 144 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic V alve Selector Assessory Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 145

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 2-W A Y SELECTOR VL V KIT 312-316A HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 1. AD 1/2FNPTS 3/4MORB 811-021C 2. SELECT OR V AL VE 3-W A Y 2 POS 810-152C 3. AD 3/4MORB 3/4MJIC 811-088C 4. HH3/8R2 60 1/2MNPT 3/4FJIC 811-360C 5. 02/03/09 RC5015, RCM5015, RC6015 & RCM601 ...

  • Land Pride RC5015 - page 146

    11196 146 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic V alve Spool Contr ol Accessory Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 147

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 3-SPOOL V AL VE KIT 312-315A 3-SPOOL DIRECTION CONTR OL V AL V 810-167C 1. HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 2. AD 3/4MJIC 1/2FNPT 811-290C 3. EL 3/4MJIC X 3/4MNPT 811-359C 4. EL 1/2MNPT 1/2FNPTS 811-008C 5. HH3/8R2 60 1/2MNPT 3/4FJIC 811-360C 6. CROSS SEAL KIT 2 ...

  • Land Pride RC5015 - page 148

    15426 148 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic Wing Lift Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 149

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 RC5015 & RCM5015 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6015 & RCM6015 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/16 9/16MJIC 9/16MORB 811-337C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3. HH1/4R1 066 9/16FJIC 811-309C 4. TE 9/16MJIC BH 9/16MJIC 9/16M ...

  • Land Pride RC5015 - page 150

    25515 150 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Maunal Winch Wing Deck Accessory Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 151

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25515 MECHANICAL WINCH 318-271A * WLDMT . WINCH 318-256H 1. HHCS 3/8-16X1 3/4 GR5 802-023C 2. HHCS 5/8-11X1 3/4 GR5 802-053C 3. NUT LOCK 3/8-16 PL T 803-013C 4. NUT HEX T OP LOCK 5/8-11 PL T 803-271C 5. W ASHER FLA T 3/8 USS PL T 804-011C 6. W ASHER LOCK SPRING 3/8 PL T 80 ...

  • Land Pride RC5015 - page 152

    17564 152 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RC5015 & RC6015 SERIES (540 RPM) Label Placement Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 153

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17564 RC5015 DECAL P ACKA GE 318-101A RCM5015 DECAL P ACKA GE 318-102A RC6015 DECAL P ACKA GE 318-183A RCM6015 DECAL P ACKA GE 318-184A DECAL W ARNING PINCH PT/CRUSH 818-045C 1. DECAL W ARNING OPERA TING ANGLE 818-276C 2. DECAL D ANGER PTO DRIVELINE 818-552C 3. DECAL D ANG ...

  • Land Pride RC5015 - page 154

    Revision Comments P ar t Description P ar t No. Ref. DECAL D ANGER PTO DRIVELINE 818-552C 30. DECAL IMPORT ANT - SLIP CLUTCH 818-680C 31. FOLDING CUTTER SPEED WARNING 838-588C 32. 154 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RC5015 & RC6015 SERIES ...

  • Land Pride RC5015 - page 155

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 155 T able of Contents P ar t Number Index Section 8: Labels Land Pride RC5015 & RC6015 SERIES (540 RPM) Label Placement (continued) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 156

    20659 156 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Baffle Shreader Kit Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 157

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg20659 ASSY .BAFFLE/SHRD OMNI RC5015 318-311A ASSY .BAFFLE/SHRD COMER RC5015-6015 318-395A ASSY .BAFFLE/SHRD OMNI RC6015 318-436A (Shown)318-311A OMNI 5015 WELDMENT BLADE CARRIER OMNI 318-302H 1. 318-395A COMER 5015 WELDMENT BLADE CARRIER COMER 318-396H 1. 318-436A OMNI 601 ...

  • Land Pride RC5015 - page 158

    23949 158 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit Comer (S/N 235492+) Applies to RC5015, RC6015 ...

  • Land Pride RC5015 - page 159

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23949 ASSY 50/6015 SHREDDER COMER 318-949A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER COMER 318-396H 2. ASSY CCW BLADES 59.5 COMER 318-946S 3. ASSY CCW BLADES 71.5 COMER 318-947S 4. ASSY CW BLADES 59.5 COMER 318-948S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HEX ...

  • Land Pride RC5015 - page 160

    23950 160 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit Omni (S/N 235491-) Applies to RC5015 ...

  • Land Pride RC5015 - page 161

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23950 ASSY 5015 SHREDDER OMNI 318-953A * WELDMENT BLADE CARRIER 318-302H 1. BLADE BUSHING 318-309D 2. ASSY CCW BLADES 59.5 OMNI 50 318-950S 3. ASSY CCW BLADES 71.5 OMNI 50 318-951S 4. ASSY CW BLADES 59.5 OMNI 50 318-952S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HEX T O ...

  • Land Pride RC5015 - page 162

    23951 162 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit Omni (S/N 235491-) Applies to RC6015 ...

  • Land Pride RC5015 - page 163

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23951 ASSY 6015 SHREDDER OMNI 318-957A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER OMNI 318-435H 2. ASSY CCW BLADES 59.5 OMNI 60 318-954S 3. ASSY CCW BLADES 71.5 OMNI 60 318-955S 4. ASSY CW BLADES 59.5 OMNI 60 318-956S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HE ...

