English dropdown-ico

Manual Sharp PNK321

37 pages 3.27 mb
Download

Go to site of 37

Summary
  • Sharp PNK321 - page 1

    PN-K321 LCD MONIT OR OPERA TION MANUAL ...

  • Sharp PNK321 - page 2

    IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONL Y ...

  • Sharp PNK321 - page 3

    3 E IMPORT ANT INFORMA TION W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ash wit ...

  • Sharp PNK321 - page 4

    4 E Thank you for your purchase of a SHARP LCD product. T o ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly ...

  • Sharp PNK321 - page 5

    5 E SAFETY PRECAUTIONS (Continued) W ARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. T o maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal and Display ...

  • Sharp PNK321 - page 6

    6 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology . However , there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but ...

  • Sharp PNK321 - page 7

    7 E MOUNTING PRECAUTIONS • Thisproductisforuseindoors. • A mountingbracketcompliantwithVESA specicationsis required. • T oinstallonastand(commerciallyavailable)oronawall, ortoremoveormovethemonitor ,consultyourdealer . • Moun ...

  • Sharp PNK321 - page 8

    8 E Supplied Components If any component should be missing, please contact your dealer .  Liquid Crystal Display Monitor: 1  Power cord: 1  AC adapter: 1  CD-ROM (Utility Disk for Windows): 1  Setup Manual: 1  DisplayPort cable: 1  RS-232C conversion cable (Φ3.5 mini-jack): 1  Pedestal (for stand): 1  Strut (for stand): ...

  • Sharp PNK321 - page 9

    9 E n Front view 1 2 1. LCD panel 2. Power LED (See page 15.) Part Names n Rear view 12 4 5 6 7 8 9 2 3 12 11 10 13 14 15 16 17 18 19 1. Speakers 2. V ents 3. Attachment plate (for stand) 4. RS-232C input terminal (See page 12.) 5. PC/A V HDMI 1 input terminal (See page 12.) 6. PC/A V HDMI 2 input terminal (See page 12.) 7. DisplayPort input termin ...

  • Sharp PNK321 - page 10

    10 E Installing the stand (supplied) Caution • Disconnect all cables from the monitor . • Firmly tighten the installat ion screws (supplied) with the hex wrench (supplied). • Ensure that you have sufcient space to work. n Attaching the stand Remove all packaging materials before starting work. T o prevent the table (etc.) from being damage ...

  • Sharp PNK321 - page 11

    11 E n Height/angle adjustment • Adjusting the height  Adjusttoaheightthatiseasytoview . Approx. 5-29/32inch (15cm) TIPS • Theheightcannotbeadjustedinaverticalinstallation. • Adjustingtheangle  Adjusttoananglethatiseasytoview . Approx.45° Approx.25° ...

  • Sharp PNK321 - page 12

    12 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally rever ...

  • Sharp PNK321 - page 13

    13 E Connecting the Power Cord Caution • Use only the power cord and AC adapter supplied with the monitor . 1. T urn of f the main power switch. 2. Connect the AC adapter (supplied) to the power cord (supplied). 3. Connect the AC adapter (supplied) to the AC input terminal. 4. Plug of the power cord (supplied) into the AC power outlet. 3 4 2 1 Ma ...

  • Sharp PNK321 - page 14

    14 E Binding Cables n Fastening the cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamps to the attachment parts on the back of the monitor and the stand, and bind the cables. Cable clamp Cable clamp attachment Cable Cable clamp (small) Cable clamp attachment Cable Cab ...

  • Sharp PNK321 - page 15

    15 E Caution • T urn on the monitor rst before turning on the PC or playback device. T urning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • When switching the main power s ...

  • Sharp PNK321 - page 16

    16 E Basic Operation 1 2 3 4 5 6 7 1. Power button ( ) Press this button to turn the power ON/OFF . 2,3. Brightness adjustment button ( / ) The brightness menu appears. BRIGHT 15 Adjust the brightness with the brightness adjustment button ( / ). * If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. Move th ...

  • Sharp PNK321 - page 17

    17 E Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it lls the entire screen. A V input An image with a 4:3 aspect ratio is stretched to ll the entire screen. NORMAL PC input Displays image so it lls the screen ...

