English dropdown-ico

Manual Nintendo APS 996a

28 pages 0.3 mb
Download

Go to site of 28

Summary
  • Nintendo APS 996a - page 1

    128-6773 1 of 28 Model APS 996a Installation Manual PRELIMINARY SELECTABLE FEATURES Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual. RF Programmable Featur ...

  • Nintendo APS 996a - page 2

    128-6773 2 of 28 THIS PAGE INTENTIONALLY LEFT BLANK ...

  • Nintendo APS 996a - page 3

    128-6773 3 of 28 Eighth Press and release the valet switch 1 chirp = siren and horn output Press transmitter Lock button to change 2 chirps = siren output only Press transmitter lock button to change 3 chirps = horn output only or Ninth Press and release the valet switch 2 chirps = horn chirp output 16mS Press transmitter Lock button to change 3 ch ...

  • Nintendo APS 996a - page 4

    128-6773 4 of 28 hood switch is required for the safety shut down of the remote start unit. If the vehicle is being worked on, this hood switch prevents the remote start activation even if the RF command to start is issued. This switch must be installed in all applications. Failure to do so may result in personal injury or property damage. Mount th ...

  • Nintendo APS 996a - page 5

    128-6773 5 of 28 SHOCK SENSOR: Select a centrally located, solid mounting surface for the shock sensor that will allow consistent opera- tion from all areas of the vehicle. The selected location must be within 18" of the control module to allow routing and connecting of the 4 pin harness. Secure the shock sensor to the chosen location using tw ...

  • Nintendo APS 996a - page 6

    128-6773 6 of 28 YELLOW Wire: Starter Output Careful consideration for the connection of this wire must be made to prevent the vehicle from starting while in gear. Understanding the difference between a mechanical and an electrical Neutral Start Switch will allow you to properly identify the circuit and select the correct installa- tion method. In ...

  • Nintendo APS 996a - page 7

    128-6773 7 of 28 WIRING CONNECTIONS: Multi Pin Accessory Input/Output Harness White w/ Red Trace Wire: Parking Light Flasher Feed This wire is the common contact of the on board parking light flasher relay. If the vehicle you are working on has +12 volt switched parking lights, connect this wire to a fused + 12 volt source. (Max. 15 Amps) NOTE: If ...

  • Nintendo APS 996a - page 8

    128-6773 8 of 28 White w/ Black Trace Wire: (+) Siren Output This is the positive siren feed wire. Route this wire through a grommet in the firewall to the siren location. Connect the White w/ Black Trace wire to the Red wire of the Siren. Secure the Black wire of the Siren to a known chassis ground or solid clean metal surface. Siren Wiring Detail ...

  • Nintendo APS 996a - page 9

    128-6773 9 of 28 Light Blue Wire: Ignition 3 Output This wire provides a 300mA ground output that becomes active 3 seconds before the Remote Start Unit initializes and remains grounded while running plus an additional 4 seconds after the Remote Start Unit turns off. In all of the applications described below, a relay will be required. The Light Blu ...

  • Nintendo APS 996a - page 10

    128-6773 10 of 28 9 Green w/ White trace Wire: Entry Illumination Ground Output This wire provides a 30 second ground output (300 mA Max.) whenever the remote is used to disarm the alarm or to unlock the doors and provides a continuous pulsed output whenever the alarm is triggered. This wire should be connected to an external relay and wired to the ...

  • Nintendo APS 996a - page 11

    128-6773 11 of 28 Orange Wire: Ground When Armed Output This wire provides a 300 mA ground output when the alarm circuit is armed to control the starter inhibit relay. Connect the Orange wire to terminal #86 (orange wire) of the relay provided. Connect terminal #85 (red wire) of the relay to an ignition wire in the vehicle that is +12 volts when th ...

  • Nintendo APS 996a - page 12

    128-6773 12 of 28 11 Green w/ Orange Trace Wire: Tachometer Input Signal This wire will continually monitor the engine's tach rate while the unit is under power of the Remote Start module. This wire will be routed to the vehicle ECM tach input or through the firewall into the engine compartment and connect to the negative side of the ignition ...

  • Nintendo APS 996a - page 13

    128-6773 13 of 28 Dark Blue Wire: Delayed 300mA Pulsed Channel 3 Output The Dark Blue wire supplies a 300mA ground pulsed output whenever channel three of the receiver is accessed. Pressing the pre-programmed transmitter button for three seconds will access channel two. This is a low current output and must be connected to a relay to supply power t ...

  • Nintendo APS 996a - page 14

    128-6773 14 of 28 13 NOTE : This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle. Lt Gre ...

  • Nintendo APS 996a - page 15

    128-6773 15 of 28 14 Black w/ Yellow Trace Wire: Ground Output During Start (Crank) The Black w/ Yellow Trace wire will provide a 300 mA ground output while the starter output of the remote start unit is active. This output can be used to activate the Crank Low/Bulb Test wire found in some GM vehicles. This wire is also referred to as the ECM wake ...

  • Nintendo APS 996a - page 16

    128-6773 16 of 28 15 3 Wire Positive Switched Door Locks: In this application, the Red wire of the door lock harness provides a + 12 volt pulse during the disarming sequence, or pulsed 12 volt unlock output. Connect the Red wire to the low current 12 volt signal wire from the factory door unlock switch to the factory door unlock relay. The Green wi ...

