English dropdown-ico

Manual Jackson JPX-300NSU

47 pages 0.82 mb
Download

Go to site of 47

Summary
  • Jackson JPX-300NSU - page 1

    TECHNICAL MANUAL FOR JACKSON MODEL: JPX-300NSU Jackson MSC Inc. P.O. Box 1060 Barbourville, KY. 40906 (606) 523-9795 Fax: (606) 523-9196 www.jacksonmsc.com An Company HOT WATER SANITIZING UNDERCOUNTER DISHMACHINE August 16, 2005 P/N 7610-002-75-96 (Revision E) ...

  • Jackson JPX-300NSU - page 2

    MANUFACTURERS WARRANTY ONE YEAR LIMITED PARTS & LABOR WARRANTY ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM DEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONE YEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATE OF SHIPMENT FRO ...

  • Jackson JPX-300NSU - page 3

    REVISION REVISION DATE MADE BY APPLICABLE ECN DETAILS A 03-27-03 MAW 6698 Release to production B 11-17-03 MAW N/A Updated part numbers. C 04-29-04 MAW N/A Added 2nd Enodis logo to cover. D 04-18-05 MAW N/A Removed title “ Installation Manual for Export Units” from cover. E 08-16-05 MAW 6964, 6988 7006, 7383 Changed thermostat from 5930-121-71- ...

  • Jackson JPX-300NSU - page 4

    ii Model: Serial No.: Installation Date: Service Rep. Name: Phone No.: JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) NOMENCLATURE FOR THE MODEL COVERED IN THIS MANUAL JPX-300NSU JPX-300NSU - Hot water sanitizing, electrically-heated dishmachine, ...

  • Jackson JPX-300NSU - page 5

    iii JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) TABLE OF CONTENTS SECTION DESCRIPTION PAGE I. SPECIFICATION INFORMATION Specifications 2 Dimensions 3 II. INSTALLATION & OPERATION INSTRUCTIONS Installation Instructions 5 Electrical Installation Instructions 6 Deck Mounting of Dishmachine 7 Detergent Control 8 Operation Instru ...

  • Jackson JPX-300NSU - page 6

    THIS PAGE IS INTENTIONALLY LEFT BLANK iv ...

  • Jackson JPX-300NSU - page 7

    1 SECTION 1: SPECIFICATION INFORMATION ...

  • Jackson JPX-300NSU - page 8

    SECTION 1: SPECIFICATION INFORMATION SPECIFICATIONS PERFORMANCE/CAPABILITIES OPERATING CAPACITY (RACKS/HOUR) RACKS PER HOUR 30 DISHES PER HOUR 600 GLASSES PER HOUR 600 OPERATING CYCLE (SECONDS) WASH TIME 82 DRAIN TIME 28 RINSE TIME 10 TOTAL CYCLE TIME (MINUTES) 2 5 MINUTE TIMER OPERATING CYCLE (SECONDS) WASH TIME 262 DRAIN TIME 28 RINSE TIME 10 TOT ...

  • Jackson JPX-300NSU - page 9

    3 SECTION 1: SPECIFICATION INFORMATION DIMENSIONS DIMENSIONS Height (minimum): 33 1/4” Inside Clearance Height: 14 1/2” Height (maximum): 34 1/4” Inside Clearance Width: 20 1/4” Width: 24 1/4” Inside Clearance Depth: 21 1/4” Depth: 22 5/8” Door Open Depth: 39 1/2” Wall Clearance (minimum): 2 1/2” JPX-300NSU Technical Manual 7610-0 ...

  • Jackson JPX-300NSU - page 10

    4 SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS ...

  • Jackson JPX-300NSU - page 11

    5 SECTION 2: INSTALLATION & OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical support staff. Please have this manual with you when you call so that our staff ca ...

  • Jackson JPX-300NSU - page 12

    6 SECTION 2: INSTALLATION & OPERATION INSTRUCTIONS ELECTRICAL INSTALLATION INSTRUCTIONS ELECTRICAL POWER CONNECTION: Electrical and grounding connections must comply with the applicable portions of the National Electrical Code ANSI/NFPA 70 (latest edition) and/or other electrical codes. Disconnect electrical power supply and place a tag at the ...

  • Jackson JPX-300NSU - page 13

    7 SECTION 2: INST ALLA TION & OPERA TION INSTRUCTIONS INST ALLA TION INSTRUCTIONS (CONTINUED) DECK MOUNTING OF THE DISHMACHINE: The dishmachine must be secured in place using the deck mounting tracks and caps provided with machine. Inst all the (4) adjustable feet provided into screw holes where shipping bolt s were removed earli- er . Adjust t ...