  • Land Pride RC5015 - page 164

    16969 164 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Blade Carrier Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 165

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2. Standard Blade Quantity 2 per RH Wing CUTTER BLADE 1/2X ...

  • Land Pride RC5015 - page 166

    15338 166 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Center Section (1000 RPM) (RCM50 Series Only S/N 217473-) Applies to RCM5015 ...

  • Land Pride RC5015 - page 167

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 1000 RPM 318-029L Includes items 26 par t no . 826-177C, 27, 33 & 34 ASSY . SUB CENTER SEC.1000 RPM 318-082S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HHCS 1/2-13X1 1/2GR5 802-629C 3. W ASHER LOCK SPRING 3/4 PL T 804-023C ...

  • Land Pride RC5015 - page 168

    16924 168 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Center Section (1000 RPM) (S/N 217474+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 169

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5. WLDMT . SKID SHOE RH. 318-145H 6. DIVBX.RCD101HD 1 3/4-20 1.3:1 ...

  • Land Pride RC5015 - page 170

    Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RCM6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29. HHCS 1/2-13X1 GR5 802-258C 30. W ASHER FLA T 1/2 SAE PL T 804-016C 31. Rev . 2 1 3/4 - ...

  • Land Pride RC5015 - page 171

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 171 T able of Contents P ar t Number Index Section 2: Decks Land Pride RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Center Section (1000 RPM) (S/N 217474+) (continued) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 172

    15340 172 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Wing Section (1000 RPM) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 173

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15340 LH Wing Shown DEFLECT OR 318-087D 1. DEFLECT OR GREEN 318-087D81 1. DEFLECT OR RED 318-087D83 1. RH Wing DEFLECT OR 318-086D 1. DEFLECT OR GREEN 318-086D81 1. DEFLECT OR RED 318-086D83 1. Rev . 2 not compat. w/Rev . 1. (S/N 292792+) RCM5015 WLDMT . WING SECTION RH. 3 ...

  • Land Pride RC5015 - page 174

    Revision Comments P ar t Description P ar t No. Ref. GBO X RCM60 1:1.21 CW RED 826-324C83 8. RCM6015 RH (S/N 325491-) GBO X RC130L 1.75-20 1:1.21 CCW 826-235C 8. HHCS 3/4-10X2 GR5 802-064C 9. Rev . 2 not compat. w/Rev . 1. (S/N 325492+) SHIELD WELDMENT 318-400H 10. Re v . 1 (S/N 325491-) SHIELD WELDMENT 312-399H 10. W ASHER FLA T 3/8 SAE PL T 804-0 ...

  • Land Pride RC5015 - page 175

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 175 T able of Contents P ar t Number Index Section 2: Decks Land Pride RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Wing Section (1000 RPM) (continued) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 176

    15351 176 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Hitch Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 177

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4. NUT HEX T OP LOCK 1-8 PL T 803-168C 5. Rev . 2 not compat. w/Rev .1 (S/N 419602+) WLD ...

  • Land Pride RC5015 - page 178

    15488 178 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Wing T urnbuc kle and T ranspor t Bar Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 179

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4. PIN COTTER 3/16 X 1 1/2 PL T 805-104C 5. W ASHER FLA T 1 SAE 804-029C 6. WLDMT . CY ...

  • Land Pride RC5015 - page 180

    15376 180 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center Dual (S/N 489025-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 181

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2. HHCS 1-8X9 GR5 802-110C 3. NUT HEX TOP LOCK 1-8 PL T 803-168C 4. (S/N 223259-) WLDMT . C ...

  • Land Pride RC5015 - page 182

    23962 182 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center Dual (S/N 489026+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 183

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLOTTED 3/4-16 803-053C 5. W ASHER HARDENED .81ID 804-216C 6. BEARING CONE LM-67048 822-021C 7. HUB 5-BOL T W/CUPS/STUDS 815-243C 8. SE ...

  • Land Pride RC5015 - page 184

    15384 184 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center Single (S/N 489025-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 185

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1 (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Re v . 1 (S/N 222149-) HHCS ...

  • Land Pride RC5015 - page 186

    22084 186 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle T andem Center Dec k (S/N 419602 to 489025) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 187

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5. HHCS 1-8X6 GR5 802-357C 6. HHCS 1/2-13X3 1/4 GR5 802-099C 7. HHCS 1-8X9 GR5 802- ...

  • Land Pride RC5015 - page 188

    23964 188 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle T andem Center Dec k (S/N 489026+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 189

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4. Optional W/ #4 GREASE ZERK 1/4-28 THD FORMING 800-080C 5. HHCS 1-8X7 GR5 802-075C 6. HHCS 1/2-13 ...

  • Land Pride RC5015 - page 190

    15352 190 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Wing (S/N 489025-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 191

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15352 (S/N 223259-) WLDMT . WING AXLE LH. 318-011H 1. (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. HHCS 1-8X6 GR5 802-357C 4. HUB GREASE CAP 200-001D 5. NUT HEX SLO TTED 7/8-14 PL T 803-029C 6. W ASHER SPINDLE - 7/8 804-055C 7. BEAR ...

  • Land Pride RC5015 - page 192

    23963 192 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Wing (S/N 489026+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 193

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. WASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6. HUB 5-BOL T W/CUPS/STUDS 815-243C 7. SEAL 1.75ID CR17617 816-497C 8. P ...

