English dropdown-ico

Manual N-Tron 300

13 pages 0.51 mb
Download

Go to site of 13

Summary
  • N-Tron 300 - page 1

    12/29/2005 1 300 Series Media Converter & Industrial Ethernet Switches Installation Guide ...

  • N-Tron 300 - page 2

    12/29/2005 2 Industrial Ethernet Switch In stallation Guid e 302MC-XX 302MCE-XX-YY 304TX 305FX-XX 305FXE-XX-YY 306TX 306FX2-XX 306FXE2-XX-YY 308TX Where: XX = ST or SC and YY = -15, -40, or -80 ...

  • N-Tron 300 - page 3

    12/29/2005 3 Copyright, © N-TRON Corp., 2005 820 S. University Blvd., Suite 4E Mobile, AL 36609 USA All rights reserved. Reproduction, adaptation, or translation without prior written permission from N-TRO N Corp. is prohibited, except as allowed under copyright laws. Ethernet is a registered trademark of Xerox Co rporation. All other product name ...

  • N-Tron 300 - page 4

    12/29/2005 4 Safety Warnings ELECTRICAL SAFETY WARNING: Disconnect the power cable before removing the enclosure top. WARNING: Do not operate the unit with the top cover removed. WARNING: Do not work on equipment or cables during periods of lightning activity. WARNING: Do not perform any services on the unit unless qualified to do so. WARNING: Do n ...

  • N-Tron 300 - page 5

    12/29/2005 5 Hazardous Location Installation Requirements 1. WARNING! Do not disconnect while circuit is live, unless area is known to be non-hazardous. 2. WARNING! Install only in accordance with Local & National Codes of Authorities Having Jurisdiction. 3. Class I, Div 2 Installations require that power con nections must be current limited at ...

  • N-Tron 300 - page 6

    12/29/2005 6 300 Series Industrial Ethernet Switches The 300 Series Unmanaged Indu strial Ethernet Switches support high speed layer 2 switching between p orts. All N-TRON 300 Series switches are housed in a ruggedized steel enclosure, an d provide Category-5 compliant 10/100-BaseT connections for high performance network design, and hub/repeater u ...

  • N-Tron 300 - page 7

    12/29/2005 7 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 300 Series Unit 2. N-Tron Product CD Contact your carrier if any items are damaged. INSTALLATION Read the following warning before beginning the installation: WARNING FXE units contain a class 1 laser. Do not stare into the laser beam (fiber ...

  • N-Tron 300 - page 8

    12/29/2005 8 DIN-Rail Mounting Install the unit in a standard DIN-Rail. Recess the unit to allow at least 5” of horizontal clearance for fiber optic cable bend radius (2” for TX models). To install t he unit to 35mm in dustrial DIN-Rail, place the top edge of the included mounting bracket on the back of the unit against the DIN-Rail at a 15° a ...

  • N-Tron 300 - page 9

    12/29/2005 9 FRONT PANEL LNK Link LED for Fiber Optic Ports TX Fiber Optic Transmit Ports RX Fiber Op tic Receive Ports ACT Activity LED for Fiber Optic Ports RJ45 Ports Po rts 1-4 Auto sensing 10/100BaseT Connections Green LED lights when Power is connected NOTE: Each RJ45 data port has two LED’s for each connector. The lower LED indicates LINK ...

  • N-Tron 300 - page 10

    12/29/2005 10 APPLYING POWER (Top View) Unscrew & Remove the DC Voltage Input Plug from the top header. Install the DC Power Cables into the Plug (observing polarity on unit). Plug the Voltage Input Plug back into the top header. All LED’s will flash ON Momentarily Verify the Power LED stays ON (GREEN). Note: Either V1 or V2 can be connected ...

  • N-Tron 300 - page 11

    12/29/2005 11 TROUBLESHOOTING 1. Make sure the (Power LED) is ON. 2. Verify that Link LED’s are ON for connected ports. 3. Verify cabling used between stations. 4. Verify that cabling is Category 5 (or greater) for 100Mbit Operation. 5. Verify TX is connected to far end RX and vise versa (fiber optic units only). SUPPORT Contact N-TRON Corp. at: ...

  • N-Tron 300 - page 12

    12/29/2005 12 KEY SPECIFICATIONS Physical Height: 3.98” (max.) Width: 2.01” (max.) Depth: 4.19” (max.) Weight: 0.75 lbs. Electrical Input Voltage: 10-30 VDC (Regulated) Input Current: 290mA max. @ 24VDC (Steady State) Inrush Current: 8.0A mp/0.6ms max. @ 24VDC Input Ripple: Less than 100 mV Input Wire Size: 16-28 AWG Environmental Operating T ...

  • N-Tron 300 - page 13

    12/29/2005 13 N-TRON Limited Warrant y N-TRON, Corp. warr ants to the end use r that this hardware product wil l be free from defects in workmanship a nd mate rials, under normal use and service, f or the applicable warranty period from the data o f purchase from N-TRON or its authorized reseller. If a product does not operate as warranted during t ...

Manufacturer N-Tron Category Switch

Documents that we receive from a manufacturer of a N-Tron 300 can be divided into several groups. They are, among others:
- N-Tron technical drawings
- 300 manuals
- N-Tron product data sheets
- information booklets
- or energy labels N-Tron 300
All of them are important, but the most important information from the point of view of use of the device are in the user manual N-Tron 300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals N-Tron 300, service manual, brief instructions and user manuals N-Tron 300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product N-Tron 300.

Similar manuals

A complete manual for the device N-Tron 300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use N-Tron 300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of N-Tron 300.

A complete N-Tron manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual N-Tron 300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the N-Tron 300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the N-Tron 300, that we can find in the current document
3. Tips how to use the basic functions of the device N-Tron 300 - which should help us in our first steps of using N-Tron 300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with N-Tron 300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of N-Tron 300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning N-Tron 300?

Use the form below

If you did not solve your problem by using a manual N-Tron 300, ask a question using the form below. If a user had a similar problem with N-Tron 300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)