English dropdown-ico

Manual Hasselblad 10026

93 pages 2.94 mb
Download

Go to site of 93

Summary
  • Hasselblad 10026 - page 1

    503CWOMS.EPS 960807 COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 anders@aeillustr.se V ictor Hasselblad AB Göteborg Sweden Service Manual Copyright © 1998 by Victor Hasselblad AB. All rights reserved. No parts of this material may be reproduced, stored in retrieval system o ...

  • Hasselblad 10026 - page 2

    1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Camera body 503CW Contents list Revision 1 May 1997 General Camera body 501C Camera body 503CXi Camera body 503CX Camera body 500C/M (Classic) Exploded view: W inding crank Exploded view: Left hand wall and electronics Exploded view: Right hand wall Exploded view: F ront bayonet pla ...

  • Hasselblad 10026 - page 3

    Related Service Infos Revision 4 January 2001 503CW - 501C - 503CX/CXi - 500C/M - 501CM 20/93 Flash metering circuit redesigned - 503CX 04/94 New camera - 501C 05/94 Exploded views and spare part specifications - 501C and 503CXi 06/94 Spare part No . changed - 500C/M and 503CX 12/94 Pin fitted in bayonet plate - 501C 04/95 T ripod foot modified - 5 ...

  • Hasselblad 10026 - page 4

    Related Service Infos Revision 4 January 2001 503CW - 501C - 503CX/CXi - 500C/M - 501CM 2. New CD-ROM - V ersion 2.0 04/01 ...

  • Hasselblad 10026 - page 5

    June 1998 Camera body 503CW General description 1:1 Revision 1 Camera type: Single lens reflex camera with 6 x 6 (2 1/4 x 2 1/4 in) max. film size. Interchangeable lenses, film magazines, viewfinders and focusing screens. Weight: 610 g. Lens mount: Hasselblad bayonet mount for CF and C lenses. External dimensions: 91L x 114W x 110H (3 9/16 x 4 1/2 ...

  • Hasselblad 10026 - page 6

    0 31 9 ° 300 280 260 240 220 200 18 0 16 0 14 0 12 0 10 0 80 60 40 20 0 20 40 60 80 10 0 12 0 14 0 16 0 18 0 200 220 240 260 280 300 320 340 360 ° 503DGRM1 961018 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se October 1996 1:2 Camera body 503CW ...

  • Hasselblad 10026 - page 7

    T ools Camera body 503CW October 1996 Revision 0 T ool No . Description Used for 2:1 V-2200 Bender Signal arm adjustment V-2201 Bender Mirror arm adjustment V-2202 Bender S-arm adjustment V-2203 Bender Release arm adjustment (aux. shutter) V-2205 Bender Supporting tool when using V-2201 V-2206 Winding knob Substitutes regular winding crank during r ...

  • Hasselblad 10026 - page 8

    T ools Camera body 503CW October 1996 Revision 0 T ool No . Description Used for 2:2 V-5423 Riveting jig Replacement of aux. shutter flaps V-5942 Exp. gauge Release mechanism adjustment 902474 Test box ELX/CX Calibration of the TTL flash meter 902658 Key angle gauge Adjustment of the front key angle (V-2075) 904644 Bayonet plate Stop lever adjustme ...

  • Hasselblad 10026 - page 9

    January 2001 Camera body 503CW Disassembly 3:1 Revision 1 Camera shell Remove the lens, film magazine, view finder, focusing screen and winding knob. Remove the screw (830060), coupling (22767) and washer (22799). Remove the leather (13374), shim (22473), screw (822701) and ISO selector knob (22495). Do not damage the sliding contacts. Remove the c ...

  • Hasselblad 10026 - page 10

    May 2000 Camera body 503CW Disassembly Revision 2 Circuit board (22575) *22882 C A UTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Lift the chassis connector out of the hole in which it is seated in the left hand wall. Remove the two screws (820325) that secure the photodiode. Gently ...