  • Nintendo APS 996a - page 17

    128-6773 17 of 28 The Red/Black wire provides a pulse ground output when the unlock button of the transmitter is pressed a second time after disarming. Connect the Red/Black wire to the wire that provides a low current ground signal from the factory door unlock switch to the factory door unlock control relay. 3 Wire Positive Switched 2 Step Door Lo ...

  • Nintendo APS 996a - page 18

    128-6773 18 of 28 17 NOTE: Resistive Circuits, As Well As 4 Wire Polarity Reversal and 5 Wire Alternating 12 Volt Door Lock Control Circuits These applications require the use of additional components which may include relays, fixed resistors, or for convenience, the AS 9159 Door Lock Interface. Refer to the AUDIOVOX Door Lock Wiring Supplement and ...

  • Nintendo APS 996a - page 19

    128-6773 19 of 28 18 START PROGRAM : The Remote Start unit has the ability to start the vehicle automatically at timed intervals. This feature is useful in extremely cold climates where starting the engine is the only means to keep the battery charged and fluids warm. The operator has the option to have the unit start every 2 or 4 hours for a maxim ...

  • Nintendo APS 996a - page 20

    128-6773 20 of 28 times in succession. The parking lights will flash, and the siren will chirp 3 times confirming that selected feature 3 can be changed. 7 . Use the start button on the transmitter to change the selection of the programmable feature. If you are not sure what the setting for any feature is, press the start button one time, the parki ...

  • Nintendo APS 996a - page 21

    128-6773 21 of 28 TESTING YOUR INSTALLATION: WARNING!! The following procedure must be performed after the installation of an Audiovox Remote Start Device. It is the responsibility of the installing technician to complete these tests. Failure to test the unit in the following manner may result in personal injury, property damage, or both. HOOD PIN ...

  • Nintendo APS 996a - page 22

    128-6773 22 of 28 21 To test the integrity of the Neutral Start Safety Circuit: 1. Set the vehicle parking brake. 2. Block the drive wheels to prevent vehicle movement. 3. Temporarily disconnect the Brown/Black positive shut down wire from the vehicle's brake switch. 4. Sitting in the vehicle, start the engine using the vehicle's ignition ...

  • Nintendo APS 996a - page 23

    128-6773 23 of 28 CAUTION! REMEMBER TO RECONNECT THE BROWN/BLACK WIRE TEMPORARILY DISCONNECTED IN STEP 3 DO NOT RELEASE THIS VEHICLE TO THE CONSUMER UNTIL YOU CONFIRM THE OPERATION OF THE NEUTRAL SAFETY START FEATURE. KEY IN SENSOR CIRCUITS: If the vehicle you are working on does not have or you cannot locate the ECM reference wire, there are two a ...

  • Nintendo APS 996a - page 24

    128-6773 24 of 28 23 METHOD 2 To connect to the key in sensor circuit as shown for method 2: A. Locate the control wire that connects the drivers door pin switch to the key in sensor switch. B. Cut this wire and connect the ignition cylinder side to chassis ground. C. Locate the key in sensor switch wire that connects the chime module to the igniti ...

  • Nintendo APS 996a - page 25

    128-6773 25 of 28 COMPLETING THE INSTALLATION: After you have confirmed the operation of the Audiovox Remote Start unit and tested all the safety features of the system: NOTE: This unit has the ability to learn the dome light delay time, up to 60 seconds. If the vehicle has delay interior lights, and you wish to avoid three chirp, defect zone, indi ...

  • Nintendo APS 996a - page 26

    128-6773 26 of 28 128-6773 25 ...

  • Nintendo APS 996a - page 27

    128-6773 27 of 28 THIS PAGE INTENTIONALLY LEFT BLANK ...

  • Nintendo APS 996a - page 28

    128-6773 28 of 28 © 2003 Audiovox Electronics Corp., Hauppauge, NY 11788 128-6773 WWW .audiovox.com For Customer Service Visit Our Website At Product Information, Photos, FAQ’s Owner’s Manuals ...

Manufacturer Nintendo Category Automobile Accessories

Documents that we receive from a manufacturer of a Nintendo APS 996a can be divided into several groups. They are, among others:
- Nintendo technical drawings
- APS 996a manuals
- Nintendo product data sheets
- information booklets
- or energy labels Nintendo APS 996a
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nintendo APS 996a.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nintendo APS 996a, service manual, brief instructions and user manuals Nintendo APS 996a. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nintendo APS 996a.

Similar manuals

A complete manual for the device Nintendo APS 996a, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nintendo APS 996a by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nintendo APS 996a.

A complete Nintendo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nintendo APS 996a - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nintendo APS 996a, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nintendo APS 996a, that we can find in the current document
3. Tips how to use the basic functions of the device Nintendo APS 996a - which should help us in our first steps of using Nintendo APS 996a
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nintendo APS 996a
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nintendo APS 996a in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nintendo APS 996a?

Use the form below

If you did not solve your problem by using a manual Nintendo APS 996a, ask a question using the form below. If a user had a similar problem with Nintendo APS 996a it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

aizhamal

не знаю как вкл режим жарки???