  • Land Pride RC5015 - page 194

    15410 194 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck (S/N 292791-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 195

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5. Includes items 1 through 5 & 14 ASSY . CG. FRT . CENTER LH.OUTER 318-048K 6. HHCS ...

  • Land Pride RC5015 - page 196

    19019 196 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck (S/N 292792 T o 419601) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 197

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . CTR. LH. 318-321K 6. HHCS 3/8-16X ...

  • Land Pride RC5015 - page 198

    22135 198 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck (S/N 419602+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 199

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . CTR. LH. 318-321K 6. HHCS 3/8-16X ...

  • Land Pride RC5015 - page 200

    15690 200 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck Double Chains (S/N 292791-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 201

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY . CG. REAR CENTER 318-070K 5. NUT HEX WHIZ 1/2-13 PL T 803-037C 6. RHSNB 1/2-13X3 1/2 GR5 PL ...

  • Land Pride RC5015 - page 202

    19020 202 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck Double Chains (S/N 292792 T o 419601) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 203

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY . CG. REAR CENTER 318-070K 5. NUT HEX WHIZ 1/2-13 PL T 803-037C 6. RHSNB 1/2-13X3 1/2 GR5 PL T 8 ...

  • Land Pride RC5015 - page 204

    22136 204 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Center Deck Double Chains (S/N 419602+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 205

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5. RHSNB 1/2-13X1 1/4 GR5 802-214C 6. RC5015 CEN FRONT DBLCHAIN RH 318- ...

  • Land Pride RC5015 - page 206

    15436 206 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Wing Deck (S/N 292791-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 207

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15436 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. CG. WING FRONT OUTER LH. 318-100D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5. Includes items 1 through 5 ASSY . CG. FRT . WING OUTER LH. 318-061K 6. CG. WING ...

  • Land Pride RC5015 - page 208

    19018 208 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Wing Deck (S/N 292792+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 209

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19018 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. RC5015 WING CHAINGU ARD LH 318-327D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5. Includes items 1 through 5 ASSY . SGL. CG. FRT . WING LH. 318-323K 6. Includes it ...

  • Land Pride RC5015 - page 210

    23952 210 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Center (826-478C) Comer (S/N 461935 to 461937, 468573+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 211

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.150.726 4. COMER ROLL PIN, INNER TUBE 190.000.016 5. COMER INNER Y OKE 151.016.031.1 6. COM ...

  • Land Pride RC5015 - page 212

    15497 212 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Center 1000 RPM (826-184C) Eur ocardan Applies to RCM5015 ...

  • Land Pride RC5015 - page 213

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15497 PT O INT . CA T .4 1000W/CLUTCH 826-184C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 EC Y OKE ASSEMBL Y (TRACT . END) 1106525 1. EC CR OSS ASSEMBL Y 1006020 2. EC OUTER TUBE Y OKE 1706027 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC TUBE J ACK SHAFT 15 ...

  • Land Pride RC5015 - page 214

    26867 214 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Center 1000 RPM (826-261C) W alter scheid Applies to RCM6015 ...

  • Land Pride RC5015 - page 215

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26867 RPBY 826-478C 826-261C * WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CROSS & BEARING KIT 2500 312209 2. WS INBO ARD Y OKE 2500 97140 3. WS SPRING PIN 10 X 90 304046 4. OUTER PROFILE S5 193839 5. WS FRICTION CLUTCH 391359 6. WS HEX BOL T M16 X 90 GR 8.8 702352 7. ...

  • Land Pride RC5015 - page 216

    16736 216 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v . 1000 RPM (826-189C) EC New Shields Applies to RCM5015 ...

  • Land Pride RC5015 - page 217

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-247C 826-189C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC STOP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHIELD 750MM 1877075 6. EC OUTER TUBE SHIELD 750MM 1876075 7. EC TUBE BEARING ( ...

  • Land Pride RC5015 - page 218

    26862 218 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v . 1000 RPM (826-189C) EC Old Shields Applies to RCM5015 ...

  • Land Pride RC5015 - page 219

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26862 RPBY 826-247C 826-189C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5. EC OUTER TUBE (1528084) 840MM 1528085 6. EC OUTER TUBE Y OKE ...

  • Land Pride RC5015 - page 220

    18549 220 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v . 1000 RPM (826-247C) W alterscheid (S/N 214515+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 221

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18549 PT O 2500 CA T .5 1000 1 3/8-21 826-247C WS Y OKE 1 3/4-20 SPL.I.C . 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 362430 2. WS CROSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4. WS SPRING PIN 10 X 90 304046 5. Rev . 2 WS INNER PR OFILE S4 333645 6. Re ...

  • Land Pride RC5015 - page 222

    12382 222 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-118C) W alter scheid (S/N 214514-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 223

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12382 RPBY 826-244C 826-118C WS Y OKE 1 3/4-20 SPL.I.C. 2500 331053 1. WS Y OKE 1 3/8-21 SPL 380883 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 365722 4. WS CROSS & BEARING KIT 342221 5. WS INBOARD Y OKE 019519 6. WS SPRING PIN 10 X 20 020617 7. WS INNER PROFILE 16 GA ...

  • Land Pride RC5015 - page 224

    26866 224 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-182C) EC New Shields Applies to RCM5015 ...

  • Land Pride RC5015 - page 225

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26866 RPBY 826-244C 826-182C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC STOP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHIELD 680MM 1877068 6. EC OUTER TUBE SHIELD 680MM 1876068 7. EC SHORT CONE 188 ...