  • Hasselblad 10026 - page 11

    Camera body 503CW Disassembly October 1996 Revision 0 3:3 F ocusing screen frame (22812) Remove the two remaining screws (820015) holding the focusing screen frame to the right hand wall and lift the frame off. Right hand wall (21095-1) Remove (or cut) the foam plastic pad (22582) to get access to the three screws (820014). Remove the right hand wa ...

  • Hasselblad 10026 - page 12

    DIS10.EPS Camera body 503CW Disassembly 3:4 May 2000 Revision 1 Remove the lower (13101) and the upper (13100) connecting rods and dismantle the remaining parts on the mechanism in the following order. Fig. 8. 1. Screws (820016) 2 pcs 2. Bearing bracket (13171) and nut (13116) 3. Gear wheel (13167) 4. Screw (822605) 5. Lid (14280) 6. Gear (22699) N ...

  • Hasselblad 10026 - page 13

    DIS10.EPS Camera body 503CW Reassembly May 2000 Revision 1 4:1 The lubricants mentioned in the text are: Grease = Isoflex Topas L32 Oil = Isoflex PDP 48 Gear housing (30324) Lubricate carefully the washer (810840) with oil. Lubricate with grease and fit (incl. the above mentioned washer) the ratchet wheel (20924) into the front section of the gear ...

  • Hasselblad 10026 - page 14

    Camera body 503CW Reassembly May 2000 Revision 2 4:2 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Gear alignment 13182 22699 14280 822605 Gear housing 13167 13171 13116 820016 Mount the gear housing (30324) to the mechanism plate. On the reverse side of the mechanism plate lubricate the hub with grease and fit the shutter stop bar (20912) spring (816802), washe ...

  • Hasselblad 10026 - page 15

    Camera body 503CW Reassembly May 2000 Revision 1 4:3 Fitting the mechanism plate to the right hand wall On the mechanism plate fit the upper and lower connecting rods to the pins on the gear wheels. (13100) for the upper shutter and (13101) for the lower shutter. Lubricate with grease. Position the auxiliary shutter stop (22436) in place. Place the ...

  • Hasselblad 10026 - page 16

    Camera body 503CW Reassembly January 2001 Revision 1 4:4 Fig. 19 Fig. 20 Fig. 21 Fig. 22 13355 13362 13280 13356-1 816720 30727 Cover 22813 814827 13108 821631 Fit the stop lever (13355) and spring (816752) to the pre-greased hub. Secure with the clip (817119). Lubricate the hub (13108) with grease and place a shim onto it. This shim can be in seve ...

  • Hasselblad 10026 - page 17

    Camera body 503CW Reassembly October 1996 Revision 0 4:5 Rear plate (30300) Fitting the rear plate Fig. 23 and 24. Lubricate the shutter driving arm ’ s shaft hub and the mirror ’ s moving peg with grease. Connect the arm and the connecting rods and fix the rear plate into the chassis. Ensure that the mirror actuating lever grips the pin on the ...

  • Hasselblad 10026 - page 18

    Camera body 503CW Reassembly October 1996 Revision 0 4:6 F ront plate (30777) Fitting the front bayonet plate to the camera body Tension the drive spring by turning the outer gear wheel clockwise four turns. The front key will be positioned at the red index dot. A locking pin can be inserted through the inner cog wheel and the bracket to prevent th ...

  • Hasselblad 10026 - page 19

    Camera body 503CW Adjustment October 1996 Revision 0 5:1 The lubricants mentioned in the text are: Grease = Isoflex Topas L32 Oil = Isoflex PDP 48 Install the winding knob V-2206 and tension the auxiliary shutter spring (30384) by releasing the pawl (20919). Turn the knob clockwise and tension the spring two turns at this time. Test the camera ’ ...

