English dropdown-ico

Manual Carrier 40RM007-034

48 pages 1.01 mb
Download

Go to site of 48

Summary
  • Carrier 40RM007-034 - page 1

    Manufa cturer res erves the right to discon tinue, or chang e at any time , specificat ions or designs witho ut notic e and wit hout inc urring obligati ons. PC 111 Catalo g No. 534-0000 3 Printed in U.S .A. Form 40 RM-23SI Pg 1 12-0 4 Replace s: 40RM -22SI Book 1 4 Ta b 3 c 2 e Installation, Star t-Up and Ser vice Instr uctions CONTENTS Page SAFET ...

  • Carrier 40RM007-034 - page 2

    2 Movi ng and Storage — T o transfer unit from truck to storage site, use a fork truck. Do not stack units more than 2 high during storage . If unit is to be stored for more than 2 weeks before installation, choose a level, dry storage site fre e from vibration. Do not remove plastic wrap or skid from unit until final installation. Rigging — Al ...

  • Carrier 40RM007-034 - page 3

    3 Table 1A — 40RM P hysical Data, English — Cooling Units LEGEND *Units are shipped without refrigerant charge . UNIT 40RM 007 008 012 014 016 024 028 034 NOMINAL CAP ACITY (T ons) 67 1 / 2 10 12 1 / 2 15 20 25 30 OPERA TING WEIGHT (lb) Base Unit with TXV 381 385 405 670 685 690 1020 1030 Plen um 175 175 175 225 225 225 325 325 F ANS Qty ...D i ...

  • Carrier 40RM007-034 - page 4

    4 Table 1B — 40RMQ Physical Data, English — Heat Pump U nits LEGEND *Units are shipped without refrigerant charge . UNIT 40RMQ 008 012 016 024 028 NOMINAL CAP ACITY (T ons) 7 1 / 2 10 15 20 25 OPERA TING WEIGHT (lb) Base Unit with TXV 385 427 713 720 1050 Plen um 175 175 225 140 180 F ANS Qty . ..D iam . (in. ) 1...15 1...15 2...15 2...15 2...1 ...

  • Carrier 40RM007-034 - page 5

    5 Table 1C — 40R MS Phys ical Data, Eng lish — Chill ed Water Uni ts UNIT 40RMS 008 010 012 014 016 024 028 0 34 NOMINAL CAP ACITY (T ons) 7 1 / 2 8 1 / 2 10 12 1 / 2 15 20 25 30 OPERA T ING W EIGH T (l b) Base Unit 390 391 391 661 677 683 1035 1042 Plen um 175 175 175 225 225 225 325 325 F ANS Qty ...Dia m. (in. ) 1...15 1 ...15 1... 15 2...15 ...

  • Carrier 40RM007-034 - page 6

    6 Table 1D — 40RM Physical Data, SI — Cooling Units LEGEND *Units are shipped without refrigerant charge . UNIT 40RM 007 008 012 01 4 016 024 02 8 034 NOMINAL CAP ACITY (kW) 21 26 35 43 52 70 87 105 OPERA TING WE IGHT (k g) Base U nit with TXV 173 175 184 3 04 311 3 13 463 467 Plen um 80 80 80 102 102 10 2 148 148 F ANS Qty ...Diam . (mm) 1...3 ...

  • Carrier 40RM007-034 - page 7

    7 Table 1E — 40RMQ Phys ical Data, SI — Heat Pump Units LEGEND *Units are shipped without refrigerant charge . UNIT 40 RMQ 008 012 016 024 028 NOMI NAL CAP A CITY ( kW) 26 35 52 70 87 OPERA TING WEIGHT (kg) Base Unit with TXV 175 194 323 326 477 Plen um 80 80 102 44 44 F ANS Qty ...Diam. (mm) 1...381 1...381 2...381 2...381 2...457 Nominal Airf ...

  • Carrier 40RM007-034 - page 8

    8 Tabl e 1F — 40RM S Physi cal Dat a, SI — Chill ed Wat er Unit s UNIT 40R MS 008 01 0 01 2 014 016 024 0 28 034 NOMINAL CAP ACITY (kW) 26 29 35 43 52 70 87 105 OPERA TING WE IGHT (k g) Base Unit 177 177 177 300 307 310 4 69 473 Plen um 80 80 80 102 102 102 14 8 148 F ANS Qty ...Diam . (mm) 1...381 1...381 1...381 2...381 2... 381 2...381 2.. . ...