  • Jackson JPX-300NSU - page 14

    8 SECTION 2: INSTALLATION & OPERATION INSTRUCTIONS DETERGENT CONTROL Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate. Using detergent in the proper amount can become, in time, a source of substantial savings. A qualified water treatment spe - cialist can tell you what i ...

  • Jackson JPX-300NSU - page 15

    9 SECTION 2: INSTALLATION & OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS PREPARATION: Before proceeding with the start-up of the unit, verify the following: 1. The strainer is in place and is clean. 2. That the wash and rinse arms are screwed securely into place and that their endcaps are tight. The wash and rinse arms should rotate freely. 3. ...

  • Jackson JPX-300NSU - page 16

    10 SECTION 3: PREVENTATIVE MAINTENANCE ...

  • Jackson JPX-300NSU - page 17

    JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) SECTION 3: PREVENTATIVE MAINTENANCE PREVENTATIVE MAINTENANCE The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However, this does not mean that some items will not wear out in time. There are many things that operators can ...

  • Jackson JPX-300NSU - page 18

    12 SECTION 4: TROUBLESHOOTING ...

  • Jackson JPX-300NSU - page 19

    13 SECTION 4: TROUBLESHOOTING SECTION COMMON PROBLEMS WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service personnel. Certain procedures in this section require electrical tests or measurements while power is applied to the machine. Exercise extreme caution at all times. If test points are no ...

  • Jackson JPX-300NSU - page 20

    14 SECTION 4: TROUBLESHOOTING SECTION COMMON PROBLEMS Problem: Rinse water not at required temperature range. 1. Thermometer is defective. Replace. 2. Thermostat is defective. Adjust the thermostat. Replace if necessary. Problem: Machine doesn’t drain when “POWER OFF” switch is pressed. 1. Drain solenoid clogged. Remove obstruction. 2. Defect ...

  • Jackson JPX-300NSU - page 21

    15 SECTION 5: SERVICE PROCEDURES ...

  • Jackson JPX-300NSU - page 22

    16 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) SECTION 5: SERVICE PROCEDURES RINSE SOLENOID VALVE REPAIR PARTS KIT These dishmachines are equipped with electrical solenoid valves to allow for automatic fill and rinse. These valves are designed to specific tolerances and design aspects that must be met in order to function properl ...

  • Jackson JPX-300NSU - page 23

    17 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) SECTION 5: SERVICE PROCEDURES RINSE SOLENOID VALVE REPAIR PARTS KIT (CONTINUED) 4. When replacing the coil, ensure that when removing the coil wire cover that care is taken not to damage the wires inside. Using the medium flathead screwdriver, gently use it to open the cover enough ...

  • Jackson JPX-300NSU - page 24

    18 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) SECTION 5: SERVICE PROCEDURES RINSE SOLENOID VALVE REPAIR PARTS KIT (CONTINUED) 13. Slowly remove the valve bonnet. Note: The spring for the plunger is located directly under the bonnet and may come free if you are not careful. Remove the plunger, spring and valve bonnet and place to ...

  • Jackson JPX-300NSU - page 25

    19 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) SECTION 5: SERVICE PROCEDURES RINSE SOLENOID VALVE REPAIR PARTS KIT (CONTINUED) 19. Using the small flathead screwdriver, lift out the screen retainer. Verify that the holes in it are free of clogs and debris. 20. Again using the small flathead screwdriver, carefully remove the mesh ...

  • Jackson JPX-300NSU - page 26

    20 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) SECTION 5: SERVICE PROCEDURES VACUUM BREAKER REPAIR PARTS KIT These dishmachines are equipped with vacuum breakers to serve as back-flow prevention devices. ASSE requirements specify what type of back-flow prevention is nec - essary on dishmachines. Vacuum breakers, unlike air gaps, ...

  • Jackson JPX-300NSU - page 27

    21 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) SECTION 5: SERVICE PROCEDURES VACUUM BREAKER REPAIR PARTS KIT (CONTINUED) 6. Your repair kit comes with a new plunger. Examine the old one and ensure that the mating surface is not damaged or cut. Also inspect the rubber seal on the top of the plunger to ensure it is in good conditi ...

  • Jackson JPX-300NSU - page 28

    22 SECTION 6: PARTS SECTION ...

  • Jackson JPX-300NSU - page 29

    23 SECTION 6: PARTS SECTION ELECTRICAL PANEL ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 11 Bushing, Snap 5975-210-03-00 21 Track, Terminal 6 7/8" 5700-021-62-91 32 End Clamp 5940-111-60-30 42 Contactor,Mini 5945-111-60-07 59 Screw, 10-32 x 3/8 Phillips Truss Round Head 5305-173-12-00 61 Track, Terminal 4 3/4" 5700-002-75-74 71 Decal, L1, L2, ...