  • Hasselblad 10026 - page 20

    Camera body 503CW Adjustment October 1996 Revision 0 5:2 F ocal length The camera body ’ s focal length is inspected and adjusted by using tool V-2229. The focal length is 71.40 mm ± 0.03 mm. Zero the dial indicator by placing it on surface ” A ” . Mount the front plate ” B ” into the front bayonet of the camera. Connect the camera to th ...

  • Hasselblad 10026 - page 21

    Camera body 503CW Adjustment October 1996 Revision 0 5:3 Adjustment No. 1 (Overtravel) With the film winding mechanism tensioned, check the angle 15-16 o with the bayonet plate tool 904644 pushed hard against the stop arm (13355). Measure the angle with a spring tension of 300 gm/cm. Adjust by altering the position of the bearing bracket (13171). W ...

  • Hasselblad 10026 - page 22

    Camera body 503CW Adjustment October 1996 Revision 0 5:4 Adjustment of the release mechanism Check that the release bar (30375) is free from the signal arm pawl. Adjust by carefully bending the forward part of the signal arm. Use tool V-2200. Minimum free play: 0.2 mm. With the camera fully cocked the release bar should protrude a maximum of 0.9 mm ...

  • Hasselblad 10026 - page 23

    Camera body 503CW Adjustment October 1996 Revision 0 5:5 The push rod (22369) is adjusted so that it is set 0.15 mm below the release bar (30375) forward angle setting. Check by using the tool V-5942. Adjust by gently bending (22369). Fig. 37. Position tool V-5942 as shown and press against the front plate. The mechanism should not release. When th ...

  • Hasselblad 10026 - page 24

    Camera body 503CW Adjustment October 1996 Revision 0 5:6 Adjustment of the release sequence Make sure the winding knob V-2206 and the bayonet plate tool 904644 are installed. Release the camera and keep it released by holding the release bar and push rod back. Move the release bar and push rod to the front slowly and observe the closing sequence. F ...

  • Hasselblad 10026 - page 25

    Camera body 503CW Adjustment October 1996 Revision 0 5:7 Operate the winding knob V-2206 to cock the shutter. Check that the bayonet plate tool 904644 is blocked by the stop lever (22769) when the camera is completely cocked. Adjust by bending the front of the lever. The lever engagement should be retained until the camera is fully released. Fig. 4 ...

  • Hasselblad 10026 - page 26

    Camera body 503CW Adjustment May 2000 Revision 3 Fitting the Circuit board (22575) *22882 C A UTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Put the insulating plate (22746) in position and place the circuit board on top of it. Secure the board by first fitting the two screws (82001 ...

  • Hasselblad 10026 - page 27

    Camera body 503CW Adjustment January 2001 Revision 1 5:9 Adjust the lower rear plate/shell alignment and tighten the two rear screws (829755)and seal with loctite. Fit and tighten the two front screws (820781). Check the upper edge alignment of rear plate and shell. Adjust, if necessary, the two screws (825760) which are accessible behind the leath ...

  • Hasselblad 10026 - page 28

    Camera body 503CW Adjustment January 2001 Revision 1 Check the mirror 45 o angle using the sighting tube which fits in the holder on the gauge. Tighten the locking screw. Shine a light source towards the oval cut-out in the upper part of the tube so that the white ring of the ocular is illuminated. When the mirror is at 45 o the pattern in the sigh ...

  • Hasselblad 10026 - page 29

    Camera body 503CW Adjustment October 1996 Revision 0 5:11 Check the camera functions. Check that the auxiliary shutter is clear of the internal covers. Check the release sequence using a micrometer V-2354. Mount the micrometer in the exposure button ’ s cable release socket. Carefully screw in the micrometer ’ s screw until the camera releases. ...

  • Hasselblad 10026 - page 30

    Camera body 503CW Adjustment June 1998 Revision 1 5:12 Calibration and control of the flash metering system TTL Control/calibration should be carried out each time the camera has been in for repair. The tolerance for the flash meter is ±0.3 EV at all settings. If the Hasselblad Service System 970600 is used, follow the step by step instruction in ...