  • Carrier 40RM007-034 - page 9

    9 LEGEND TXV — Th er m ostatic Expansion V alve NO TES : 1. Dimensions in [ ] ar e in millimeters. 2. Direction of airflow . 3. Recommended clearance: • Rear : 3 in. (76 mm) • F ront: 2 ft, 6 i n. (762 mm) • Right Side: 2 ft, 6 i n. (762 mm) • Left Side: 2 ft, 6 in. (762 mm) • Local codes or jurisdiction may pre vail. 4. Liquid piping n ...

  • Carrier 40RM007-034 - page 10

    10 LEGEND TXV — T hermost atic Expansion V alve NOTES: 1. Dimensions in [ ] are in millimeters. 2. Direction of airflow . 3. Recommended clearance: • Rear : 3 in. (76 mm) • F r ont: 2 ft, 6 in. (762 mm ) • Right Side: 2 f t, 6 in. (762 mm) • Le ft Si de: 2 ft , 6 i n. (7 62 mm) • Local codes or jurisdict ion may prev ail. 4. Liquid pipi ...

  • Carrier 40RM007-034 - page 11

    11 LEGEND TXV — Therm ostatic Expansion V alve NO TES: 1. Dimensions in [ ] are in millimeters. 2. Direction of airf low . 3. Recomm ended clearance: • Rear : 3 in. (76 mm) • F r ont: 2 ft, 6 in. (762 mm) • Right Side: 2 ft, 6 in. (762 mm) • Left Side: 2 ft, 6 in. (762 mm) • Local codes or jurisdiction may pre vail. 4. Liquid piping not ...

  • Carrier 40RM007-034 - page 12

    12 40RM – Commercial Packaged Air Handler 4 0 R M–0 1 6– –B501G C Cooling Coil –– Direct Expansion Q– Direct Expansion for Heat Pump Duty S– Chilled W ater Not Used Expansion Device –– None (40RMS) B– Thermostatic Expansion V alves (40RM, 40RMQ) H– TXV with High Capacity , 4 Row Coil Factory-Installed Options GC – Unpainte ...

  • Carrier 40RM007-034 - page 13

    13 Unit P ositioning — The unit can be mounted on the floor for verti cal application w ith return air ent ering the face of the unit and supply air discharging vertically through the top of the unit. The unit can also be applied in a horizontal arrange- ment with return air entering horizontally and the supply air discharging horizontally . When ...

  • Carrier 40RM007-034 - page 14

    14 NO TE: Dimensions in [ ] are millimeters. Fig. 5 — Preferr ed Suspension T ech nique UNIT SIZES 007 -012 UNIT SIZES 014-02 4 UNIT SIZES 028,0 34 O VERHEAD SUSPENSION ACCESSOR Y ...

  • Carrier 40RM007-034 - page 15

    15 *Must be enlar ged from 1 1 / 8 in. to 1 3 / 4 inches. NO TE: Acces s ho le kn ock outs 1-4 are f actor y-supplie d. Fig. 6 — Refriger ant and Chilled W ater Piping Acce ss Holes UNIT USE HOLE NUMBERS FIELD-F ABRICA TED HOLE DIAMETE RS, in. (mm) FIELD-F ABRICA TE D HOLE POSITIO N DIMEN SION S, in. (mm ) N o . 5 N o . 6 N o . 7 N o . 8 ABCD 40R ...

  • Carrier 40RM007-034 - page 16

    16 RETURN AIR SUBBASE ACCESSORY 15 DIAMS MIN 40RMQ024 UNIT ELECTRIC HEA TER ACCESSORY 24 V CONTROL WIRE BULB CAPILLARY TUBES 10 DIAMS MIN CONDENSA TE DRAIN 8 DIAMS MIN DISCONNECT PER NEC INSULA TED V APOR LINE FUSED DISCONNECT SWITCH* FUSED DISCONNECT SWITCH* SIGHT GLASS* FIL TER DRIER* INSULA TED V APOR LINE LIQUID LINE CONDENSING UNIT A CONDENSIN ...

