English dropdown-ico

Manual Life Fitness SM83

24 pages 2.73 mb
Download

Go to site of 24

Summary
  • Life Fitness SM83 - page 1

    M051-K50-B105 1 8 STA CK MULTI-JUNGLE (SM83) WITH 3 A DJUSTA BLE PULLEYS UNPA CKING A ND A SSEMBLY INSTRUCTIONS ...

  • Life Fitness SM83 - page 2

    SM83 U npacking & Assembly Instructions 2 The SM83 c om es partially assem bled. Follow the steps below to com plete the as sem bly. WA RNING: COMPONENTS O F THE SM83 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING T HIS MACHINE. MA TERIA LS A ND TOOLS REQUIRED FOR A SSEMBL Y 1/2”, 3/8”, 5/8” & 9/16” Sock et wrench with 10” long ...

  • Life Fitness SM83 - page 3

    SM 83 Unpacking & Assembly Instr uctions 3 UNPA CKING Follow the steps below when unpacking the c om ponents of the SM83. 1. Cut off the shipping wrapper. 2. Remove th e parts boxes an d shippin g boards. 3. Remove the item s in the parts box es. Thes e item s are s hown in Figure 1. A. Remove the bolts bag. B. Remove the par ts shown below. Pa ...

  • Life Fitness SM83 - page 4

    SM83 U npacking & Assembly Instructions 4 A SSEMBLY Figure 2 shows an ass em bled SM83. Figure 2. SM83 main components (seats and cables remov ed for clarity). 1. Cubes (2) 2. Low row bench (2) 3. Lat bench ( 2) 4. Connecting beam (1) 5. Lat tops (2) 6. T ricep top (1) 7. Adj. X -over top (1) 8. 300 lb. W eight stack s (4) 9. 190 lb. W ei g ht ...

  • Life Fitness SM83 - page 5

    SM 83 Unpacking & Assembly Instr uctions 5 Figure 3. Set t he w eight stack cu bes. 2. Bolt on the teardrop pulley assem blies above the benches ( see Figure 4) on both cubes using two 3/8” x 2-3/4” hex head bolts . Include the 3/8” flat washer, end c ap washers, end caps and 3/8” Nyloc (locknut) . Use the bolt conf iguration shown in F ...

  • Life Fitness SM83 - page 6

    SM83 U npacking & Assembly Instructions 6 Figure 4. Bolt on the te ardrop pulleys. Figure 5. Configura tion for 2-3/4” and 3” bolts. 3. Using a 5/8” soc ket with long extens ion and com bination wrench, bolt on the connecting beam to the cubes using two of the large 7/16” x 6” bolts, 7/16” washers, and 7/16” nuts, end cap washer s ...

  • Life Fitness SM83 - page 7

    SM 83 Unpacking & Assembly Instr uctions 7 7/16” x 6” (2)- mount on t ops Remove pul leys fro m housi ngs to give clear ance to socket ex tension Figure 6. Bolt on the c onnecting beam. ...

  • Life Fitness SM83 - page 8

    SM83 U npacking & Assembly Instructions 8 4. Using a 5/8” soc ket and c om bination wrench, m ount the 56” lat tops (par t T f rom HARDWARE sec tion) to the cells by inserting two of the large 7/16” by 6” bolts using the hardware configur ation shown in Figure 8. Mount the 29” tric ep top (part U in HARDWARE sec tion) and adjus table ...

  • Life Fitness SM83 - page 9

    SM 83 Unpacking & Assembly Instr uctions 9 Figure 9. Mount rubber bumpers and the w eight stacks. 5. Install the weight stack s. T o do this: A. Using a 9/16” soc ket and c om bination wrench, rem ove the tric ep back rest bolts (see Figure 10) . B. Using a 9/16” soc ket and c om bination wrench, unbolt the top plate and rem ove the guide r ...

  • Life Fitness SM83 - page 10

    SM83 U npacking & Assembly Instructions 10 C. Prepare the w eight stack. Slide the guide rods ( 2) through the weight stack s (1) as shown below. Place rubber bum pers (3) on the bottom s of each guide rod. Make s ure the pull pin (4) is in the bottom weight plate. D. Flip ov er the w eight stacks. W hen shipped, the weight stac ks have the pul ...

  • Life Fitness SM83 - page 11

    SM 83 Unpacking & Assembly Instr uctions 11 6. Using a 7/8” com bination wrenc h, bolt the floating pulleys into the 190 lb weight stack s (ex cept f or the tricep pus hdown weight stack- the one with the tricep back rest mounted to the f ram e as s hown in Figure 10). You will need to remove the pulley from the housing to thread the plug int ...

  • Life Fitness SM83 - page 12

    SM83 U npacking & Assembly Instructions 12 8. Mount the seated row and lat benches to the f ram e. Using the bolts specif ied in Figure 14 and a 9/16” soc ket and c om bination wrenches, m ount the benches as shown in Figures 14 and 15. Figure 14. Mount the benche s to the frame. Figure 15. Bolt t he benches to the frame. ...

  • Life Fitness SM83 - page 13

    SM 83 Unpacking & Assembly Instr uctions 13 INSTA LLING THE CABLES The SM83 us es eight cables. T here ar e three diff erent types of cable used on the SM83. T hey are: 1. Adjustable c ross over cables (ball end cables) (3). 2. Low row cable (the long cables) (2). 3. Lat pulldown and tricep cables ( 3). The lat and tric ep cables c an be identi ...