  • Hasselblad 10026 - page 31

    Camera body 503CW Adjustment June 1998 Revision 1 Calibration On pressing the MEASURE button one of the three LED ´ s will light. The variable resistor in the camera (access behind the leather beside the ISO dial) should be turned so that the green LED lights when the MEASURE button is pressed again. If the red LED lights, the resistor is turned a ...

  • Hasselblad 10026 - page 32

    Camera body 503CW October 1996 Revision 0 6:1 F ront bayonet plate F ront plate reassembly Fit the four bayonet tongues (103439) and secure with eight screws (820425). Fit the release button return spring (21096) with one screw (820015). Behind the front plate glue the two sponge seals (13212) and (13213) as well as the foils (22829) and (22832) in ...

  • Hasselblad 10026 - page 33

    Camera body 503CW October 1996 Revision 0 6:2 The hole for the locating pin (812202) is bored with 1.15 mm drill. Use tool V-2211 for driving in the pin. Drive the pin in until the face of the tool touches the front bayonet plate. When a new front plate is installed the hole must be drilled using tool 902658 (V-2075), which is equipped with two dri ...

  • Hasselblad 10026 - page 34

    Camera body 503CW October 1996 Revision 0 6:3 A uxillary shutter & Mirror Exchanging the mirror (22775) Release the camera. Inside the mirror box, remove the clip "A" and disengage the arm (22781) from the mirror frame. Remove the washer (810649) located behind the arm and the frame. Remove the sleeve (22800). Fig. 58. Carefully wind ...

  • Hasselblad 10026 - page 35

    Camera body 503CW October 1996 Revision 0 6:4 Remount the mirror frame and the upper shutter flap by holding the frame in position and aligning the upper shutter flap to the bearing holes. Push in both bearing hubs and centralise the mirror and shutter flap side movement by using shim washers. These come in two thicknesses 0.10 and 0.20 mm (810503) ...

  • Hasselblad 10026 - page 36

    BOD50301.EPS 970512 COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 anders@aeillustr.se 7 Camera body 503CW May 1997 Revision 1 14 2 3 4 5 6 7 8 9 10 12 13 15 16 17 18 19 15 20 21 23 22 24 25 26 27 28 29 30 31 32 35 36 37 38 40 41 42 43 44 45 47 48 49 50 51 52 53 54 55 11 14 39 ...

  • Hasselblad 10026 - page 37

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 7 June 1998 Revision 2 1 1 40 393 Shell, complete (chrome) Part No. 40394 (black) 2 1 30 762 Support, right 3 1 105 872 Tape 4 1 30 760 Support, left 5 1 105 870 Tape 6 2 831 502 Rivet 7 1 40 387 Support 8 1 103 504 Leather 9 1 105 509 Leather 10 6 829 304 Screw 11 1 103 387 Bayonet 12 ...

  • Hasselblad 10026 - page 38

    BOD50302.E P 00050 COPYRIGHT ANDERS ENGSTR 430 91 H tel/fax 031- anders@aeillustr.se Camera body 503CW 8 May 2000 Revision 2 2 4 3 5 6 7 8 9 12 16 17 18 19 20 21 22 1 10 11 13 15 23 24 25 26 27 28 29 30 31 32 14 ...

  • Hasselblad 10026 - page 39

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 8 May 2000 Revision 2 1 1 30 324 Gear housing Complete 2 1 830 060 Screw 3 1 820 415 Screw 4 1 22 767 Coupling 5 1 22 799 Washer Alternatively 2 pcs 6 2 820 020 Screw 7 1 816 507 Spring 8 1 13 170 Adjustable pawl 9 1 820 019 Screw 10 1 20 924 Ratchet wheel 11 1 810 840 Washer 12 1 30 3 ...