  • Carrier 40RM007-034 - page 17

    17 Table 2 — Factory-Installed Nozzle and Distributor Data *F eeder tube size is 1 / 4 in. (6.35 mm). NO TE: Hot gas bypass application s require field-supplied auxiliary side connector . Table 3 — Fitting Re quirements *See Fig. 6 f or access hole locat ion by n umber . †Fitt ings are listed in order from header o r tee s tub conn ection out ...

  • Carrier 40RM007-034 - page 18

    18 Table 3 — Fitting Requirements (cont) *See Fig. 6 f or access hole locat ion by n umber . †Fitt ings are listed in order from header o r tee s tub conn ection out to access h ole in c orner support post. UNIT ACCESS HOLE NO. * CONNECTION TYPE CI RCUIT FITTINGS REQUIRED † (in.) 40RM 014 1 Suct ion Lowe r 1 1 / 8 Stre et E lbow 1 1 / 8 Nippl ...

  • Carrier 40RM007-034 - page 19

    19 Table 3 — Fitting Requirements (cont) *See Fig. 6 f or access hole locat ion by n umber . †Fitt ings are listed in order from header o r tee s tub conn ection out to access h ole in c orner support post. Chilled W ater Piping — See T ables 1C and 1F for chilled water c onnection sizes . For ease in brazi ng, it is recom- mended that all in ...

  • Carrier 40RM007-034 - page 20

    20 Condensate Drain — Install a trapped condensate drai n line to unit connection as shown in Fig. 13. The unit drain con- nection is a PVC stub. See Fig. 14. Some areas may require an adapter to connect to either gal vanized steel or coppe r pipe. For these applications, i nstall a field-supplied t hreaded PVC adapter . NOTE: A trap must be i ns ...

  • Carrier 40RM007-034 - page 21

    21 P ower Suppl y and Wiri ng — Check th e unit data plate to ensure that available power supply matches electrical characteristics of the unit. Provide a disconnect sw itch of size required to provide adequate fan motor starting current. See T ables 4-6 for unit el ectrical data. Install disc onnect switc h and pow er wiring in accordanc e with ...

  • Carrier 40RM007-034 - page 22

    22 Table 4 — E lectrical Data, Standard Motors See Legend and Notes on page 23. UNIT V*-PH-Hz VOLT AG E LIMITS F AN MO TOR PO WER SUPPL Y Hp (kW ) FLA Minimum Circuit Amps MOCP 40RM 007 208/230- 1-60 187-253 1.3 (0.97) 7.6 9.5 15 208/230- 3-60 187-253 2.4 (1.79) 5.8 7.3 15 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15 575-3-60 518-632 1.0 (0.75) 1.4 1.7 ...

  • Carrier 40RM007-034 - page 23

    23 Table 5 — Electr ical Data, Alternat e Motors Legend and Notes For T ables 4 and 5 LEGEND *Mo tors are de sign ed f or satis f acto ry oper atio n with in 10% of nominal vo lt- ages shown. V olta ges should not exceed the limits shown i n the V oltag e Lim- its column. NO TES: 1. Minimum ci rcuit amps (M CA) and MOCP values are ca lculat ed in ...

  • Carrier 40RM007-034 - page 24

    24 Table 6 — Fan Contactor C oil Data Connecting Duct work — Refer to the Carrier System Design Manual for the re commended design and l ayout of ductwork. Figure 18 shows rec ommended duct conne ction to units with 2 fans. DISCHARGE CONNECTIONS — Du ct fl a ng es a re factory-supplied; they are shipped i nside the unit attached t o the hairp ...

  • Carrier 40RM007-034 - page 25

    25 ST AR T -UP Before starting unit, check the following and correc t as nec- essary: • Is unit solidl y supported ? • I s fan adju sted for speed and pu lley alignment? • Are pulleys, motor , and bearings sec urely mounte d? • Are there any loose parts that will rattle or vibrate? • I s conden sate drain pan pitched for co rrect drainage ...

  • Carrier 40RM007-034 - page 26

    26 Centering F an Wheel — If fan and fan shaft assembly are not properly centered, blade s may scrape against scroll or may create an objectionable whistling noise. It may be neces- sary to adjust individual fan wheels or move ent ire fan shaft. See the following two sections. Fa n Shaft P osition Adjustment — Loosen set - screw or locking coll ...