  • Land Pride RC5015 - page 226

    26861 226 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-182C) EC Old Shields Applies to RCM5015 ...

  • Land Pride RC5015 - page 227

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26861 RPBY 826-244C 826-182C Rev . 2 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 1. Re v . 1 RPBY 7106632 7600621 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3. EC TUBE BEARING (OLD STYLE) 1786009 4. EC OUTER TUBE (1528084) 780MM 1548078 5. DECAL ...

  • Land Pride RC5015 - page 228

    14067 228 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-244C) 1 3/8-21 W alterscheid (S/N 214515 to 468225) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 229

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg14067 PT O CV 2580 CA T5 1000 1 3/8-21 826-244C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 363696 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4. WS CROSS & BEARING KIT 2500 384316 5. WS INBOARD Y OKE 2500 097140 6. WS SPRING PIN 10 ...

  • Land Pride RC5015 - page 230

    26858 230 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-245C) 1 3/4-20 W alter scheid (S/N 488896-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 231

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26858 PT O CV 2580 CA T5 1000 1 3/4-20 826-245C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CV Y OKE 1 3/4-20 SPL 363729 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4. WS CROSS & BEARING KIT 2500 384316 5. WS INBOARD Y OKE 2500 097140 6. WS SPRING PIN 10 X ...

  • Land Pride RC5015 - page 232

    23948 232 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N 468226 to 547835) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 233

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23948 PT O CV V80X56.8 NO/CL 1 3/8-21 826-477C * COMER CV -JOINT Y OKE COLLER 141.028.359.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.472.1 3. COMER OUTER Y OKE 141.028.248.1 4. COMER OUTER TUBE ROLL PIN 190.000.243 5. COMER WI ...

  • Land Pride RC5015 - page 234

    23960 234 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N 488897+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 235

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23960 PT O CV80 X 77.71 NO CLUTCH 826-499C COMER COLLER Y OKE ASSEMBL Y 141.028.360.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.472.1 3. COMER OUTER Y OKE 141.028.248.1 4. COMER OUTER TUBE ROLL PIN 190.000.243 5. COMER WIPER 18 ...

  • Land Pride RC5015 - page 236

    23995 236 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV Joint (1000 RPM) (7106632) Eur ocardan Applies to RCM5015 ...

  • Land Pride RC5015 - page 237

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23995 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 EC Y OKE W/QD 1006876 1. EC GO6 CROSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4. Rev . 2 EC PULL COLLAR KIT EV OLUTION 1004227 5. Rev . 1 RPBY 1004227 1004225 5. 02/ ...

  • Land Pride RC5015 - page 238

    15513 238 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline CV Joint (1000 RPM) (7600621) Eur ocardan Applies to RCM5015 ...

  • Land Pride RC5015 - page 239

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-21 SPLINE 7600621 EC Y OKE ASSY . 1 3/8-21 SPLINE 1000619 1. Optional Y oke EC Y OKE ASSY 1 3/4-20 SPLINE 1000621 1. EC EC SPIDER ASSEMBL Y 1000630 2. EC SEMI MALE SUPPORT 1700600 3. EC BEARING RING 1700603 4. EC GUIDE DISK 1720602 5. EC SEMI FEMALE ...

  • Land Pride RC5015 - page 240

    23957 240 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch (146.264.024.1) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 241

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4. COMER CLUTCH SUPPORT 151.018.228.1 5. COMER INNER PLA TE 180.019.014 6. COMER INTERMEDIA TE PLA TE ...

  • Land Pride RC5015 - page 242

    23958 242 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch (146.284.020.1) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 243

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4. COMER CLUTCH SUPPORT 151.018.228.1 5. COMER INNER PLA TE 180.019.014 6. COMER INTERMEDIA TE PLA TE ...

  • Land Pride RC5015 - page 244

    17005 244 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch (383805) W altersc heid Applies to RCM6015 ...

  • Land Pride RC5015 - page 245

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5. WS THRUST PLA TE 381495 6. WS BELLEVILLE SPRING 043489 7. WS HEX NUT M8 381957 8. WS BRIDGE 186397 ...

  • Land Pride RC5015 - page 246

    15523 246 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch 1000 RPM (1406016) Eur ocardan Applies to RCM5015 ...

  • Land Pride RC5015 - page 247

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15523 EC CLUTCH FD2/6 1 3/4 20 SPL 1406016 EC CLUTCH SPRING 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC HUB WITH FLANGE 1708017 5. Rev . 2 (S/N) CONICAL DOG KIT 6821484 6. Re v 1; Use up stock (S/N) REP BY ...

  • Land Pride RC5015 - page 248

    16966 248 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch 1000 RPM (391359) W altersc heid Applies to RCM6015 ...

  • Land Pride RC5015 - page 249

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16966 WS FRICTION CLUTCH 391359 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5. WS THR UST PLA TE 381495 6. WS BELLEVILLE SPRING 043489 7. WS BELLEVILLE SPRING 045560 8. WS HEX N ...

  • Land Pride RC5015 - page 250

    15521 250 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch 540/1000 RPM (1446016) EC Applies to RCM5015 ...

  • Land Pride RC5015 - page 251

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5. EC INNER DISK 1138008 6. EC HUB WITH FLANGE 1708016 7. Includes nut and ...