  • Hasselblad 10026 - page 40

    BOD50303.EPS 970515 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 9 May 1997 Revision 1 Camera body 503CW 1 2 3 4 5 6 7 8 10 12 14 16 17 18 19 15 23 22 24 26 25 27 28 29 30 31 32 33 34 35 36 37 9 11 20 21 39 40 41 38 13 ...

  • Hasselblad 10026 - page 41

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 9 May 1997 Revision 1 1 1 822 605 Screw 2 1 810 836 Washer 3 1 22 287 Damping ring 4 1 14 280 Lid 5 1 14 278 O-ring 6 1 30 384 Spring 7 1 22 699 Gear 8 1 810 953 Washer (0.3 mm) 9 1 820 015 Screw 10 1 823 015 Screw 11 1 21 125 Mechanism plate 12 1 13 182 Gear 13 1 810 404 Washer (0.3 m ...

  • Hasselblad 10026 - page 42

    BOD50304.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 503CW 10 September 1999 Revision 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 10 31 32 ...

  • Hasselblad 10026 - page 43

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 10 September 1999 Revision 1 1 1 30 300 Rear plate, complete State serial No. 2 1 40 237 Rear plate State serial No. 3 1 816 805 Spring 4 1 816 804 Spring 5 1 13 125 Light trap 6 2 821 203 Screw 7 2 13 397 Foam plastic strip 8 4 810503 Washer (0.10 mm) For adjustment 810 505 (0.20 mm) ...

  • Hasselblad 10026 - page 44

    BOD50305.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se September 1999 Revision 2 11 Camera body 503CW 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14 17 16 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 36 31 37 35 38 ...

  • Hasselblad 10026 - page 45

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 11 September 1999 Revision 2 1 1 30 777 Front bayonet plate Complete 2 1 40 403 Front bayonet plate 3 1 30 383 Front gear 4 1 30 386 Governor 5 2 820 014 Screw 6 1 821 009 Screw 7 1 820 018 Screw 8 1 812 202 Pin 9 2 823 440 Screw 10 1 105 107 Cover plate 11 1 810 409 Spacer 12 1 816 85 ...

  • Hasselblad 10026 - page 46

    BOD50306.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 12 Camera body 503CW September 1999 Revision 1 2 1 3 4 5 7 8 9 6 10 11 12 13 14 15 16 17 19 18 ...

  • Hasselblad 10026 - page 47

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 12 September 1999 Revision 1 1 1 30 686 Bottom plate 2 1 30 375 Release bar 3 1 814 512 Spring 4 1 22 717 Signal arm 5 1 814 603 Spring 6 1 21095 Inner wall, right 7 1 817 119 Clip 8 6 820 014 Screw 9 1 13 356 Mirror catch 10 1 816 720 Spring 11 1 30 727 Cover 12 1 814 827 Spring 13 1 ...

  • Hasselblad 10026 - page 48

    BOD50307.EPS 960806 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 503CW 13 October 1996 Revision 0 3 2 1 6 5 4 7 8 7 9 10 11 12 13 ...

  • Hasselblad 10026 - page 49

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 13 May 2000 Revision 2 1 1 22 577 Clip 2 1 22576 Bracket 3 2 823 335 Screw 4 1 22 470 Socket cap 5 1 22 575 PC board See below 6 1 22 746 Insulating plate 7 3 820 011 Screw 8 1 12 453 Cable holder 9 1 22 453 Attachment 10 2 820 015 Screw 11 1 40 397 Inner wall, left 12 1 22 815 Reflect ...

  • Hasselblad 10026 - page 50

    BOD50308.EPS 960710 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 14 Camera body 503CW October 1996 Revision 0 1 2 3 4 5 6 7 8 9 11 10 ...