  • Carrier 40RM007-034 - page 27

    27 Fa n Pulley Ali gnment — Align as fo llow s: 1. Loosen setscrews on pulleys. 2. Align pulleys visually and tighten se tscrews on fan pulley to lock it in pl ace. 3. Use the methods shown i n Fig. 24 to c heck proper pulley alignment. 4. If pulleys are not in correc t alignment, loosen the mot or holddown bolts and slide the motor axially until ...

  • Carrier 40RM007-034 - page 28

    28 Replacing Filt ers — Filters can be removed and in- stalled from either side of the unit. Install new filters in units that have one fa n as follows: 1. Remove the side ac cess panel (retain scre ws). 2. Remove the filter reta iner clip (see Fig. 25). 3. Remove old filters by lifting and tilting them out of the filter track. See Fig. 15 and 26 ...

  • Carrier 40RM007-034 - page 29

    29 Table 8A — Fan Motor Data, Standard Motor — English LEGEND NEMA — National Electrical Manufacturers Association Table 8B — Fan M otor Data, Alternate Motor — English LEGEND NEMA — National Electrical Manufacturers Association UNIT 40RM 007 40RM 40RMQ 40RMS 008 40RMS 010 40RM 40RMQ 40RMS 012 40RM 40RMS 014 40RM 40RMQ 40RMS 016 40RM 40 ...

  • Carrier 40RM007-034 - page 30

    30 Table 8C — Fan Motor Data, Standa rd Motor — SI LEGEND NEMA — National Electrical Manufacturers Association Table 8D — Fan M otor Data, Alternate Motor — SI LEGEND NEMA — National Electrical Manufacturers Association UNIT 40RM 007 40RM 40RMQ 40RMS 008 40RMS 010 40RM 40RMQ 40RMS 012 40RM 40RMS 014 40RM 40RMQ 40RMS 016 40RM 40RMQ 40RMS ...

  • Carrier 40RM007-034 - page 31

    31 Table 9A — Standard Drive Data, 60 Hz — English *F our belts shipped wit h unit. Use corr ect set of 2 belts sized according to the pulley setting. Table 9B — Medium-Static Drive Data, 60 Hz — English *F our belts shipped wit h unit. Use corr ect set of 2 belts sized according to the pulley setting. UNIT 40RM 007 40RM 40RMQ 40RMS 008 40R ...

  • Carrier 40RM007-034 - page 32

    32 Table 9C — High-Static D rive Data, 60 Hz — Engli sh *V alues for 3-phase motor shown. For single-phase motor , pulle y pitch diameter is 7 in. and result- ing fan speed is 837-1096 r pm. †It is possible to adjust drive so that f an speed exceeds maximum allowab le. DO NO T exceed 1200 r pm. **575-v unit has a center distance of 9. 16-10.9 ...

  • Carrier 40RM007-034 - page 33

    33 Table 9E — Medium-Static Drive Data, 60 Hz — SI *F our belts shipped wit h unit. Use corr ect set of 2 belts sized according to the pulley setting. Table 9F — High-Static Drive Data, 60 Hz — SI *V alues for 3-phase motor shown. F or single-phase motor , pulley pi tch diameter is 178 mm and resulting fan speed is 14.0-18.3 r/s. †It is p ...

  • Carrier 40RM007-034 - page 34

    34 Table 10A — Stand ard Drive Data, 50 Hz — English Table 10B — Medium-St atic Drive Data, 50 H z — Engli sh UNIT 40RM 007 40RM 40RMQ 40RMS 008 40RMS 010 40RM 40RMQ 40RMS 012 40RM 40RMS 014 40RM 40RMQ 40RMS 016 40RM 40RMQ 40RMS 024 40RM 40RMQ 40RMS 028 40RM 40RMS 034 MO T OR DRIVE Motor Pulley Pitch Diamet er (in.) 2.4-3.4 2.8-3.8 2.8-3.8 ...