  • Sharp PNK321 - page 18

    18 E Menu Items Displaying the menu screen Video adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 19 to 21 for details of each menu items. Caution • Donotturnthemainpowerswitchoffwhilethemenuitems arebeingdisplayed.Doingsomay ...

  • Sharp PNK321 - page 19

    19 E Menu item details The menu will differ depending on the input mode. n PICTURE BRIGHT Adjusts the backlight brightness. CONTRAST Adjusts the difference between the bright and dark portions of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. TINT Adjusts the hue. Selecting + changes the color towards green, and selectin ...

  • Sharp PNK321 - page 20

    20 E n SETUP LANGUAGE Sets the display language for the menu screen. INPUT SELECT HDMI1/HDMI2 Select the input modes to be used for the PC/A V HDMI1 and HDMI2 input terminals. HDMI DUAL T o use HDMI DUAL, select ON. AUDIO SELECT Selects the terminal used to input audio signals in each input mode. When HDMI DUAL is used, the HDMI1 settings are appli ...

  • Sharp PNK321 - page 21

    21 E Menu Items n OTHERS SCREEN MOTION P A TTERN Residual images are reduced by moving the screen. OFF ................. SCREEN MOTION function is disabled. P A TTERN1 ...... A black screen spreads from the bottom of the screen and then shrinks to the bottom of the screen. If the monitor is installed in the portrait orientation, a black screen spre ...

  • Sharp PNK321 - page 22

    22 E Menu Items n Dual screen display T wo screens can be displayed by selecting PbyP mode. Set this function with “PbyP MODE” in the PbyP menu. PbyP Main screen Sub screen A main screen and a sub screen are display ed in a line. * The currently selected input signal is displayed on the main screen. * The following combinations are available fo ...

  • Sharp PNK321 - page 23

    23 E Y ou can return the settings to their factory-preset values and restrict operations. 1. Hold down the [MENU/ENTER] button and [INPUT/ RETURN] button at the same time until “F” appears in the screen, and then press the [MENU/ENTER] button and [VOL-/ ] button at the same time while “F” appears. ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ...

  • Sharp PNK321 - page 24

    24 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. PC connection Connect the COM port on the PC (RS-232C connector) to the CONTROL terminal (RS-232C input terminal) on the monitor using the RS-232C conversion cable (supplied) and an RS- 232 straight cable (commercially availabl ...

  • Sharp PNK321 - page 25

    25 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. When a command has not been executed R R E Return code (0D H , 0A H ) TIPS • “ERR” is returned when there is no relevant command or when the comma ...

  • Sharp PNK321 - page 26

    26 E RS-232C command table How to read the command table Command: Command eld (See page 24.) Direction: W When the “Parameter” is set in the parameter eld (See page 24.), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?? ...

  • Sharp PNK321 - page 27

    27 E PICTURE menu Function Command Direction Parameter Reply Control/Response contents * BRIGHT VLMP WR 0-31 0-31 ○ CONTRAST CONT WR 0-60 0-60 BLACK LEVEL BL VL WR 0-60 0-60 TINT TINT WR 0-60 0-60 COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 COLOR ADJUSTMENT COLOR MODE BMOD WR 0 0 STD ○ 2 2 VIVID 3 3 sRGB (When the input mode is PC) WHI ...

  • Sharp PNK321 - page 28

    28 E SETUP menu Function Command Direction Parameter Reply Control/Response contents * LANGUAGE LANG WR 14 14 ENGLISH ○ 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 IT ALIANO 4 4 ESP AÑOL 5 5 РУССКИЙ 6 6 INPUT SELECT HDMI1 HDSL WR 0-1 0-1 0: PC HDMI, 1: A V HDMI ○ HDMI2 H2SL WR 0-1 0-1 0: PC HDMI, 1: A V HDMI HDMI DUAL HDDU WR 0-1 0-1 0: OFF , 1: ON A ...