  • Land Pride RC5015 - page 252

    23996 252 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Wing (826-185C) EC New Shielding Applies to RCM5015 ...

  • Land Pride RC5015 - page 253

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5. EC INNER TUBE SHEILD 1877901 6. RPBY 1877901 1877111 6. EC OUTER TUBE SHEILD ...

  • Land Pride RC5015 - page 254

    15567 254 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Wing (826-185C) EC Old Shielding Applies to RCM5015 ...

  • Land Pride RC5015 - page 255

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC 1380MM INNER TUBE 1526121 5. EC 1380MM OUTER TUBE 1528121 6. EC OUTER TUBE Y OKE 1706027 7. EC ...

  • Land Pride RC5015 - page 256

    17004 256 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Wing (826-262C) W alter scheid (S/N 461934-) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 257

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4. WS SPRING PIN 10 X 90 304046 5. WS INBOARD Y OKE 2500 097140 6. WS PROFILE & ...

  • Land Pride RC5015 - page 258

    23953 258 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Wing (826-481C) Comer (S/N 461935 to 461937, 468573+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 259

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE ROLL PIN 190.000.243 4. COMER WIPER 180.018.437 5. COMER TUBE OUTER 1522805450710 6. COMER CLUTCH, DI ...

  • Land Pride RC5015 - page 260

    15601 260 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-176C) RCM6015 (826-233C) OMNI Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 261

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15601 RCM5015 GBO X RC130S 1.75-20 1:1.21 CW 826-176C RCM6015 GBOX RC130L 1.75-20 1:1.21 CW 826-233C RCM5015 (826-176C) OMNI HOUSING RC130S CW 010156 1. RCM6015 (826-233C) OMNI HOUSING RC-130LS 010167 1. OMNI INPUT CAP 020211 2. OMNI OUTPUT PINION, 14T 030415 3. OMNI INPUT ...

  • Land Pride RC5015 - page 262

    15510 262 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-177C) RCM6015 (826-234C) OMNI Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 263

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15510 RCM5015 GBO X RC130S 1.75-20 1.21:1 CW 826-177C RCM6015 GBOX RC130L 1.75-20 1.21:1 CW 826-234C RCM5015 (826-177C) OMNI HOUSING RC130S CW 010156 1. RCM6015 (826-234C) OMNI HOUSING RC-130LS 010167 1. OMNI INPUT CAP 020211 2. OMNI INPUT GEAR, 17T 030416 3. OMNI OUTPUT P ...

  • Land Pride RC5015 - page 264

    15511 264 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-178C) & (826-175C) RCM6015 (826-235C) OMNI Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 265

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15511 RCM5015 GBO X RC130S 1.75-20 1:1.21 CCW 826-178C RCM6015 GBO X RC130L 1.75-20 1:1.21 CCW 826-235C RCM5015 (826-178C) OMNI HOUSING RC130C CCW 010157 1. RCM6015 (826-235C) OMNI HOUS . RC-130LS REV . RO T . 010168 1. OMNI BLANK CAP 020212 2. OMNI OUTPUT PINION, 14T 0304 ...

  • Land Pride RC5015 - page 266

    21167 266 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-317C) RCM6015 (826-322C) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 267

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RCM5015 GBO X RCM50 1.75-20 1:1.21 CCW 826-317C RCM6015 GBO X RCM60 1.75-20 1:1.21 CCW 826-322C RCM5015 (826-317C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-322C) CO HOUSING U0.125.0532.00 1. CO CROWN GEAR Z22 M7.8 U0.125.5003.00 2. CO BEARING 30209 RT A25 8.0.9.0014 ...

  • Land Pride RC5015 - page 268

    21266 268 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-317C) RCM6015 (826-322C) Eurocar dan Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 269

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RCM5015 GBO X RCM50 1.75-20 1:1.21 CCW 826-317C RCM6015 GBO X RCM60 1.75-20 1:1.21 CCW 826-322C RCM5015 (826-317C) HOUSING 16571-01 1. RCM6015 (826-322C) HOUSING 16572-01 1. BEVEL GEAR Z22 M7.80 17271-01 2. BEVEL PINION Z18 M7.8 17271-02 3. INPUT SHAFT 1 3/4" Z2 ...

  • Land Pride RC5015 - page 270

    21167 270 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-318C) RCM6015 (826-323C) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 271

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RCM5015 GBO X RCM50 1.75-20 1.21:1 CCW 826-318C RCM6015 GBO X RCM60 1.75-20 1.21:1 CCW 826-323C RCM5015 (826-318C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-323C) CO HOUSING U0.125.0532.00 1. CO CROWN GEAR Z18 M7.8 U0.125.6003.00 2. CO BEARING 30209 RT A25 8.0.9.0014 ...

  • Land Pride RC5015 - page 272

    21266 272 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-318C) RCM6015 (826-323C) Eurocar dan Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 273

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RCM5015 GBO X RCM50 1.75-20 1.21:1 CCW 826-318C RCM6015 GBO X RCM60 1.75-20 1.21:1 CCW 826-323C RCM5015 (826-318C) HOUSING 16571-01 1. RCM6015 (826-323C) HOUSING 16572-01 1. BEVEL PINION Z18 M7.8 17271-02 2. BEVEL GEAR Z22 M7.80 17271-01 3. INPUT SHAFT 1 3/4" Z2 ...