  • Carrier 40RM007-034 - page 35

    35 Table 10C — High-Static Dr ive Data, 50 Hz — English *It is possib le to adjust drive so that f an speed exceeds maximum allo wabl e. DO NO T exceed 1200 rpm . Table 10D — Standar d Drive Data, 50 H z — SI UNIT 40RM 007 40RM 40RMQ 40RMS 008 40RMS 010 40RM 40RMQ 40RMS 012 40RM 40RMS 014 40RM 40RMQ 40RMS 016 40RM 40RMQ 40RMS 024 40RM 40RMQ ...

  • Carrier 40RM007-034 - page 36

    36 Table 10 E — Medi um-Static Dr ive Data, 5 0 Hz — SI Table 10F — Hi gh-Stat ic Drive Data, 50 Hz — SI *It is possib le to adjust drive so that f an speed exceeds maximum allo wabl e. DO NO T exceed 20 r/s. UNIT 40RM 007 40RM 40RMQ 40RMS 008 40RMS 010 40RM 40RMQ 40RMS 012 40RM 40RMS 014 40RM 40RMQ 40RMS 016 40RM 40RMQ 40RMS 024 40RM 40RMQ ...

  • Carrier 40RM007-034 - page 37

    37 Table 11A — 40RM,RMQ Standard Fan Performance Data — 0.0-2.4 in . wg Ext ernal Sta tic Pres sure — E nglish See Legend and Notes on page 45. UNIT 40RM, RMQ AIRFLO W (Cfm) EXTERNAL ST A TIC PRESSURE (in. wg) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Rpm Bhp Rpm B hp Rpm Bhp Rpm Bhp Rp m Bhp Rpm Bhp Rpm Bhp 007 1,800 399 0.19 454 0.24 548 0.35 634 0.47 71 ...

  • Carrier 40RM007-034 - page 38

    38 Table 11A — 40RM,RMQ Standard Fan Performance Data — 0.0-2.4 in. wg External Stat ic Pressure — En glish (cont) See Legend and Notes on page 45. UNIT 40RM, RMQ AIRFLO W (Cfm) EXTERNAL ST A TIC PRESSURE (in. wg) 1.4 1.6 1.8 2.0 2. 2 2.4 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp R pm Bhp 007 1,800 910 1.04 965 1.20 1016 1.36 1065 1.52 1111 1.6 ...

  • Carrier 40RM007-034 - page 39

    39 Table 11B — 40RM,RMQ Standard Fan Performance Data — 0-600 kP a Exter nal Stati c Pressu re — S I See Legend and Notes on page 45. UNIT 40RM, RMQ AIRFLO W (L/s ) EXTERNA L ST A TIC PRESS URE (kP a) 0 50 100 150 200 250 300 r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW 007 850 6.64 0.14 7.56 0.18 9 .13 0.26 1 0.56 0.35 11.88 0.45 13.08 0 ...

  • Carrier 40RM007-034 - page 40

    40 Table 11B — 40RM,RMQ Standard Fan Performance Data — 0-600 kP a Externa l Static Pressu re — SI ( cont) See Legend and Notes on page 45. UNIT 40RM, RMQ AIRFLO W (L/s) EXTERNAL ST A TIC PRESSURE ( kP a) 350 400 450 500 550 600 r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW 007 850 15.16 0.78 16.08 0.89 16.94 1.01 17.74 1.13 18.51 1.26 19.25 1.39 ...

  • Carrier 40RM007-034 - page 41

    41 Table 11C — 40RM High-Cap acity Fan Perf ormance Data — 0.0-2.4 in . wg Ext ernal Sta tic Pres sure — E nglish See Legend and Notes on page 45. UNIT 40RM AIRFLO W (Cfm) EXTERNAL ST A TIC PRESSURE (in. wg) 0.0 0.2 0.4 0. 6 0.8 1.0 1.2 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 007 1,800 419 0.21 471 0.26 564 0.37 649 0.49 727 0 ...

  • Carrier 40RM007-034 - page 42

    42 Table 11C — 40RM High-Cap acity Fan Perf ormance Data — 0.0-2.4 in. wg External Stat ic Pressure — En glish (cont) See Legend and Notes on page 45. UNIT 40RM AIRFLO W (Cfm ) EXTERNAL ST A TIC PRESSURE (in. wg) 1.4 1.6 1.8 2.0 2.2 2. 4 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp R pm Bhp 007 1,800 921 1.07 975 1.23 1026 1. 39 1074 1.55 1120 1.7 ...