  • Hasselblad 10026 - page 51

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 14 October 1996 Revision 0 1 2 103 517 Leather 2 1 815 904 Spring 3 1 815 707 Spring 4 1 103 516 Washer 5 1 103 113 Crank bayonet 6 1 107 409 Crank support 7 4 829 540 Screw 8 1 103 151 Crank arm 9 1 103 514 Slide 10 1 812 301 Pin 11 1 22 683 Rubber plug ...

  • Hasselblad 10026 - page 52

    BOD50101.EPS 970515 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 15:1 May 1997 Camera body 501C Revision 1 2 3 4 1 ...

  • Hasselblad 10026 - page 53

    Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:1 October 1996 Revision 0 1 1 40 384 Shell, complete 2 2 22 782 Name plate 3 1 103 592 Leather 4 1 103 529 Accessory rail Spare parts not listed are the same as for 503CW ...

  • Hasselblad 10026 - page 54

    501CM02.EPS 970514 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 501C 15:2 May 1997 Revision 1 4 3 2 5 1 ...

  • Hasselblad 10026 - page 55

    Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:2 May 1997 Revision 1 Spare parts not listed are the same as for 503CW 1 1 13 355 Stop lever 2 1 22 799 Washer Alternatively none or 1 pc 3 1 412 401 Spacer 4 1 830 061 Screw 5 1 412 103 Coupling New type of winding crank from camera serial No.17EU10379 ...

  • Hasselblad 10026 - page 56

    BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 15:3 Camera body 501C May 1997 Revision 1 1 2 3 4 5 6 ...

  • Hasselblad 10026 - page 57

    Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:3 May 1997 Revision 1 Spare parts not listed are the same as for 503CW -3 1 1 30 519 Rear plate, complete State serial No. 2 2 20 958 Mirror assembly 3 1 20 901 Mirror protection 4 3 13 141 Foam plastic pad 5 1 20 854 Mirror 6 1 20 956 Frame ...

  • Hasselblad 10026 - page 58

    BOD50103.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 15:4 Camera body 501C May 2000 Revision 3 1 2 3 4 5 6 7 8 9 10 ...

  • Hasselblad 10026 - page 59

    Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:4 May 2000 Revision 3 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl. light seals 6 1 13 351 Foam plastic strip 7 1 13 211 Foam plastic strip 8 1 22 429 Foam plastic strip 9 1 22 873 Reflectio ...

  • Hasselblad 10026 - page 60

    BOD50104.EPS 970512 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 501C 15:5 May 1997 Revision 1 1 2 ...

  • Hasselblad 10026 - page 61

    Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:5 May 1997 Revision 1 1 1 22 750 Coupling 2 1 22 751 Crank support Spare parts not listed are the same as for 503CW ...

  • Hasselblad 10026 - page 62

    503CXi01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 503CXi 16:1 October 1996 Revision 0 1 ...

  • Hasselblad 10026 - page 63

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:1 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 2 22 771 Name plate ...

  • Hasselblad 10026 - page 64

    BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 16:2 Camera body 503CXi October 1996 Revision 0 1 2 3 4 5 6 ...

  • Hasselblad 10026 - page 65

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No. 2 2 20 958 Mirror assembly 3 1 20 901 Mirror protection 4 3 13 141 Foam plastic pad 5 1 20 854 Mirror 6 1 20 956 Frame ...

  • Hasselblad 10026 - page 66

    503CXi03.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 16:3 Camera body 503CXi May 2000 Revision 2 1 2 3 4 5 6 7 8 9 10 ...

  • Hasselblad 10026 - page 67

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:3 May 2000 Revision 2 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl. light seals 6 1 13 351 Foam plastic strip 7 1 13 211 Foam plastic strip 8 1 22 429 Foam plastic strip 9 1 22 873 Reflect ...

  • Hasselblad 10026 - page 68

    503CX01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 17:1 Camera body 503CX October 1996 Revision 0 9 1 2 3 4 5 7 8 10 11 12 13 14 17 16 15 18 16 6 ...