  • Life Fitness SM83 - page 14

    SM83 U npacking & Assembly Instructions 14 ADJUSTABLE CROSSOVER CABLE RO UTI NG Once you’ve removed the pulleys as desc ribed previously, route the three adjustable cross over cables as shown in Figure 17. Figure 17. Adjustable crossov er cable routin g. ...

  • Life Fitness SM83 - page 15

    SM 83 Unpacking & Assembly Instr uctions 15 Figure 18. Adjustable crossover cab le end detail. Using a 7/8” wrench, tighten the j am nut onto the adjustable pulley threads as shown in Figure 18. Place a rubber c ap on the top of the cable as shown in Figure 18 (right) . LOW RO W CABLE RO UTING Route the low row cables as shown in Figure 19. F ...

  • Life Fitness SM83 - page 16

    SM83 U npacking & Assembly Instructions 16 Bolt the cable to the weight stack s as s hown in Figure 20. Thr ead the 7/8” nut up on the cable bolt as shown at lef t. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” com bination wrench. Figure 20. Screw the cable in to th e weigh t stack. LAT PULLDOWN ...

  • Life Fitness SM83 - page 17

    SM 83 Unpacking & Assembly Instr uctions 17 TRICEP PUSHDOW N CABLE RO UTI NG Route the tricep pushdown cable as shown in Figure 22. Screw the cable into the weight stac k as shown previously in Figure 20. Figure 22. Tricep pus hdow n cable routing. ...

  • Life Fitness SM83 - page 18

    SM83 U npacking & Assembly Instructions 18 HA RDWARE 0123456 ½½½½½½ Hardware F igure 1. Assembly Parts. ...

  • Life Fitness SM83 - page 19

    SM 83 Unpacking & Assembly Instr uctions 19 The parts shown in Hardware Figure 1 are us ed to assem ble the SM83. T hey are: A. 7/16” x 6” hex head bolt (used to bolt the tric ep top beam , adjustable c rossover top beam, lat top beam s , and connecting beam to the tops of the cubes ) B. 7/16” flat washer C. 7/16” cap washer ( used on t ...

  • Life Fitness SM83 - page 20

    SM83 U npacking & Assembly Instructions 20 The part s hown in Hardware Figure 3 is the 9/16” c able jam nut that’s used to s ecure the cables to the weight stack s. Hardware Figure 3. Cable ja m nut. M. Cable jam nut Hardware Figure 4 shows the types of cables that ar e included with the SM83. Hardware Figure 4. Cables . N. Lat pulldown cab ...

  • Life Fitness SM83 - page 21

    SM 83 Unpacking & Assembly Instr uctions 21 Hardware F igure 5. T op assemblies. S. Teardr op pulleys (bolt on above lat and seated row benches) T. 56” Lat tops (bolt to top of cells with pulleys above lat benches) U. 29” Tr icep top (bolt on to 56” lat top bar ) V. Adjustable c rossover top (bolt on to 56” lat top bar) ...

  • Life Fitness SM83 - page 22

    SM83 U npacking & Assembly Instructions 22 Hardware Figure 6. Weight stack rubber bumpers. W . W eight s tack rubber bum pers (inserted under weight stac ks ) (16) Hardware Figure 7. Floating pulle ys. X. Floating pulleys (bolt to 190 lb weight stack s other than tric ep pushdown stack ) ( 3) ...

  • Life Fitness SM83 - page 23

    SM 83 Unpacking & Assembly Instr uctions 23 PA RTS LIST Part # ID Description Quantity Main components 1 2 3 4 5 6 7 8 9 Cubes Low row bench Lat bench Connecting beam Lat tops Tr icep top Adj. cro ssover top 300 lb weight stack 190 lb weight stack 2 2 2 1 2 1 1 4 4 0017-00042-0936 0017-00103-0234 0017-00101-1408 0017-00101-1408 0017-00101-1422 ...

  • Life Fitness SM83 - page 24

    SM83 U npacking & Assembly Instructions 24 0017-00101-1413 0017-00104-0368 0017-00103-0217 Pulley hardw are (installed) 1-3/4” Bolt Cap washer 3/8” Nyloc nut 0017-00101-1413 0017-00104-0313 0017-00103-0217 Floating pulley hardware (installed) 1-3/4” Bolt Flat washer 3/8” Nyloc nut ...

Manufacturer Life Fitness Category Home Gym

Documents that we receive from a manufacturer of a Life Fitness SM83 can be divided into several groups. They are, among others:
- Life Fitness technical drawings
- SM83 manuals
- Life Fitness product data sheets
- information booklets
- or energy labels Life Fitness SM83
All of them are important, but the most important information from the point of view of use of the device are in the user manual Life Fitness SM83.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Life Fitness SM83, service manual, brief instructions and user manuals Life Fitness SM83. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Life Fitness SM83.

Similar manuals

A complete manual for the device Life Fitness SM83, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Life Fitness SM83 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Life Fitness SM83.

A complete Life Fitness manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Life Fitness SM83 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Life Fitness SM83, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Life Fitness SM83, that we can find in the current document
3. Tips how to use the basic functions of the device Life Fitness SM83 - which should help us in our first steps of using Life Fitness SM83
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Life Fitness SM83
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Life Fitness SM83 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Life Fitness SM83?

Use the form below

If you did not solve your problem by using a manual Life Fitness SM83, ask a question using the form below. If a user had a similar problem with Life Fitness SM83 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)