  • Carrier 40RM007-034 - page 43

    43 Table 11D — 40RM High-Cap acity Fan Perf ormance Data — 0-600 kP a Exter nal Stati c Pressu re — S I See Legend and Notes on page 45. UNIT 40RM AIRFLO W (L/s ) EXTERNA L ST A TIC PRESS URE (kP a) 0 50 100 150 200 250 300 r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW 007 850 6.98 0.16 7.86 0.19 9 .40 0.27 1 0.81 0.37 12.11 0.47 13.29 0.5 ...

  • Carrier 40RM007-034 - page 44

    44 Table 11D — 40RM High-Cap acity Fan Perf ormance Data — 0-600 kP a Externa l Static Pressu re — SI ( cont) See Legend and Notes on page 45. UNIT 40RM AIRFLO W (L/s) EXTERNAL ST A TIC PRESSURE ( kP a) 350 400 450 500 550 600 r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW 007 850 15.34 0.80 16.25 0.92 17.10 1.03 17.90 1.16 18.66 1.28 19.39 1.41 8 ...

  • Carrier 40RM007-034 - page 45

    45 Legend and No tes for Tab les 11A and 1 1C LEGEND NO TES: 1. Maximum allowab le f an speed is 1100 r pm for unit sizes 028 and 034; 1200 rpm for all other sizes. 2. F an performance is based on deductions for wet coil, clean 2-in. filters, and unit casing. See table at right for factory-supplied f ilter pressure drop. 3. Ref er to f an motor and ...

  • Carrier 40RM007-034 - page 46

    Manufa cturer reser ves the right to discon tinue, or change at any time, specificat ions or designs w ithout not ice and without incurrin g obligations. PC 111 Catalog No. 534-00003 Pr inte d in U.S.A. Form 40 RM-23SI P g 46 12-04 Replace s: 40RM-22 SI Book 1 4 Ta b 3 c 2 e Copyright 2 004 Car rier Cor porati on ...

  • Carrier 40RM007-034 - page 47

    ST ART -UP CHE CKLIST (SPLIT SYSTE MS WITH 40R M,RMQ ,RMS U NITS) I. P RELIMINAR Y INFORMA TION OUTDOOR: MODEL NO . ___ ______________ ________ SERIAL NO. ____________________ ______________ _ INDOOR: MODEL NO. __________________ _________ SERIAL NO. _____ ______________ ______________ __ ADDITIONAL ACCESSORIES _____________ ______________ ________ ...

  • Carrier 40RM007-034 - page 48

    Manufa cturer reser ves the right to discon tinue, or change at any time, specificat ions or designs w ithout not ice and without incurrin g obligations. PC 111 Ca talog N o . 534 -0000 3 Pri nted i n U.S .A. Form 40RM- 23SI P g CL- 2 12-04 Repl aces: 40RM -22SI Book 1 4 Ta b 3 c 2 e Copyright 2 004 Car rier Cor porati on - - - - - - - - - - - - - ...

Manufacturer Carrier Category Air Conditioner

Documents that we receive from a manufacturer of a Carrier 40RM007-034 can be divided into several groups. They are, among others:
- Carrier technical drawings
- 40RM007-034 manuals
- Carrier product data sheets
- information booklets
- or energy labels Carrier 40RM007-034
All of them are important, but the most important information from the point of view of use of the device are in the user manual Carrier 40RM007-034.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Carrier 40RM007-034, service manual, brief instructions and user manuals Carrier 40RM007-034. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Carrier 40RM007-034.

Similar manuals

A complete manual for the device Carrier 40RM007-034, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Carrier 40RM007-034 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Carrier 40RM007-034.

A complete Carrier manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Carrier 40RM007-034 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Carrier 40RM007-034, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Carrier 40RM007-034, that we can find in the current document
3. Tips how to use the basic functions of the device Carrier 40RM007-034 - which should help us in our first steps of using Carrier 40RM007-034
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Carrier 40RM007-034
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Carrier 40RM007-034 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Carrier 40RM007-034?

Use the form below

If you did not solve your problem by using a manual Carrier 40RM007-034, ask a question using the form below. If a user had a similar problem with Carrier 40RM007-034 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)