  • Land Pride RC5015 - page 274

    21171 274 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-319C) RCM6015 (826-324C) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 275

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBO X RCM60 1.75-20 1:1.21 CW 826-324C RCM5015 (826-319C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-324C) CO HOUSING U0.125.0532.00 1. CO CRO WN GEAR Z22 M7.8 U0.125.5003.00 2. CO BEARING 30209 RT A25 8.0.9.00143 ...

  • Land Pride RC5015 - page 276

    21267 276 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x 1000 RPM RCM5015 (826-319C) RCM6015 (826-324C) Eurocar dan Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 277

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBO X RCM60 1.75-20 1:1.21 CW 826-324C RCM5015 (826-319C) HOUSING 16571-01 1. RCM6015 (826-324C) HOUSING 16572-01 1. BEVEL GEAR Z22 M7.80 17271-01 2. BEVEL PINION Z18 M7.8 17271-02 3. INPUT SHAFT 1 3/4" Z20 ...

  • Land Pride RC5015 - page 278

    26958 278 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x Divider 1000 RPM (826-180C) Comer Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 279

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26958 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C * CO BOL T M10 X 35 8.8 8.1.1.00109 1. T OP COVER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.2.01772 4. CO OIL SEAL 45 X 85 X 10 8.7.3.00331 5. CO CASING 0.305.0300.01 6. CO SHIM 84.7 0.709.75 ...

  • Land Pride RC5015 - page 280

    15504 280 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo x Divider 1000 RPM (826-180C) OMNI Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 281

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15504 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C * OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI GEAR, 26T 030194 5. OMNI PINION, 20T 030193 6. OMNI OUTPUT SHAFT ,1.75-20SHORT 040121 7. OMNI INPUT ...

  • Land Pride RC5015 - page 282

    15427 282 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Center Lift Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 283

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5015 & RCM5015 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6015 & RCM6015 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3. EL 3/4MJIC 3/4MORB 811-063C 4. Rev . 2 not compat. w/Rev . 1. (S/N 22 ...

  • Land Pride RC5015 - page 284

    25899 284 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder (810-150C) Red Lion Applies to RCM5015 ...

  • Land Pride RC5015 - page 285

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5. PLUG 9/16-18UNF MORB SOCKET HD 186561 6. Only Found in Kit #20 MON ROD SE ...

  • Land Pride RC5015 - page 286

    25900 286 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder (810-162C) Red Lion Applies to RCM6015 ...

  • Land Pride RC5015 - page 287

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5. LION PLUG 3/4-16UNF SOCKET HD 186562 6. Only F ound in Kit #20 MON ROD SEA ...

  • Land Pride RC5015 - page 288

    25902 288 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder (810-312C) Red Lion) Applies to RCM6015 ...

  • Land Pride RC5015 - page 289

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4. Only F ound in Kit #18 MON ROD SEAL N/A 5. Only F ound in Kit #18 MON PISTON SEAL (PSP ...

  • Land Pride RC5015 - page 290

    12499 290 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder (810-624C) Midwa y Applies to RCM5015 ...

  • Land Pride RC5015 - page 291

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4. MW TUBE 3 X 8 CYLINDER 5M4116 5. MW CAPSCREW 2A0006 6. MW CLEVIS STD . DUTY 1M6010 7. MW N ...

  • Land Pride RC5015 - page 292

    25896 292 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder (810-624C) Red Lion Applies to RCM5015 ...

  • Land Pride RC5015 - page 293

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4. Only found in seal kit #19 MON ROD SEAL N/A 5. Only found in seal kit #19 MON PIST ON ...

  • Land Pride RC5015 - page 294

    12499 294 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Center (810-195C) Midwa y Applies to RCM5015 ...

  • Land Pride RC5015 - page 295

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4. MW TUBE 3 X 8 CYLINDER 5M4116 5. MW CAPSCREW 2A0006 6. MW CLEVIS STD . DUTY 1M6010 7. MW NU ...

  • Land Pride RC5015 - page 296

    11421 296 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Center Lift (810-162C) Cr oss Applies to RCM6015 ...

  • Land Pride RC5015 - page 297

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CR OSS 2A0236-9 2. Only av ailable in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4. TIE ROD CR OSS 1D0009-1050 5. CROSS SCREW , CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. CROSS ...

  • Land Pride RC5015 - page 298

    11421 298 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Center Lift (810-162C) Midwa y Applies to RCM6015 ...

  • Land Pride RC5015 - page 299

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only availab le in Seal Kit (#19) O-RING 3. MW ROD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5. MW CAPSCREW 2A0006 6. MW CLEVIS PIN 2A0208 7. MW PIN CLIP 2A0132 8. MW CLEV ...

  • Land Pride RC5015 - page 300

    15572 300 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Wing (810-150C) Cr oss Applies to RCM5015 ...

  • Land Pride RC5015 - page 301

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE ROD CR OSS 2A0578-1675 4. TUBE CROSS 1D0005-1450 5. CROSS SCREW , CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. ...

  • Land Pride RC5015 - page 302

    15572 302 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Wing (810-150C) Midwa y Applies to RCM5015 ...

  • Land Pride RC5015 - page 303

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. ROD MW TIE 7M3320 4. MW TUBE 5M3120 5. MW CAPSCREW 2A0006 6. MW CLEVIS PIN 2A0208 7. MW PIN CLIP 2A0132 8. MW CLEVIS STD . DUTY 1M60 ...