  • Hasselblad 10026 - page 69

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:1 October 1996 Revision 0 1 1 40 346 Shell, complete (chrome) Part No. 40347 (black) 2 1 103 506 Leather 3 1 103 327 Support 4 1 103 503 Leather 5 1 20 948 Socket 6 1 13 418 Plate spring 7 1 13 417 T-arm 8 1 816 759 Spring 9 1 821 206 Screw 10 1 13 134 Release button 11 1 22 367 Buf ...

  • Hasselblad 10026 - page 70

    503CX02.EPS 961025 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 503CX 17:2 October 1996 Revision 0 1 2 3 4 ...

  • Hasselblad 10026 - page 71

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 821 806 Screw 2 1 13 436 Locking washer 3 1 13 163 Bayonet plate 4 1 13 360 Shim, 0.2 mm For adjustment 13360-01, 0.4 mm ...

  • Hasselblad 10026 - page 72

    BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 17:3 Camera body 503CX October 1996 Revision 0 1 2 3 4 5 6 ...

  • Hasselblad 10026 - page 73

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:3 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No. 2 2 20 958 Mirror assembly 3 1 20 901 Mirror protection 4 3 13 141 Foam plastic pad 5 1 20 854 Mirror 6 1 20 956 Frame ...

  • Hasselblad 10026 - page 74

    503CX03.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 17:4 Camera body 503CX May 2000 Revision 2 1 2 3 4 5 6 7 8 11 9 10 ...

  • Hasselblad 10026 - page 75

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:4 May 2000 Revision 2 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl. light seals 6 1 13 351 Foam plastic strip 7 1 13 211 Foam plastic strip 8 1 22 429 Foam plastic strip 9 1 22 873 Reflecti ...

  • Hasselblad 10026 - page 76

    COPYRIGHT © 1994 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö TEL / FAX 031- 96 84 64 503CX04.EPS 961031 Camera body 503CX 17:5 October 1996 Revision 0 1 Mounted on the mechanism plate 1 2 3 5 4 6 7 8 9 ...

  • Hasselblad 10026 - page 77

    Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:5 October 1996 Revision 0 1 1 402 411 Catch 2 1 402 412 Spring 3 1 402 414 Bayonet plate 4 4 824 602 Screw 5 1 402 321 Crank support 6 1 815 856 Spring 7 1 402 413 Button 8 1 14 221 Leather 9 1 13 355 Stop lever Mounted on the mechanism plate Spare parts not listed are the same as f ...

  • Hasselblad 10026 - page 78

    500CM01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 18:1 Camera body 500C/M (Classic) October 1996 Revision 0 9 1 2 3 4 5 7 6 8 10 11 12 13 14 15 16 17 20 19 18 21 19 ...

  • Hasselblad 10026 - page 79

    Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:1 October 1996 Revision 0 1 1 40 309 Shell, complete (chrome) Part No. 40308 (black) 2 1 103 506 Leather 3 1 103 327 Support 4 1 103 503 Leather 5 1 20 948 Socket 6 1 13 418 Plate spring 7 1 13 417 T-arm 8 1 816 759 Spring 9 1 821 206 Screw 10 1 13 134 Release button 11 1 ...

  • Hasselblad 10026 - page 80

    503CX02.EPS 961025 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se Camera body 500C/M (Classic) 18:2 October 1996 Revision 0 1 2 3 4 ...

  • Hasselblad 10026 - page 81

    Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 821 806 Screw 2 1 13 436 Locking washer 3 1 13 163 Bayonet plate 4 1 13 360 Shim, 0.2 mm For adjustment 13360-01, 0.4 mm ...

  • Hasselblad 10026 - page 82

    BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se 18:3 Camera body 500C/M (Classic) October 1996 Revision 0 1 2 3 4 5 6 ...

  • Hasselblad 10026 - page 83

    Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:3 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No. 2 2 20 958 Mirror assembly 3 1 20 901 Mirror protection 4 3 13 141 Foam plastic pad 5 1 20 854 Mirror 6 1 20 956 Frame ...