  • Jackson JPX-300NSU - page 30

    24 SECTION 6: PARTS SECTION SWITCH PANEL ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 11 Switch Panel Weldment 5700-002-71-11 21 Decal, Control Panel 5700-002-75-75 31 Switch, Yellow Reed 5930-011-47-50 41 Decal, High Limit 9905-002-75-98 51 Switch, Prime 5930-002-68-27 61 Light, Amber 5945-504-06-18 72 Switch, Button DPDT 5930-002-43-44 82 Light, Red 59 ...

  • Jackson JPX-300NSU - page 31

    25 SECTION 6: PARTS SECTION SWITCH PANEL ASSEMBLY (WITH STAINLESS STEEL SWITCHES) ITEM QTY DESCRIPTION Mfg. No. 11 Switch Panel Weldment 5700-003-02-65 21 Decal, Control Panel 5700-002-75-75 31 Switch, Yellow Reed 5930-011-47-50 41 Decal, High Limit 9905-002-75-98 51 Switch, Prime 5930-003-05-30 61 Light, Amber 5945-504-06-18 72 Switch, ON/OFF 5930 ...

  • Jackson JPX-300NSU - page 32

    26 SECTION 6: PARTS SECTION KICK PANEL ASSEMBLY JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) Thermometer, Wash 48” 6685-111-68-48 Decal, Wash 9905-002-68-95 Fitting, 1/4” 4730-011-95-42 Pressure Hose Assembly 5700-002-72-17 Nylon Loop 4320-002-71-22 Locknut, 6-32 Hex S/S with Nylon Insert 5310-373-03-00 Hose, 5/16” x 12” L ...

  • Jackson JPX-300NSU - page 33

    27 SECTION 6: PARTS SECTION PLUMBING ASSEMBLY JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) Union, 1/2" C to C 4730-412-05-01 Nipple, 1/2" Close 4730-207-15-00 Valve, Solenoid 1/2" 220 volt 4810-100-09-18 Tee, 1/2 x 1/2 x 1/4 4730-411-25-01 Adapter, 1/2" Ftg. x Male 4730-401-03-01 Copper Tube, 1/2" x 1 1/4 ...

  • Jackson JPX-300NSU - page 34

    28 SECTION 6: PARTS SECTION PLUMBING ASSEMBLY (CONTINUED) JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) Vacuum Breaker 4820-300-07-00 Adapter, 1/2" Ftg. x Male 4730-401-03-01 Plug, 1/4” Brass 2 per machine 4730-209-01-00 Injector Weldment 5700-031-41-83 Fitting, Outlet Elbow 4820-111-51-18 Nut, P/P for 1/8” Tubing 4730-011 ...

  • Jackson JPX-300NSU - page 35

    29 SECTION 6: PARTS SECTION PLUMBING ASSEMBLY (CONTINUED) JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) Rinse Stiffener Weldment 5700-002-59-79 Locknut, 1/4”-20 S/S Hex with Nylon Insert 5310-374-01-00 Gasket, Manifold 5330-002-34-77 Gasket, Rinse 330-111-42-81 Rinse Hub Weldment 5700-021-38-31 Locknut, 1/4”-20 S/S Hex with Ny ...

  • Jackson JPX-300NSU - page 36

    30 SECTION 6: PARTS SECTION 1/2” SOLENOID VALVE & 1/2” NPT VACUUM BREAKER REPAIR PARTS KITS JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) Screw Data Plate Coil & Housing Valve Bonnet Spring & Plunger Kit 6401-003-07-40 Diaphragm Retainer Screen Retainer Mesh Screen Valve Body Complete 110 Volt Solenoid Valve Assembl ...

  • Jackson JPX-300NSU - page 37

    31 SECTION 6: PARTS SECTION DRAIN VALVE ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 11 Valve, With Brackets 5700-002-23-28 21 Hosebarb, 1” x 3/4” NPT Polypropylene 4730-011-65-86 31 Hosebarb, 90 B 1” x 3/4” NPT 4730-011-65-87 41 Plate, Motor Mounting Weldment 5700-031-96-02 54 Tricnut, 10-32 AK Fastener, S/S 5340-111-58-10 61 Lockwasher, #10 Ext ...

  • Jackson JPX-300NSU - page 38

    32 SECTION 6: PARTS SECTION DRAIN PLUMBING ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 13 Clamp, 3/16” to 1 1/2” 4730-719-06-09 21 Hose, Formed Drain 4720-121-40-36 32 Bolt, 10-32 x 1/2” Slotted Truss Head 5305-173-04-00 41 Diverter Valve Assembly 5700-002-23-21 51 Clamp, 11/16” to 1 1/4” 4730-002-18-40 61 Hose, 1” I.D. x 10 Feet Long 5700-0 ...