  • Land Pride RC5015 - page 304

    15572 304 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Wing (810-312C) Cr oss Applies to RCM6015 ...

  • Land Pride RC5015 - page 305

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 CYL 3X12X1.25 ROD (TIE R OD 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4. TUBE CROSS 1D0005-1450 5. CROSS SCREW CAP 2A0079-616 6. CROSS CLEVIS PIN 1D1551-16275 7. CROSS PIN ...

  • Land Pride RC5015 - page 306

    15242 306 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Cylinder Wing (810-312C) Midwa y Applies to RCM6015 ...

  • Land Pride RC5015 - page 307

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 CYL 3X12X1.25 ROD (TIE R OD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW ROD 1-1/4 DIA. X 10 STR OKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA. 4M4104 4. MW TUBE 3 X 15 CYLINDER 5M4120 5. MW BASE 3 X 9/16 SAE 6M4152 6. MW TIE ROD 3 X 10 CYLINDE ...

  • Land Pride RC5015 - page 308

    25519 308 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Independent Wing Contr ol Accessor y Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 309

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25519 HYDRA ULIC WING CONTROL ASSY . 318-316A * AD 9/16MJIC 811-315C 1. CP 3/4FORB MALE QD POPPET TYPE 811-394C 2. HH3/8R1 162 3/4MORB 9/16 FJIC 811-633C 3. 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 309 T able of Contents P ar t Number Index Se ...

  • Land Pride RC5015 - page 310

    19893 310 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic V alve Selector Assessory Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 311

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 2-W A Y SELECTOR VL V KIT 312-316A HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 1. AD 1/2FNPTS 3/4MORB 811-021C 2. SELECT OR V AL VE 3-W A Y 2 POS 810-152C 3. AD 3/4MORB 3/4MJIC 811-088C 4. HH3/8R2 60 1/2MNPT 3/4FJIC 811-360C 5. 02/03/09 RC5015, RCM5015, RC6015 & RCM601 ...

  • Land Pride RC5015 - page 312

    11196 312 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic V alve Spool Contr ol Accessory Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 313

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 3-SPOOL V AL VE KIT 312-315A 3-SPOOL DIRECTION CONTR OL V AL V 810-167C 1. HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 2. AD 3/4MJIC 1/2FNPT 811-290C 3. EL 3/4MJIC X 3/4MNPT 811-359C 4. EL 1/2MNPT 1/2FNPTS 811-008C 5. HH3/8R2 60 1/2MNPT 3/4FJIC 811-360C 6. CROSS SEAL KIT 2 ...

  • Land Pride RC5015 - page 314

    15426 314 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraulic Wing Lift Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 315

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 RC5015 & RCM5015 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6015 & RCM6015 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/16 9/16MJIC 9/16MORB 811-337C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3. HH1/4R1 066 9/16FJIC 811-309C 4. TE 9/16MJIC BH 9/16MJIC 9/16M ...

  • Land Pride RC5015 - page 316

    25515 316 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Maunal Winch Wing Deck Accessory Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 317

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25515 MECHANICAL WINCH 318-271A * WLDMT . WINCH 318-256H 1. HHCS 3/8-16X1 3/4 GR5 802-023C 2. HHCS 5/8-11X1 3/4 GR5 802-053C 3. NUT LOCK 3/8-16 PL T 803-013C 4. NUT HEX T OP LOCK 5/8-11 PL T 803-271C 5. W ASHER FLA T 3/8 USS PL T 804-011C 6. W ASHER LOCK SPRING 3/8 PL T 80 ...

  • Land Pride RC5015 - page 318

    17564 318 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RCM5015 & RCM6015 SERIES (1000 RPM) Label Placement Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 319

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17564 RC5015 DECAL P ACKA GE 318-101A RCM5015 DECAL P ACKA GE 318-102A RC6015 DECAL P ACKA GE 318-183A RCM6015 DECAL P ACKA GE 318-184A DECAL W ARNING PINCH PT/CRUSH 818-045C 1. DECAL W ARNING OPERA TING ANGLE 818-276C 2. DECAL D ANGER PTO DRIVELINE 818-552C 3. DECAL D ANG ...

  • Land Pride RC5015 - page 320

    Revision Comments P ar t Description P ar t No. Ref. DECAL D ANGER PTO DRIVELINE 818-552C 30. DECAL IMPORT ANT - SLIP CLUTCH 818-680C 31. FOLDING CUTTER SPEED WARNING 838-588C 32. 320 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RCM5015 & RCM6015 SERIE ...

  • Land Pride RC5015 - page 321

    This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 321 T able of Contents P ar t Number Index Section 8: Labels Land Pride RCM5015 & RCM6015 SERIES (1000 RPM) Label Placement (continued) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 322

    20659 322 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Baffle Shreader Kit Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 323

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg20659 ASSY .BAFFLE/SHRD OMNI RC5015 318-311A ASSY .BAFFLE/SHRD COMER RC5015-6015 318-395A ASSY .BAFFLE/SHRD OMNI RC6015 318-436A (Shown)318-311A OMNI 5015 WELDMENT BLADE CARRIER OMNI 318-302H 1. 318-395A COMER 5015 WELDMENT BLADE CARRIER COMER 318-396H 1. 318-436A OMNI 601 ...

  • Land Pride RC5015 - page 324

    23949 324 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder Kit Comer (S/N 235492+) Applies to RCM5015, RCM6015 ...