  • Sharp PNK321 - page 29

    29 E Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0 - ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF , 1:ON 1, 2:ON 2 ○ OSD DISPLA Y LOSD WR 0-2 0-2 0: ON 1, 1: OFF , 2: ON 2 ○ LED OFLD WR 0-1 0-1 0: ON, 1: OFF ○ TEMPERA TURE ALERT T AL T WR 0-2 0 ...

  • Sharp PNK321 - page 30

    30 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord properly connected? (See page 13.) • Is the main power switch off? (See page 15.) • Is the monitor in standby mode (power ...

  • Sharp PNK321 - page 31

    31 E Specications n Product Specications Model PN-K321 LCD component 32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD Max. resolution (pixels) 3840 x 2160 Max. colors Approx. 1.07 billion colors Pixel pitch 0.182 mm (H) × 0.182 mm (V) Viewing angle 176 ° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 27-31/6 ...

  • Sharp PNK321 - page 32

    32 E Specications n Dimensional Drawings Note that the values shown are approximate values. • Landscape 3-15/16 [100] 3-15/16 [100] Opening height (15-9/16 [395]) * Opening width (27-9/16 [700]) *Adjustable (19-17/64~24-31/32 [489~634]) 29-17/32 [750] 10-3/32 [256] 15-23/32 [399] Unit: inch [mm] 3-15/16 [100] 3-15/16 [100] 17-3/8 [441] 1-25/64 ...

  • Sharp PNK321 - page 33

    33 E n Compatible signal timing (PC) VESA Wide US TEXT 640×480 800×600 848×480 1024×768 1 152×864 1280×768 1280×800 1280×960 1280×1024 1360×768 1400×1050 1600×1200 1680×1050 1920×1200 3840×2160 4096×2160 *2 1280×720 1920×1080 720×400 60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 75Hz 60Hz 60Hz 60Hz 75Hz 60Hz 60 ...

  • Sharp PNK321 - page 34

    34 E n Compatible signal timing (A V) Screen resolution Frequency HDMI 1920 × 1080p 24Hz Ye s 50Hz Ye s 59.94Hz Ye s 60Hz Ye s 1920 × 1080i 50Hz Ye s 59.94Hz Ye s 60Hz Ye s 1280 × 720p 50Hz Ye s 59.94Hz Ye s 60Hz Ye s 720 × 576p 50Hz Ye s 720 × 480p 59.94Hz Ye s 60Hz Ye s 640 × 480p(VGA) 59.94Hz Ye s 60Hz Ye s 720(1440) × 576i 50Hz Ye s 720( ...

  • Sharp PNK321 - page 35

    35 E n DisplayPort input terminal pins (DisplayPort 20 pin) No. Function No. Function 1 MainLane 3- 11 Gnd 2 Gnd 12 MainLane 0+ 3 MainLane 3+ 13 Gnd 4 MainLane 2- 14 Gnd 5 Gnd 15 Aux+ 6 MainLane 2+ 16 Gnd 7 MainLane 1- 17 Aux- 8 Gnd 18 Hot-plug detection 9 MainLane 1+ 19 Gnd 10 MainLane 0- 20 3.3V n PC/A V HDMI input terminal pins (HDMI TM Connecto ...

  • Sharp PNK321 - page 36

    36 E • When installing, removing or moving the monitor , ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor . • This monitor is designed to be installed on a concrete wall or pillar . Reinforced work might be necessary for some materials such as plaster / ...

  • Sharp PNK321 - page 37

    PN-K321 Mu EN13A(1) ...

Manufacturer Sharp Category Computer Monitor

Documents that we receive from a manufacturer of a Sharp PNK321 can be divided into several groups. They are, among others:
- Sharp technical drawings
- PNK321 manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp PNK321
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp PNK321.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp PNK321, service manual, brief instructions and user manuals Sharp PNK321. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp PNK321.

Similar manuals

A complete manual for the device Sharp PNK321, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp PNK321 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp PNK321.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp PNK321 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp PNK321, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp PNK321, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp PNK321 - which should help us in our first steps of using Sharp PNK321
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp PNK321
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp PNK321 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp PNK321?

Use the form below

If you did not solve your problem by using a manual Sharp PNK321, ask a question using the form below. If a user had a similar problem with Sharp PNK321 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)