  • Hasselblad 10026 - page 84

    500CM02.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 18:4 Camera body 500C/M (Classic) May 2000 Revision 2 1 2 3 4 5 6 7 8 11 9 10 ...

  • Hasselblad 10026 - page 85

    Description Pos No. Pcs Spare Part No. Remark 18:4 Camera body 500C/M (Classic) May 2000 Revision 2 Spare parts not listed are the same as for 503CW -01 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl. light seals 6 1 13 351 Foam plastic strip 7 1 13 211 Foam ...

  • Hasselblad 10026 - page 86

    COPYRIGHT © 1994 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö TEL / FAX 031- 96 84 64 503CX04.EPS 961031 Camera body 500C/M (Classic) 18:5 October 1996 Revision 0 1 Mounted on the mechanism plate 1 2 3 5 4 6 7 8 9 ...

  • Hasselblad 10026 - page 87

    Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:5 January 2001 Revision 1 1 1 402 411 Catch 2 1 402 412 Spring 3 1 402 414 Bayonet plate 4 4 824 602 Screw 5 1 402 321 Crank support 6 1 815 856 Spring 7 1 402 413 Button 8 1 14 221 Leather 9 1 13 355 Stop lever Mounted on the mechanism plate Spare parts not listed are th ...

  • Hasselblad 10026 - page 88

    501CM01.EPS 970513 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se May 1997 19:1 Camera body 501CM Revision 0 2 3 4 1 ...

  • Hasselblad 10026 - page 89

    Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:1 October 1997 Revision 1 Spare parts not listed are the same as for 503CW 1 1 40 407 Shell, complete (Chrome) Part No. 40408 (black) 2 2 22 862 Name plate 3 1 103 592 Leather 4 1 103 529 Accessory rail ...

  • Hasselblad 10026 - page 90

    501CM02.EP 00050 9 COPYRIGHT ANDERS ENGSTR 430 91 H tel/fax 031- anders@aeillustr.se Camera body 501CM 19:2 May 2000 Revision 1 4 3 2 5 1 ...

  • Hasselblad 10026 - page 91

    Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:2 May 1997 Revision 0 Spare parts not listed are the same as for 503CW 1 1 13 355 Stop lever 2 1 22 799 Washer Alternatively none or 1 pc 3 1 412 401 Spacer 4 1 830 061 Screw 5 1 412 103 Coupling ...

  • Hasselblad 10026 - page 92

    501CM03.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.se September 1999 Camera body 501CM 19:3 Revision 1 2 1 3 4 ...

  • Hasselblad 10026 - page 93

    Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:3 September 1999 Revision 1 Spare parts not listed are the same as for 503CW 1 2 22 865 Light shield 2 1 22 806 Frame, complete 3 1 22 873 Reflection protector 4 1 22 892 Cover Incl. reflection protector 22 873 ...

Manufacturer Hasselblad Category Film Camera

Documents that we receive from a manufacturer of a Hasselblad 10026 can be divided into several groups. They are, among others:
- Hasselblad technical drawings
- 10026 manuals
- Hasselblad product data sheets
- information booklets
- or energy labels Hasselblad 10026
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hasselblad 10026.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hasselblad 10026, service manual, brief instructions and user manuals Hasselblad 10026. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hasselblad 10026.

Similar manuals

A complete manual for the device Hasselblad 10026, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hasselblad 10026 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hasselblad 10026.

A complete Hasselblad manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hasselblad 10026 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hasselblad 10026, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hasselblad 10026, that we can find in the current document
3. Tips how to use the basic functions of the device Hasselblad 10026 - which should help us in our first steps of using Hasselblad 10026
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hasselblad 10026
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hasselblad 10026 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hasselblad 10026?

Use the form below

If you did not solve your problem by using a manual Hasselblad 10026, ask a question using the form below. If a user had a similar problem with Hasselblad 10026 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)