  • Land Pride RC5015 - page 325

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23949 ASSY 50/6015 SHREDDER COMER 318-949A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER COMER 318-396H 2. ASSY CCW BLADES 59.5 COMER 318-946S 3. ASSY CCW BLADES 71.5 COMER 318-947S 4. ASSY CW BLADES 59.5 COMER 318-948S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HEX ...

  • Land Pride RC5015 - page 326

    23950 326 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder Kit Omni (S/N 235491-) Applies to RCM5015 ...

  • Land Pride RC5015 - page 327

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23950 ASSY 5015 SHREDDER OMNI 318-953A * WELDMENT BLADE CARRIER 318-302H 1. BLADE BUSHING 318-309D 2. ASSY CCW BLADES 59.5 OMNI 50 318-950S 3. ASSY CCW BLADES 71.5 OMNI 50 318-951S 4. ASSY CW BLADES 59.5 OMNI 50 318-952S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HEX T O ...

  • Land Pride RC5015 - page 328

    23951 328 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder Kit Omni (S/N 235491-) Applies to RCM6015 ...

  • Land Pride RC5015 - page 329

    Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23951 ASSY 6015 SHREDDER OMNI 318-957A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER OMNI 318-435H 2. ASSY CCW BLADES 59.5 OMNI 60 318-954S 3. ASSY CCW BLADES 71.5 OMNI 60 318-955S 4. ASSY CW BLADES 59.5 OMNI 60 318-956S 5. HHCS 1-8 X 4 1/2 PL T GR8 802-680C 6. NUT HE ...

  • Land Pride RC5015 - page 330

    The P ar t Number Index is a numeric inde x of all par t numbers included in this manual. The index sho ws what page(s) the par t is used on. Pa g e Part Number 105, 109, 267, 271, 275 0.121.7101.00 ........... 105, 109, 267, 271, 275 0.252.7525.00 ........... 105, 109, 267, 271, 275 0.285.7510.00 ........... 20, 105, 109, 174, 267, 271, 275 0.288. ...

  • Land Pride RC5015 - page 331

    Pa g e Part Number 67, 73, 95, 219, 227, 255 1786008 .................... 67, 73, 95, 219, 227, 255 1786009 .................... 71, 73, 225, 227 1786527 .................... 65, 71, 93, 217, 225, 253 1786710 .................... 65, 71, 93, 217, 225, 253 1786711 .................... 107, 111, 269, 273, 277 17871-01 ................... 83, 85, 241, ...

  • Land Pride RC5015 - page 332

    Pa g e Part Number 53, 207 318-130D ................... 41, 43, 53, 195, 197, 207 318-131D ................... 41, 195 318-132D ................... 41, 195 318-133D ................... 41, 195 318-134D ................... 53, 207 318-136D ................... 53, 207 318-137D ................... 41, 195 318-138D ................... 41, 195 318-139D ...

  • Land Pride RC5015 - page 333

    Pa g e Part Number 121, 123, 287, 289 492652 ...................... 127, 293 492670 ...................... 127, 293 492675 ...................... 121, 287 492676 ...................... 121, 287 492677 ...................... 119, 285 492688 ...................... 121, 287 492700 ...................... 123, 289 492721 ...................... 123, 289 ...

  • Land Pride RC5015 - page 334

    Pa g e Part Number 13, 15, 20, 25, 103, 115, 151, 804-013C ................... 167, 169, 174, 179, 281, 317 13, 15, 27, 31, 37, 167, 169, 181, 185, 191 804-015C ................... 13, 16, 27, 31, 37, 167, 170, 181, 185, 191 804-016C ................... 151, 317 804-019C ................... 13, 15, 167, 169 804-023C ................... 23, 177 804- ...

  • Land Pride RC5015 - page 335

    Pa g e Part Number 170, 221 826-247C ................... 15, 61 826-260C ................... 169, 215 826-261C ................... 20, 97, 174, 257 826-262C ................... 15, 19, 105, 107 826-315C ................... 15, 19 826-315C81 ............... 15, 19 826-315C83 ............... 19, 109, 111 826-316C ................... 173, 267, 269 826 ...

  • Land Pride RC5015 - page 336

    Great Plains Manufacturing, Inc. Corporate Office: P .O. Box 5060 Salina, Kansas 67402-5060 USA www .landpride.com ...

Manufacturer Land Pride Category Brush Cutter

Documents that we receive from a manufacturer of a Land Pride RC5015 can be divided into several groups. They are, among others:
- Land Pride technical drawings
- RC5015 manuals
- Land Pride product data sheets
- information booklets
- or energy labels Land Pride RC5015
All of them are important, but the most important information from the point of view of use of the device are in the user manual Land Pride RC5015.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Land Pride RC5015, service manual, brief instructions and user manuals Land Pride RC5015. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Land Pride RC5015.

Similar manuals

A complete manual for the device Land Pride RC5015, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Land Pride RC5015 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Land Pride RC5015.

A complete Land Pride manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Land Pride RC5015 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Land Pride RC5015, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Land Pride RC5015, that we can find in the current document
3. Tips how to use the basic functions of the device Land Pride RC5015 - which should help us in our first steps of using Land Pride RC5015
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Land Pride RC5015
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Land Pride RC5015 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Land Pride RC5015?

Use the form below

If you did not solve your problem by using a manual Land Pride RC5015, ask a question using the form below. If a user had a similar problem with Land Pride RC5015 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)