  • Jackson JPX-300NSU - page 39

    33 SECTION 6: PARTS SECTION WASH MOTOR TO WASH TUB ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 11 Hub, Discharge Machined 5700-021-37-90 21 Gasket, 2” O.D. x 1 1/2” I.D. x 1/16” 5330-200-23-00 31 Nut, Jam 1 1/2”-12 NPT 5700-000-86-23 44 Hose Clamp, 1 5/16" - 2 1/4" # 28 4730-719-01-37 51 Hose,1 1/4” x 2 1/4” Reinforced 5700-011-44- ...

  • Jackson JPX-300NSU - page 40

    34 SECTION 6: PARTS SECTION RINSE TANK & COMPONENTS JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) 40 °F Rise 70 °F Rise Volts Hz Phase Rinse Heater (8.2 KW) Rinse Heater (10 KW) 460 60 3 4540-111-51-46 4540-002-29-82 Thermostat, High Limit 5930-011-49-43 Decal, High Limit 9905-011-84-32 Thermostat, Rinse Tank 5930-121-71-29 D ...

  • Jackson JPX-300NSU - page 41

    35 SECTION 6: PARTS SECTION DOOR ASSEMBLY ITEM QTY DESCRIPTION Mfg. No. 11 Door Weldment 5700-002-59-37 21 Inner Door Weldment 5700-002-71-80 32 Bearing, Nyliner Standard Flanged 3120-002-71-66 42 Lockwasher, 3/8” S/S 5311-276-01-00 52 Locknut, 3/8”-16 S/S Hex with Nylon Insert 5310-011-72-55 62 Spring, Door 5340-011-44-58 72 Door Lever Weldmen ...

  • Jackson JPX-300NSU - page 42

    36 SECTION 6: PARTS SECTION RINSE ARM & WASH ARM ASSEMBLIES JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) Washer, Rinse Arm 5330-011-42-10 Rinse Arm 5700-031-38-30 Plug, Rinse Arm 4730-609-04-00 Bushing, Rinse Head 5700-021-33-84 Bearing, Rinse Head 3120-002-72-24 Ring, Retaining 5340-112-01-11 Wash Arm Weldment 5700-021-46-58 ...

  • Jackson JPX-300NSU - page 43

    37 SECTION 6: PARTS SECTION MISCELLANEOUS PARTS JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) Rail, Right Rack 5700-002-59-94 Rail, Left Rack 5700-002-59-93 Back Panel 5700-031-44-33 Strainer Spacer 5700-002-70-60 Attaches with: Nut, Nylon Wing, 1/4”-20 5310-994-01-00 Strainer Weldment 5700-031-35-81 Left Hinge Plate Weldment 57 ...

  • Jackson JPX-300NSU - page 44

    38 SECTION 6: PARTS SECTION FRAME, & PANEL COMPONENTS JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) Right Frame Weldment 5700-002-59-36 Left Frame Weldment 5700-002-59-35 The swivel feet used on the unit may be ordered using 5340-002-71-71 Right Dress Panel 5700-002-71-07 Left Dress Panel 5700-002-71-03 Top Panel 5700-002-71-10 ...

  • Jackson JPX-300NSU - page 45

    SECTION 7: ELECTRICAL DIAGRAMS 39 ...

  • Jackson JPX-300NSU - page 46

    40 SECTION 7: ELECTRICAL DIAGRAMS JPX-300NSU 460 VOLT, 60 HERTZ, THREE PHASE JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005)) ...

  • Jackson JPX-300NSU - page 47

    41 SECTION 7: ELECTRICAL DIAGRAMS JPX-300NSU 460 VOLT, 60 HERTZ, THREE PHASE (WITH STAINLESS STEEL SWITCHES) JPX-300NSU Technical Manual 7610-002-75-96 Rev. E (08/16/2005) ...

Manufacturer Jackson Category Dishwasher

Documents that we receive from a manufacturer of a Jackson JPX-300NSU can be divided into several groups. They are, among others:
- Jackson technical drawings
- JPX-300NSU manuals
- Jackson product data sheets
- information booklets
- or energy labels Jackson JPX-300NSU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jackson JPX-300NSU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jackson JPX-300NSU, service manual, brief instructions and user manuals Jackson JPX-300NSU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jackson JPX-300NSU.

Similar manuals

A complete manual for the device Jackson JPX-300NSU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jackson JPX-300NSU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jackson JPX-300NSU.

A complete Jackson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jackson JPX-300NSU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jackson JPX-300NSU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jackson JPX-300NSU, that we can find in the current document
3. Tips how to use the basic functions of the device Jackson JPX-300NSU - which should help us in our first steps of using Jackson JPX-300NSU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jackson JPX-300NSU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jackson JPX-300NSU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jackson JPX-300NSU?

Use the form below

If you did not solve your problem by using a manual Jackson JPX-300NSU, ask a question using the form below. If a user had a similar problem with Jackson JPX-300NSU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)